Related
So guys, since I've unlocked the bootloader for my Xperia S (LT26i), installed lotsa custom ROMs and Kernels, and recovered the stock ROM backup, I'm having the same problem:
1 - Can't install Chainfire 3D from market or APK (Not enough space)
2 - It's slow as **** to install something, downloading from market is almost impossible
3 - Everytime I restart, I have my data wiped
If someone knows what's happening, please help me. I've tried recovering my stock rom backup, installed a lot of ROMs, with different kernels, and always having the same problem.
Actually using:
KA09 ROM
SSpeed Kernel v2
EDIT: Sometimes I can't see everything in storage from my computer.
Try factory reset and if this doesn't help flash a firmware using flashtools.
Sent from my LT26i using Tapatalk 2
gm007 said:
Try factory reset and if this doesn't help flash a firmware using flashtools.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Factory reset: tried, didn't help
Flash using flashtool: the phone exits flashmode when flashtool starts flashing
HeadbangerBR said:
Factory reset: tried, didn't help
Flash using flashtool: the phone exits flashmode when flashtool starts flashing
Click to expand...
Click to collapse
open flashtool, choose flashmode then a stock rom to flash, connect usb to phone whilst holding vol - ,when flashtool says "device connected in flashmode" pull the usb cable from phone and wait 30seconds or so until it prompts you to connect, so hold vol - button an connect usb, should start now, you can try this at your own risk, has worked for me, infact i have to do this pretty much every time i flash my sxs using flashtool
3stage said:
open flashtool, choose flashmode then a stock rom to flash, connect usb to phone whilst holding vol - ,when flashtool says "device connected in flashmode" pull the usb cable from phone and wait 30seconds or so until it prompts you to connect, so hold vol - button an connect usb, should start now, you can try this at your own risk, has worked for me, infact i have to do this pretty much every time i flash my sxs using flashtool
Click to expand...
Click to collapse
Worked for me too! THANKS MAN!
The phone is 100% working now.
HeadbangerBR said:
Worked for me too! THANKS MAN!
The phone is 100% working now.
Click to expand...
Click to collapse
your welcome fella be sure to hit the thanks button , glad i could have helped, seems an odd thing to have to do but it works, just doesnt seem to fully recognise flashmode on the first connection i think maybe
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
upppp said:
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
Click to expand...
Click to collapse
read this thread..http://forum.xda-developers.com/showthread.php?t=1568792
it has step by step process to solve ur problem
upppp said:
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
Click to expand...
Click to collapse
Flash the stock rom with flashtool, for that look in the rooting guide in my signature. There's how to root your phone on 4.0.2.A.0.62 firmware and there's how to use flashtool and install the firmware.
Is your bootloader locked?
Didn't you make a backup?
mihahn said:
Flash the stock rom with flashtool, for that look in the rooting guide in my signature. There's how to root your phone on 4.0.2.A.0.62 firmware and there's how to use flashtool and install the firmware.
Is your bootloader locked?
Didn't you make a backup?
Click to expand...
Click to collapse
yes my bootloarder is locked , i dont make a backup
read this thread..http://forum.xda-developers.com/show....php?t=1568792
it has step by step process to solve ur problem
im trying but i dont cant enter in flashmode
upppp said:
yes my bootloarder is locked , i dont make a backup
read this thread..http://forum.xda-developers.com/show....php?t=1568792
it has step by step process to solve ur problem
im trying but i dont cant enter in flashmode
Click to expand...
Click to collapse
to enter flash mode proper drivers should be installed in ur pc.....
install sony update service in ur pc...it will automatically install s1 flashboot and fastboot drivers.
sandy7 said:
to enter flash mode proper drivers should be installed in ur pc.....
install sony update service in ur pc...it will automatically install s1 flashboot and fastboot drivers.
Click to expand...
Click to collapse
i install sony update but the phone not enter in flashmode , volume down i just reboot reboot reboot .....
upppp said:
i install sony update but the phone not enter in flashmode , volume down i just reboot reboot reboot .....
Click to expand...
Click to collapse
I'm from Portugal and here we have 15 days in which we can return the phone if it has a problem since we can not in any way give life to this mobile phone I think it best to go the store going to say that he died when he did the upgrade ics system. It is a good idea or should I seek a solution , i have the phone for 1 week
upppp said:
i install sony update but the phone not enter in flashmode , volume down i just reboot reboot reboot .....
Click to expand...
Click to collapse
Turn phone off, remove battery, wait 5s, put battery, hold volume down and plug cable. Keep holding until led comes green.
pikpok said:
Turn phone off, remove battery, wait 5s, put battery, hold volume down and plug cable. Keep holding until led comes green.
Click to expand...
Click to collapse
led only red dont get green one time pc companion recognise sony ericsson xperia mini , e ear the sound of usb i think its close to enter in flashmode
upppp said:
I have a big problem installed the rom real ics beta 3 with the stock kernel and tlm entered the boot loop then thought it was a bug and installed the rom real ics beta 2 but keep the same and now in recovery not say that I can not mount the sd card i need help the phone is new.
Sorry for bad english.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/showthread.php?t=1799786
Did you install the drivers from flashtool now?
Install flashtool, go to the installation folder>drivers and install the .exe (maybe your phone isn't included in the list, just tick everything which is offered and install all them).
Afterwards install sony pc companion and sony update service, drivers should be installed with it.
So turn phone off and while it's off hold volume down and while you hold it down connect the usb to pc. The led should turn green.
If it's red it could be battery isn't charged, so charge it. If charging doesn't work get a battery of a friend...
Well bro, proceed is said by mihahn, the led is red, just bcz you have installed extended stock Kernel, right???
Sent from my ST15i using xda app-developers app
Sent from my ST15i using xda app-developers app
i tried everything but the phone dont enter in flashmode ............ red led vibrate and reboot..... red led vibrate reboot......................................
upppp said:
i tried everything but the phone dont enter in flashmode ............ red led vibrate and reboot..... red led vibrate reboot......................................
Click to expand...
Click to collapse
That it vibrates is strange, normally you just hold volume down and connect. Don't power on or anything just press volume down and plug usb...
But if that's not the problem I haven't found something that may help you, yet
mihahn said:
That it vibrates is strange, normally you just hold volume down and connect. Don't power on or anything just press volume down and plug usb...
But if that's not the problem I haven't found something that may help you, yet
Click to expand...
Click to collapse
OMG im so noob i am doing it with power on omg ty now the phone is live ty
upppp said:
OMG im so noob i am doing it with power on omg ty now the phone is live ty
Click to expand...
Click to collapse
Very great enjoy your phone again
Hit thanks if I helped
Plz hep me..i hard bricked my phone while trying to install cwm recovery on my sony xperia u st25i running ics..i read the article i had found again and realised that recovery was for sony xperia p ics..now my phone is not even starting..it has gone plain dead..when i remove the battery and re insert it,led light for charging flashes orange for a moment and the phone goes dead..please,please help me anyone..i cant afford to have this phone as a paperweight..!!
Can you enter fastboot or flash mode?
Sent from my LT26i using xda app-developers app
krabappel2548 said:
Can you enter fastboot or flash mode?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
No,i cant enter either of them..my phone does not responds to anything..usb cable or charger..vol. up or vol. down or power..wish had never unlocked my bootloader because than i had never developed intrest in all these procedures..i admit,rooting and flashing custom roms,enjoying a vast range f applications for root was fun alltogether but a very costly one..i know i wont be able to get it replaced because i already voided my warranty by unlocking the f***ing bootloader..!!
xperiavish said:
No,i cant enter either of them..my phone does not responds to anything..usb cable or charger..vol. up or vol. down or power..wish had never unlocked my bootloader because than i had never developed intrest in all these procedures..i admit,rooting and flashing custom roms,enjoying a vast range f applications for root was fun alltogether but a very costly one..i know i wont be able to get it replaced because i already voided my warranty by unlocking the f***ing bootloader..!!
Click to expand...
Click to collapse
But your charging light turns orange? That means you should be able to enter fastboot mode. Did you try removing the battery, leave it out of the phone for like a few minutes to be sure.
Then connect USB cable with volume up, without battery in the phone.
Let me know what you get then
Sent from my LT26i using xda app-developers app
Should i be messing with the test pointers to get this undone via hardware..or i should stick to software manipulations using diffrent combos..i hve removed the battery 10 minutes ago,i guess all the capacitor power will be gone by now..so what next should i do..??
xperiavish said:
Should i be messing with the test pointers to get this undone via hardware..or i should stick to software manipulations using diffrent combos..i hve removed the battery 10 minutes ago,i guess all the capacitor power will be gone by now..so what next should i do..??
Click to expand...
Click to collapse
First off calm down and think clearly. I hardbricked my S but revived it. First off the recovery should be related to the kernel. Put your battery in and hold volume up and power for ten seconds. Then let it chill for a few minutes. Then try and enter fastboot so you can flash a new kernel. I have NEVER EVER found a phone that couldnt be revived from brick and I have rooted and modded at least 15 different models and manufacturers. It can be done, you just need patience. Fastboot mode is the way to revive a device and once you get the proper kernel on you should be okay. Just keep trying to enter fastboot. Dont run your battery out all the way though, since sometimes you can get it to low the phone cant charge and the charge mode is related to kernel.
I do have same problem, please help me.
mrsatan said:
First off calm down and think clearly. I hardbricked my S but revived it. First off the recovery should be related to the kernel. Put your battery in and hold volume up and power for ten seconds. Then let it chill for a few minutes. Then try and enter fastboot so you can flash a new kernel. I have NEVER EVER found a phone that couldnt be revived from brick and I have rooted and modded at least 15 different models and manufacturers. It can be done, you just need patience. Fastboot mode is the way to revive a device and once you get the proper kernel on you should be okay. Just keep trying to enter fastboot. Dont run your battery out all the way though, since sometimes you can get it to low the phone cant charge and the charge mode is related to kernel.
Click to expand...
Click to collapse
Hi,
I have installed successfully Dynamic rom on my xperia u, It worked like charm initiailly, but after few hours when I restarted the device its not booting, Just stuck with sony logo, not proceeding further . Fortunately :victory: it enters fastboot mode and even flashmode, kindly help me how can I recover my phone ?
aktherraza said:
Hi,
I have installed successfully Dynamic rom on my xperia u, It worked like charm initiailly, but after few hours when I restarted the device its not booting, Just stuck with sony logo, not proceeding further . Fortunately :victory: it enters fastboot mode and even flashmode, kindly help me how can I recover my phone ?
Click to expand...
Click to collapse
Download and flash a stock firmware using flashtool and be careful about what Rom you flash on your phone always.
Tapatalked !
Rapier07 said:
Download and flash a stock firmware using flashtool and be careful about what Rom you flash on your phone always.
Tapatalked !
Click to expand...
Click to collapse
Hi,
I'll be thankful to you If you can point to a guide to use flash tool to achieve this.
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Hurray
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Thanks all of you for the help, My phone's soul restored ! :victory:
help help
mrsatan said:
First off calm down and think clearly. I hardbricked my S but revived it. First off the recovery should be related to the kernel. Put your battery in and hold volume up and power for ten seconds. Then let it chill for a few minutes. Then try and enter fastboot so you can flash a new kernel. I have NEVER EVER found a phone that couldnt be revived from brick and I have rooted and modded at least 15 different models and manufacturers. It can be done, you just need patience. Fastboot mode is the way to revive a device and once you get the proper kernel on you should be okay. Just keep trying to enter fastboot. Dont run your battery out all the way though, since sometimes you can get it to low the phone cant charge and the charge mode is related to kernel.
Click to expand...
Click to collapse
i need help just hard brick my xperia s .... no led no fastboot no flashboot....no logo.... nothing at all and i was with 80% battery please mailme at this direction [email protected] i trully need help i dont know what to do anymore
Post your own thread instead of necroing an old one will help. Also saying what happened before the phone died will also help.
Anyway, hold vol up + power for 20 seconds and see if you can get it to vibrate.
If so, after the 3rd vibrate, quickly hold vol down, then jam the USB cable in.
You are now in flashboot. Flash a stock ftf and you should be fine.
links plz
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
plz can i get a link for ftf file for my xperia u.....thnx
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Saved my life!
Was stuck into SONY logo after "testing" each CWM function (like the wipe system, etc .. !)
Many thanks!
Xperia U bricked, tried many things but now it gets stuck at "SONY" logo
I am now downloading this http://forum.xda-developers.com/showthread.php?t=1974430 stock ROM. can you suggest which kernel I will have to use to flash the boot partition with. and any steps I have to follow before flashing the stock ROM using flashtool ?
Background:-
I rooted my phone then unlocked the bootloader the official way.
Installed CM9. worked fine
Then I wanted to back to stock ROM (for some xyz reason)
I got a vodafone image and recovered the phone by flashing it but touchscreen was not working.
I think I have messed up a lot and now I cant get the CM9 working also (touchscreen doesnt work)
Touchscreen not working, is it a software or hardware related ?
I still believe if its software related it can be fixed somehow.
Thanks.
Rajul said:
Download official ics ftf from development section of ur xperia
Download flashtool
Install flashtool
Go to c/flashtool/drivers
Install drivers for ur xperia
Now switch of ur phone keep it aside
Go to flashtool
Click thunder icon
Select flashmode
Select ftf
Check no final verification
Check exclude ta
Click flash\start
Now it will ask u to connect ur phone in flashmode
Press the volume down button, keep it pressed and connect to usb
Flashing will start
Let it complete
U r done wait for flashing
By Dr.sanket
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
the ftf file includes the kernel, just flash.
Sent from my Xperia Arc S using xda premium
Thanks. But do you think the touchscreen issue is just due to wrong ROM or could it be hawdware ?
tangosierra_ said:
the ftf file includes the kernel, just flash.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
It should be ROM issue, I remember seeing this problem in the arc forums too
Sent from my Xperia Arc S using xda premium
Cool. I'll try to flash the ROM. Is there a need to clear the cache and system portions ?
Sent from my Nexus 7 using xda app-developers app
Hi everyone...
Yesterday my sxp was working alright when i decided to relock bootloader. So I used relock ftf file and flashed it via flashtool. Now I used SUS to update my phone. But when i pressed Vol down and plugged in usb, i just got a red led and sus didn't detect my phone. I thoght battery is not enough, now the situation is:
***when i connect my phone to wall socket, red led turn on for few seconds,then it turn into green led for 1-2 second and then led goes off.
***if i try to use power + vol up/down....no vibration...only blinking red led for couple of seconds
***phone is not being detected by SUS or flashtool, as connecting via usb holding vol down button only gives red led.
I am stuck here. Any help is appreciated.
Which relock file did u flashed... And after that did u flashed stock firmware also???
drsanket_xperia_u said:
Which relock file did u flashed... And after that did u flashed stock firmware also???
Click to expand...
Click to collapse
Filename is LT22i_relock_bootloader.ftf present in xperia p development forum. No i didn't flash stock firmware. I wanted to update via SUS but was not able to do so as i mentioned.
maanleo said:
Filename is LT22i_relock_bootloader.ftf present in xperia p development forum. No i didn't flash stock firmware. I wanted to update via SUS but was not able to do so as i mentioned.
Click to expand...
Click to collapse
Flash using flashtool!
Sent from my LT22i using xda app-developers app
waqar bukhari said:
Flash using flashtool!
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
But how to connect the phone in flashmode, i think battery is causing problem.
maanleo said:
But how to connect the phone in flashmode, i think battery is causing problem.
Click to expand...
Click to collapse
Well there is some progress...
when i connect the phone via usb to pc red led turn on no matter i push vol down button or not and phone does not get recognized in flashtool or SUS....
but after few minutes green led turns on and phone gets recognized by flashtool and SUS as in flashmode....
but while SUS is downloading led turns off phone gets disconnected and SUS gives error.
maanleo said:
Well there is some progress...
when i connect the phone via usb to pc red led turn on no matter i push vol down button or not and phone does not get recognized in flashtool or SUS....
but after few minutes green led turns on and phone gets recognized by flashtool and SUS as in flashmode....
but while SUS is downloading led turns off phone gets disconnected and SUS gives error.
Click to expand...
Click to collapse
Bro when u relock bootloader u always need to flash the stock fw after wards
U cant use sus now
U need to use flashtool to flash stock fw
drsanket_xperia_u said:
Bro when u relock bootloader u always need to flash the stock fw after wards
U cant use sus now
U need to use flashtool to flash stock fw
Click to expand...
Click to collapse
Thanks for info....but how much time it takes to flash a rom via flashtool, as phone only manages couple of minutes in flashmode... don't know whats going on...
maanleo said:
Thanks for info....but how much time it takes to flash a rom via flashtool, as phone only manages couple of minutes in flashmode... don't know whats going on...
Click to expand...
Click to collapse
Thanks All....phone is working now....i didn't know after relocking i have to use flashtool, on the other hand battery was also 0% which confused me more..
maanleo said:
Thanks All....phone is working now....i didn't know after relocking i have to use flashtool, on the other hand battery was also 0% which confused me more..
Click to expand...
Click to collapse
Good to see ur phone is alive now
maanleo said:
Thanks All....phone is working now....i didn't know after relocking i have to use flashtool, on the other hand battery was also 0% which confused me more..
Click to expand...
Click to collapse
Its even better if you flash stock before you flash relock tft. Stock kernel works with locked and unlocked bootloader. But if you are using custom or cm kernel, then it will cause exactly what happened to you...
Sent from my MT27i using xda app-developers app
maanleo said:
Thanks All....phone is working now....i didn't know after relocking i have to use flashtool, on the other hand battery was also 0% which confused me more..
Click to expand...
Click to collapse
I have the same problem like you, please tell me how do you repair it ?
alex_talpa said:
I have the same problem like you, please tell me how do you repair it ?
Click to expand...
Click to collapse
Flash stock tft with flashtool.
Ohai!
maanleo said:
Hi everyone...
Yesterday my sxp was working alright when i decided to relock bootloader. So I used relock ftf file and flashed it via flashtool. Now I used SUS to update my phone. But when i pressed Vol down and plugged in usb, i just got a red led and sus didn't detect my phone. I thoght battery is not enough, now the situation is:
***when i connect my phone to wall socket, red led turn on for few seconds,then it turn into green led for 1-2 second and then led goes off.
***if i try to use power + vol up/down....no vibration...only blinking red led for couple of seconds
***phone is not being detected by SUS or flashtool, as connecting via usb holding vol down button only gives red led.
I am stuck here. Any help is appreciated.
Click to expand...
Click to collapse
Ohai there... Had this problem myself, and i found out that you have to flash stock firmware after relocking... This also happend to my XGo, and flashing stock firmware fixed the problem! Hope you have a working Xperia P afterwards!
Also charge your phone over night before flashing!
If u cant turn ur phone after hours of charging. ..Take out battery...charge with auto charger...put it on..it will vibrate than flash it...
Sent from my ST25i using xda app-developers app
I rooted my xperia p and tried to change the call log with honami phonebook,I added some commands in build.prop,copied another services.jar to system,after 15 mins,my phone powered off and didnt want to power on,just "SoNY" logo and then black screen,no flashboot or fastboot mode,PLEASE help me :'( is it bricked or what?
this is the thread that I followed : http://forum.xda-developers.com/xperia-u/themes-apps/mod-honami-phonebook-v2-light-black-14-t2389777
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
pjohn23 said:
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
Click to expand...
Click to collapse
phone is not detected on pc and can't start phone in fast or flashboot,the LED turns green for 1 or 2 sec than turns red then the phone start (sony logo then black screen)
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
yes do as said on above post. it couldnt be a hard brick. AFAIK hard bricks only occur if you flash something not meant for your device. except in Z series.
matood said:
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Z.Blackbeard said:
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Click to expand...
Click to collapse
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
ChikeD said:
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
Click to expand...
Click to collapse
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Z.Blackbeard said:
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Click to expand...
Click to collapse
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
ChikeD said:
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
Click to expand...
Click to collapse
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Z.Blackbeard said:
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Click to expand...
Click to collapse
you flashed stock firmware?
pjohn23 said:
you flashed stock firmware?
Click to expand...
Click to collapse
I don't understand?! I can't go in flashboot mode,how can I flash with stock firmware ? and does stock firmware means the factory one?
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
pjohn23 said:
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
Click to expand...
Click to collapse
If it doesn't show connected in flash mode in flashtool he cannot flash
Oh, how will he recover his device then? Just trying to help
pjohn23 said:
Oh, how will he recover his device then? Just trying to help
Click to expand...
Click to collapse
Yes it's a problem, but I've seen a few that have managed to fix it by disconnecting the battery.
xperia p has removable battery?
pjohn23 said:
xperia p has removable battery?
Click to expand...
Click to collapse
Nope, u need to open it and disconnect it
You dont need disconnect anything. Your phone is not bricked, its working. The only problem is your drivers, you have to manage install them and it will work. This has been here thousand times.
Sent from my MT27i using xda app-developers app
FIXED IT !! I don't know what happened during the night,but this morning I tried to boot my phone and it did respond !! then I flashed firmware and it worked like charm I was going to try the jig usb as a last hope,but It worked and you were right @matood thank you all for your support