Hello everyone, I'm from Poland and I've got for two days Honor 5x with KIW-L21. I want to hide navigation bar with tutorial on this forum, so I made this steps:
1. I unlocked the bootoloader- working
2. I made the root with some spanish tutorial- working
3. The phone is working, I've checked if the root is installed properly- is ok.
4. I DON'T KNOW WHY I want to made one more facotry reset from menu.
5. After I make it the phone starts only on recovery mode.
6. I DON'T KNOW WHY I wipe all of data also with system...
So there is no os or anything on phone right now. I've downloaded the official update.app from this forum to KIW-L21, putted it to folder dload on sdcard, and when I try to install It with combination power+ volume+ + volume- system says only "Installation failed".
Also I've kicked out twrp and stock recovery is booting, and when I try to wipe data, It's also saying that is problem to wipe the data.
Please help me with some issues to made this great phone alive..
Alright, I finally unbrick the phone- I downloaded extracted rom and manually flashed it with fastboot. I've found tutorial on polish site how to do it, but there is also english version of manual if you have the same problem.
It wil be great if u could post links
@Target1920. Też mam ten problem, spójrz. Zapewne masz telefon z plusa https://youtu.be/4LbChNXHgsY (I'm the same problem)
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
Can't you just replace the stock recovery with twrp via fastboot?
Of course
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
my phone is bricked also .. can you write out what you did ???:fingers-crossed:
averyg said:
my phone is bricked also .. can you write out what you did ???:fingers-crossed:
Click to expand...
Click to collapse
Hello @averyg here you go:
http://forum.android.com.pl/topic/205126-instalacjaodzyskiwanie-systemu-rom-za-pomoca-fastboot/
This is the polish version of manual, I will write you how to do it:
1. Download ADB and Fastboot
2. Extract to c:/adb
3. Download from this thread firmware for you (extracted version!) http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 If you have problem what firmware you have to install, take look at the back side of phone, at the down you will se KIW-L21 or 24 (or another). Copy all files to adb folder
4. Rund adb program
5. Write in the command line: cd c:/adb
6. Connect phone to usb to download mode (power and vol- combination)
7. Write in fastboot command: fastboot flash recovery recover.img (or recovrey .img, see the file and type it name) - wait for install
8. And now: If the flash is succesfull, reboot the phone to recovery (power and volume+) and wipe all data. Phone have to work.
But if flash is not succesfull, plug again usb with download mode
9. Write this commands: fastboot flash cust cust.img -wait for install
and: fastboot flash system system.img -also wait, system.img can took a while
10. Now you will enter recovery and wipe all data
11. Again plug usb cable and install firmware with those commands:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
Now phone must run. And wipe all data after that, cause I didn't wipe and have only 800mb of free storage. After wipe everything is ok (9,6 gb). I remember when I'm flashing cust.img some errors appears, but my phone work. So don't worry when you see some. And you know, you can make it with on your own responsibility. I don't take any responsibility if something went wrong and phone will dead. But I make everything with this points and my phone work
If someone can't read this text cause my english is terrible, SORRY
honor 5x l22 bricked
can you give me solution for honor 5x kiw-L22 indian version any solution you have
ronnie arora said:
can you give me solution for honor 5x kiw-L22 indian version any solution you have
Click to expand...
Click to collapse
Hello, I think solution will be the same, but you must find stock rom for your phone.
Target1920 said:
Hello, I think solution will be the same, but you must find stock rom for your phone.
Click to expand...
Click to collapse
their is no stock rom available for l22 indian version i found the solution in xda some1 have backup stock with twrp ill try it then post soon if it work for me:angel:
averyg said:
my phone is bricked also .. can you write out what you did ???:fingers-crossed:
Click to expand...
Click to collapse
which model do you have ? kiw- ?
Target1920 said:
Hello @averyg here you go:
http://forum.android.com.pl/topic/205126-instalacjaodzyskiwanie-systemu-rom-za-pomoca-fastboot/
This is the polish version of manual, I will write you how to do it:
1. Download ADB and Fastboot
2. Extract to c:/adb
3. Download from this thread firmware for you (extracted version!) http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 If you have problem what firmware you have to install, take look at the back side of phone, at the down you will se KIW-L21 or 24 (or another). Copy all files to adb folder
4. Rund adb program
5. Write in the command line: cd c:/adb
6. Connect phone to usb to download mode (power and vol- combination)
7. Write in fastboot command: fastboot flash recovery recover.img (or recovrey .img, see the file and type it name) - wait for install
8. And now: If the flash is succesfull, reboot the phone to recovery (power and volume+) and wipe all data. Phone have to work.
But if flash is not succesfull, plug again usb with download mode
9. Write this commands: fastboot flash cust cust.img -wait for install
and: fastboot flash system system.img -also wait, system.img can took a while
10. Now you will enter recovery and wipe all data
11. Again plug usb cable and install firmware with those commands:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
Now phone must run. And wipe all data after that, cause I didn't wipe and have only 800mb of free storage. After wipe everything is ok (9,6 gb). I remember when I'm flashing cust.img some errors appears, but my phone work. So don't worry when you see some. And you know, you can make it with on your own responsibility. I don't take any responsibility if something went wrong and phone will dead. But I make everything with this points and my phone work
If someone can't read this text cause my english is terrible, SORRY
Click to expand...
Click to collapse
Thanks for your hard work.
I have problem with flashing cust and cache (Remote: Command not allowed) . My phone work, but I still see Custom version and Build number from old ROM (MoDaCo).
Does anyone have a solution, pls?
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
ronnie arora said:
which model do you have ? kiw- ?
Click to expand...
Click to collapse
l-24
averyg said:
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
l-24
Click to expand...
Click to collapse
To enter Fastboot of Honor 5x (KIW-L21)
Holding Volume down connect your device to PC using usb cable
ronnie arora said:
can you give me solution for honor 5x kiw-L22 indian version any solution you have
Click to expand...
Click to collapse
Download the latest firmware for your phone and extract it to get update.app.
Use Huawei update extractor to extract boot, recovery, Cust and system images.
Flash using the guide above.
Put dload folder containing update.app in SD card. Plug it into your phone and do a 3 button forced update and ypu are good to go.
averyg said:
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
l-24
Click to expand...
Click to collapse
Try installing drivers for the 5x.
averyg said:
hi
i cant get into download mode and now fastboot says waiting for device
---------- Post added at 01:31 PM ---------- Previous post was at 12:32 PM ----------
l-24
Click to expand...
Click to collapse
On which command does it says waiting for device?
Sent from my PLK-L01 using Tapatalk
Ok I'm stuck. I was stupid and didnt make backup before flashing CM13 over stock 5.1.1. I've tried everything and now I've lost twrp (stock recovery is on) and I can't enter fastboot. I've also tried method with dload folder and 2 different update files but it keeps giving error.
Any help?
Related
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Extract the Zip in a folder .
Boot the phone into fastboot.
Run the batch file.
Done.
This method WILL NOT WIPE DATA
If you want to wipe data to,flash userdata.img from here :- https://www.androidfilehost.com/?fid=24052804347833307
Use command
fastboot flash userdata userdata_64.img
Click to expand...
Click to collapse
You need the latest adb/fastboot package to be successful.For that,do this :-
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only)
Extract the zip and place the android-sdk-windows folder on your desktop.
Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):-
Tools > Android SDK Tools, Android SDK Platform-tools- Extras > Android Support Library, Google USB Driver
Click to expand...
Click to collapse
Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
Thanks for reading ...
Credits :- @jcespi2005 For making the fastboot zip ... @Naman Bhalla for making the thread and partitions images thread.
Done to @jcespi2005 here :- http://forum.xda-developers.com/donatetome.php?u=281521
Donate to me here :- http://www.amazon.in/gp/registry/wishlist/1X55WMSVTW3KW/
Thanks again. !!
This method has been tested successfully by atleast 2 people ,including me
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
matitorres07 said:
This img is oxygen os 2.1.1?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Correct
DEAD
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
i've got the exact same problem. Let me guess: your bootloader is locked?
anyways, try this: press POWER + VOLUME UP until you're in fastboot mode. connect the OP2 to your PC and execute the command 'fastboot continue' in a cmd window. if not, repeat until it works. your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
at least that's my problem. can't flash anything since bootloader is locked, ADB does work fine though, as long as the phone is running.
really sucks to need a PC everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
S0ad113 said:
OMG MY OPT IS DEAD... dont start just vibrate and flashing dont star...i cant went in to the recovery mode...just on fastboot HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
Click to expand...
Click to collapse
I TRY TO USE TOOLBOX and try to flash..some via CMD But give me error writing "recover" ...Failed Remote: device is Locked. Cannot Flash images)
Helppppppp me
---------- Post added at 11:13 PM ---------- Previous post was at 11:08 PM ----------
rattig said:
i've got the exact same problem. Let me guess: Your bootloader is locked?
Anyways, try this: Press power + volume up until you're in fastboot mode. Connect the op2 to your pc and execute the command 'fastboot continue' in a cmd window. If not, repeat until it works. Your phone should boot like normal, you can't restart or shutdown though, since you'll be stuck in the same loop again.
At least that's my problem. Can't flash anything since bootloader is locked, adb does work fine though, as long as the phone is running.
Really sucks to need a pc everytime you want to power on your phone.. if anyone can help, i'd gladly appreciate it
Click to expand...
Click to collapse
i try all always locked always loop omg
---------- Post added at 11:38 PM ---------- Previous post was at 11:13 PM ----------
Helpppppppppppppppppppppppppppppppppppppppppppppppppppppppp
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
ukcain said:
Please note that on the fastboot userdata command you are missing a letter. You have "fastboot flash userdata userdata_64.img" and it should be fastboot flash userdata userdata_64G.img. Great job by the way, used it to reset the OP2 and works great.
Click to expand...
Click to collapse
I did it..but is not that the problem....the problem is..when i try to flash some...fail always. give the error : device is Locked. Cannot Flash images
REBORN
Solved ty allll
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Stevles said:
How on earth did you manage to get a fastboot image for the OP2?
Thanks by the way
Click to expand...
Click to collapse
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
jcespi2005 said:
Converting the .DAT inside the official recovery ZIP to .IMG format
The rest of partitions are on the fastboot format, so only system and cache needs conversion, and userdata comes from hydrogenOS fastboot package...
Click to expand...
Click to collapse
Nice
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Zahi122 said:
is not flash me the file system.img
i get error message "the app crash" from windows
pls help
Click to expand...
Click to collapse
I'm having the same issue
I'll try to do it through TWRP and see if that works for me
Naman Bhalla said:
Hello People !!!
Want to return your OP2 to 100% Stock Factory Image or have you soft bricked OP2 and nothing except fastboot works or you need OxygenOS fastboot images ? This is the thread for you !!
Download Fastboot Image from here :- https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Click to expand...
Click to collapse
Hi,
Are these images from a Chinese, EU or US version of the device?
thanks
Hello all,
is there a new img.image?
I have great problems and need a super clean install included wipe data!!
Thanxx for helping
S5 & One + Boeffla Inside
S0ad113 said:
Solved ty allll
Click to expand...
Click to collapse
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
avi0889 said:
How? What did you do different? For me, the fastboot.exe stops working at the below step.
..\fastboot>fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
I got the same error at first then I copied all the files into my platform-tools dir that has ADB & fastboot then run it.
Try this tool. It works good for me. But the windows driver for OP2 and the Qualcomm Diagnostic 9006 Driver must be installed.
Sry, can`t post the link. please PN.
Worked great, but it switched my wifi off. Even if I turn it on manually it doesn't show any active networks. I have rebooted several times. Any workaround?
Hi,
I have bricked my Honor 5x after flashing custom recovery. This these the steps I followed:
1) Unlocked the bootloader
2) Flashed TWRP recovery
3) Flashed root
4) Tried to update OTA
Now the phone is stuck at boot screen. I can enter recovery by pressing volume down and power, but now is stock recovery. And I don't know what to do.
Can someone help me?
OK u can't OTA update with twrp AND U SHOULD try adb flashing twrp through fastboot and maybe restoring a nandroid if u have one if not there's some u can download around here
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Ok, I figured it out. I took the backup and the instructions from this thread: http://forum.xda-developers.com/honor-5x/development/unrooted-stock-rom-t3308902
heinzwilli6 said:
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Click to expand...
Click to collapse
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
I tried to do that too. But the problem was that my adb didn't recognize my phone. Of course I had everything installed.
When I unlocked the bootloader earlier, it worked. But there I had to enable USB debugging. When my phone was broke, I couldn't enable it. Maybe that's why?
However, my phone is working right now, so thanks anyway.
fixed
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
nandakalyan said:
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
Click to expand...
Click to collapse
WORKED: update.app in dload folder WORKED !!! Thanks a lot
narengowda said:
WORKED: update.app in dload folder WORKED !!! Thanks a lot
Click to expand...
Click to collapse
Glad it worked! did you figure out what caused the issue?
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
sad1996 said:
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
Click to expand...
Click to collapse
Yes, it is working perfectly.
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
tomblast66 said:
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
Click to expand...
Click to collapse
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
nandakalyan said:
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
Click to expand...
Click to collapse
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
tomblast66 said:
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
Click to expand...
Click to collapse
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
nandakalyan said:
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
Click to expand...
Click to collapse
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
tomblast66 said:
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
Click to expand...
Click to collapse
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
nandakalyan said:
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
Click to expand...
Click to collapse
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
tomblast66 said:
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
Click to expand...
Click to collapse
Oops! I am no techie, so am at the end of my wits, but thing I do suspect is a corrupted download, so if you can try downloading the file again from a stable connection and try is all I can think of. I've had this corrupted file thing quite a few times, so suggesting.
Please read carefully it is different from other cases..
I just got my new phone and it is Honor 5x, I set it up normally as you do on any new phone before using it. I had not done anything else at this point but follow the directions given and the phone was behaving fine. There was a software update and I started it, but then when it went to reboot, it stayed frozen at the Honor logo screen. I have tried various things and looked everywhere. I tried going to the Emui menu and I tried the "factory reset" option and it got up to 15% before saying that it failed, forcing me to shut it down. No matter how many times I try to reboot the phone, it stays at that same logo screen. If I press the volume keys and the power button, it takes me to the download screen but does not pass 0 . I have tried to manually install the update by the use of an SD card. When I tried it after I mounted it on the card, it got to maybe 10% before saying the software update failed and forced me to shut the phone down again. When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone. I tried redownloading the update and doing it again incase it somehow downloaded wrong on my laptop but it still has done no change. The farthest I got was when I put the update on the SD card before it failed. I need a solution please help me it's been days and i havent found something yet
Lasisi said:
Please read carefully it is different from other cases..
I just got my new phone and it is Honor 5x, I set it up normally as you do on any new phone before using it. I had not done anything else at this point but follow the directions given and the phone was behaving fine. There was a software update and I started it, but then when it went to reboot, it stayed frozen at the Honor logo screen. I have tried various things and looked everywhere. I tried going to the Emui menu and I tried the "factory reset" option and it got up to 15% before saying that it failed, forcing me to shut it down. No matter how many times I try to reboot the phone, it stays at that same logo screen. If I press the volume keys and the power button, it takes me to the download screen but does not pass 0 . I have tried to manually install the update by the use of an SD card. When I tried it after I mounted it on the card, it got to maybe 10% before saying the software update failed and forced me to shut the phone down again. When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone. I tried redownloading the update and doing it again incase it somehow downloaded wrong on my laptop but it still has done no change. The farthest I got was when I put the update on the SD card before it failed. I need a solution please help me it's been days and i havent found something yet
Click to expand...
Click to collapse
Well I have no idea how much experience you have with Honor phones but you do realize that their are no less than 6 varent of this phone
Are you sure your downloading the correct files for your model?
Are you using the dload/update.app method to update?
Did you unlock the bootloader?
Flash TWRP?
Sent from my LEX727 using Tapatalk
try booting into huawei erecovery and pressing "flash latest firmware and recovery"
clsA said:
Well I have no idea how much experience you have with Honor phones but you do realize that their are no less than 6 varent of this phone
Are you sure your downloading the correct files for your model?
Are you using the dload/update.app method to update?
Did you unlock the bootloader?
Flash TWRP?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
This is actually my first time with huawei devices but i made sure i downloaded the right firmware no result!!
Also unlocking the boot loader asks for stuffs such as build no device id etc but i dont know how to do this because the phone isnt booting up
About flashing twrp I have no idea what this is about but i think it also has something to do with unlocking bootloader which i am unable to do without getting the phone to boot to homepage
Thanks for d reply how else can you help me pls!!
Abhaypraseeth said:
try booting into huawei erecovery and pressing "flash latest firmware and recovery"
Click to expand...
Click to collapse
I understand booting into erecovery but i dont understand pressing flash latest firmware and recovery please expanciate. Thanks
Lasisi said:
I understand booting into erecovery but i dont understand pressing flash latest firmware and recovery please expanciate. Thanks
Click to expand...
Click to collapse
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Abhaypraseeth said:
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Click to expand...
Click to collapse
he said he already tried that
When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone.
Click to expand...
Click to collapse
@Lasisi list your phone model and the file your trying to use (a link)
Also list what software version you were on and what the update is listed as
are you putting the file update.app in a folder called dload on the ext_sdcard and rebooting to erecovery by shutting off the phone and then holding volume up and down and power all at the same time ?
Abhaypraseeth said:
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Click to expand...
Click to collapse
Yea... I have done this too and I was able to connect to wifi but when it is about to start downloading it will say failed to get package info instead of downloading it.
Someone said probably the os has crashed and non of this will work...
clsA said:
he said he already tried that
@Lasisi list your phone model and the file your trying to use (a link)
Also list what software version you were on and what the update is listed as
are you putting the file update.app in a folder called dload on the ext_sdcard and rebooting to erecovery by shutting off the phone and then holding volume up and down and power all at the same time ?
Click to expand...
Click to collapse
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
I was told the os of the phone is crashed and all these wont work.. Is there still something else that can be done
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
Dear Lasisi WHICH model of honor 5x do you have (eg KIW-TL00,KIW-TL00H)
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
Please tell and I'll fetch the files for you if I can..
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
This site links to the KIW-L21 is that your phone ?
the file you download from their is a zip file ..are you unzipping it before putting update.app in the dload folder ?
Lasisi said:
I was told the os of the phone is crashed and all these wont work.. Is there still something else that can be done
Click to expand...
Click to collapse
is your phone C185 B130, Kuwait, Channel-Others
or C185 B310 CUST C185 D006
Abhaypraseeth said:
Dear Lasisi WHICH model of honor 5x do you have (eg KIW-TL00,KIW-TL00H)
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Please tell and I'll fetch the files for you if I can..
Click to expand...
Click to collapse
Okay... It is KIW-L21 model
clsA said:
This site links to the KIW-L21 is that your phone ?
the file you download from their is a zip file ..are you unzipping it before putting update.app in the dload folder ?
is your phone C185 B130, Kuwait, Channel-Others
or C185 B310 CUST C185 D006
Click to expand...
Click to collapse
Yes my phone is KIW-L21... I unzipped it before putting in dload... The phone was bought from china thats all i know i *dont know anything* about this C185 B1330
Lasisi said:
Okay... It is KIW-L21 model
Click to expand...
Click to collapse
Ok I'll get you the link just wait for 30 minutes
Lasisi said:
Okay... It is KIW-L21 model
Click to expand...
Click to collapse
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Code:
cd C:\adb
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Code:
fastboot flash boot BOOT.IMG
Next, flash the RECOVERY.IMG by typing:
Code:
fastboot flash recovery RECOVERY.IMG
After that, flash the SYSTEM.IMG with the
Code:
fastboot flash system SYSTEM.IMG
command. *
Lastly, flash the CUST.IMG by typing
Code:
fastboot flash cust CUST.IMG
If all the flashing is done, restart your phone with the
Code:
fastboot restart command
* – Since the SYSTEM and CUST file are much more larger than the other two, the program will flash them in parts. It may seem like the program is frozen, but it’s chopping up the large files into smaller ones in order to flash them. You can check the Process Manager, and see the HDD usage of this process.
Abhaypraseeth said:
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Code:
cd C:\adb
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Code:
fastboot flash boot BOOT.IMG
Next, flash the RECOVERY.IMG by typing:
Code:
fastboot flash recovery RECOVERY.IMG
After that, flash the SYSTEM.IMG with the
Code:
fastboot flash system SYSTEM.IMG
command. *
Lastly, flash the CUST.IMG by typing
Code:
fastboot flash cust CUST.IMG
If all the flashing is done, restart your phone with the
Code:
fastboot restart command
* – Since the SYSTEM and CUST file are much more larger than the other two, the program will flash them in parts. It may seem like the program is frozen, but it’s chopping up the large files into smaller ones in order to flash them. You can check the Process Manager, and see the HDD usage of this process.
Click to expand...
Click to collapse
I know your just trying to help, but those files are Very Old .. most likely his phone is already on android 6
you also don't know if he has C185 or C432
I think a "fastboot getvar all" from the bootloader should tell if he's on C185 or C432
then you need to download one of the 2 files above and use Huawei update extractor to pull the files from the Full update package for Android 6
and use those to try and recover the phone.
clsA said:
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Next, flash the RECOVERY.IMG by typing:
After that, flash the SYSTEM.IMG with the
command. *
Lastly, flash the CUST.IMG by typing
If all the flashing is done, restart your phone with the
I know your just trying to help, but those files are Very Old .. most likely his phone is already on android 6
you also don't know if he has C185 or C432
I think a "fastboot getvar all" from the bootloader should tell if he's on C185 or C432
then you need to download one of the 2 files above and use Huawei update extractor to pull the files from the Full update package for Android 6
and use those to try and recover the phone.
Click to expand...
Click to collapse
True
Some real help going on guys.. great to see the detailed instructions for new user.
@Abhaypraseeth and @clsA
shashank1320 said:
Some real help going on guys.. great to see the detailed instructions for new user.
@Abhaypraseeth and @clsA
Click to expand...
Click to collapse
Thanks
[you can use this tool to solve brick problems https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279]
Hi everyone, I'm "new" on the forum. "New" because they are days looking for answers to repair my Honor 9...
After unlocking it, installed twrp and RRos 6.0 I made a mistake, I uninstalled the gapps from the system manually, and after restarting the phone, various error messages continued on terminated processes (com.google... stopped working).
I tried again to reinstall the gapps via twrp but nothing to do, after trying to reinstall the RRos (with full wipe), new error messages kept going out, but this time not only the gapps.. (trebuchet etc ...).
Trying several wipes and reinstallations of the RRos, I tried to go back to the EMUI 8.0, so I tried to install the European firmware via SD and folder DLOAD, but once I got to 5% the installation crashes.
Via fastboot I also tried to install the twrp again, but the recovery stock continues to appear.
Looking on xda and generally on the internet I have found various people with this problem and they have tried to solve with programs like DC-Unlocker or Phoenix, but they had locked bootloader or frp .. I from fastboot I have PHONE Unlocked and FRP Unlock.
I also tried to flash the img contained in the UPDATE.APP file, but nothing happens ... just recovery stock. Help please i am desperate :crying: and sorry for my english.
EDIT - 27/03/2018
-I solved many of the problems I had in this post, now I'm still in the twrp and I can not flash the stock firmware.
-I'm trying to format the microsd in exfat and then install update.app.
-I can not copy the 4.66GB update.app file to the MicroSD in exfat, fat or ext4 via twrp / PC. I will try with another SD reader.
-I formatted the sd in exfat and I managed to copy the dload folder, run the restore and no longer blocked at 5% (gave a 99% error). The system started and I went back to the b130 with nougat, now I try again to install the b120 to restore the captive keys. (trying again with hwota)
-Hwota worked, now with the b120 everything works correctly, now I'm looking for a way to restore OTA Updates.(I will try to install the b183)
-With the b183 ota works, but not the keys / flash. I will try to downgrade to b120, than reupdate to b183 without wipe anything .
-b120 keys working, update to b183 and not working again, I try update ota oreo and search for a kernel.
-Almost everything resolved! After switching from the b183 to the b360, I reunlocked the Honor and installed the kernel with the fix to the capacitive keys. Relock the phone but the Google Logo appears at boot, even after installing the stock kernel.
Kodex_99 said:
Trying several wipes and reinstallations of the RRos, I tried to go back to the EMUI 8.0, so I tried to install the European firmware via SD and folder DLOAD, but once I got to 5% the installation crashes.
Via fastboot I also tried to install the twrp again, but the recovery stock continues to appear.
Click to expand...
Click to collapse
If you were on oreo, it's normal the nougat service repair files don't work with dload.
You're still on RRos ?
oslo83 said:
If you were on oreo, it's normal the nougat service repair files don't work with dload.
Click to expand...
Click to collapse
Can I try with non-European firmware such as Russian or Chinese upgraded to Oreo?
oslo83 said:
You're still on RRos ?
Click to expand...
Click to collapse
No, I did several wipe and tried to restore other system.img
Kodex_99 said:
Can I try with non-European firmware such as Russian or Chinese upgraded to Oreo?
No, I did several wipe and tried to restore other system.img
Click to expand...
Click to collapse
To my knowledge, they are no oreo service repair firmware publicly available yet. So, for now, no flashing firmware with dload once on oreo.
You could use HWOTA8to8 or HWOTA8to7 or the translated russian TOOL from last febuary.
oslo83 said:
You could use HWOTA8to8 or HWOTA8to7 or the translated russian TOOL from last febuary.
Click to expand...
Click to collapse
I only find missing files
Honor 9 multitool eng (feb2018)
https://forum.xda-developers.com/hon...5#post75662105
oslo83 said:
Honor 9 multitool eng (feb2018)
https://forum.xda-developers.com/hon...5#post75662105
Click to expand...
Click to collapse
========================================================================================
Copying the firmware files to the SD card
Please wait ....
========================================================================================
adb: error: failed to get feature set: no devices/emulators found
unfortunately when I try to install the EMUI 8 (the one I had previously installed) from fastboot I get this error message..
Kodex_99 said:
Copying the firmware files to the SD card
Please wait ....
========================================================================================
adb: error: failed to get feature set: no devices/emulators found
unfortunately when I try to install the EMUI 8 (the one I had previously installed) from fastboot I get this error message..
Click to expand...
Click to collapse
You need to be in twrp or system to copy file from your pc to sdcard with adb.
oslo83 said:
You need to be in twrp or system to copy file from your pc to sdcard with adb.
Click to expand...
Click to collapse
The problem is just that... also flash system or twrp, I always get eRecovery, I can try to copy the files on sd from another system however (as I did previously with the dload) but erecovery stucks at 5%
Kodex_99 said:
The problem is just that... also flash system or twrp, I always get eRecovery, I can try to copy the files on sd from another system however (as I did previously with the dload) but erecovery stucks at 5%
Click to expand...
Click to collapse
Once in fastboot boot, what command did you typed to flash stock recovery ?
---------- Post added at 20:20 ---------- Previous post was at 20:20 ----------
Or twrp
oslo83 said:
Once in fastboot boot, what command did you typed to flash stock recovery ?
---------- Post added at 20:20 ---------- Previous post was at 20:20 ----------
Or twrp
Click to expand...
Click to collapse
As I had an official oreo, I used it "fastboot flash recovery_ramdisk twrp.img"
I have just discovered that I can not even wipe from the recovery stock :/
Good, maybe you're doing the key combination wrong:
https://4pda.ru/forum/index.ph...72246&st=800#entry55689846
---------- Post added at 20:27 ---------- Previous post was at 20:26 ----------
So you manage to boot to stock recovery or was it erecovery again ?
oslo83 said:
Good, maybe you're doing the key combination wrong:
https://4pda.ru/forum/index.ph...72246&st=800#entry55689846
Click to expand...
Click to collapse
404
oslo83 said:
So you manage to boot to stock recovery or was it erecovery again ?
Click to expand...
Click to collapse
I have Stock recovery with + button, eRecovery with normal system boot and Fastboot with - button
So, boot to fastboot and flash oreo twrp.
Then boot to twrp recovery like you would have done for booting to stock recovery.
---------- Post added at 20:37 ---------- Previous post was at 20:31 ----------
https://4pda.ru/forum/index.php?showtopic=772246&st=800#entry55689846
oslo83 said:
So, boot to fastboot and flash oreo twrp.
Click to expand...
Click to collapse
I flash it, but when I try to start it I always go back to the recovery stock...
Previously I had installed the twrp but I do not know why the stock returned after several wipes
Do again:
fastboot devices
Then
fastboot flash recovery_ramdisk twrp.img
Then
fastboot reboot recovery
Paste us your output.
What twrp do you used ? 0.2 or 0.3 ?
oslo83 said:
Do again:
fastboot devices
Then
fastboot flash recovery_ramdisk twrp.img
Then
fastboot reboot recovery
Paste us your output.
Click to expand...
Click to collapse
" PS C:\Users\Kodex\Downloads> fastboot devices
7BK0217B04002898 fastboot
PS C:\Users\Kodex\Downloads> fastboot flash recovery_ramdisk twrp.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (27144 KB)...
OKAY [ 0.689s]
writing 'recovery_ramdisk'...
OKAY [ 0.289s]
finished. total time: 0.979s "
unrecognized reboot command.
oslo83 said:
What twrp do you used ? 0.2 or 0.3 ?
Click to expand...
Click to collapse
Up to a few hours ago the 0.2, now the 0.3 but does not change anything...
Keep trying to boot to twrp recovery
---------- Post added at 21:03 ---------- Previous post was at 21:02 ----------
Usb must be unpgugged
oslo83 said:
Keep trying to boot to twrp recovery
Click to expand...
Click to collapse
nothing.. only stock recovery
oslo83 said:
Usb must be unpgugged
Click to expand...
Click to collapse
i tried this
PS C:\Users\Kodex\Downloads> fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.690s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.696s
Hello!
I have ATU-l31 with FRP unlock and bootloader opened. Unfortunately, after i have installed LOS port for this phone, i cannot return to stock firmware, because when i flash stock rom phone goes to bootloop in huawei logo. Also, sometimes it says that userdata partition is corrupted. Surprisingly, LOS can be therefore installed successfully. The issue is critical because of battery drain bug in LOS.
The procedure i`m following is:
using fastboot:
Code:
1. fastboot flash ramdisk ramdisk.img.
2. fastboot flash kernel kernel.img.
3. fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img -u(due to i cannot erase partition for some reason)
4. fastboot flash system system.img
after process complete - immediately run stock recovery and make wipe data\factory reset.
i tried this several times, also using 5. fastboot flash cust cust.img All *.img files were extracted from UPDATE.APP files from fullota for my device.
What am i doing wrong?
Just go to reccovery and download the full firmware there, after downloading and installing the firmware do a factory reset and wipe cache partion
sh0w 0f said:
Just go to reccovery and download the full firmware there, after downloading and installing the firmware do a factory reset and wipe cache partion
Click to expand...
Click to collapse
i can`t download it, it shows me an error "getting info package failed"
[email protected] said:
i can`t download it, it shows me an error "getting info package failed"
Click to expand...
Click to collapse
Do you have your bootloader unlocked?
---------- Post added at 04:33 PM ---------- Previous post was at 04:01 PM ----------
If you have your bootloader unlocked you can download the huawei firmware finder just search it and you can use the huawei update extractor (that can be found in xda) then extract the system img then you can flash it through fastboot
sh0w 0f said:
Do you have your bootloader unlocked?
---------- Post added at 04:33 PM ---------- Previous post was at 04:01 PM ----------
If you have your bootloader unlocked you can download the huawei firmware finder just search it and you can use the huawei update extractor (that can be found in xda) then extract the system img then you can flash it through fastboot
Click to expand...
Click to collapse
Finally got the problem. I`ve phone bought in russia, and no one can find a firmware for it in public. If anyone flashed LOS\RR after v140 update, than they won`t flash stock due to wrong CUST\USERDATA images. Couldn`t find firmware for C170 and C10.
hey, do you have any custom ROM for Huawei y6 prime 2018?
[email protected] said:
Hello!
I have ATU-l31 with FRP unlock and bootloader opened. Unfortunately, after i have installed LOS port for this phone, i cannot return to stock firmware, because when i flash stock rom phone goes to bootloop in huawei logo. Also, sometimes it says that userdata partition is corrupted. Surprisingly, LOS can be therefore installed successfully. The issue is critical because of battery drain bug in LOS.
The procedure i`m following is:
using fastboot:
Code:
1. fastboot flash ramdisk ramdisk.img.
2. fastboot flash kernel kernel.img.
3. fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img -u(due to i cannot erase partition for some reason)
4. fastboot flash system system.img
after process complete - immediately run stock recovery and make wipe data\factory reset.
i tried this several times, also using 5. fastboot flash cust cust.img All *.img files were extracted from UPDATE.APP files from fullota for my device.
What am i doing wrong?
Click to expand...
Click to collapse
Just you use false command(fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img
im having the same issue please help, im getting stucked on the "your device cant be trusted" thing after the flash and reboot