Related
Hey all...
I previously ported CWM to my MT6572 device (i.e lava iris 402) using auto port tool for MTK phones . It ported , booted , i thought to make backup first , Then it made back up in just 10 sec , i thought something is going wrong . after that i rebooted the phone AND it was stuck on boot logo .
Tried to restore stock ROM via SP Flash tools but no luck , From day 1 it was not working in my phone , it shows error some thing like " layout has been changed"
Checked sd card on pc , saw the backup which recovery made was just of 10-20 MB
Nevertheless my phone was in warranty period so gave it to SVC , and have got it back ( Motherboard was changed , even those guys were not able to flash stock ROM)
In the mean time when i was phone less i unpacked the stock recovery.img , went to /etc/fstab file .. And saw that the partitions of /system , /cache and /data were ubifs instead of ext 2,3,4 or yaffs which are commonly used ...
Came to know that cwm does not support ubifs file system . This thing i think bricked my phone . Recovery which i ported was of MT6577 phone which had ext4 fs.
Now i want to know how can i port cwm to this cursed device ? Which uses an unknown ubifs file system . Bricked once earlier now i dont want to brick again ....
An ya idk why whenever i try to flash The phone via SP flash tools it always returns an error some thing like " PMT is ready , layout has been changed "
Any help is welcome guys ...!
Sent from my IRIS402 using xda app-developers app
Bump...!!
Sent from my IRIS402 using xda app-developers app
An ya idk why whenever i try to flash The phone via SP flash tools it always returns an error some thing like " PMT is ready , layout has been changed "
Any help is welcome guys ...!
Click to expand...
Click to collapse
Me too faced same problem. Copied the preloader from Sp flash to outside and it was OK with firmware upgrade. But this too didn't go well finally flashed stock ROM with new Sp flash and got back phone.
Flashed the cwm recovery of 3g rain mt6572 through mobile uncle tools but it was not functioning. Flashed the original recovery through the same tool and it is working.
Sent from my IRIS402 using xda app-developers app
you can try this block for cwm recovery mtk6572 (system 4,cache 5,data 6,sdcard 7),my device (s720c) using that but in stock recovery it so different (system 6,cache 2,data 3,sdcard 4),i don't know why but it work for me and here is cwm recovery i ported for my device,it work fine,hope it work for you :victory:
Flashed the cwm recovery, phone boot by normal mode only even if pressed volume+ and power.
Sent from my IRIS402 using xda app-developers app
mandeep1 said:
Hey all...
I previously ported CWM to my MT6572 device (i.e lava iris 402) using auto port tool for MTK phones . It ported , booted , i thought to make backup first , Then it made back up in just 10 sec , i thought something is going wrong . after that i rebooted the phone AND it was stuck on boot logo .
Tried to restore stock ROM via SP Flash tools but no luck , From day 1 it was not working in my phone , it shows error some thing like " layout has been changed"
Checked sd card on pc , saw the backup which recovery made was just of 10-20 MB
Nevertheless my phone was in warranty period so gave it to SVC , and have got it back ( Motherboard was changed , even those guys were not able to flash stock ROM)
In the mean time when i was phone less i unpacked the stock recovery.img , went to /etc/fstab file .. And saw that the partitions of /system , /cache and /data were ubifs instead of ext 2,3,4 or yaffs which are commonly used ...
Came to know that cwm does not support ubifs file system . This thing i think bricked my phone . Recovery which i ported was of MT6577 phone which had ext4 fs.
Now i want to know how can i port cwm to this cursed device ? Which uses an unknown ubifs file system . Bricked once earlier now i dont want to brick again ....
An ya idk why whenever i try to flash The phone via SP flash tools it always returns an error some thing like " PMT is ready , layout has been changed "
Any help is welcome guys ...!
Sent from my IRIS402 using xda app-developers app
Click to expand...
Click to collapse
hi bro
I'm Jimmy from Vietnam
I just ported success CWM Recovery for MTK6572 phones that support ubifs format
It's Carliv Touch CWM Recovery.
I will give you my CWM Recovery
You can port to your device now,
If you can't do it, pls contact to me: [email protected]
http://tenlua.vn/cwmbean402-rar-0e37e62fe9036801/#download0e37e62fe9036801
minhdangoz94 said:
hi bro
I'm Jimmy from Vietnam
I just ported success CWM Recovery for MTK6572 phones that support ubifs format
It's Carliv Touch CWM Recovery.
I will give you my CWM Recovery
You can port to your device now,
If you can't do it, pls contact to me: [email protected]
http://tenlua.vn/cwmbean402-rar-0e37e62fe9036801/#download0e37e62fe9036801
Click to expand...
Click to collapse
Hey my friend .. My mobile is G-Tide E77
MT-6572 ... Can your cwm work with me .. And how can I port it to my mobile
Napst3r88 said:
Hey my friend .. My mobile is G-Tide E77
MT-6572 ... Can your cwm work with me .. And how can I port it to my mobile
Click to expand...
Click to collapse
Well, pls send the stock recovery.img for me
I will port for you !
minhdangoz94 said:
Well, pls send the stock recovery.img for me
I will port for you !
Click to expand...
Click to collapse
Great sir .. Thank you ... I will backup my stock ROM using MTK Tools and extract stock recovery. img ... And upload it .... in short time
Sent from my G-TiDE E77 using XDA Premium 4 mobile app
minhdangoz94 said:
Well, pls send the stock recovery.img for me
I will port for you !
Click to expand...
Click to collapse
thanks in advance
http://www.datafilehost.com/d/bde231bf
BẠN CÓ THỂ PORT GIÚP TÔI 1 BẢN RECOVERY VỚI STOCK RECOVERY.IMG NÀY KHÔNG, PHIÊN BẢN STOCK CỦA TÔI QUÁ HẠN CHẾ VÈ TÍNH NĂNG, TÔI KHÔNG LÀM ĐƯỢC GÌ NHIEUF VỚI NÓ.:laugh:
Here is my ported TWRP for Oppo Find Muse which has MT6572 : http://d-h.st/HF1
You can edit my TWRP, but please make sure you give me a credit please
And if you want a tutorial, you can ask me
Iris 402
Can you Please Let me know how to make a cwm recovery of my lava iris 402.
thanks in advance.
CWM recovery for Karbonn A99
I want to install CWM in my karbonn A99 is it possible ..i have tried many CWM but was not successful...do u know the official CWM for karbonn A99..has anyone built a CWM recovery for karbonn A99...pls reply
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
shashank0161 said:
Can you Please Let me know how to make a cwm recovery of my lava iris 402.
thanks in advance.
Click to expand...
Click to collapse
r u able to boot into recovery...if yes then got to backup and restore n then restore it..choose the earlier backed up file ans select restore ...it will recover ur phone..and if u want to back up then simply select backup it backup ur current rom
kshashank said:
I want to install CWM in my karbonn A99 is it possible ..i have tried many CWM but was not successful...do u know the official CWM for karbonn A99..has anyone built a CWM recovery for karbonn A99...pls reply
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
r u able to boot into recovery...if yes then got to backup and restore n then restore it..choose the earlier backed up file ans select restore ...it will recover ur phone..and if u want to back up then simply select backup it backup ur current rom
Click to expand...
Click to collapse
U can use carliv touch recovery for mtk device
Please guide me which ctr version is suitable for this device.....required cwm recovery.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my iball4.5d Quadro
no mount SDCARD and EXT_SD
mt6572 Prestigio 3404 duos
look please
Guys,
if you would like to install CWM recovery you have to install the recover.img using MTK Droid Root & Tools, you probably get the screen upside down but it doesn't matter since you don't use the CWM all the time
Napst3r88 said:
thanks in advance
http://www.datafilehost.com/d/bde231bf
Click to expand...
Click to collapse
I have the device MT6572 kitkat ubifs.
Already some special custom recovery ported ubifs I've tried, but the problem is always on the screen that can not be touched on the recovery custom mode. Can I ask for help to make a custom recovery ubifs for my device, I include stock recovery from my device
With a resolution of 320x480
(Original_recovery) :
https://www.4shared.com/zip/HF-49x4Oce/Original_Recovery__indonesia_E.html
Please help me ...
Can someone port my stock recovery to cwm recovery! Here's my stock mt6572 with resolution 480x800 running kitkat
Hello! Please help me.
I did some modification in build.prop file and restarted my phone. Now it just stuck on mmx boot logo everytime i restart it. .
kmanish75 said:
Hello! Please help me.
I did some modification in build.prop file and restarted my phone. Now it just stuck on mmx boot logo everytime i restart it. .
Click to expand...
Click to collapse
U the same fb guy. Amit brother have provided a zip of. Build.prop . Flash it. And ur phone will be back to normal.
Sk.D said:
U the same fb guy. Amit brother have provided a zip of. Build.prop . Flash it. And ur phone will be back to normal.
Click to expand...
Click to collapse
please post link here bro. .i search everywhere but failed to find build.prop zip
thnx bro for your help. ! I just found it on fb(amit bro pin post)
kmanish75 said:
Hello! Please help me.
I did some modification in build.prop file and restarted my phone. Now it just stuck on mmx boot logo everytime i restart it. .
Click to expand...
Click to collapse
Flash a new stock rom through sp flash tools. .
check other threads you will find the guide on flashing through sp tools
Hi
I created a custom rom using the stock rom of Micromax A116i and after rebooting its stuck on Samsung Logo and not going further. Can some one help me in fixing this.
r u extract ur boot.img ?
vgopalap said:
Hi
I created a custom rom using the stock rom of Micromax A116i and after rebooting its stuck on Samsung Logo and not going further. Can some one help me in fixing this.
Click to expand...
Click to collapse
witch rom u port ?
r u extract ur boot.img ?
Iam trying to port Samsung Note 3 rom and I have not extracted boot.img, will that might be a problem
ajeeshcr20 said:
witch rom u port ?
r u extract ur boot.img ?
Click to expand...
Click to collapse
plz extract boot image
vgopalap said:
Iam trying to port Samsung Note 3 rom and I have not extracted boot.img, will that might be a problem
Click to expand...
Click to collapse
plz extract boot image both stock and port
copy zimage file stock 2 port
rapack it
add new boot image in 2 ur coustem rom and flash it throw CWM
Hello There..
This post is for those who recently flashed a Custom ROM on their Canvas HD A116, and after restoring their Stock ROM from recovery, couldn't change Boot Logo/ Splash to stock !!
If you recently flashed a custom ROM and are not able to change your Boot Logo / Splash Screen (that appears before Boot Animation) back to Stock, try this -
1. Download attached update.zip file and move it to your phone's SD Card.
2. Boot to Recovery (CWM/TWRP)
3. Choose Install ZIP from SD Card and select the downloaded ZIP.
4. Reboot and the Boot Logo is back to stock.
If you have problem please reply to this thread, and i'll try to help u...
I am a student tester and new to XDA............
Please click the Thanks button. It doesn't hurt !!!!!
-RESERVED-
------------------------------------------------------------------------------------------------------------------------------
Current Device-
Micromax A116 Canvas HD (Running Stock Android 4.2.1 , Rooted, with Xposed Framework)
-RESERVED-
vsvipul555 said:
-RESERVED-
Click to expand...
Click to collapse
Bro, post in correct section,.......... it should be in themes and apps or General.........
Bro first i thought of putting it in general, but then people experience this problem after flashing CUSTOM ROMS , SO I THOUGHT it was more appropriate to post it here...
Sent from my Micromax A116 using XDA Free mobile app
but all the problems relaed to boot logo are there in themes and apps sections
regards,
Andy
Look bro, it doesn't matter where it is... The thing is people can see it, whether it is here or there...
Sent from my Micromax A116 using XDA Free mobile app
Hey, could you post the reference link which you used to create the stock boot logo.. I'd like to create a custom one for my phone! Thanks
vsvipul555 said:
Hello There..
This post is for those who recently flashed a Custom ROM on their Canvas HD A116, and after restoring their Stock ROM from recovery, couldn't change Boot Logo/ Splash to stock !!
If you recently flashed a custom ROM and are not able to change your Boot Logo / Splash Screen (that appears before Boot Animation) back to Stock, try this -
1. Download attached update.zip file and move it to your phone's SD Card.
2. Boot to Recovery (CWM/TWRP)
3. Choose Install ZIP from SD Card and select the downloaded ZIP.
4. Reboot and the Boot Logo is back to stock.
If you have problem please reply to this thread, and i'll try to help u...
I am a student tester and new to XDA............
Please click the Thanks button. It doesn't hurt !!!!!
Click to expand...
Click to collapse
Worked like a Charm. Thanks for that.
hardiktrivedi0612 said:
Hey, could you post the reference link which you used to create the stock boot logo.. I'd like to create a custom one for my phone! Thanks
Click to expand...
Click to collapse
Hey, I used the Logo Builder program to create this zip !! (select logo.bin from your stock rom)
Thanks man needed this
Help
vsvipul555 said:
Hey, I used the Logo Builder program to create this zip !! (select logo.bin from your stock rom)
Click to expand...
Click to collapse
Where can i find logo.bin of my stock rom? And how to extract it? My device is O+360 MTK6582.
---------- Post added at 04:43 PM ---------- Previous post was at 04:19 PM ----------
vsvipul555 said:
Hello There..
This post is for those who recently flashed a Custom ROM on their Canvas HD A116, and after restoring their Stock ROM from recovery, couldn't change Boot Logo/ Splash to stock !!
If you recently flashed a custom ROM and are not able to change your Boot Logo / Splash Screen (that appears before Boot Animation) back to Stock, try this -
1. Download attached update.zip file and move it to your phone's SD Card.
2. Boot to Recovery (CWM/TWRP)
3. Choose Install ZIP from SD Card and select the downloaded ZIP.
4. Reboot and the Boot Logo is back to stock.
If you have problem please reply to this thread, and i'll try to help u...
I am a student tester and new to XDA............
Please click the Thanks button. It doesn't hurt !!!!!
Click to expand...
Click to collapse
Ymanwell said:
Where can i find logo.bin of my stock rom? And how to extract it? My device is O+360 MTK6582.
---------- Post added at 04:43 PM ---------- Previous post was at 04:19 PM ----------
Click to expand...
Click to collapse
Extract your ROM zip and you can find boot.img from there !!
Thanks just the thing I was looking for
There,there.
I have Micromax canvas a121, MSM8212 chipset,and CM 11
How to remove the ugly , Micromax splash screen logo from it. I have changed Boot animation but don't know how change splash screen log
Thanks bro
Can someone pls provide me the scatter file for A310?
Need to install stock ROM using SP Flash Tool nd my phone is bricked
did you got scatter file??
bro.. i also need scatter file for nitro a311 ...
please help me...
Sushant_Kumar said:
Can someone pls provide me the scatter file for A310?
Need to install stock ROM using SP Flash Tool nd my phone is bricked
Click to expand...
Click to collapse
try to search from here
if not request one
http://androidurdu.net/mediatek-scatter-files-download/
bhavincb said:
bro.. i also need scatter file for nitro a311 ...
please help me...
Click to expand...
Click to collapse
here is the scatter file u guys need .....try this file on the sp tool
hello xda members,
i have searched many site and finally reaches here. i am i will get my problem solved here..
friends i need a custom recovery for my Panasonic t40. i want to flash new rom in it... plz anyone can give me Cwm twrp Philz or ctr recovery i will thablnkful.
device panasonic t40
android version. kitkat 4.4.2
mt6582
thanks in advance friends
Try This..
http://forum.xda-developers.com/showthread.php?t=2798257
Can u give custom rom for panasonic t40.....?
thanks mate but i already have twrp, cwr and philz recovery for my handset..
and for custom rom mail me
[email protected]
[OFFICIAL THREAD]Custom recovery for Panasonic T40
As this is my first post on xda, I'm not allowed to add any outside links here.
You can visit my blog {thesuperdroid (dot) com} There is the link for Panasonic T40 recovery.img file. Download it from there.
And for flashing it on your device download Mobile Uncle tool apk from there.
Download both the files and copy it in the root of your sd card.
Install mobile uncle tool and give root permission to it.
Now click on Recovery Update.
It will automatically detect the recovery.img file.
Click on it. It will ask your permission to flash. Click ok.
All done. You'll boot into recovery. If this works for you, hit the thanks buttion.:good:
Has anyone tested it???
If you have tested it then plzzz inform ..
thesuperdroid said:
As this is my first post on xda, I'm not allowed to add any outside links here.
You can visit my blog {thesuperdroid (dot) com} There is the link for Panasonic T40 recovery.img file. Download it from there.
And for flashing it on your device download Mobile Uncle tool apk from there.
Download both the files and copy it in the root of your sd card.
Install mobile uncle tool and give root permission to it.
Now click on Recovery Update.
It will automatically detect the recovery.img file.
Click on it. It will ask your permission to flash. Click ok.
All done. You'll boot into recovery. If this works for you, hit the thanks buttion.:good:
Click to expand...
Click to collapse
Its stock recovery not custom bro .....all want custom recover :lol
Sent from my Panasonic T40 using XDA Labs
Get it from here
daddyc said:
Its stock recovery not custom bro .....all want custom recover :lol
Sent from my Panasonic T40 using XDA Labs
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/development/twrp-panasonic-t40-t3773731