Hi guys, I have a problem with a S6 edge that goes in recovery and says "DM-Verity verification falled, need to check drk first"
I've tried to install the last stock firmware for this model but it always says the same.
Can u help me to solve this problem? Thank u very much.
DRK is damaged. You need to download the newest stock firmware from sammobile.com or I can probably provide you a link from my dropbox. What carrier is it on? Then you need to unzip the firmware then open the tar archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this program:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy and paste the system.img and boot.img into the directory and run the batch file. After it's done it will spit out a system.tar.md5 and boot.tar.md5 file.
Flash each of those individually with Odin. Phone should boot. If you update or reset the phone it will stick on the Samsung logo again. I can repair the DRK on all Exynos chip phones, but it cannot be done remotely because must use a UART cable =(
IMEIRescue said:
DRK is damaged. You need to download the newest stock firmware from sammobile.com or I can probably provide you a link from my dropbox. What carrier is it on? Then you need to unzip the firmware then open the tar archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this program:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy and paste the system.img and boot.img into the directory and run the batch file. After it's done it will spit out a system.tar.md5 and boot.tar.md5 file.
Flash each of those individually with Odin. Phone should boot. If you update or reset the phone it will stick on the Samsung logo again. I can repair the DRK on all Exynos chip phones, but it cannot be done remotely because must use a UART cable =(
Click to expand...
Click to collapse
The Phone is vodafone_italia brand, i already downloaded and flashed via odin the rom (all in one tar). I Will try now to do as you said now, but how can i fix the problem of drk for ever?
BlackSkorpion said:
The Phone is vodafone_italia brand, i already downloaded and flashed via odin the rom (all in one tar). I Will try now to do as you said now, but how can i fix the problem of drk for ever?
Click to expand...
Click to collapse
Gotta flash just system and boot files. Full firmware won't do it. DRK can only be fixed via uart with the correct hardware. I have the stuff to do it but must have it in hand
IMEIRescue said:
Gotta flash just system and boot files. Full firmware won't do it. DRK can only be fixed via uart with the correct hardware. I have the stuff to do it but must have it in hand
Click to expand...
Click to collapse
i will try to do as u said right now. do i have to flash first system or boot?
BlackSkorpion said:
i will try to do as u said right now. do i have to flash first system or boot?
Click to expand...
Click to collapse
I always do system then boot
IMEIRescue said:
I always do system then boot
Click to expand...
Click to collapse
get stuck on "nand write start" when tryin' to flash system.tar.md5
BlackSkorpion said:
get stuck on "nand write start" when tryin' to flash system.tar.md5
Click to expand...
Click to collapse
Try it again? Have to hold volume down home power until it reboots back to download again.
i changed the odin version to a newer and it has started booting, i'm waiting for what will happen!
So, at the moment the phone will work until a reset or an update? because of the drk problems, right?
BlackSkorpion said:
i changed the odin version to a newer and it has started booting, i'm waiting for what will happen!
So, at the moment the phone will work until a reset or an update? because of the drk problems, right?
Click to expand...
Click to collapse
Yes sir. Youre good as long as you dont reset ir update.
I'm a physical business and I am an eBay powerseller doing remote phone repairs.
I have the tools to fix it perm but need the phone in hand. If you wanted to you could mail it to me and I'll fix the drk and return it free of charge. I only require you pay return shipping.
IMEIRescue said:
Yes sir. Youre good as long as you dont reset ir update.
I'm a physical business and I am an eBay powerseller doing remote phone repairs.
I have the tools to fix it perm but need the phone in hand. If you wanted to you could mail it to me and I'll fix the drk and return it free of charge. I only require you pay return shipping.
Click to expand...
Click to collapse
thank you a lot for your help. unfortunately the phone isn't mine, so I must ask my friend if he wants send it to you to fix the drk...anyway thank youu!
BlackSkorpion said:
thank you a lot for your help. unfortunately the phone isn't mine, so I must ask my friend if he wants send it to you to fix the drk...anyway thank youu!
Click to expand...
Click to collapse
No problem was just offering the help if you wanted it glad you're up and running again
Related
hi,
this morning i downloaded a i9305's stock rom in order to port it in my device (i9300) by using dsixda kitchen port tool. i ve flashed the edited rom and i got bootloop, then i tried to go to recovery i got black screen mixed with blue line (like a panic kernel). i pulled out the battery, flashed a stock rom by odin. the results are : touchscreen not responding, phone very slow to boot up
i tried everythings to restore it (factory reset, wipe dalvik cache, formated system, flashed original rom, full s/w with pit,pda,modem,csc....please help me
thanks
Allthough it is considered very risky try to flash stock fw with repartition ticked and pit file
Sent from my GT-I9300 using xda app-developers app
yes i know but any solution ?
Stay a way from pit files if it boots .
jje
so no response ?
no one can help me ?
You have asked got reply's tried most that can be advised all that is left is a paid for service repair .
jje
If you haven't tried already - I would repartition with pit first. (Make sure repartition is ticked)
If that fails then its possible the bootloader has been somewhat damaged. how far does the boot progress?
would need a sboot.bin that is within a tar file to flash via Odin - bit risky though!
edit
(can get sboot.bin.tar file from here http://forum.xda-developers.com/showthread.php?t=1916796
but that thread is for phone s that do not go into download mode)
but research, so you are conffident about what your doing
AbuYahya said:
If you haven't tried already - I would repartition with pit first. (Make sure repartition is ticked)
If that fails then its possible the bootloader has been somewhat damaged. how far does the boot progress?
would need a sbin file to flash via Odin - bit risky though!
Click to expand...
Click to collapse
where i can get sbin ?
edit: i ve tried this but no changes !
machu28 said:
where i can get sbin ?
Click to expand...
Click to collapse
Although I have flashed sboot.bin files on prev devices I have not done it on the SGS3.
I have left a clarification request on the aforementioned page
edit
there is also one post at this thread: http://forum.xda-developers.com/showthread.php?t=1918667&page=2
You're the second person I've heard that this happened to (Same screen corruption, touch not working afterwards), glad to know this wasn't related to my kernel. Seems that you have a wrong Melfas firmware going on on your device now.
machu28 said:
edit: i ve tried this but no changes !
Click to expand...
Click to collapse
if bootloaders and PIT with repartitioned and a stock ROM and Modem all together failed.
then likely need to to open phone to sort it out
------->know some experienced doing it or
------>service centre
possible hardware failure
AndreiLux said:
You're the second person I've heard that this happened to (Same screen corruption, touch not working afterwards), glad to know this wasn't related to my kernel. Seems that you have a wrong Melfas firmware going on on your device now.
Click to expand...
Click to collapse
any idea how to restore it ?
AbuYahya said:
if bootloaders and PIT with repartitioned and a stock ROM and Modem all together failed.
then likely need to to open phone to sort it out
------->know some experienced doing it or
------>service centre
possible hardware failure
Click to expand...
Click to collapse
isn't a problem of drivers binary ?
machu28 said:
where i can get sbin ?
edit: i ve tried this but no changes !
Click to expand...
Click to collapse
machu28 said:
isn't a problem of drivers binary ?
Click to expand...
Click to collapse
I'm not sure what your asking?
AFAIK most of the drivers are within kernel and some with in ROM.
so if you successfully flash it with Stock ROM (includes kernel and ROM and modem) then they return to stock .
if your flashing is unsuccessful/failed on Odin, then you could try the SDcard technique
But personally I would send for warranty repair.
machu28 said:
any idea how to restore it ?
Click to expand...
Click to collapse
No, not right now, sorry. By the way this is now a hardware problem, you won't fix it through flashing anything.
AFAIK most of the drivers are within kernel and some with in ROM.
so if you successfully flash it with Stock ROM (includes kernel and ROM and modem) then they return to stock .
Click to expand...
Click to collapse
Some things are hardware firmwares and have nothing to do with the ROM, the touchscreen is one of them.
AbuYahya said:
I'm not sure what your asking?
AFAIK most of the drivers are within kernel and some with in ROM.
so if you successfully flash it with Stock ROM (includes kernel and ROM and modem) then they return to stock .
if your flashing is unsuccessful/failed on Odin, then you could try the SDcard technique
But personally I would send for warranty repair.
Click to expand...
Click to collapse
yes send it for repair is my last option. unbelievable that software kills hardware !!
Some things are hardware firmwares and have nothing to do with the ROM, the touchscreen is one of them.
Click to expand...
Click to collapse
can i use "nand erase all" in odin ?
machu28 said:
can i use "nand erase all" in odin ?
Click to expand...
Click to collapse
No. The firmware isn't on the NAND.
I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
smwoodward said:
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
Click to expand...
Click to collapse
Here's a little more info that might help. I tried booting the device without holding the buttons just a second ago, and this is what is on the screen.
Image size too large! W:1080, H:1920
display image fail
Secure Fail: Kernel
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
smwoodward said:
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
Click to expand...
Click to collapse
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
jaredb03 said:
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
Click to expand...
Click to collapse
I haven't found anything. is there seriously no stock rom for this phone?
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
jaredb03 said:
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
Click to expand...
Click to collapse
I can get it into download mode. How do you get it into recovery?
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
chapelfreak said:
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
Click to expand...
Click to collapse
I have 2 megas in my shop right now that the same thing happened to them. Now they cannot be restored through ODIN and Kies says that the model/SN is incorrect.
I got the same problem as well tired to root it didn't work then tired to flash stock rom and I.got display image.to large can some give me right file for rogers Canada cell please and.what.do I need.checked.off in odin
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
can u give another link for those files, plz ? cannot download them from those links.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
Click to expand...
Click to collapse
nicelys said:
can u give another link for those files, plz ? cannot download them from those links.
Click to expand...
Click to collapse
The links work good at my end, but i have the i527m (canadian version) and i cannot use the files, but all the links work.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Click to expand...
Click to collapse
This worked great for me, I had to leave off the PIT file though. :good:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Dudmaster said:
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
What kind of brick?
rafaelpinaf said:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
Click to expand...
Click to collapse
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
Even you have to put the phone in Download mode?
Edit: I tried the same and it still does not work :/
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
you fail because you need a pit file..I can flash my normal firmware without a problem..but if I try a other one for example a provider one..it fails..for that we need the pit..and for that we need root..to extract it from the phone..and I don't won't to root ATM..
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
rafaelpinaf said:
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
Click to expand...
Click to collapse
you just need the version as firmware...you had before on the phone..this should flash
Alex-V said:
you just need the version as firmware...you had before on the phone..this should flash
Click to expand...
Click to collapse
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
warning screen is no problem..it's still the download mode..but you need to know the firmware..may try to reboot both.. phone get into the warning mode again..to ensure good connection and retry smart switch
rafaelpinaf said:
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
Click to expand...
Click to collapse
I've had this problem before, are you planning on rooting as well?
tiboric said:
I've had this problem before, are you planning on rooting as well?
Click to expand...
Click to collapse
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
rafaelpinaf said:
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
Click to expand...
Click to collapse
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
tiboric said:
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
Click to expand...
Click to collapse
Does the CF Autoroot work with G925I?
rafaelpinaf said:
Does the CF Autoroot work with G925I?
Click to expand...
Click to collapse
according to this you can use 925F version but I can not confirm my self as i don't have the device, If you don't mind rooting and tripping knox, I don't think you can do much more harm
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
I also went through this problem too, and this helped thank you
But also for another phone I had to flash using a different computer for this to work.
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
Maybe you can try each of the stock versions until you get the right one for your particular device. Also maybe a model number would help someone on here to identify what version you have, I don't know just throwing that out there.
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
rafaelpinaf said:
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
Click to expand...
Click to collapse
I can't link to the page I go to because of my noob post count but its samsung-updates in google. There is a whole section with various G925i versions I'm sure you'll find it there.
Ok just got replacement S6 edge had D0l1 firmware on it out the box...flashed unikernel in ODIN on it for root....booted just fine and had root...then flashed latest TWRP through ODIN tried to reboot into recovery Now phone won't boot. if I force a restart it does Sammy logo then a white flash real quick to black screen followed by a vibrate then just stays black. Only thing I can do is get it in DL mode.
Now I have tried to DL the D0l1 Firmware from 2 different sources on here at XDA so I can ODIN back to stock but can't get Odin to recongize the zip.....so I extracted the files but says something is corrupt?. I am not a noobie when it comes to rooting and flashing and this is the deepest of trouble I have ever been in as far as Bricking a device. I have no clue what to do now???? Any help please!
Honestly, all I need is the D0l1 firmware which I cannot somehow get without it being a corrupt file
I just don't get it.....Odin will not recongize the D0l1 firmware for me to flash? I just Odin'd back my other S6 edge with broken screen to send back for insurance claim no problem with c09 firmware or the # before this D0l1. 3 different download sources same thing Odin will not see the zip file after clicking on AP.
I can' boot into recovery..does anybody have the stock recovery for tmobile that I can flash in ODIN??
Did you unlock the bootloader yet?
The Sickness said:
Did you unlock the bootloader yet?
Click to expand...
Click to collapse
How can I do it if I can't boot the phone?
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
The Sickness said:
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
Click to expand...
Click to collapse
Yes DL mode is the only thing I can get into...can you link me or get the file I need to flash in ODIN? bro I really need to have a working phone by tomorrow as I work from it! SMH....
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
Ok I tried to DL the D0l1 firmware from couple other places on here and when I unzipp it Winrar is popping up message saying the the file is corrupt but it unzips anyway then when I flash in ODIn it says Fail....not sure if that's because of the file or this new bootloader from Sammy is ****ing things up for people like us? I'm staring to get nervous....this DL from Sammy is gonna be a long time.
Also, I just noticed they have ODIN 3.10.7 out.....gonna DL that also as I have 3.10.6 still. see if that helps at all.
Yes...the dl will take a minute. If possible just leave your pc alone while it downloads.
If Winrar says its corrupted then it is. No sense in trying to flash it
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
OK, so I downloaded the file but like I said earlier (this is weird) When I unzip this file.....Winrar pops up and says the (archive is corrupt) but it unzips anyway but takes longer than your average file to unzip.....load it up in ODIN and when I start it goes through process and just fails? what can I do now?
How can the file be corrupted straight from Sammy???
Is there anyway you can get me the file already unzipped not saying it was corrupted?
I can upload the file. But it will take a while
The Sickness said:
I can upload the file. But it will take a while
Click to expand...
Click to collapse
Bro....I think I might be ****ed honestly, I hope not but it seems like if you get stuck in a BL with this new loader....it will not let you flash a stock image. My phone says in red at top when I force a restart (Recovery is not seadroid) I tried extracting just the recovery out of the D0l1 firmware and packed it up as a TAR and flashed but it just hangs and never completes the process. I have searched google to the end of the earth about trying to recover after this new firmware update but can't anything or anybody successful....just people stuck like me. Wish I would have just let it go and rolled stock cause I was gonna jump to the nexus probley.....but you and some others showed you were rooted and good....it all went downhill after odin'd TWRP
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
The Sickness said:
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
Click to expand...
Click to collapse
Mannnnnnnn, I hope your right....I have got myself out of these jams a bunch of times but this one seems lost.
I will post the link in the morning
The Sickness said:
I will post the link in the morning
Click to expand...
Click to collapse
ok, I'm at work till 5pm so I won't be able to try it till after that......thanks.
https://www.androidfilehost.com/?fid=24052804347846570
The Sickness said:
https://www.androidfilehost.com/?fid=24052804347846570
Click to expand...
Click to collapse
Thanks, gonna DL now then try to flash in ODIN....Did you check if it said corrupt after unzipping?
Ok just tried it.................ugh same thing.
sboot.bin
nand write start!!
failed!
complete (write) operation failed!
IDK what to do bro.....****ing $800 paperweight till someone figures this bull**** new bootloader out.