Hi there,
Enjoy Marshmallow KDZ from LG servers:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW709EC552DSALH1B0043XN/VS99022A_06_0222.kdz
Al0n said:
Hi there,
Enjoy Marshmallow KDZ from LG servers:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW709EC552DSALH1B0043XN/VS99022A_06_0222.kdz
Click to expand...
Click to collapse
how to update?
the steps please
abudraih said:
how to update?
the steps please
Click to expand...
Click to collapse
Flash with lgup
Has anyone been able to locate a KDZ for the RS987? I'd like to try and flash this MM update to my RS987 but would like the original KDZ in case I brick it and need to revert back.
drewcam888 said:
Flash with lgup
Click to expand...
Click to collapse
thank you
did i lose my data when I upgrade?
abudraih said:
thank you
did i lose my data when I upgrade?
Click to expand...
Click to collapse
No you won't if you upgrade
Kickin' it on my VS990
Edde3d said:
No you won't if you upgrade
Kickin' it on my VS990
Click to expand...
Click to collapse
thanks again
so i i have to do is upgrading using LGUP and KZD file , and i will not lose any of my data and accounts, correct?
i will try now and let you know
abudraih said:
thanks again
so i i have to do is upgrading using LGUP and KZD file , and i will not lose any of my data and accounts, correct?
i will try now and let you know
Click to expand...
Click to collapse
No, upgrading won't make you lose anything. EVERYTHING will be the EXACT same as before. Even if you are using a different launcher.
ThisIsCheez said:
Has anyone been able to locate a KDZ for the RS987? I'd like to try and flash this MM update to my RS987 but would like the original KDZ in case I brick it and need to revert back.
Click to expand...
Click to collapse
PM me your IMEI and I'll post you the KDZ link
imucarmen said:
No, upgrading won't make you lose anything. EVERYTHING will be the EXACT same as before. Even if you are using a different launcher.
Click to expand...
Click to collapse
i am getting this msg "LGUP can't load the model[C\Progrem Files(x86)\LGElectoronics\LGUP\model\com"
any thoughts?
abudraih said:
i am getting this msg "LGUP can't load the model[C\Progrem Files(x86)\LGElectoronics\LGUP\model\com"
any thoughts?
Click to expand...
Click to collapse
Did you copy the model folder it extracted when you installed lgup?. It's looking for it in the location stated.
Kickin' it on my VS990
Edde3d said:
Did you copy the model folder it extracted when you installed lgup?. It's looking for it in the location stated.
Kickin' it on my VS990
Click to expand...
Click to collapse
could you please elaborate, when i extracted the LGUP compressed file, i got two files and one folder "common" inside the folder one file "LGUP_common.dll"
and in the path "C:\Program Files (x86)\LG Electronics\LGUP\model" i found two folder, but there is no "com" folder, what shall i do?
abudraih said:
could you please elaborate, when i extracted the LGUP compressed file, i got two files and one folder "common" inside the folder one file "LGUP_common.dll"
and in the path "C:\Program Files (x86)\LG Electronics\LGUP\model" i found two folder, but there is no "com" folder, what shall i do?
Click to expand...
Click to collapse
Copy the model folder it extracted and paste it with the other two folders. So there should be three folders when you are done.
Kickin' it on my VS990
abudraih said:
thank you
did i lose my data when I upgrade?
Click to expand...
Click to collapse
Not sure but you will loose root if you have it... Not worth it to me. Hopefully they will get this rooted. :good:
Edde3d said:
Copy the model folder it extracted and paste it with the other two folders. So there should be three folders when you are done.
Kickin' it on my VS990
Click to expand...
Click to collapse
many and millions thanks, now i have v10 with MM and didn't lose my data,
---------- Post added at 09:40 AM ---------- Previous post was at 09:40 AM ----------
kendive said:
Not sure but you will loose root if you have it... Not worth it to me. Hopefully they will get this rooted. :good:
Click to expand...
Click to collapse
i can confirm, you will not lose your data, only root (
abudraih said:
many and millions thanks, now i have v10 with MM and didn't lose my data,
---------- Post added at 09:40 AM ---------- Previous post was at 09:40 AM ----------
i can confirm, you will not lose your data, only root (
Click to expand...
Click to collapse
MM is not worth it to me either... I'll be sticking with rooted 5.1.1. Loving Root!
Has anyone tried downgrading back to 5.1.1?
I am having weird DPI issues with this update. It cuts off certain programs from seeing the full menu. Anyone else seeing the app labeling getting cut off?
Sent from my VS990 using XDA-Developers mobile app
iBowToAndroid said:
Has anyone tried downgrading back to 5.1.1?
Click to expand...
Click to collapse
Yes. Without success, in fact. Whenever I try to downgrade with LGUP it gives me an error around 9% saying "Tot anti-rollback version is smaller than version on device". I'm pretty sure it is impossible to downgrade. So for those of us who have upgraded; Need to wait for marshmallow to be rooted.
abudraih said:
many and millions thanks, now i have v10 with MM and didn't lose my data,
---------- Post added at 09:40 AM ---------- Previous post was at 09:40 AM ----------
i can confirm, you will not lose your data, only root (
Click to expand...
Click to collapse
You mean you upgraded your fone while rooted?
Related
Has anyone tried using send_command to flash the LAF partition to BOOT (for backup sakes.. Need to be able to revert), after backing up to sdcard obviously, then flashing TMOBILE LAF to LAF partition. Rebooting the device again to download, now fastboot and oem unlocking? I was able to get this working on my old G3, I just got stuck in fastboot due to lg not having an official unlock tool (now available). From there TWRP could be flashed, and then root! After flashing the stock boot of course!!
Seriously!? Nobody responded!???? Maybe post this in the G5 Q&A????
jjj551280jjj said:
Has anyone tried using send_command to flash the LAF partition to BOOT (for backup sakes.. Need to be able to revert), after backing up to sdcard obviously, then flashing TMOBILE LAF to LAF partition. Rebooting the device again to download, now fastboot and oem unlocking? I was able to get this working on my old G3, I just got stuck in fastboot due to lg not having an official unlock tool (now available). From there TWRP could be flashed, and then root! After flashing the stock boot of course!!
Click to expand...
Click to collapse
Sounds like, and I could be wrong...an idea! Anyone else know about the odds of this working!????
jreed3786 said:
Sounds like, and I could be wrong...an idea! Anyone else know about the odds of this working!????
Click to expand...
Click to collapse
Not as of yet.. I've been doing research and testing
I will totally try this- as soon as the factory images are released, I'm all for expirementation, but I can't take one that big for the team!
Still no root for the LG G5 H820 (AT&T) Marshmallow 6.0.1?
Jim Mitchell said:
Still no root for the LG G5 H820 (AT&T) Marshmallow 6.0.1?
Click to expand...
Click to collapse
No, and honestly I don't think there will be. AT&T has locked this device down, and I mean locked it down HARD. If AT&T will release a tot or kdz then maybe we could get root, as someone could just make a pre-rooted system of the tot or kdz (right, guys?) but until (or if) they release it, I don't think there will be root. I would be willing to test for some things if I knew I could just flash back to stock if things go wrong but right now I can't, so I'm not willing to test for anything as I don't have the money to just go purchase another device if this one bricks.
Root for G5 h820?
If this is usefull at all to find root for the at&t g5 h820 i have the system zip file directly from LG? And ill help in anyway i do some android hacking and exploiting...
Quinnshank said:
If this is usefull at all to find root for the at&t g5 h820 i have the system zip file directly from LG? And ill help in anyway i do some android hacking and exploiting...
Click to expand...
Click to collapse
Is the system zip file for the AT&T variant? Can you upload it to Mega or Google Drive or something, please?
thatkindaguy said:
Is the system zip file for the AT&T variant? Can you upload it to Mega or Google Drive or something, please?
Click to expand...
Click to collapse
Yeah i will do that asap and the device i used was registered at&t h820
Quinnshank said:
Yeah i will do that asap and the device i used was registered at&t h820
Click to expand...
Click to collapse
Cool thanks man hopefully this should help, once uploaded I'll look through the system zip as well and do some research and possibly some testing.
posting
so it says before i upload a file i have to post a couple times so im just gonna ramble...
Quinnshank said:
so it says before i upload a file i have to post a couple times so im just gonna ramble...
Click to expand...
Click to collapse
You can always send a private message
Quinnshank said:
so it says before i upload a file i have to post a couple times so im just gonna ramble...
Click to expand...
Click to collapse
Yeah man you can private message me the link if you want, I can post it here and give you credits
post
[/COLOR]finally here is the H820 zip file direct from LG let me know what i can do to help::: https://drive.google.com/open?id=0BxbSBlcTY8vfSkE4dnZ6U0E1Wnc
Quinnshank said:
[/COLOR]finally here is the H820 zip file direct from LG let me know what i can do to help::: https://drive.google.com/open?id=0BxbSBlcTY8vfSkE4dnZ6U0E1Wnc
Click to expand...
Click to collapse
ok, so what you have is the source code. it will come in handy if you wanna look at the way it's built.
---------- Post added at 12:11 PM ---------- Previous post was at 12:06 PM ----------
jjj551280jjj said:
Has anyone tried using send_command to flash the LAF partition to BOOT (for backup sakes.. Need to be able to revert), after backing up to sdcard obviously, then flashing TMOBILE LAF to LAF partition. Rebooting the device again to download, now fastboot and oem unlocking? I was able to get this working on my old G3, I just got stuck in fastboot due to lg not having an official unlock tool (now available). From there TWRP could be flashed, and then root! After flashing the stock boot of course!!
Click to expand...
Click to collapse
You are kind of on the right path, but there is no way to just "flash" the t-mobile LAF partition. There are too many security variables that you need to find a work-around for, along with trying to find a way to get it onto your device.
Another thing is that THE SEND_COMMAND DOES NOT WORK ON THE G5. This has been talked about on many other threads, and it doesn't work.
Why is the AT&T getting so little love compared to all other models !? We need root too
boksquare said:
Why is the AT&T getting so little love compared to all other models !? We need root too
Click to expand...
Click to collapse
Well the biggest issue is on top of AT&T locking the device down, they aren't releasing a kdz or tot file.
I've been out of the game for awhile, but aren't they obligated to due to open source?
Sent from my LG-H820 using Tapatalk
kyuubi08 said:
I've been out of the game for awhile, but aren't they obligated to due to open source?
Sent from my LG-H820 using Tapatalk
Click to expand...
Click to collapse
Yea that's what I was thinking. How can they be the only carrier that doesn't have to release the FW? They do the same thing on the AT&T S7 and S7E. Can they be sued for that?
Sent from my VK815 using XDA-Developers mobile app
Looking for a way to get back to 11c or 11d on your rs988 go here https://forum.xda-developers.com/lg-g5/development/stock-rs988-11c-rom-flashable-zips-imgs-t3612358 all thanks and credit go to @autoprime
RS988 nougat
firenemesis7 said:
Can anyone that has the official nougat rs98821a installed on their phones please private message me their IMEI so i can download the official kdz and get it uploaded for everyone on the site. thank you
Click to expand...
Click to collapse
I have the nougat on my LG G5. Is this guaranteed to work though? I'm ready to help
GuyKhaled said:
I have the nougat on my LG G5. Is this guaranteed to work though? I'm ready to help
Click to expand...
Click to collapse
Please do. Some of us downloaded the Nougat file that was listed on lg-firmwares.com, but now we don't have LTE because it turns out is was for a carrier called Brightpoint. Our only hope to to download the full RS98821a KDZ file and see if it will flash on the phone.
No this idea did not work out
GuyKhaled said:
I have the nougat on my LG G5. Is this guaranteed to work though? I'm ready to help
Click to expand...
Click to collapse
firenemesis7 said:
Yes this is guaranteed to work all i need is an imei with nougat to get the kdz file from lgs website.
[]
Click to expand...
Click to collapse
Hopefully someone will be willing to help us out.
If you have a Reddit account, maybe ask there, or on Android Central Forum?
firenemesis7 said:
Yes this is guaranteed to work all i need is an imei with nougat to get the kdz file from lgs website
Click to expand...
Click to collapse
Why not just let us know how to do it rather than submitting an IMEI number to you?
---------- Post added at 03:24 PM ---------- Previous post was at 03:19 PM ----------
FAUguy said:
Please do. Some of us downloaded the Nougat file that was listed on lg-firmwares.com, but now we don't have LTE because it turns out is was for a carrier called Brightpoint. Our only hope to to download the full RS98821a KDZ file and see if it will flash on the phone.
Click to expand...
Click to collapse
You could instead download RS98811c_00_ARB01.kdz from the site (it's not the BPT version) and go through two updates to get to Nougat.
Virus-D said:
Why not just let us know how to do it rather than submitting an IMEI number to you?
---------- Post added at 03:24 PM ---------- Previous post was at 03:19 PM ----------
please use the following url to check the firmware version for your phone. Please replace <your imei number> with your imei number
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<your imei number>
You will get a xml response in the browser as shown below
<sw_version>RS98811C_00</sw_version>
<sw_url>
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5BW136527TAGUF35AB66M/RS98811c_00_ARB01.kdz
</sw_url>
<sw_locale_url/>
We need the url under the tag sw_url to download the nougat kdz. If you could help us out, it would be really great. Thanks
Since we already installed the BPT Nougat KDZ, its not letting us to downgrade to RS98811c_00_ARB01.kdz (marshmallow)
Click to expand...
Click to collapse
The return is the same RS98811c_00_ARB01.kdz file; not even the 11d update.
That is all I keep getting is the rs98811c version no matter what imei I try maybe it will take sometime for lg to update their servers
firenemesis7 said:
That is all I keep getting is the rs98811c version no matter what imei I try maybe it will take sometime for lg to update their servers
Click to expand...
Click to collapse
Someone over on Android Central said they posted the RS98821a update file (1.3GB). I downloaded it, but it is a .bin file, so not sure if it would be worth trying using LG UP, since my phone right now has the 10h (Brightpoint).
https://we.tl/aTgpHJkcf5
FAUguy said:
Someone over on Android Central said they posted the RS98821a update file (1.3GB). I downloaded it, but it is a .bin file, so not sure if it would be worth trying using LG UP, since my phone right now has the 10h (Brightpoint).
https://we.tl/aTgpHJkcf5
Click to expand...
Click to collapse
Yeah, I posted that. It was an OTA file. I'm not sure how you could use it in LGUP, but if I had to guess, it would be through the upgrade/update option. I would assume one would also have to already be on 11d.
firenemesis7 said:
That is all I keep getting is the rs98811c version no matter what imei I try maybe it will take sometime for lg to update their servers
Click to expand...
Click to collapse
Yeah, until LG updates their servers with the 21a version, it won't show on website no matter what IMEI from an RS988. Either have to wait for LG to update website or someone to post correct kdz file to use.
also getting 11c here and i am on 11d.
I think the only way to get the kdz would be if you were on the 11d and upgraded through the lg computer software
firenemesis7 said:
I think the only way to get the kdz would be if you were on the 11d and upgraded through the lg computer software
Click to expand...
Click to collapse
I tried that. It would always say that no update was available. The only update available was the OTA that I could only get from my phone directly.
Virus-D said:
Why not just let us know how to do it rather than submitting an IMEI number to you?
---------- Post added at 03:24 PM ---------- Previous post was at 03:19 PM ----------
You could instead download RS98811c_00_ARB01.kdz from the site (it's not the BPT version) and go through two updates to get to Nougat.
Click to expand...
Click to collapse
I have the 11c KDZ file, but can't get LG UP to flash it (fales at 10%), because it is detecting that Nougat is installed and wont allow a flash to Marshmallow.
FAUguy said:
I have the 11c KDZ file, but can't get LG UP to flash it (fales at 10%), because it is detecting that Nougat is installed and wont allow a flash to Marshmallow.
Click to expand...
Click to collapse
If you're on BPT's 10h, have you tried going to BPT's 10d and THEN going 11c to get off BPT?
Also, you tried it in firmware update mode, correct? Powered off and unplugged > hold volume up button > plug in USB > wait.
Virus-D said:
If you're on BPT's 10h, have you tried going to BPT's 10d and THEN going 11c to get off BPT?
Also, you tried it in firmware update mode, correct? Powered off and unplugged > hold volume up button > plug in USB > wait.
Click to expand...
Click to collapse
Yes, I tried that as well. Still won't flash.
Virus-D said:
Yeah, I posted that. It was an OTA file. I'm not sure how you could use it in LGUP, but if I had to guess, it would be through the upgrade/update option. I would assume one would also have to already be on 11d.
Click to expand...
Click to collapse
I tried tonight, and the LG UP program can't read .bin files. I even tried to rename it as a .zip just to see what would happen, and still can't read it.
So a week later and LG hasn't posted the 21a link yet on their check esn page. I wonder how long this will take. If the KDZ isn't up in a couple weeks, I guess I'll have to contact LG and see about sending my phone in. Maybe they have a way to get it back to 11c or 11d so that the 21a will download and install.
- AP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT_meta.tar
- BL_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CSC_ATT_G930AATT4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
Yep, muniz_ri came through again! Thanks...
Switching between AT&T and U firmware more often than using the phone LOL. It would really suck without full firmware!
is this an official firmware? do i need an official odin?
yes and yes
ok thank you!
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
one last question. it doesn't matter on what firmware i was before right?
davidmclaren said:
ok thank you!
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
one last question. it doesn't matter on what firmware i was before right?
Click to expand...
Click to collapse
Correct
I have tried to use Odin (3.12.3 and 3.12.17) to flash fhese .tar files; however, Odin does not see any files in the folder. Yesterday, I was able to flash an older version of Nougat with a .tar.md5 filename just fine. But it does not see the .tar files at all.
Any help would be greatly appreciated.
buddesc said:
I have tried to use Odin (3.12.3 and 3.12.17) to flash fhese .tar files; however, Odin does not see any files in the folder. Yesterday, I was able to flash an older version of Nougat with a .tar.md5 filename just fine. But it does not see the .tar files at all.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Did you extract the files once you downloaded them?
You have to extract the files.
dirtydodge said:
Did you extract the files once you downloaded them?
Click to expand...
Click to collapse
No. I did not. Thank you.
muniz_ri said:
- AP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT_meta.tar
- BL_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CSC_ATT_G930AATT4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
Are these to flash from G935A to Unlocked variant? Also what android version are they?
photobumm said:
Are these to flash from G935A to Unlocked variant? Also what android version are they?
Click to expand...
Click to collapse
This doesn't unlock anything. Did you look at the file name to see what "version" they are. Kinda is spelled out in the first 13 or so letters and numbers. Also, these files are for the S7 flat
dirtydodge said:
This doesn't unlock anything. Did you look at the file name to see what "version" they are. Kinda is spelled out in the first 13 or so letters and numbers. Also, these files are for the S7 flat
Click to expand...
Click to collapse
First comment mentioned "Switching between AT&T and U firmware" so I figured these files had something to do with that switch.
photobumm said:
First comment mentioned "Switching between AT&T and U firmware" so I figured these files had something to do with that switch.
Click to expand...
Click to collapse
Oh OK. I see where that could be confusing, there meaning the Muniz is working on both, this firmware and the U firmware.
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
I am not sure.
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
I think it will, qd4 is latest stock unrooted.
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
If you mean sim unlock, the answer is no. Flashing firmware does not lock an unlocked device.
Has anyone tried to root this yet
For those who have used this and 7.0 U firmware, which do they find faster and more stable?
I found them to perform identically.
I own a Chinese AL00 Honor 9,B201 is so poor,so I am intending to downgrade to B136,or B155.However in FF the lowest version I can find for my phone is B190:crying:
I verified the B136 for AL10 with IMEI,miraculously it passed,saying the firmware I will install is AL00C00B136.But when I finish the DNS changing I found I still only can get AL10C00B136.
Any idea on this issue is appreciated
Check here:
https://forum.xda-developers.com/honor-9/development/honor-9-stock-rom-b136-root-built-china-t3632616
https://forum.xda-developers.com/honor-9/development/honor-9-stock-rom-b155-root-built-china-t3637120
kac222 said:
Check here:
https://forum.xda-developers.com/ho...or-9-stock-rom-b136-root-built-china-t3632616
https://forum.xda-developers.com/ho...or-9-stock-rom-b155-root-built-china-t3637120
Click to expand...
Click to collapse
Thanks so much!One question,will my bl be unlocked and lose my warranty?
Sent from my Huawei Honor 9 using XDA Labs
I handed over to the service in Poland with unlkock bootloader and there was no problem.
It depends on the service.
Normally your warranty is woid now.
How about download via FF and flash in the 3-button-mode?
Sent from my Huawei Honor 9 using XDA Labs
hujialun2002 said:
How about download via FF and flash in the 3-button-mode?
Sent from my Huawei Honor 9 using XDA Labs
Click to expand...
Click to collapse
Hi! what is the difference between B201 and B136 or B155?
BTW, I had AL00C00B201 flashed to L09C432B130, but it is very poor compared to AL00C00B201.
Now I want to go back to AL00C00B201 but I dont know how to do it...
oblivion2222 said:
Hi! what is the difference between B201 and B136 or B155?
BTW, I had AL00C00B201 flashed to L09C432B130, but it is very poor compared to AL00C00B201.
Now I want to go back to AL00C00B201 but I dont know how to do it...
Click to expand...
Click to collapse
Perhaps you need the HWOTA Rebrand method to AL00,I guess.Maybe you can use the B123 Service Repair Firmware but I AM NOT SURE
For the differences,they say that B201 underclock the CPU for better battery usage(ironically I didn't feel any improvement),but B123 and B136 aren't.I don't know about B155.So if you are a heavy gamer B201 may be a nightmare What's more B201 is in conflict with several Apps so they will evaporate into thin air after reboot...
Do notice that package for AL00 and AL10 are exactly the same.And the model number will be unchanged even flashing the AL10 firmware.I tested myself downgrading.And don't forget to wipe data.
hujialun2002 said:
Perhaps you need the HWOTA Rebrand method to AL00,I guess.Maybe you can use the B123 Service Repair Firmware but I AM NOT SURE
For the differences,they say that B201 underclock the CPU for better battery usage(ironically I didn't feel any improvement),but B123 and B136 aren't.I don't know about B155.So if you are a heavy gamer B201 may be a nightmare What's more B201 is in conflict with several Apps so they will evaporate into thin air after reboot...
Do notice that package for AL00 and AL10 are exactly the same.And the model number will be unchanged even flashing the AL10 firmware.I tested myself downgrading.And don't forget to wipe data.
Click to expand...
Click to collapse
how about the app bundles?
because there are many more apps on c00b201 than on c432b130...
oblivion2222 said:
how about the app bundles?
because there are many more apps on c00b201 than on c432b130...
Click to expand...
Click to collapse
Are you referring to the Chinese Apps?Well,they are no harm,and you can always uninstall them allI uninstalled right after turning on the phone
hujialun2002 said:
Are you referring to the Chinese Apps?Well,they are no harm,and you can always uninstall them allI uninstalled right after turning on the phone
Click to expand...
Click to collapse
Are you still on b201?
I am looking for a AL00C00B01 firmware etc. and you would help a lot if you can send it to me...
oblivion2222 said:
Are you still on b201?
Click to expand...
Click to collapse
Nope.Im on .341:laugh:Isn't it available on FF?
hujialun2002 said:
Nope.Im on .341:laugh:Isn't it available on FF?
Click to expand...
Click to collapse
Do you know a way to rebrand and downgrade to b201?
All the tutorials I found are for rebranding into EU phones and I want to come back to CN
oblivion2222 said:
Do you know a way to rebrand and downgrade to b201?
All the tutorials I found are for rebranding into EU phones and I want to come back to CN
Click to expand...
Click to collapse
If my mind is working properly,When it comes to select OEMinfo you can select to Rebrand to C00.All left to do should be replacing the EU Firmware with CN ones(can be downloaded on FF).I didn't try it so can't promise it's working
hujialun2002 said:
If my mind is working properly,When it comes to select OEMinfo you can select to Rebrand to C00.All left to do should be replacing the EU Firmware with CN ones(can be downloaded on FF).I didn't try it so can't promise it's working
Click to expand...
Click to collapse
I'm trying to do that for 5 hours now but it doesnt work
I tried to rebrand to AL00C00 first but after reboot, it is still L09C432
---------- Post added at 06:47 PM ---------- Previous post was at 06:43 PM ----------
the oeminfo file is copied onto the sdcard, but after that it says:
dd: /storage/sdcard1/oeminfo: no such files or directory
oblivion2222 said:
I'm trying to do that for 5 hours now but it doesnt work
I tried to rebrand to AL00C00 first but after reboot, it is still L09C432
---------- Post added at 06:47 PM ---------- Previous post was at 06:43 PM ----------
the oeminfo file is copied onto the sdcard, but after that it says:
dd: /storage/sdcard1/oeminfo: no such files or directory
Click to expand...
Click to collapse
Sorry for the late reply,it was 2:30 am that time here
People experience problems but that is about"tmp/oeminfo",not your problem...
I remember seeing a post about flashing it manually in terminal but can't find it now...
hujialun2002 said:
Sorry for the late reply,it was 2:30 am that time here
People experience problems but that is about"tmp/oeminfo",not your problem...
I remember seeing a post about flashing it manually in terminal but can't find it now...
Click to expand...
Click to collapse
thanks for answering.
there was two missing lines in the script, i managed to fix it.
but i can find the rights files for b201 (update, update_all_hw, update_data_public).
i copied an incomplete file, so adb installed a recovery version. i updated it with dload but it did not succeed...
oblivion2222 said:
thanks for answering.
there was two missing lines in the script, i managed to fix it.
but i can find the rights files for b201 (update, update_all_hw, update_data_public).
i copied an incomplete file, so adb installed a recovery version. i updated it with dload but it did not succeed...
Click to expand...
Click to collapse
The B201 files is on FF with number"88860"or"88861".It is under model STFAL10C00.There are 3 files to be renamed after downloading.Then the firmware change should work technically.
oblivion2222 said:
thanks for answering.
there was two missing lines in the script, i managed to fix it.
but i can find the rights files for b201 (update, update_all_hw, update_data_public).
i copied an incomplete file, so adb installed a recovery version. i updated it with dload but it did not succeed...
Click to expand...
Click to collapse
http://cn.club.vmall.com/forum.php?mod=viewthread&tid=13656801
I know this is about capacitive button fix but it should be exactly what you want.It contained the service Repair Firmware and a oeminfo_tool batch file which seems able to write oeminfo to CN and flash stock rec.It is also easier to use the 3-button-combo.
[/COLOR]
hujialun2002 said:
http://cn.club.vmall.com/forum.php?mod=viewthread&tid=13656801
I know this is about capacitive button fix but it should be exactly what you want.It contained the service Repair Firmware and a oeminfo_tool batch file which seems able to write oeminfo to CN and flash stock rec.It is also easier to use the 3-button-combo.
Click to expand...
Click to collapse
Thanks!
however meanwhile, also looks like the oeminfo file I installed was not AL00C00 but AL10C00...
So i'm stuck once again as I need AL00C00 oeminfo and b201 full firmware...
I'll try your link!
oblivion2222 said:
[/COLOR]
Thanks!
however meanwhile, also looks like the oeminfo file I installed was not AL00C00 but AL10C00...
So i'm stuck once again as I need AL00C00 oeminfo and b201 full firmware...
I'll try your link!
Click to expand...
Click to collapse
It is not that important due to the fact that AL00 and AL10 can use the same firmwares.I tried this method before and the model number did change to AL10 but nothing gets wrong.That time I didn't fully complete the guide.Seeing inside the package are separate folders of AL00 and AL10 I guess If the installation is done properly the model might not get wrong
Good luck!
FOR A6+ (A605FN)
1-Unlock your OEM & activate USB debugging on Developers Options.
2-Restart on Dowload Mode & Flash the 4 firmware files with Odin.
3-Instal Magisk.apk & SuperUser will be working for delete bloatware,modify the system & install apps that require superuser permissions.
A605FNXXU2ARG2 - DOWNLOAD
Magisk Manager - DOWNLOAD
THANKS TO MAGISK FOR THE NEW ROOT METHOD WITHOUT RECOVERY
If I have helped you, invite me to a beer by clicking HERE.
Will safetynet check work?
DKzVeNgEnS said:
Will safetynet check work?
Click to expand...
Click to collapse
For now we have to choose between having root or pass the Safetynet.
Do not sew odin, mistake
kes228 said:
Do not sew odin, mistake
Click to expand...
Click to collapse
It is compressed in ZIP,
First you have to extract the 4 files.
It is also important not to rename the files.
josemaesra said:
It is compressed in ZIP,
First you have to extract the 4 files.
It is also important not to rename the files.
Click to expand...
Click to collapse
I pulled out 4 archives, I put one does not sew,On the body it says that the current is official, the bootloader is unlocked everywhere stand OFF http://prntscr.com/knd460
kes228 said:
I pulled out 4 archives, I put one does not sew,On the body it says that the current is official, the bootloader is unlocked everywhere stand OFF http://prntscr.com/knd460
Click to expand...
Click to collapse
Try with this ODIN,
& say me if working,please,
thanks.
josemaesra said:
Try with this ODIN,
& say me if working,please,
thanks.
Click to expand...
Click to collapse
Also does not sew ( http://prntscr.com/kndfnb
kes228 said:
Also does not sew ( http://prntscr.com/kndfnb
Click to expand...
Click to collapse
If possible, send me your official boot.img and I can patch it in 5min.
josemaesra said:
If possible, send me your official boot.img and I can patch it in 5min.
Click to expand...
Click to collapse
I will grateful to you https://drive.google.com/open?id=1lbou9k_VvraEwKMuyqn57bBg1kP4LxMc
kes228 said:
I will grateful to you https://drive.google.com/open?id=1lbou9k_VvraEwKMuyqn57bBg1kP4LxMc
Click to expand...
Click to collapse
This is you patchet boot.img - Download
[/COLOR]
josemaesra said:
This is you patchet boot.img - Download
Click to expand...
Click to collapse
Do not sew, nothing is written on the phone http://prntscr.com/kndrvh
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
josemaesra said:
This is you patchet boot.img - Download
Click to expand...
Click to collapse
Can I flash your firmware? with your region?
Here is my worth
http://cs5-3.4pda.to/13690992/Scree...Settings.jpg?c9a72894c1607654b646c19c7ce6be4e
kes228 said:
[/COLOR]
Do not sew, nothing is written on the phone http://prntscr.com/kndrvh
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
Can I flash your firmware? with your region?
Here is my worth
http://cs5-3.4pda.to/13690992/Scree...Settings.jpg?c9a72894c1607654b646c19c7ce6be4e
Click to expand...
Click to collapse
I do not know what that error is due to,
but the solution is to flash your official firmware and then flash your patched boot.img,
this patched boot.img can not return error since it is the one corresponding to your official firmware.
josemaesra said:
I do not know what that error is due to,
but the solution is to flash your official firmware and then flash your patched boot.img,
this patched boot.img can not return error since it is the one corresponding to your official firmware.
Click to expand...
Click to collapse
It is a pity that it does not work out
kes228 said:
It is a pity that it does not work out
Click to expand...
Click to collapse
I tried flashing your boot.img and I get `` device not supported '',
so the boot.img is different for each region and firmware.
What is your region? And firmware, I'll try)
kes228 said:
What is your region? And firmware, I'll try)
Click to expand...
Click to collapse
My firm is A605FNXXU2ARG2 and my region is PHE
josemaesra said:
My firm is A605FNXXU2ARG2 and my region is PHE
Click to expand...
Click to collapse
Thank you, and can your patched boot from your firmware if everything gets done, I'll sign you off
Guys, I need help! I got a demo unit a605x. On joys stitched through one official firmware for Russia. Everything went without errors, but when you restart and further installation does not give the modem and the inscription in English, they say, contact the operator. After reading the forum I can not understand what I did wrong? I understood that it was necessary to sew without a file of the CP (responsible for the modem)? And another point, does the process of firmware OEM option lock: on/off? Or he is affected with the unofficial firmware? I didn't change it, maybe that's the problem. What I just did not put the firmware, all by. Maybe there are bright heads here? Thanks in advance!
josemaesra said:
If possible, send me your official boot.img and I can patch it in 5min.
Click to expand...
Click to collapse
when @kes228 already failed, and then Odin patched given but still error, the date still 27. maybe his cellphone already in RMM prenormal condition..