Hello guys, I got problem with my K900, when I trying to flashing with MFT it shows me this message at 6%
"03/28/16 10:32:13.962 ERROR : Port 0/0/3 #0: IFW flash failed - SN : 447879A8E431D8C8"
The phone do not turn on at all but PC recognize it.
Same here but mine always stopped at 66% on flashing radio.firmware then Flash failed in red letters.
Related
Hello friends this is my first thread (sorry for my english)
I want to install Stock rom for my Mt6572 phone (android 4.2 - 4gb - 512 ram - POSH Pegasus 3g ).
I have a Stock ROM and sp flash tool and the computer (sp flash tools ) recogn the phone as Mediatek preload USB.
When i try to DOWNLOAD , appears BROM DRAM FAILED 4032
When i tray to FORMAT ALL + FLASH ---> BROM DRAM FAILED 4032
When i try to TEST RAM ---> BROM DRAM FAILED 4032
Finally when I connect another phone (i have 3 POSH Pegasus 3g phones ) then NO ERROR, all OK.
I think that the problem is the phone, and Not SPFlashTool or STOCK ROM
I think that is a NAND corrupt or EMMC corrupt, that stop de DOWNLOAD and appear BROM DRAM FAILED warning
If any can help me to repair this problem for Download the ROM. I apreciate your help. Thanks
Stucked in Boot logo in MT6572 device.
Getting BROM error 3149 while flashing.
No nand flash detected. Unable to flash nvram.bin, occurs PMT Error while flashing.
Unknown EMMC partition .
Tried all the modes in SP flash tool i.e, Format, firmware upgrade, download etc everything.. Also tried other flash tools.
Cant write IMEI again. Total device formatted with bootloader.
Not able to acquire Root shell through MTK Droid Tools. Flashing Custom roms giving Symlinks error.
Still detecting by pc and MTK droid tools.
I have all the backup of original firmware.
Any help would be really appreciated..
error 4032 means preloader not match
Hello friends, my phone micromax A116 (canvas HD) got softbricked after i did format+download in SP Flash tool....now my phone is totally dead, not charging. It is only getting detected in flash tool first the red bar and then purple bar(preloader) after that I am getting error "BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069)" in download mode. In firmware upgrade mode, I am getting error "_NODL_PRO_INFO: Failed to get PMT info". Could anyone please help please??
I think I need NVRAM file for my phone i.e. micromax a116 canvas hd. Can anyone provide me the NVRAM file for this model please?
Hi,
I'm trying to unbrick my HTC 526g using SP Flash Tools but after I hit download and connect my phone it gives me this error message, "BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004)", the phone also automatically displays the HTC logo.
Pleeeeaaasseee help, I have been trying to solve this for days
i trying to flash my (MT6582) android device with SP flash tool
PROBLEM: when i press download and connect the device to pc nothing happens , but after 10 seconds when i unplug the device i got this message : BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2006)
(BROM) can not pass bootrom start command! possibly target power up too early.
I am using Huawei G 730 U 10. Somehow, I bricked my phone. Luckily, I have factory rom, but I get following Error during flashing:
When Download via Flash tool :
(Check all and flash get – brom error s_da_sdmmc_write_failed (3149)
When Download via Flash tool (Separately one by one):
PRELOADER SUCCESS
MBR SUCCESS
EBR1 SUCCESS
UBOOT FAILED (Got Error of brom error s_da_sdmmc_write_failed (3149)
BOOTIMG SUCCESS
RECOVERY SUCCESS
SEC_RO SUCCESS
LOGO FAILED (Got Error of brom error s_da_sdmmc_write_failed (3149)
EBR2 SUCCESS
ANDROID SUCCESS
CACHE SUCCESS
USRDATA SUCCESS
I used latest sp flash tool v 5 and v 3.
Now, phone is not booting, nor charging.
Therefore, i just want to know, is my Mother Board / Flash Memory is Broken. On the other hand, is there any way to fix it?
What should I do now?