I am using Huawei G 730 U 10. Somehow, I bricked my phone. Luckily, I have factory rom, but I get following Error during flashing:
When Download via Flash tool :
(Check all and flash get – brom error s_da_sdmmc_write_failed (3149)
When Download via Flash tool (Separately one by one):
PRELOADER SUCCESS
MBR SUCCESS
EBR1 SUCCESS
UBOOT FAILED (Got Error of brom error s_da_sdmmc_write_failed (3149)
BOOTIMG SUCCESS
RECOVERY SUCCESS
SEC_RO SUCCESS
LOGO FAILED (Got Error of brom error s_da_sdmmc_write_failed (3149)
EBR2 SUCCESS
ANDROID SUCCESS
CACHE SUCCESS
USRDATA SUCCESS
I used latest sp flash tool v 5 and v 3.
Now, phone is not booting, nor charging.
Therefore, i just want to know, is my Mother Board / Flash Memory is Broken. On the other hand, is there any way to fix it?
What should I do now?
Related
my phone not booting up, coz of deleted system app n files. so i decided to flash rom, while i was trying to flashing the rom with sp tool, following error was displayed:
BROM ERROR: S_DA_EMMC_FLASH_NOT_FOUND(3144) what is this????
i tried memory check tool there was showing EMMC was not detected.
any help.
Hello friends this is my first thread (sorry for my english)
I want to install Stock rom for my Mt6572 phone (android 4.2 - 4gb - 512 ram - POSH Pegasus 3g ).
I have a Stock ROM and sp flash tool and the computer (sp flash tools ) recogn the phone as Mediatek preload USB.
When i try to DOWNLOAD , appears BROM DRAM FAILED 4032
When i tray to FORMAT ALL + FLASH ---> BROM DRAM FAILED 4032
When i try to TEST RAM ---> BROM DRAM FAILED 4032
Finally when I connect another phone (i have 3 POSH Pegasus 3g phones ) then NO ERROR, all OK.
I think that the problem is the phone, and Not SPFlashTool or STOCK ROM
I think that is a NAND corrupt or EMMC corrupt, that stop de DOWNLOAD and appear BROM DRAM FAILED warning
If any can help me to repair this problem for Download the ROM. I apreciate your help. Thanks
Stucked in Boot logo in MT6572 device.
Getting BROM error 3149 while flashing.
No nand flash detected. Unable to flash nvram.bin, occurs PMT Error while flashing.
Unknown EMMC partition .
Tried all the modes in SP flash tool i.e, Format, firmware upgrade, download etc everything.. Also tried other flash tools.
Cant write IMEI again. Total device formatted with bootloader.
Not able to acquire Root shell through MTK Droid Tools. Flashing Custom roms giving Symlinks error.
Still detecting by pc and MTK droid tools.
I have all the backup of original firmware.
Any help would be really appreciated..
error 4032 means preloader not match
i trying to flash my (MT6582) android device with SP flash tool
PROBLEM: when i press download and connect the device to pc nothing happens , but after 10 seconds when i unplug the device i got this message : BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2006)
(BROM) can not pass bootrom start command! possibly target power up too early.
HI brothers, i have a problem with my gfive gpower 5, i tried to flash it with SP flash tool but it stoped in the middle, i tried to flash it one more but i couldnt, error of the SP FLASH TOOLS enable DRAM FAIL 4032
it seems a preloader problem, please i need another rom or the preloader of my rom.
So long story short , i flashed a ROM using mtk client and usbdk driver and now my device wont turn on , doesnt display corrupted rom or boot or anything like that , no fastboot no recovery and somehow i get the boot to boot into BROM mode , now problem is when i am injecting payload from mtk client using command " python mtk payload " the payload injection is done succesfully but problem comes when i execute the next command which is " python mtk_gui " it gets stuck on detecting phone 0x200000 and the mtk_gui menu just doesnt open it stays stuck there forever , in the command windows it says no preloader detected amd daxflash error. Any idea if anyone of you could help me with this one ?
Also drivers installed are OPPO mtk vcom 1668 driver and usbdk driver .
No idea how to use sp flash tool as there are no exact instructions for sp flash tools
I tried flashing many roms like govix and other roms but still the phones screen just stays black .
The Phone gets stuck on
Jumping to 0x200000 ok. in MTK GUI
in command console it says : No preloader given . Operation may fail due to no DRAM Setup .
Uploading Stage 2
DAXFlash
Error on sending data: DA hash mismatch
Error on booting to DA
Any help would be appreciated .
You should've flashed the TWRP through fastboot and then flash the ROM from there, I honestly don't know how you flashed it from MTK, but anyway...
Try using the live-distro which is on MTKClient's GitHub page; flash it into an USB and boot from it. Had no issues at all on it (mostly used the GUI version), compared to Windows.
Flash a version's stock firmware partitions (A.20 is overall the best), all of them except seccfg, persist, nvcfg, nvdata, nvram, protect1, protect2, which are device-specific partitions.
Here's Giovix's guide.