Hi, I tried to run remix OS with two displays but with no success. The second screen just shows a black screen with a small cursor at the top left. Is there any way to make using two displays possible with remix?
Thanks!
BruceWayne54 said:
Hi, I tried to run remix OS with two displays but with no success. The second screen just shows a black screen with a small cursor at the top left. Is there any way to make using two displays possible with remix?
Thanks!
Click to expand...
Click to collapse
yeah same here do u guys have any solution for it ?
this is the only thing stopping remix os from being my couch pc
Related
Hi guys!
There is screen burn-in of status bar of my RN3 and I am on Resurrection Remix build and I am using this ROM for a long time.
Does anyone having screen burn-in of status bar on this ROM? Does this ROM is responsible for screen burn as I am not getting screen burn-in of MIUI ROM's status bar.
I think it is at primary stage and can it be fixed? I am using my RN3 from 1.5 years.
Please help me guys!
LCD burn-in? You need to use your phone less On a serious note: there are apps you can try to correct i believe. Also you could buy and install a new screen if you can't live with it.
banana_bender said:
LCD burn-in? You need to use your phone less On a serious note: there are apps you can try to correct i believe. Also you could buy and install a new screen if you can't live with it.
Click to expand...
Click to collapse
Yes. I know that I use my phone a lot than the others.
Same happen with me as at the time of boot when the boot logo appears there is slight flicking image of status bar appears
anurag kamal said:
Same happen with me as at the time of boot when the boot logo appears there is slight flicking image of status bar appears
Click to expand...
Click to collapse
Same here
Hello
On my Max2 appear problem.
As on the screen. On the right part what i draw, sometimes pop-up like another window with full of some color dots. it appears for like 0.5 sec and it appear randomly.
Sometime often sometime no. Its rly annoying, what can be the problem ?
Thanks for ur help
Oh i cant post img bcs i am new user :/ it appear on the Left down side - to center of the screen.
Raizenno said:
Hello
On my Max2 appear problem.
As on the screen. On the right part what i draw, sometimes pop-up like another window with full of some color dots. it appears for like 0.5 sec and it appear randomly.
Sometime often sometime no. Its rly annoying, what can be the problem ?
Thanks for ur help
Oh i cant post img bcs i am new user :/ it appear on the Left down side - to center of the screen.
Click to expand...
Click to collapse
I have same problem. But no solution.
Is anyone experiencing problems typing with the infinite screen on? I'm using stock version, Oreo, Miui 10.2.2...
it seems that at times, a small system bug, where it seems that he thinks I'm using the normal navigation, in the middle of the typing, ends up leaving or going to the home screen ...
Anyone else with this problem or know how to solve?
GAlves07 said:
Is anyone experiencing problems typing with the infinite screen on? I'm using stock version, Oreo, Miui 10.2.2...
it seems that at times, a small system bug, where it seems that he thinks I'm using the normal navigation, in the middle of the typing, ends up leaving or going to the home screen ...
Anyone else with this problem or know how to solve?
Click to expand...
Click to collapse
Yes, same here. But in my case the screen just flickers for a moment instead of going to home screen
akahroba said:
Yes, same here. But in my case the screen just flickers for a moment instead of going to home screen
Click to expand...
Click to collapse
I switched back to the original Android navigation buttons ... I'm going to test to see if it gives the same problem
I am running Blastagator TWRP 3.3.0-0 on an LG G2 with a screen hardware problem. The screen is no longer touch sensitive in the center of the lower part of the screen. Updates to Lineage on this device do not automatically install Magisk, so it needs to be installed manually through TWRP each time I update Lineage. The problem is that installing any zip file through TWRP requires confirmation by moving the slider across the screen, through the dead spot. When I try to do that, the slider drops back as if I lifted my finger off the screen. The same thing happens if I let the screen time out - I can't get past the lock screen without the slider, so I have to crash TWRP and reboot.
Is there an alternative to sliding across the bottom of the screen? I can recompile TWRP if there's a flag in the source code. I've tried sideloading Magisk, but I can't do it because I have to swipe across the bottom of the screen to start sideload mode. If I try it through the ADB command line on a connected LInux system, I get "sideload connection failed", presumably because I haven't put the phone in sideload mode. All roads lead through that sliding bar.
It would be frustrating to have to trash the phone just because of a single bad spot on the sensor. Once in a blue moon the bar slides and I can get Magisk to install, but it's frustrating to keep trying for five or ten minutes hoping I get that one shot.
mobilityguy said:
I am running TWRP 3.3.0-0 on an LG G2 with a screen hardware problem. The screen is no longer touch sensitive in the center of the lower part of the screen. Updates to Lineage on this device do not automatically install Magisk, so it needs to be installed manually through TWRP each time I update Lineage. The problem is that installing any zip file through TWRP requires confirmation by moving the slider across the screen, through the dead spot. When I try to do that, the slider drops back as if I lifted my finger off the screen. The same thing happens if I let the screen time out - I can't get past the lock screen without the slider, so I have to crash TWRP and reboot.
Is there an alternative to sliding across the bottom of the screen? I can recompile TWRP if there's a flag in the source code. I've tried sideloading Magisk, but I can't do it because I have to swipe across the bottom of the screen to start sideload mode. If I try it through the ADB command line on a connected LInux system, I get "sideload connection failed", presumably because I haven't put the phone in sideload mode. All roads lead through that sliding bar.
It would be frustrating to have to trash the phone just because of a single bad spot on the sensor. Once in a blue moon the bar slides and I can get Magisk to install, but it's frustrating to keep trying for five or ten minutes hoping I get that one shot.
Click to expand...
Click to collapse
I believe you can disable the lock screen in the options totally (the slider thing). Not sure though but yes, it's a crap design. Hope someone is able to help
Did you trying to use mouse through otg cable..?
Sent from my SM-N950U using Tapatalk
eyobaaa said:
Did you trying to use mouse through otg cable..?
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Wow. Does it work? I didn't even knew it did lol. Thanks for the tip. Hope OP sees your post and gives it a try
Brilliant! That worked. It appears the mouse has to be plugged in at boot time, but if it is, the arrow appears and the mouse and slider are fully functional in both system and recovery.
By the way, I get around the dead spot on the keyboard when booted into the system by using one of the many Set Orientation apps that allow me to turn the screen upside down. I haven't found an app yet that needs touch sensitivity at the top and bottom of the screen at the same time. Well, games, but I don't play games on an LG G2
I wonder if a Y cable will work on the USB port, so I can plug in a thumb drive for storage and still use a mouse to move the slider to start the backup?
BTW, I checked the TWRP settings screen. There is no setting that affects the slider.
Thank you, eyobaaa.
Glad to hear that the Y cable things i didn't test it why don't you give a try..
Sent from my SM-N950U using Tapatalk
I'll have to buy one to do that. Probably next week.
Hi I am new to using remix os not sure if I am missing something simple or not but After I get the dual boot option select Remix OS and then hit esc to select residential mode the screen goes to sleep on me and doesn't show anything. I have tried several different monitors and different connections form VGA, Display Port and HDMI. I am running this on a Dell Optiplex 3050. Let me know if am I missing anything obvious. Thank you