i tried to install wp7 with "tg downloader" (for the boot) and "common downloader" (for the flash). i had some problem to put the TG01 in FTM then the only chance was to use pin 1,3. i followed the guide, installed the boot file,the progrma said "done" also if it stopped at 99%. then after that i falshed the flash.bin but wp7 wont start. so i tried to come back to wm 6.5 but maybe the battery was not full (?) and the TG01 went in "black screen with green led".
my phone no conect pc??
help me???
no one help me?
Related
I have been trying some ROMS of this forum and in one of these my rw6815 did not start. The screen was black and it doesn´t started when I pushed the "on button".
Afterwards, I read lots of post and discovered that I could start bootloader mode with "camera+push battery". I tried to put again a stable ROM by using a SD card in this mode but when setup finished my pda show hp logo and restart.
I saw the bootloader versión was 0.00.00 so I decided to put BL 1.01 to recover my PDA. I did it using el bootloader mode and tried to install another ROM. This time I used the (-) buttos+reset+"on button". The HP logo was showed and it was a long long time... and never finished, so I decided to pull the battery. When I tried to star the bootloader mode with "camera+push battery" my PDA didn´t response. Now, it doesn´t start in this mode.
What can I do?
Oh, a strange thing I have noticed is that the hp logo and the bootloader mode seems to be interlaced... I mean, the screen is not clear, you can see something like a interlaced screen... It didn´t happen when I put in a stable ROM and the hp logo restart on start.
PD: Sorry for my English
PD2: I just have discover that if a push the two (-) buttos and put the battery the screen shows the hp logo and PBL 1.0.1
me too
Have you found solution for this?
Hai everybody, i am a new member to forums, so i am intereseted
and want to gain knowledge on this topics..........................thank u
these are my problems when i accidentally flashed a not so clean rom and unstable one:
1.) when the official screen logo welcome appears... it doesn't show any information about the rom like
ipl 2.xx
spl 2.xx
radio etc..
the welcome logo screen itself.
2.) i cannot charge my phone when it is turned on. the only way is to turn it off..
-this gives me another problem when it comes to syncing my 02 xda atom.. since it does not recognize any usb connections when it is turned on..
3.) wifi doesn't turn on?,, when i tap the toggle in the comm manager, loading icon will show for about 10-15 seconds and leave the wlan still turned off,,
i tried to flash helloworld wm6.1 using sd card since my 02 atom cannot recognize any usb connections when it is turned on.. in bootloader mode i've waited for 20 mins as it is expected to boot for that span. but still nothing happened. it did not work. bootloader mode did not show any sign of progress.
i've read some threads that there are registry edits that disables charging through usb connection.. but can't find it in the net.. any idea??
any possible solutions??
help!!!
thanks....
try to soft reset your device, if you still get the same problem go to the bootloader (three color screen) then reflash again ..! try the Flash ROM by manufacturing your device... good luck prince
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
try a hard reset. turn the phone off, hold down both volume buttons, and turn the phone on, keeping the vol buttons held down. then when prompted,press vol up to reset it.
yes, you'll lose any data and modifications on your phone, it will be back to how it was right after you flashed it, but at least it will start up. better than how it is now, right?
nishankyadav said:
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
Click to expand...
Click to collapse
What an utterly unfortunate situation!! Couple of questions/remarks:
1. Did you install HTC 3.14 ROM with your S/N from HTC's website before flashing Artemis?
2. You already removed HSPL, so I would advice to extract the 3.14 RUU file to your desktop and copy the custom.nbh file to your SD Card after having it renamed to leoimg.nbh (insert SD CArd into PC to do that).
3. Reinsert SD card in device and enter bootlader mode and the installation of 3.14 should start automatically.
4. After that download Artemis 43 and extract it to the folder where you're SSPL_RUU,exe resides. Bothe the custom.nbh and the SSPL file must be in the same folder!
6. Start SSPL_RUU and flash Artemis
7. After that first a hard reset and then a soft reset.
Also read page 1 - Flashing notes
This should to it for you,
regards, Kuzibri
P.S. I posted this also in Artemis thread
same problem
i've got the same problem, but i didn't install the rom artemis,
i restart the installation many time but i've got always the same problem
the display showing loading..... please wait with the chucky logo.
someone can help me???????
thank you
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
you want the original rom from i-mate to setup in your pocket pc because your phone is locked with security you shoud make HardSPL to setup any rom on your phone
azhar63 said:
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
Click to expand...
Click to collapse
try a hard reset (hold camera and comm manager and power) it will powers up telling you that it will format the drive.
press yes (green call key) then see if it will boot up
if not:
then do the following
http://forum.xda-developers.com/wiki/index.php?title=Prophet_recovery
Hello, dear xda users. I am kinda new in Android world- i bought HTC phone month ago and i tried to get used for it. My phone is polish version of T-Mobile G2 and its called ERA G2. I rooted it, installed Amon-Ra and tried a lot of custom ROMs. After month of using different kind of Android and HTC ROMs i stayed with RCMix 2.3, because of his speed and 2.1 Sense on it. And now my problem begins:
Today my menu button stoped working in some applications so i decided to reboot device. Everything went fine with getting off, but when phone vibrated and Era initializing screen appeared, nothing happened after that.
-I tried with removing SIM, SD and all other options but still it is frozen. After couple minutes its vibrating again and restarts.
-When i plug charger for turned off phone, charging led is on but at the same time i am turning on phone, led disappears (phone is still plugged to charger).
-I cannot go to recovery by holding Home+Power... nothing happens.
-When i am holding VOL Down and Power this unknown for me HTC/Android window appears but automatically starts some kind of loading, and when its in Simlock and opening FAT32 something it restarts and Era initialization screen is on again.
-Unfortunately i dont have any warranty for this phone and i am from Poland so professional technical support is the worst way of helping for me right now.
I really enjoyed HTC Hero and i want to enjoy it more, so please if you know any way or kind of solution, please reply ; ) [sorry for my english]
Do You have adb set up?
By nothing happends You mean it wont turn on, or it wont run recovery?
Sent from my Hero using XDA App
remove battery and put it back again. This will turn off the phone. Then try Power it up. Do you get into bootloop again?
What about recovery? Replace battery and power up into recovery. 2 things might happen. You can get into your recovery normally and reflash the rom. Or you might get a screen with a phone and a big red exclamation mark. In this case you've lost your recovery and need ruu install.
brat.haneq---> i ment that i cant go to recovery- i have initialization screen and nothing happens.
So, first of all i restarted my phone a lot of times in different combinations (with SIM, without SD etc.). I cannot get to recovery when i am pressing power+home buttons and nothing happens, no exclamation mark like arvan said. I just see blue initialization screen from Era (it says Era G2 Touch)as always. Normally after some seconds it dissapears and normal bootscreen from ROM shows up, but not this time. Any thoughts?
Oh, and what is adb set up? Cheers ; )
So I guess You've really lost the recovery.... And as I said, RUU install will help...
Okay, but how i can install RUU? I tried from PC but Windows doesnt see my device... Any other option?
have you got the drivers? they come with htc sence. what does your pc see instead of hero? there might be some unknown device in the device manager if it's a driver problem.
Install RUU form SDcard (extract ROM.zip from RUU, rename it to HEROIMG.zip and put it to root of SDcard) using HBOOT mode.
There's a guide explaining the steps here http://forum.xda-developers.com/showthread.php?t=714519