Brick device or screen not working - OnePlus X Q&A, Help & Troubleshooting

Hello I root my device and while flash CM13 got error 7 occur so from some where I read to change firmware and I flash it but after that screen not wake up and can't do anything .I check after and I saw it's one plus one firmware .

Bricked
"And on that bombshell!"
Sent from Smokin G928C Rockin Audax+MM

Can you still boot TWRP?
If so flash the stock image. Use ADB sideload if you have to.

Can you boot to fastboot screen ?
Sent from my ONE E1001 using Tapatalk

RWBY said:
Can you boot to fastboot screen ?
Sent from my ONE E1001 using Tapatalk
Click to expand...
Click to collapse
no

jimmy_135 said:
no
Click to expand...
Click to collapse
If you cannot access Fastboot or get the device to boot in any mode you're bricked.
There is a thread on how to recover from a hard brick.
I don't have it marked but it's there.
That being said flashing a completely different OS than what your device runs is a sure fire way to turn it into an expensive paperweight.
"And on that bombshell!"
Sent from Smokin G928C Rockin Audax+MM

jimmy_135 said:
Hello I root my device and while flash CM13 got error 7 occur so from some where I read to change firmware and I flash it but after that screen not wake up and can't do anything .I check after and I saw it's one plus one firmware .
Click to expand...
Click to collapse
You can find help at this thread. You can even PM him if you face difficulty.

my device goes in fastboot mode now but dont have any backup rom locally so how i flash any rom

jimmy_135 said:
my device goes in fastboot mode now but dont have any backup rom locally so how i flash any rom
Click to expand...
Click to collapse
I can see my device storage in computer in fastboot, recovery mode. All you need is adb drivers.

jimmy_135 said:
my device goes in fastboot mode now but dont have any backup rom locally so how i flash any rom
Click to expand...
Click to collapse
Ahhhhh good information you can fix it if you can get to fastboot I'd search in the OPX general section other the Q&A Troubleshooting thread
"And on that bombshell!"
Sent from Smokin G928C Rockin Audax+MM

Dude. Your onyx still alive ?
Sent from my ONE E1001 using Tapatalk

RWBY said:
Dude. Your onyx still alive ?
Sent from my ONE E1001 using Tapatalk
Click to expand...
Click to collapse
Yup, he fixed that.

I think the problem is that some users don't see diffirence between fastboot and recovery

Related

[Q] Please Help! YP-G70CW/NEE wont start! Black Screen!

I have Galaxy s WiFi 5.0 and i have tried to install the official firmware but now my device get a Black Screen only! I cant open it and the UnBrickable Resurector can't detect it ! Please help me. I bought the device yesterday !
Help please
Ahmed Karim said:
I was taring to restore to official firmware with Odin, but something wrong happened and closed Odin. When I restarted my device i got this error and i can't got to download mod or recovery mod.
View attachment 1016059
Any Idea ?
Click to expand...
Click to collapse
That is download mode. Connect it and odin will recognize it.
Sent using Tapatalk
klin1344 said:
That is download mode. Connect it and odin will recognize it.
Sent using Tapatalk
Click to expand...
Click to collapse
Does it take a long time to install a firmware?
This is my first time to use Samsung mobile, so am a Nope
http://imageshack.us/photo/my-images/844/131210588377.jpg/
That's the soft break ,
read it ; http://forum.xda-developers.com/showthread.php?t=1465144&page=13
page 13, 14 and 15
connect with computer after flash rj's kernel , you can fix this way.
eng_matt said:
http://imageshack.us/photo/my-images/844/131210588377.jpg/
That's the soft break ,
read it ; http://forum.xda-developers.com/showthread.php?t=1465144&page=13
page 13, 14 and 15
connect with computer after flash rj's kernel , you can fix this way.
Click to expand...
Click to collapse
I now have black screen. after that I have tried to install a firmware with odin
Sent from my E15i using xda premium
Ahmed Karim said:
I now have black screen. after that I have tried to install a firmware with odin
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Which firmware? You flashed one with the wrong bootloaders so that's why it doesn't turn on.
Sent using Tapatalk
klin1344 said:
Which firmware? You flashed one with the wrong bootloaders so that's why it doesn't turn on.
Sent using Tapatalk
Click to expand...
Click to collapse
I flashed This CODE_G70XXKPH_CL1013658_REV01_user_low_ship_HOME.tar.md5
Ahmed Karim said:
I flashed This CODE_G70XXKPH_CL1013658_REV01_user_low_ship_HOME.tar.md5
Click to expand...
Click to collapse
A home version dosen't contain the bootloaders but what did you do to get it like this?
Please do a search in the dev section. There's a way to get this fixed. You need to follow the steps.
cvcduty said:
Please do a search in the dev section. There's a way to get this fixed. You need to follow the steps.
Click to expand...
Click to collapse
I didn't find any Thread about this problem !
black
Do you see the blackscreen after the samsung logo?
I had that too! My luck was CWM. I installed it before and could get into it.
Then I had to restore an old backup.
crowelfly said:
Do you see the blackscreen after the samsung logo?
I had that too! My luck was CWM. I installed it before and could get into it.
Then I had to restore an old backup.
Click to expand...
Click to collapse
No before the samsung logo. I cant install any rom cuz pc cant detect my device
Ahmed Karim said:
I didn't find any Thread about this problem !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1386669
Go towards the end of the thread.
I had a black screen brick and used this method to get mine resurrected.
Good luck.
cvcduty said:
http://forum.xda-developers.com/showthread.php?t=1386669
Go towards the end of the thread.
I had a black screen brick and used this method to get mine resurrected.
Good luck.
Click to expand...
Click to collapse
I have tried UnBrickable Resurector but it didn't recognize my device. How did you fix your device?
Ahmed Karim said:
I have tried UnBrickable Resurector but it didn't recognize my device. How did you fix your device?
Click to expand...
Click to collapse
Mine were all black screen but when I plugged into the PC, I would get it recognized as SEC-S5.... (can't recall the exact driver it was looking for). So mine was semi recognized. Now, if you are telling me that your PC does not recognize it at all, I am not sure what to tell you.

[Q] HELP! I flashed clockworkmod recovery before unlocking bootloader LG 4XHD

Hello I have a problem with my LG optimus 4XHD. I didn't like the 4.1.2 lg skinned android so i wanted to install a custom rom. I started by rooting my phone that worked but then i flashed clockworkmod recovery without unlocking the bootloader. Now i can't enter my recovery anymore but i can still boot into android. Now my question is: Can i still unlock the bootloader now without bricking my phone? Or is there another fix for a problem like this. Can someone please help me?
Thanks!
AndroidLG4XHD said:
Hello I have a problem with my LG optimus 4XHD. I didn't like the 4.1.2 lg skinned android so i wanted to install a custom rom. I started by rooting my phone that worked but then i flashed clockworkmod recovery without unlocking the bootloader. Now i can't enter my recovery anymore but i can still boot into android. Now my question is: Can i still unlock the bootloader now without bricking my phone? Or is there another fix for a problem like this. Can someone please help me?
Thanks!
Click to expand...
Click to collapse
How did you flash CWM without unlocking bootloader?
And I think the bootloader can only be unlocked only with stock recovery.
Sithu Htun said:
How did you flash CWM without unlocking bootloader?
And I think the bootloader can only be unlocked only with stock recovery.
Click to expand...
Click to collapse
Thanks for replying i flashed CWM using the Rom manager app. Do you have any idea if i can get the recovery to work again?
You gotta find stock recovery and flash like you did in CWM recovery.
This is my idea and true in logical. Isn't it.
Try at your own risk and Good luck, mate.
Sent from my G610-U00 using xda app-developers app
Sithu Htun said:
You gotta find stock recovery and flash like you did in CWM recovery.
This is my idea and true in logical. Isn't it.
Try at your own risk and Good luck, mate.
Sent from my G610-U00 using xda app-developers app
Click to expand...
Click to collapse
Thank you for tying to help me .Finding a stock recovery and flash it looks pretty hard. I would like to know why i can't unlock my bootloader now? Does unlocking the bootloader require you to have access to the recovery? Again thanks for helping i really appreciate it
I have unlocked many bootloaders of many MTK devices. The phone will be reboot to stock recovery and format the whole phone after unlocking bootloader. So I said that you need stock recovery.
Sent from my SGH-I747 using xda-developer app
Sithu Htun said:
I have unlocked many bootloaders of many MTK devices. The phone will be reboot to stock recovery and format the whole phone after unlocking bootloader. So I said that you need stock recovery.
Sent from my SGH-I747 using xda-developer app
Click to expand...
Click to collapse
Ah oke i didn't know that. Do you know where I can get a stock recovery for my phone? And if i find one how can i flash it?
AndroidLG4XHD said:
Ah oke i didn't know that. Do you know where I can get a stock recovery for my phone? And if i find one how can i flash it?
Click to expand...
Click to collapse
You gotta find your stock recovery yourself by googling or request approriate one on the forum.
And see this thread http://forum.xda-developers.com/showthread.php?t=2163974 to make a flashable zip.
Or try this flashing recovery.img directly using Mobile uncle tools (I am not sure this would work. 50% to work)
See my thread here to try latter way.
http://forum.xda-developers.com/showthread.php?t=2686654
Follow the steps 2, 3 and 5.
Good luck, bro.
Either your phone is bricked or CWMR is not flashed.
Sithu Htun said:
You gotta find your stock recovery yourself by googling or request approriate one on the forum.
And see this thread http://forum.xda-developers.com/showthread.php?t=2163974 to make a flashable zip.
Or try this flashing recovery.img directly using Mobile uncle tools (I am not sure this would work. 50% to work)
See my thread here to try latter way.
http://forum.xda-developers.com/showthread.php?t=2686654
Follow the steps 2, 3 and 5.
Good luck, bro.
Click to expand...
Click to collapse
Again thanks alot for trying to help me. But i got one more question. i found a video on how to restore a LG device using the LG mobile support tool ( http://www.youtube.com/watch?v=ASllzBNc6hw ).
My question is would this fix the problem I have?
Sithu Htun said:
You gotta find your stock recovery yourself by googling or request approriate one on the forum.
And see this thread http://forum.xda-developers.com/showthread.php?t=2163974 to make a flashable zip.
Or try this flashing recovery.img directly using Mobile uncle tools (I am not sure this would work. 50% to work)
See my thread here to try latter way.
http://forum.xda-developers.com/showthread.php?t=2686654
Follow the steps 2, 3 and 5.
Good luck, bro.
Click to expand...
Click to collapse
I FIXED IT YEAAA i used lg mobile support tool. But thanks alot for your help and time.:laugh:
AndroidLG4XHD said:
I FIXED IT YEAAA i used lg mobile support tool. But thanks alot for your help and time.:laugh:
Click to expand...
Click to collapse
WOW!
Sounds cool!
Glad to hear!

Honor 7 (PLK L01) bricked. Func No: 16 (lpm3 image) load failed

Hello all,
my friend has flashed a zip file over TWRP on his device and after that, device want start. It load the rescue mode and writes
"Attention!
Please update system again
Error!
Func NO : 16 (lpm3 image)
Error NO : 2 (load failed)"
I tried to unbrick it with multitool and manually with fastboot. Writing of image files (BOOT, CUST, SYSTEM and RECOVERY) is everytime succesiful. After rebooting I'm landing in Rescue mode again. Device can't be switched off. Fastboot mode loads when I press the power button long enough and connect the device to PC short time after the first viration.
Force update with 3 key method also not working. Recovery mode can't started too.
The device had Marshmallow (not sure which version) before this issue. Bootloacker is unlocked.
Try to the same but with transitional package B300. It's saffer.
zinko_pt said:
Try to the same but with transitional package B300. It's saffer.
Click to expand...
Click to collapse
What should I try? Force Update don't work. in transitional package, Boot, Recovery or system image files are not present.
smldmr said:
What should I try? Force Update don't work. in transitional package, Boot, Recovery or system image files are not present.
Click to expand...
Click to collapse
If you go with a lollipop Rom you might get botloop since boot.img and recovery.img are not compatible from lollipop to marshmallow and vice versa.
zinko_pt said:
If you go with a lollipop Rom you might get botloop since boot.img and recovery.img are not compatible from lollipop to marshmallow and vice versa.
Click to expand...
Click to collapse
But I have not really a boot loop. Device starts to rescue mode and waiting for me. I flashed different marshmallow versions but nothing helps. I don't know, what the college tried to install over TWRP. I thing some non writable partitions are not okay and I can't correct this over fastboot.
smldmr said:
But I have not really a boot loop. Device starts to rescue mode and waiting for me. I flashed different marshmallow versions but nothing helps. I don't know, what the college tried to install over TWRP. I thing some non writable partitions are not okay and I can't correct this over fastboot.
Click to expand...
Click to collapse
Just try with different boot and recovery versions. Those are usually the picky ones.
What did he flashed?
Sent from my honor 5X using XDA Labs
smldmr said:
But I have not really a boot loop. Device starts to rescue mode and waiting for me. I flashed different marshmallow versions but nothing helps. I don't know, what the college tried to install over TWRP. I thing some non writable partitions are not okay and I can't correct this over fastboot.
Click to expand...
Click to collapse
If it doesn't start then it's a bootloop. I forgot to ask you if it was boot unlocked...
zinko_pt said:
Try to the same but with transitional package B300. It's saffer.
Click to expand...
Click to collapse
You might want to bring it to service center now.
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
You might want to bring it to service center now.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
This is probably the only solution.
smldmr said:
This is probably the only solution.
Click to expand...
Click to collapse
Yes and I hope you get it fixed if not replaced.
Sent from my honor 5X using XDA Labs
Dude,time to change mainboard.
I bring to service centre and complain
They change it for me foc although my warranty expired.
heehaa123 said:
Dude,time to change mainboard.
I bring to service centre and complain
They change it for me foc although my warranty expired.
Click to expand...
Click to collapse
How much did it cost you?
Sent from my Galaxy Tab 3 using XDA Labs
heehaa123 said:
Dude,time to change mainboard.
I bring to service centre and complain
They change it for me foc although my warranty expired.
Click to expand...
Click to collapse
Free of charge? That's so amazing.
Lucky you and great customer support from Huawei.
zinko_pt said:
Free of charge? That's so amazing.
Lucky you and great customer support from Huawei.
Click to expand...
Click to collapse
Yea but you have to pretend you dont know what happen.
---------- Post added at 06:11 AM ---------- Previous post was at 06:11 AM ----------
adriansticoid said:
How much did it cost you?
Click to expand...
Click to collapse
Its free
heehaa123 said:
Yea but you have to pretend you dont know what happen.
---------- Post added at 06:11 AM ---------- Previous post was at 06:11 AM ----------
Its free
Click to expand...
Click to collapse
That's great. Considering your warranty expired.
Sent from my Galaxy Tab 3 using XDA Labs
Omg. What zip did he flash? He got lucky
Tmobilefan906 said:
Omg. What zip did he flash? He got lucky
Click to expand...
Click to collapse
It's not luck, there are more stories like this. I think it's a general Huawei policy.
zinko_pt said:
It's not luck, there are more stories like this. I think it's a general Huawei policy.
Click to expand...
Click to collapse
I meant lucky that the device wasn't borked
Tmobilefan906 said:
I meant lucky that the device wasn't borked
Click to expand...
Click to collapse
My thoughts too. Maybe he flashed something not meant for the phone.
Sent from my honor 5X using XDA Labs

twrp on b360?

i coudnt istall twrp on b360 ,, trieda few times,
i have an unlocked bootloader, and heres what ive done few times
adb devices
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
now, adb reboot recovery will get me to stock recovery!
can u give me screenshot from CMD direct after this command : (fastboot flash recovery twrp.img
) ?
Romiui said:
can u give me screenshot from CMD direct after this command : (fastboot flash recovery twrp.img
) ?
Click to expand...
Click to collapse
just updated my windows..have to install drivers and adb will give you right after completing everything,
thilak devraj said:
just updated my windows..have to install drivers and adb will give you right after completing everything,
Click to expand...
Click to collapse
That would be a great help in solving your problem. yes please post it right away.
ya sure ! ..
@Romiui @Andriansticoid
another problem now, after updating my pc, fastboot is not detecting my device, adb works well though
please someone help me with this, i have ubuntu dualbooted, and eventhough i tried in terminal too, adb responds well but not fastboot
and ive attached the screen from terminal,please have a look
thilak devraj said:
@[email protected]
another problem now, after updating my pc, fastboot is not detecting my device, adb works well though
please someone help me with this, i have ubuntu dualbooted, and eventhough i tried in terminal too, adb responds well but not fastboot
and ive attached the screen from terminal,please have a look
Click to expand...
Click to collapse
What drivers are you using?
Sent from my honor 5X using XDA Labs
adriansticoid said:
What drivers are you using?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
on windows, im using universal adb drivers from google.inc
in ubuntu, i dint think the drivers are needed
try use the CMD with Admin Rights .
will work =) .
Romiui said:
try use the CMD with Admin Rights .
will work =) .
Click to expand...
Click to collapse
will try, and one more doubt, do i have to install android studio full package and java
thilak devraj said:
will try, and one more doubt, do i have to install android studio full package and java
Click to expand...
Click to collapse
No you don't need that.
Sent from my honor 5X using XDA Labs
finally fastboot is now working, but couldnt flash twrp ,,it says neccessary to unlock frp , and i have alredy unlocked my bootloader, i have screenshot,, please help
thilak devraj said:
finally fastboot is now working, but couldnt flash twrp ,,it says neccessary to unlock frp , and i have alredy unlocked my bootloader, i have screenshot,, please help
Click to expand...
Click to collapse
it means u have to go for settings > then devs options > then unlock the OEM then try again .. gd luck !
Romiui said:
it means u have to go for settings > then devs options > then unlock the OEM then try again .. gd luck !
Click to expand...
Click to collapse
there's no saperate option for unlock oem in marshmallow build, it was removed with lollipop
thilak devraj said:
there's no saperate option for unlock oem in marshmallow build, it was removed with lollipop
Click to expand...
Click to collapse
he's on stock not CM .
Romiui said:
he's on stock not CM .
Click to expand...
Click to collapse
im on emui 4.1
roll back .. sorry i thought u r into stock 5.0
Romiui said:
roll back .. sorry i thought u r into stock 5.0
Click to expand...
Click to collapse
roll back?to lollipop? but someone already flashed twrp and xposed on marshmallow firmware,
he had already unlocked the oem since he had lolipop =) unlocking is one time job
Romiui said:
he had already unlocked the oem since he had lolipop =) unlocking is one time job
Click to expand...
Click to collapse
i too did unlock the bootloader and tried every custom rom out there, and reverted back to emui only because of volte

Moto e xt830 cant boot

Is it still possible to fix this phone if it stuck at this screen on every boot?
bchiu said:
Is it still possible to fix this phone if it stuck at this screen on every boot?
Click to expand...
Click to collapse
I tried choose every option using volume rocker and use power button to enter but the phone just reboot no matter which option I choose.
bchiu said:
I tried choose every option using volume rocker and use power button to enter but the phone just reboot no matter which option I choose.
Click to expand...
Click to collapse
Unlock the bootloader and flash either stock or custom ROM.
Ujwal Agrawal said:
Unlock the bootloader and flash either stock or custom ROM.
Click to expand...
Click to collapse
I can't unlock the bootloader. I already tried on Motorola website.
bchiu said:
I can't unlock the bootloader. I already tried on Motorola website.
Click to expand...
Click to collapse
There are key combos by which you can clear cache and dalvik cache, this might help. Google it
Seems like none of the options works
bchiu said:
Seems like none of the options works
Click to expand...
Click to collapse
Flash this
https://www.androidfilehost.com/?fid=24052804347833874
Rajendran Rasa said:
Flash this
https://www.androidfilehost.com/?fid=24052804347833874
Click to expand...
Click to collapse
Thanks. But how do I flash since I can't get into any of the options?
bchiu said:
Thanks. But how do I flash since I can't get into any of the options?
Click to expand...
Click to collapse
Flash in fastboot
For more info search YouTube or xda
Rajendran Rasa said:
Flash in fastboot
For more info search YouTube or xda
Click to expand...
Click to collapse
But my bootloader is locked
bchiu said:
But my bootloader is locked
Click to expand...
Click to collapse
You can flash stock rom in locked/unlocked bootloader using fastboot command
Rajendran Rasa said:
You can flash stock rom in locked/unlocked bootloader using fastboot command
Click to expand...
Click to collapse
Okay thanks. Will try that.
N I could not install twrp recovery
bchiu said:
Okay thanks. Will try that.
Click to expand...
Click to collapse
Did it work man???? Wondering if I can get twrp to boot one time on this piece of junk so I can flash superSU over the locked loader to the system partition -.-
Rajendran Rasa said:
You can flash stock rom in locked/unlocked bootloader using fastboot command
Click to expand...
Click to collapse
Thank you so much buddy. I thought it was a write off. Now it's back to live!
bchiu said:
Thank you so much buddy. I thought it was a write off. Now it's back to live!
Click to expand...
Click to collapse
I wonder if that'd fix my issues as well, I got the stock images a while back might as well give it a go xD.
If any of you face a hard brick or soft brick, have a look at my XDA DevDB post. It might be of help to you... Unbrick hard bricked Motorola Moto E - Aravind V. Nair (XDA)
aravindvnair99 said:
If any of you face a hard brick or soft brick, have a look at my XDA DevDB post. It might be of help to you... Unbrick hard bricked Motorola Moto E - Aravind V. Nair (XDA)
Click to expand...
Click to collapse
Thanks bro! Curious as to if the xt1022 and this CDMA model could be interchangeable as far as software/ROMs go
LilAnt530 said:
Thanks bro! Curious as to if the xt1022 and this CDMA model could be interchangeable as far as software/ROMs go
Click to expand...
Click to collapse
Unbrick method is common to a device series. But the files you use aren't. Only the modem files are different as far as I have seen. Correct me if I'm wrong. I don't think any other difference is there. After unbricking, you will get partition errors. Then, simply go to fastboot and use the correct files from your firmware. Instruction are given in my GitHub repository for this project. Read through my post and GitHub README.MD
Between, I'm still making things proper... You can have a look though..
aravindvnair99 said:
Unbrick method is common to a device series. But the files you use aren't. Only the modem files are different as far as I have seen. Correct me if I'm wrong. I don't think any other difference is there. After unbricking, you will get partition errors. Then, simply go to fastboot and use the correct files from your firmware. Instruction are given in my GitHub repository for this project. Read through my post and GitHub README.MD
Between, I'm still making things proper... You can have a look though..
Click to expand...
Click to collapse
Well I have the xt830c model and all i really want is the xt1022 5.1 update lol. I cant acquire root or unlock the bootloader because of worthless straight talk and its my only device

Categories

Resources