When I press VOL UP+Power the phone vibrates 3 times but I cannot get it into flashmode.
I'm trying testpoint main. On a Windows machine I only see following device when connecting via USB : SMC Flash devices
My current trying S1tool repair boot. but do not have the file boot SGP561.
I'm looking for examples file C6903 (14_2_A_0_290.APP_SW_Honami_GENERIC_1272_6084_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET)
Apply file for SGP561.
help please file MMC.SIN_FILE_SET.
Sr language for i'm from Vietnam...Hihi
http://forum.xda-developers.com/xperia-z2-tablet/help/z2-sgp561-unbrick-help-please-t
http://forum.xda-developers.com/xperia-z2-tablet/help/z2-sgp561-unbrick-help-please-t3343883
Try Flashtool. Also make sure your device is plugged into your computer through USB before doing the Vol Up.
If you can get it connected to flash tool use this file.
https://www.dropbox.com/s/vuadrd234on6fvr/SGP561_23.4.B.0.319_Verizon.ftf?dl=0
Related
HI!
I from russia)
HTC don't power on, in the boot mode activesync don't conect to him(((
helpme!
flash a new rom with bootloader screen without activesync
Thanks, but how to me to make it?
Prompt me please!
I shall be very grateful!
download this rom: http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
Then put your smartphone in bootloader
press (volume down button + photo button ) and then power button for 2 second
when appear a screen color red - green - blue connect usb and install rom downloaded from pc
excuse me for my english
Gives out (260 error)...
Active Sync thus was switched - off, mtty writes that can not open usb port (((
Help!
dont install with Mytt.
you must only enter in bootloader
connect usb to phone and to pc
(activesync NO active)
and install new ROM from exe downloaded.
try
Tried, it deduces error 260, and mytt I tried to connect already then, but unsuccessfully....
RESET pc and phone.
and try
you enter to boot loader?
reset made) some times, boot loader is included
But connection does not occur.
uuuhhmmm!!!
change USB PC port!!
i try with my oxy and work
I made all described above on 4 different PC result everywhere identical...
change USB PC port!!
i try with my oxy and work
Explain!
I have ugual problem, but i have flash in bootloader screen, without mytt, only connecting usb port and double clic to exe rom downloaded.
XperiaU have a modified kernel with android 2.3.7, want to know if I upgrade to ICS by Sony's PC Companion can cause a problem for the modified kernel. (root)
If you use a modified kernel, then you have an unlocked bootloader so you cant use Sony PC Companion! Get Flashtool and the FTF instead Its a lot faster and simpler in my opinion
If you have any doubts on howto proceed, reply here or message me
Cheers
Min3r said:
If you use a modified kernel, then you have an unlocked bootloader so you cant use Sony PC Companion! Get Flashtool and the FTF instead Its a lot faster and simpler in my opinion
If you have any doubts on howto proceed, reply here or message me
Cheers
Click to expand...
Click to collapse
already heard about using FlashTool if you know of any link that teaches this would be grateful if you showed. but if I tried using the PC companio what would happen?
Found this on AndroidSoul Blog and modified for relevance :
1) Now copy the “.ftf” firmware file that you downloaded for your phone, and paste it inside the “firmwares” folder.
2) Double click the “FlashTool.exe” file.
3) Once the program opens — click on the “Flash” button. Its the Lightning button on top left
4) You’ll see the firmware that you copied loaded on the screen — click “Ok”!
Now it should ask you to connect your phone to the PC. So first plug the USB cable to PC, then pick up your phone and hold the “Volume Down” key and then connect the USB cable to your phone. Remember you’ve to hold the “Volume Down” key while connecting the USB cable to phone.
Once the phone gets connected — Flashtool will automatically start the flashing process.
Keep an eye on the Flashtool’s screen.
And once the process gets finished, disconnect your phone from PC and switch it ON.
Don’t freak if it takes longer to boot (that’s normal) as the phone has to build the cache again after flashing.
That will get you started And Sony PC Companion will give an error saying modified software if you try to flash on device with unlocked bootloader
ps : Since you are flashing a rom, use Flashmode and not fastboot when asked
Min3r said:
Found this on AndroidSoul Blog and modified for relevance :
1) Now copy the “.ftf” firmware file that you downloaded for your phone, and paste it inside the “firmwares” folder.
2) Double click the “FlashTool.exe” file.
3) Once the program opens — click on the “Flash” button. Its the Lightning button on top left
4) You’ll see the firmware that you copied loaded on the screen — click “Ok”!
Now it should ask you to connect your phone to the PC. So first plug the USB cable to PC, then pick up your phone and hold the “Volume Down” key and then connect the USB cable to your phone. Remember you’ve to hold the “Volume Down” key while connecting the USB cable to phone.
Once the phone gets connected — Flashtool will automatically start the flashing process.
Keep an eye on the Flashtool’s screen.
And once the process gets finished, disconnect your phone from PC and switch it ON.
Don’t freak if it takes longer to boot (that’s normal) as the phone has to build the cache again after flashing.
That will get you started And Sony PC Companion will give an error saying modified software if you try to flash on device with unlocked bootloader
ps : Since you are flashing a rom, use Flashmode and not fastboot when asked
Click to expand...
Click to collapse
Thank you. I'll test
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
RevolverForce said:
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
Click to expand...
Click to collapse
Flashmode is not Power button + Volume up. But...
Connect USB to ur computer
Then Hold the Volume Down key on your phone while u connect the USB Cable to the phone.
If you successfully get to flashmode, then u can flash an FTF file for ur phone. (This will also wipe internal sd files if you don't untick 'data' under wipes) Then again, phone might not boot properly if you don't wipe as u said something about custom ROM.
OR Follow these steps I found on Sony website
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
RevolverForce said:
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
Click to expand...
Click to collapse
I'm sure 50% is enough to install through PC Companion unless ur battery is bad.
And do you by anymeans use windows 8? If you do, Did you disable driver signature while installing Flashmode, Fastboot and Z2 drivers from the C:\Flashtool\drivers folder, or where ever u installed flashtool to.
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
RevolverForce said:
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
Click to expand...
Click to collapse
There's no keeping that Bad Boy down! Cheers mate!
z2 d6502 dead after flash D6502_Customized MAA_1291-4675_23.1.A.0.726_R3C.ftf
the phone with usb cable only driver QHSUSB__BULK
with tp in photo phone no answer
pleas how to add emergency mode other this test point
i have setool
all this testpoint not working pleas need other tp
plz how to add phone to emergency mode
You have any solution? ANy updates? my xperia z2 has dead, not fastboot. not flash mode, nothing. Please Help me
hard brick
I've been using a flashtool64 several times to revive a completely dead phone,press and hold volume - and connect USB cable.drivers must have installed on PC recognized tel.
Download and flash ftf. file with flashtool
i can't flash firmware using flashtool.
i've installed all the necessary drivers & software. when i plug the usb cable with holding down the vol - button flashtool not detect the phone.
( pc detect phone in fastboot mode. i've unlocked the bootloader )
any idea for fix this pls....
raththaran said:
i can't flash firmware using flashtool.
i've installed all the necessary drivers & software. when i plug the usb cable with holding down the vol - button flashtool not detect the phone.
( pc detect phone in fastboot mode. i've unlocked the bootloader )
any idea for fix this pls....
Click to expand...
Click to collapse
You are entering to fastboot mode not flashmode. Hold vol+ and connect, it will detect ur phone.
Adopt SD
I just updated to Marshmallow today and tried to adopt SD
but there isn't any option to "format as Internal Storage"
i can only format as Portable Storage and when i try to change used storage of an app to SD it says "Not enough storage space."
is this even possible?
Edit: sorry i supposed to post it in http://forum.xda-developers.com/xperia-z2/general/official-marshmallow-6-0-1-xperia-z2-t3354953/
my bad
Bruce666 said:
You are entering to fastboot mode not flashmode. Hold vol+ and connect, it will detect ur phone.
Click to expand...
Click to collapse
that's not working........still can't flash