micromax aq4501..not turning on..even not show charging - Android Q&A, Help & Troubleshooting

i flash stock rom lolipop on my micromax aq4501 successfuly using sp flash tool latest..flashed official rom..after that phone is not turning on or shows charging animation...but phone can be detected by sp flash tool...what will i do nex..please help me

Broo....heating flash ic then reloaded the sw

Related

[Q] sp flash tools not detecting my canvas A116

I got my phone bricked,i'm trying to flash it with sp flash tools,but during process of removing cable and inserting it back sp flash tools does not detect my phone but the computer does as there is a pop sound,please help me

Canvas Nitro A311- Stuck At "Entering Download Mode" When Flashing Stock ROM YGDP

soft bircked & YGDP not working a311
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
@bhavincb check this thread for flashable stock rom for a311 via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
Do you have custom recovery? If yes then follow Bhushan1985's post
if having stock recovery then download latest ygdp tool and while flashing (ENTERING DOWNLOAD MODE) connect your phone WITHOUT BATTERY.
Hope it will help!
---------- Post added at 08:59 AM ---------- Previous post was at 08:57 AM ----------
Check this link for step to step instruction for flashing stock rom with ygdp
when flashing micromax nitro a311 usig ygdp tool it stuck on 80%
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
u need to install & upgrade the drivers
khan_frd2002 said:
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
i also have same problem sir........
k2ajeet said:
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
Click to expand...
Click to collapse
my download stop at 83% and cpb download failed..............................
please help me as possible as.
sp tool also not working it shows brom error 2035
how to update drivers
lokesh314 said:
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
Click to expand...
Click to collapse
i am facing the same problem, i dont know how to update driver, i tried to update from windows update, it says you got the the latest drivers, can you provide me the link/ files for micromaxa311 driver by which my mobile can get detected by sp flash tool (ygdp too)
Same issuew
bhavincb said:
please help me.. I soft bricked my nitro a311 & try to flash stock rom with the help of ygdp.. But it is stucking at "enetering download mode"..
Please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
same issue kya karu bhai
Just FYI: I have a Coolpad F1 (which is the same hardware as the A310). I tried a bunch of ROM's incl. the 7.1.2 Lineage one, but non worked with Pokemon Go (it's my daughters "gaming phone"). So I tried the Micromax stock ROM - and Pokeman Go works. It's a terrible 4.4 ROM with a lot of trash programs built in, so really not worth considering - but Pokeman Go works..
My phone has TWRP 2.8.x installed, but I flashed it with fastboot (only boot & system), which I extracted from the stock cpb-file (4.4.031.P0.141015.8297W_I01.CPB). No need to use ygdp at all - besides using it to split the cpb-file into the flashable images. Wipe data, dalvik and cache in TWRP and then flash with fastboot the boot.img and system.img. I had some problem flashing the system.img, it worked with first formatting it and then flash with "fastboot flash -u system.img".
First install coolpad driver . because ygdp coolpad software.
Then use sp tool and flash
But sptool give error,that time you go to device manager and uninstall the driver,after uninstall coolpad driver automatically taken.and then ygdp detect your device and start flashing.
Don't use battery .
100% successful
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
Me to in the problem

Wanted to flash stock rom on canvas aq5001

i just wanted to restore my micromax canvas aq5001 to its stock rom.But my phone is stuck in the boot loop.Can i proceed using SP tools without usb debugging turned on.

Micromax A311 flashing Ygdp tool stuck at 50% plz help

Please help me,
I am flashing micromax a311 stock rom with ygdp tool
But when flashing ygdp tool stuck at 50%.
When i click on start button then connect phone to pc flashing start but after 50% phone disconnect by it self.
I use all the methods all drivers but not working.
Sp tool flash rom successfully but phone not starting.
Is there any pcb solution.
Plz fix ygdp tool diaconnect issue .
Thanks in advance.

CoolPad Note 3 8676 I02 Dead! Please Help!

My coolpad Note 3 completely dead after flashing a stock Rom using SP Tool (formate all +Download). when i connect to charger nothing happens but if I connect mobile to PC preloader vcom driver appears and flashing file always successful. I tried switching battery as well but nothing seems to work.
Model: 8676 I02
S/W ver : v5.1-024
H/W ver : P1
Rom I flashed : 8676_I02_5.1-V34

Categories

Resources