Hi,
I wanted to flash to my Touch Pro 2 an android. I unlocked it so know when I enter bootloader (3 colors screen) I see this:
Security Unlocked
RHOD*** 32M SS-BC
SPL-0.85.OliNex
MIcroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
515,531 820,873
830,170 196,183
196,874 Calibrated
When I connect this phone by USB to PC It says URB. I cannot flash any rom thru SD Cards because it's stuck on grey area with Loading sign and that's it for sd card
When I try to flash via PC it stuck on 0% and not going further.
When I try to just power on the phone I see just black screen with Touch Pro 2 inscription and then the phone turns off.
Please help because I don't know what to do to install special RHODIMG.nmg for android, I can not even install difrent rom's.
Related
Hi there
I have a big problem with a black X01HT
This is sim unlocked and SuperCID. I flashed it with latest TyTN original Ship Rom and phone works fine for 3 hours with phone calls and software instalation included.
However, the phone shut down without reason and now only a white screen appear. Phone power on but No splash screen appear, ex. no HTC logo, not radio or any numbers at boot screen, no windows screeen. Also I can´t enter to bootloader mode.
Any idea for fix it?
hi,
i tried freflashing the WM5 rom but got connection error while doing it and now it stuck at the bootloder mode.tried doing it all over again but the device keeps on turning off after a while and then turn on again and everytime it tuns off i get the connection error msg.tried chargin the device but theres no red lght indicator when charging..the device will keep on on and off by itself..
pls help
Charge the device (using the mains supply or a battery charger).
Start the device up, and then manually enter bootloader.
Then, follow this http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Since you can enter bootloader, it should be relatively easy to fix.
Prophet stuck at bootloader
Hello Friends...
While Trying to update my prophet rom something really wiered happened to it... after installing new roms it comes back to RGB colour screen and only shows IPL 1.00 & SPL 3.08.0001 moreover it says "Format is Failed"
is it possible for a device having G3 IPL and G4 SPL ?...
Please Help me out what should i do now ?...
Hello, I flashed athena ap4 rom
and stuck at gray loading screen
-the one that was suppose to show percent progress but now stuck there
and said "loading"
-when i get back to bootloader using hardward button
-it will get there and go straight to gray loading screen again
-flashing using sdcard was unsuccessful also
any suggestiosn, thanks
Remove minisd & sim card from your device
Go to bootloader using hardware button
Connect your device to PC using USB cable and then try to flash a new Rom
Good Luck...
Fixed! Thanks for you help!!
HELP
Solved after retrying a few times...now is really looking at Hard SPL the device so that I can change the ROM from CHT to ENG...
Thanks.
Hi all,
I have searched all over and can't figure out what is my problem. Any help would be greatly appreciated. I have TMO US H2. I've been trying to flash my phone for a few hours to no avail. I have tried to flash a few different ROMs via ActiveSync and I get an error saying it lost connection after it tries to access the bootloader. I then tried to flash it via the SD card, but can't get past the tri color screen, even with a signed ROM.
The tri-color screen shows the following:
PB81120 HX-B3
SPL-2.00.HSPL 8G XE
0x05
Cotulla aHSPL 0x50
Can anyone tell me why I can't seem to get past this screen when trying to flash a ROM?
Sounds like a task for task29. Search for it in this forum, and after you perform it - load a proper rom to your device.
I tried task29 but when it gets to the bootloader it gets stuck on the tricolor screen and says USB at the bottom, just like all the other times I tried to flash it. I get the following error message:
Error [302] - Update Error
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue with the update.
What am I doing wrong? I keep seeing this error message every time.
so you can't even load a ROM from the sd card? that eliminates a bad usb.
You put a Rom image on the root of your sd card (usually needs to be 8gb or smaller). You make sure it is named LEOIMG.nbh. While pressing in the reset button (by the battery), you hold down the volume down button. Your phone should go into bootloader (tricolored) momentarily, then switch to a grey screen that asks if you want to update. press power for yes or vol up? for no. You press the red (phone call end button) and it errors? Is this what happens?
many people report the supplied 16gb card doesn't work for flashing.
for usb flashing, enter bootloader manually. wait for serial to become usb, and then run the flash.
im having the same problem. i have hardspl, i falshed a radio 2.07.50 just fine, then i tried flashing the rom via computer, the bootloader screen would not display the grey coloured screen where you 'update image' and it said lost connection on my computer. I then tried the sd card way, LEOIMG.nbh, same result - no grey screen to 'update image'
i tried to install wp7 with "tg downloader" (for the boot) and "common downloader" (for the flash). i had some problem to put the TG01 in FTM then the only chance was to use pin 1,3. i followed the guide, installed the boot file,the progrma said "done" also if it stopped at 99%. then after that i falshed the flash.bin but wp7 wont start. so i tried to come back to wm 6.5 but maybe the battery was not full (?) and the TG01 went in "black screen with green led".
my phone no conect pc??
help me???
no one help me?