I got my phone bricked,i'm trying to flash it with sp flash tools,but during process of removing cable and inserting it back sp flash tools does not detect my phone but the computer does as there is a pop sound,please help me
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
jamegreat said:
hey guys
after flashing wrong preloader my phone do not boot, do not charge and do not show any sign.... I have a back up but I can't flash it again... sp tool do not detect it...
how can I get into meta mode for my phone??
and what should I do to fix it?
Click to expand...
Click to collapse
Just flash stock firmware with Sp-flashtools Download
1- Install mt65xx adb drivers
2- Connect your device to your pc
3- Load scatter file and click download in sp-flashtools
4- Remove battery then insert it again
Wait until it's done and turn in your phone (the first boot will be slow 2-5 min)
preloader
hi
i have same phone . lenovo a319 d ram fail error . please share ur backup or preloader with me:crying. please:crying:
Same here. I flashed with that ROM what was in 2 comments before, and now my phone is dead. Every time I've got this BROM error.
soft bircked & YGDP not working a311
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
@bhavincb check this thread for flashable stock rom for a311 via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
Do you have custom recovery? If yes then follow Bhushan1985's post
if having stock recovery then download latest ygdp tool and while flashing (ENTERING DOWNLOAD MODE) connect your phone WITHOUT BATTERY.
Hope it will help!
---------- Post added at 08:59 AM ---------- Previous post was at 08:57 AM ----------
Check this link for step to step instruction for flashing stock rom with ygdp
when flashing micromax nitro a311 usig ygdp tool it stuck on 80%
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
u need to install & upgrade the drivers
khan_frd2002 said:
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
i also have same problem sir........
k2ajeet said:
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
Click to expand...
Click to collapse
my download stop at 83% and cpb download failed..............................
please help me as possible as.
sp tool also not working it shows brom error 2035
how to update drivers
lokesh314 said:
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
Click to expand...
Click to collapse
i am facing the same problem, i dont know how to update driver, i tried to update from windows update, it says you got the the latest drivers, can you provide me the link/ files for micromaxa311 driver by which my mobile can get detected by sp flash tool (ygdp too)
Same issuew
bhavincb said:
please help me.. I soft bricked my nitro a311 & try to flash stock rom with the help of ygdp.. But it is stucking at "enetering download mode"..
Please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
same issue kya karu bhai
Just FYI: I have a Coolpad F1 (which is the same hardware as the A310). I tried a bunch of ROM's incl. the 7.1.2 Lineage one, but non worked with Pokemon Go (it's my daughters "gaming phone"). So I tried the Micromax stock ROM - and Pokeman Go works. It's a terrible 4.4 ROM with a lot of trash programs built in, so really not worth considering - but Pokeman Go works..
My phone has TWRP 2.8.x installed, but I flashed it with fastboot (only boot & system), which I extracted from the stock cpb-file (4.4.031.P0.141015.8297W_I01.CPB). No need to use ygdp at all - besides using it to split the cpb-file into the flashable images. Wipe data, dalvik and cache in TWRP and then flash with fastboot the boot.img and system.img. I had some problem flashing the system.img, it worked with first formatting it and then flash with "fastboot flash -u system.img".
First install coolpad driver . because ygdp coolpad software.
Then use sp tool and flash
But sptool give error,that time you go to device manager and uninstall the driver,after uninstall coolpad driver automatically taken.and then ygdp detect your device and start flashing.
Don't use battery .
100% successful
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
Me to in the problem
i flash stock rom lolipop on my micromax aq4501 successfuly using sp flash tool latest..flashed official rom..after that phone is not turning on or shows charging animation...but phone can be detected by sp flash tool...what will i do nex..please help me
Broo....heating flash ic then reloaded the sw
I bricked my phone and it is not getting started. I have tried all the possible way explained in different forums but no luck. I have downloaded the stock rom and tried to flash using YGP tool. But my device is not getting detected by windows properly. It will get connected for a 2 seconds and will get disconnected. While getting connected I can see the mediatek device in the port (device manager) and it goes off on disconnection. I there any other way to flash the rom than YGP tool. Is it possible to get SP flash tool rom for A109.. Please help
Experts please help me. My phone is detecting SP Flash tool. So please help me to get the sp flash tool rom