http://cgi.ebay.com/Fishbone-Bk-Clr...ccessories&hash=item51959d8eeb#ht_2202wt_1135
Anyone have experience with these? No one on ebay is answering my questions about thickness, etc.
The design of the protective plastic is aesthetically pleasing to me.
I'm hesitant to buy a skin because the MTS is pretty damn big inside my pockets to begin with.
They offer different colors as well. (Plastic/Silicone)
Black/Black White/Black Black/White Red/Black Pink/White
hmm, I have this case and have had really good experiences with it (as opposed to the generic hard rubber plastic cases on ebay). I noticed that the tabs are much thicker and stronger on this case which makes the sliding mechanism a bit more stuff than the other case, but other than that, both pieces have stayed on VERY well for it and never came off. I've dropped it a few times as well and the tabs never failed.
I would probably bet that this is the best case right now until the otterbox case comes out. From what I read on these forums, the bodyglove cases have weak tabs that break easily when the phone is dropped.
Vietnamazing said:
hmm, I have this case and have had really good experiences with it (as opposed to the generic hard rubber plastic cases on ebay). I noticed that the tabs are much thicker and stronger on this case which makes the sliding mechanism a bit more stuff than the other case, but other than that, both pieces have stayed on VERY well for it and never came off. I've dropped it a few times as well and the tabs never failed.
I would probably bet that this is the best case right now until the otterbox case comes out. From what I read on these forums, the bodyglove cases have weak tabs that break easily when the phone is dropped.
Click to expand...
Click to collapse
How thick does it get in your pocket compared to the other hard plastic cases? About the same?
Try the body glove case without the kickstand, front plate and back plate is secured really good. Its only like 10 bucks on ebay.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
It's not too thick at all. I would say about the same as the generic hard rubber plastic cases on ebay.
It is well good, but fast peeling.
Hi!
I wanted to buy a brushed aluminum back cover for my S2 that I found on eBay but I was wondering, will it disrupt the phone signal and interfere with the antenna?
I've attached some pics, I think it makes it look stunning.
Aluminum? It doesn't disrupt any signal. Some magnet does, yet I never seen any disruption when I used my Molife case which had a flip lock magnet.
AWESOME .............!!!!!!!!!!
I recently purchased Mercury Leather Wallet Case from ebay (Link).
I bought a no-name leather flip case from a local shop (I tried to find the same one on ebay for reference, but failed), and it was very nice case. Good quality leather with little padding. BUT, it didn't have any protection at the top and bottom of the phone. And more importantly, there was a magnet behind the phone on the right side, which interfered with s-pen operation. I started taking out the phone whenever I was home, and then I decided to get a new case.
After searching through sites and ebay, I found this Mercury case. I chose this one because the phone was detachable with a jelly case.
First, the case is not as nice as it looks on the photo. It is not real leather, more like plastic and thin. Stitching is well-done for the most part, but it could be better. The magnet closure is using glue and it is already coming apart. I will have to superglue it or tape it up. It can hold up to 4 credit cards, but it barely closes.
The best part of this case is the jelly case. It is better quality than the usual TPU case. It is slippery to slide in and out of my pockets, but provides good grip in my hands. The phone wiggles just slightly in the jelly case, but a very good fit. On the leather case, there is a silicon-based sticky pad, where the jelly case sticks onto. I have had the jelly case on and off multiple times, but it still holds the case very nicely. If I needed to, I can wipe it with a wet towel to clean it.
And here is the second issue. The cutout for camera/speaker/s-pen is slightly out of alignment. If I align the phone to the cutout, outside edge of the phone is at a slight angle from the leather case. If I align the phone to the outside edge of the leather case, camera is off to the side of cutout. It doesn't affect the camera operation, but it is an issue nonetheless.
For the price, I think it is a very good value, because you also get a very good quality jelly case. When I go out, I stick the phone into the flip case. When I am the office or home, I take it out for easy access to the phone.
Oh, it also came with a screen protector, but I already have one on, so I don't know what it is like.
http://www.spigen.com/cell-phone/sa...laxy-note-at-t-case-ultra-capsule-series.html
I just learned that the jelly case included in Mercury Wallet case is exactly the same material as SGP Ultra Capsule Series. I had them side-by-side.
They both seem to be from Korea, so these cases may just have different branding.
So we all like our protective cases... and I agree I think for the average person some type of tpu case or any case that provides some drop security is good. Your basically just looking to save the body of the phone... which i would think could be achieved pretty easily without getting the bigger bulky cases.. like UAG.. Otterbox etc.. if your working 20 feet up i'd say go for it.. otherwise.. why? wouldn't say a slim armor.. or just a slimmer designed case that has a better fit in your pocket do the deed just as well from a normal head to ground drop? I wouldn't think a slimmer case could achieve this easily (I'm not saying i'm right)...
Now for the part we all love.. the screen... so many people get cases.... practically everyone.. but most people tend to not guard the screen the way we should.. I personally believe this is where the money should be spent.. getting a good iloome glass protector or another alternative that will seriously protect the screen from a head drop to concrete etc... at least up your chances substantially from the screen being destroyed....
That is my amateur stance.... now this is why i start the thread.. because the UAG looks nice and very protective... but it adds (excessive?) bulk? couldn't a slim armor or another choice (place good slim protective case here please lol) and as far as my eye can see you can get the iloome flex for a great price.. which i think is a must.. not necessarily the brand but the protector.... so maybe someone can throw something in on a case to save from drops that is quality but slim... and hopefully this thread reminds someone to get a screen protector..... I'm just wondering if these cases are a bit of overkill considering the amount of bulk... and rather if a smaller footprint could basically acheive the same protection from. your normal 7 foot and down worst case scenario... thoughts? advice?
On my razrHD I used an Otterbox defender. So i've been looking around for something similar. But as the N3 already is a huge device to fit in your pocket, i wanted something more slim. The spigen neo wasn't available so I settled for the spigen bounce. I also added a screen protector film. Actually, if your phone drops, I doubt that any screen protector will help much. For me, the screen protector is more for little scratches you get when putting the device into your pocket, bag, or whatever else.
From my expirience, I really loved the silicone of my Otterbox. I could almost put my hand more than 45degrees without the phone slipping from my flat hand. I don't dare doing this with the spigen bounces TPU. Compared to the Otterbox, it's almost slippery.
But the Otterbox made the phone also even heavier than it was already. So i have plenty of reasons not to get a tough case. Instead I ordered a bamboo aluminum bumper. I love the looks,, I think it wont't add much weight and bulk and the back of the phone offers more grip than the spigens TPU and it's also replaceable which wasn't the case on my razr HD. Actually, the only one time I dropped my razr HD was when I was at home and had taken it out of its case to admire the slimness of the phone. Bummer. And I immediately had a scratch on one corner of the kevlar back.
So to sum it up, I plan on using a bumper because the sides of the phone cannot be replaced but the back of the N3 can. The screen won't make a difference with or without protector in my opinion, so I think it's more of a preference thing. I like the thought that I can just peel off the layer of plastic in case of minor scratches. The only last concern I have with my bumper is, that the "housing" of the camera seems to be aluminum which could get scratched because the phone will rest on the housings edge when laid down. The lens won't be affected because it will be angled to any flat surface, and I don't plan on laying my new toy on rough concrete or similar.
Wow. What a long post. But from reading the OP-post, I think it's all about sharing ones thoughts and experience so others can build on it. I hope you didn't mind reading all this.
Thanks but I think your getting screen protectors mixed up from the plastic junk ones two the glass ones that can save a screen... check out YouTube tests on tech 21 or iloome
Sent from my SM-N900V using Tapatalk
loopers said:
Thanks but I think your getting screen protectors mixed up from the plastic junk ones two the glass ones that can save a screen... check out YouTube tests on tech 21 or iloome
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Possibly true, but there'll always be that one little sharp edge the screen drops on so that it gets shattered. And with a screen this big, the likelyhood it's falling "butterside down" is pretty high. Anyway, I'm ok with my screenprotector like it is and I try to be careful not to drop my phone
The most drops I heard of so far was with people who used pouches. The pouch protects as long as the phone is in, but it usually drops down when exerted from the pouch. So I think it may be the same with any other case. Like it was with my razr HD. i never dropped it while it was in the Otterbox. Just the only one time I wanted to use it without my Otterbox.
I quite honestly don't ever see any hard materials landing on my screen, but I do like glass protectors due to the smooth texture and scratch resistance.
I currently use a slim armor and I wouldn't trust it as much as I would if I had an UAG on it even though the slim armor isn't actually that slim...
Kawaisa said:
I quite honestly don't ever see any hard materials landing on my screen, but I do like glass protectors due to the smooth texture and scratch resistance.
I currently use a slim armor and I wouldn't trust it as much as I would if I had an UAG on it even though the slim armor isn't actually that slim...
Click to expand...
Click to collapse
Thanks. Probably go with the uag sadly.. it seems the best all around case though sadly has designer flaws
Sent from my SM-N900V using Tapatalk
loopers said:
Thanks. Probably go with the uag sadly.. it seems the best all around case though sadly has designer flaws
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
From all my research it seems the best protection for the Note 3 is:
MIME Feather Glass protector
+
Polycarbonate Bumper.
What...Why?!?!
Well, first of all the Note 3 has a more sensitive active digitizer and I think the capacitive sensor's been bumped up a notch.
What that means is you can use screen protectors made of glass to give the screen the extra protection it needs.
These are usually VERY protective, and if given the right conditions should last the length of the phone's lifetime (usually 2 years).
The MIME Feather is the THINNEST glass protector available, sitting at 0.15mm its not that much thicker than plastic screen protectors.
Being the thinnest it should be the weakest of the glass protectors, but like I said since glass protectors are REALLY protective it will be more than enough.
And another point to make, this uses the best materials and machining available. Its just a step up, technologically wise, than the cheap 3mm ones.
So it can actually take a beating as much as those cheap 3.3mm glass protectors (which also tank hits, and brush off scratches as nothing).
For $32... its an expensive investment, but being a one off, its probably worth it.
Bumpers.
Is it weird that the Antenna-gate scandal left us with something genius?
Having a bumper which is scratch resistant, shock proof, temperature proof, and just hands down awesome is just... awesome.
I personally don't like bumpers because I feel like they don't protect the phone's front and back-- the truth is they do.
Having a bumper which sits mostly flush on the sides ...BUT protrudes out from the front and rear angles of the phone is magic.
It means dropping the phone will ALWAYS land on the bumper, and shock absorbed, dint free, scratch prevented.
And bumping your phone will ALMOST always ding the bumper.
What this means is a good, high quality bumper can put less "FAT" on your device and still provide the same protection.
I'm all for efficiency.
And why polycarbonate/VaporMG and not Aluminium or Metal?
It doesn't matter what type of metal you have, surrounding the perimeter of the device creates some sort of "force field" a phenomenon known as Faraday Cage.
An expensive metal bumper made by a reputable company will drop ~1 bar of signal, I'm not sure if NFC and Bluetooth are affected. On top of this, not all metals are the same.
Some are poor shock conductors, and won't really protect your phone.
While TPU can get the job done, its not 100% environment/weather proof. Something like a high quality Polycarbonate (think Nikkon DSLR camera housing) will last longer than your device's lifetime, feel great/grippy, and be as protective. Leather isn't a good choice here simply because its not very sturdy (when its just a thin bumper) and won't be able to absorb as much force as these plastics and amorphous metals. Wood seems like a good candidate... good luck in finding the right tree and the right lumberjack!
In conclusion, a very thin glass protector, and a sturdy plastic bumper.
Together they'll absorb almost all the bumps, nicks, and scratches your phone will experience in its lifetime of normal use.
To get better protection, you can always dial up to a 3mm glass protector and a full-case made of TPU/Glass-Metal/Leather, but I honestly don't think it adds as much protection as it adds bulk !
To get maximum protection for those of you who work in construction on skyscrapers... get a really expensive and thick plastic case. Probably one that has a front cover too. Something not far from Otterbox/Griffin/CaseMate/Lifeproof/Seidio/etc cases. Some of these should survive a car driving over it. Meanwhile lads, enjoy wearing a purse to carry your new blunt-force weapon.
Thank you for reading, and be careful out there : l
Kawaisa said:
I quite honestly don't ever see any hard materials landing on my screen, but I do like glass protectors due to the smooth texture and scratch resistance.
I currently use a slim armor and I wouldn't trust it as much as I would if I had an UAG on it even though the slim armor isn't actually that slim...
Click to expand...
Click to collapse
Well, maybe my wording was a little off, which is why I used the "butterside down" example. I meant that if your phone drops and it drops with the screen side down, there'll always be a sharp edge close by or a stone on the ground that just sits there and waits for a phone screen to fall onto it
I also never had any sharp objects falling on my screen so far :silly:
Sorry if I expressed myself incorrectly.
Kangal said:
From all my research it seems the best protection for the Note 3 is:
MIME Feather Glass protector
+
Polycarbonate Bumper.
What...Why?!?!
Well, first of all the Note 3 has a more sensitive active digitizer and I think the capacitive sensor's been bumped up a notch.
What that means is you can use screen protectors made of glass to give the screen the extra protection it needs.
These are usually VERY protective, and if given the right conditions should last the length of the phone's lifetime (usually 2 years).
The MIME Feather is the THINNEST glass protector available, sitting at 0.15mm its not that much thicker than plastic screen protectors.
Being the thinnest it should be the weakest of the glass protectors, but like I said since glass protectors are REALLY protective it will be more than enough.
And another point to make, this uses the best materials and machining available. Its just a step up, technologically wise, than the cheap 3mm ones.
So it can actually take a beating as much as those cheap 3.3mm glass protectors (which also tank hits, and brush off scratches as nothing).
For $32... its an expensive investment, but being a one off, its probably worth it.
Bumpers.
Is it weird that the Antenna-gate scandal left us with something genius?
Having a bumper which is scratch resistant, shock proof, temperature proof, and just hands down awesome is just... awesome.
I personally don't like bumpers because I feel like they don't protect the phone's front and back-- the truth is they do.
Having a bumper which sits mostly flush on the sides ...BUT protrudes out from the front and rear angles of the phone is magic.
It means dropping the phone will ALWAYS land on the bumper, and shock absorbed, dint free, scratch prevented.
And bumping your phone will ALMOST always ding the bumper.
What this means is a good, high quality bumper can put less "FAT" on your device and still provide the same protection.
I'm all for efficiency.
And why polycarbonate/VaporMG and not Aluminium or Metal?
It doesn't matter what type of metal you have, surrounding the perimeter of the device creates some sort of "force field" a phenomenon known as Faraday Cage.
An expensive metal bumper made by a reputable company will drop ~1 bar of signal, I'm not sure if NFC and Bluetooth are affected. On top of this, not all metals are the same.
Some are poor shock conductors, and won't really protect your phone.
While TPU can get the job done, its not 100% environment/weather proof. Something like a high quality Polycarbonate (think Nikkon DSLR camera housing) will last longer than your device's lifetime, feel great/grippy, and be as protective. Leather isn't a good choice here simply because its not very sturdy (when its just a thin bumper) and won't be able to absorb as much force as these plastics and amorphous metals. Wood seems like a good candidate... good luck in finding the right tree and the right lumberjack!
In conclusion, a very thin glass protector, and a sturdy plastic bumper.
Together they'll absorb almost all the bumps, nicks, and scratches your phone will experience in its lifetime of normal use.
To get better protection, you can always dial up to a 3mm glass protector and a full-case made of TPU/Glass-Metal/Leather, but I honestly don't think it adds as much protection as it adds bulk !
To get maximum protection for those of you who work in construction on skyscrapers... get a really expensive and thick plastic case. Probably one that has a front cover too. Something not far from Otterbox/Griffin/CaseMate/Lifeproof/Seidio/etc cases. Some of these should survive a car driving over it. Meanwhile lads, enjoy wearing a purse to carry your new blunt-force weapon.
Thank you for reading, and be careful out there : l[/QUOTE
This was what i was going for.. thank you for the information.. what bumper do you use if u don't mind me asking?
Click to expand...
Click to collapse
loopers said:
This was what i was going for.. thank you for the information.. what bumper do you use if u don't mind me asking?
Click to expand...
Click to collapse
For now I've got this combo:
3mm Explosion Proof Glass
http://www.ebay.com.au/itm/181250089468?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
+
Black Matte Slim Bumper
http://www.ebay.com.au/itm/141097547867?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Next combo:
MIME Feather Glass
http://mimeusa.com/product/galaxy-note-3-feather-glass-tempered-glass-screen-protector/
+
Clear TPU Kickstand Case
http://www.ebay.com.au/itm/281194981583?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Anyone use the Noreve S7 Leather case? http://www.noreve.com/en/galaxy-s7/3219-samsung-galaxy-s7-leather-case.html
It looks like the edges are not completely covered.... if I dropped my phone would this protect it from cracking the glass?
Also, newbie question.... can the leather case allow wireless charging?
Hey.
I don't use the case, but it's pretty nice looking! I doubt it would protect your phone if you were to drop it - there's not enough material to absorb the force from the impact, so most of the force would be transferred directly to your phone.
You could, however, use the case when you're at home and swap it for something more protective for when you're going out.
Yes, leather and plastic cases will allow wireless charging, although metal won't.
Do you think it's relevant that the rounded edges aren't completely covered by the case? I believe the Samsung version completely covers the edges. Would that make the Samsung a better case for protection if I drop it?