Hello friends this is my first thread (sorry for my english)
I want to install Stock rom for my Mt6572 phone (android 4.2 - 4gb - 512 ram - POSH Pegasus 3g ).
I have a Stock ROM and sp flash tool and the computer (sp flash tools ) recogn the phone as Mediatek preload USB.
When i try to DOWNLOAD , appears BROM DRAM FAILED 4032
When i tray to FORMAT ALL + FLASH ---> BROM DRAM FAILED 4032
When i try to TEST RAM ---> BROM DRAM FAILED 4032
Finally when I connect another phone (i have 3 POSH Pegasus 3g phones ) then NO ERROR, all OK.
I think that the problem is the phone, and Not SPFlashTool or STOCK ROM
I think that is a NAND corrupt or EMMC corrupt, that stop de DOWNLOAD and appear BROM DRAM FAILED warning
If any can help me to repair this problem for Download the ROM. I apreciate your help. Thanks
Stucked in Boot logo in MT6572 device.
Getting BROM error 3149 while flashing.
No nand flash detected. Unable to flash nvram.bin, occurs PMT Error while flashing.
Unknown EMMC partition .
Tried all the modes in SP flash tool i.e, Format, firmware upgrade, download etc everything.. Also tried other flash tools.
Cant write IMEI again. Total device formatted with bootloader.
Not able to acquire Root shell through MTK Droid Tools. Flashing Custom roms giving Symlinks error.
Still detecting by pc and MTK droid tools.
I have all the backup of original firmware.
Any help would be really appreciated..
error 4032 means preloader not match
Related
hi.I used SP Flash Tool to flash my phone with the wrong ROM and now its DEAD.It won't turn on.it won't charge and still PC detection as Mtk Usb Port.
I have another same device.i get backup of stock ROM with Mtk Droid Tool.(i know backup files work.recovery file with scatter flashed sucsesfully when i install cwm recovery on new device)
i can format whole flash with SPFT and get green circle.
then try to download,but this errors appeared.
with SP FLASH TOOL 3.1224.01 : S_DL_GET_SETTING_FAIL (5054)
with SP FLASH TOOL 3.1304.0.119 :S_DA_DRAM_NOT_SUPORT (3004)
i see this error too : booloader doesnt exist on nand flash.please download bootloader first!
i think its bootloader problem so maybe testpoint method works.problem is i dont know which one is TP and how can i use it.
cpu : mtk6517(6577)
ram:512
android :4.0.4
http://www.apanda.com.cn/a60t/
anyone.please help
my phone not booting up, coz of deleted system app n files. so i decided to flash rom, while i was trying to flashing the rom with sp tool, following error was displayed:
BROM ERROR: S_DA_EMMC_FLASH_NOT_FOUND(3144) what is this????
i tried memory check tool there was showing EMMC was not detected.
any help.
Hello guys, I have a HiSense U970 with the MT6589 chipset which got hard bricked a week ago. The phone is running a stock 4.2.1 JB and rooted. The problem is that whenever I try to flash anything using SP Flash Tool it shows this error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed
I am hopeful the phone isn't totally dead since it can be:
- Detected by the computer WITHOUT the battery while holding vol down
- In Device Manager, it would show MTK USB Port (ComX) under Ports when vol down is held.
This is what happens now:
- Charging does not do anything.
- Cannot boot into recovery
- Cannot be detected by MTK Droid Tools (but I think this app needs a powered up phone to be detected by its system)
- Cannot flash anything using SPFT v3.1320.0.174 and v5.1524.00
I have searched the internet for fixes and solutions but, everything that I have found leads to that error.
Here was what I had done before the problem arose.
- Installed Preloader driver
- Used the latest version of SPFT
- Formatted whole flash except bootloader as I cannot flash the cwm rom found here without formatting
- Flashed ONLY the recovery and then downloaded it.
Green circle appears and after that, it cannot boot anymore. Cannot charge. Cannot boot into recovery.
I have tried the following with no luck:
- Used SPFT v5.1524.00 and v3.1320.0.174
- Flashing only the preloader
- Flashing only the recovery
- Format whole flash
- Formatting whole flash except bootloader
- Format all + download (v5)
- Firmware upgrade + upgrade (v3)
- Using the write memory method for writing preloader
- Flashing stock preloader
- Doing a memory test
All of which goes to the error 4032.
I have also tried using different USB ports with the same results.
If it helps, I used the scatter file for MT6589 and not my own scatter file. Using my own scatter file does not do anything before I flashed the recovery rom so, I used the MT6589 scatter file instead. Also, my scatter file was different from the MT6589.
- This was the scatter file I used.
- And this is my log from MTK Droid Tools which hopefully contains the addresses for the scatter file (I accidentally replaced my own [yea i know, stupid me])
I also cannot find the same scatter file that I had created anywhere on the internet.
I am willing to supply you with anything as long as I have access to it (hoping I have the file/information you need:fingers-crossed.
I am hoping that you know or at least the very least, can guide me out of mine and others misery. Thank you. :fingers-crossed:
I am using Huawei G 730 U 10. Somehow, I bricked my phone. Luckily, I have factory rom, but I get following Error during flashing:
When Download via Flash tool :
(Check all and flash get – brom error s_da_sdmmc_write_failed (3149)
When Download via Flash tool (Separately one by one):
PRELOADER SUCCESS
MBR SUCCESS
EBR1 SUCCESS
UBOOT FAILED (Got Error of brom error s_da_sdmmc_write_failed (3149)
BOOTIMG SUCCESS
RECOVERY SUCCESS
SEC_RO SUCCESS
LOGO FAILED (Got Error of brom error s_da_sdmmc_write_failed (3149)
EBR2 SUCCESS
ANDROID SUCCESS
CACHE SUCCESS
USRDATA SUCCESS
I used latest sp flash tool v 5 and v 3.
Now, phone is not booting, nor charging.
Therefore, i just want to know, is my Mother Board / Flash Memory is Broken. On the other hand, is there any way to fix it?
What should I do now?
HI brothers, i have a problem with my gfive gpower 5, i tried to flash it with SP flash tool but it stoped in the middle, i tried to flash it one more but i couldnt, error of the SP FLASH TOOLS enable DRAM FAIL 4032
it seems a preloader problem, please i need another rom or the preloader of my rom.