*I'm not responsable for any damage to your device. Do this at your own risk*
I've unpacked the official CM13 snapshot flashable zip, replaced the files with COS13 system files and updated the boot.img
So finally, I got a full COS13 ZIP, including system, boot and firmware. Untouched. If you want to root, I recommend using Boeffla + Boeffla's su script
As it is COS, it includes GAPPS and CAPPS
It can be flashed coming from any ROM, since it will wipe and reflash system and firmware, BUT YOU SHOULD WIPE DATA, CACHE AND DALVIK.
I recommend using TugaPower's TWRP: https://www.androidfilehost.com/?w=files&flid=50417
Installation:
1. Download the zip
2. Wipe Data, dalvik and cache (except if you come from COS12.1, but then you could use the incremental update)
3. Flash the ROM
4.Flash Boeffla & SU (optional)
5. Enjoy!!
If you like, hit thanks button!!!!
Download: https://www.androidfilehost.com/?fid=24499762636006970
Changelog:
ZNH0EAS2JK builds:
build1:
-initial release
Click to expand...
Click to collapse
ZNH0EAS26M builds
build4
-Cerberus removed (rom extracted from a clean flash and ota update)
-Lockscreen issues fixed (there was a problem with gatekeeper due to MM changes, I've been looking around and learning, and then I knew that I should use snapshot's file_contexts instead of CM12.1S' ones)
build3
-fixed bug: some crappy lines in updater script were modifying symlinks and bugging some binaries
-used 7-zip maximum compression for a 30mb lighter zip
-Now updater script is ultra clean: everything is in DAT images
build2
-resized system img to fix some issues
YOU MUST REFLASH BUILD2 IF YOU FLASHED BUILD1... build1 had only 1mb left in /system.... sorry for that, you can dirty flash without wiping and it'll be perfect
build1
-initial release
Click to expand...
Click to collapse
Uhm uhm you ninja'd me. I got it too, was uploading on 150KB/s speed .-.
THANK the post if I deserve
thanks, I will give it a spin
Anyone is having crashes trying to install apks?
Inviato dal mio A0001 utilizzando Tapatalk
MZO said:
Uhm uhm you ninja'd me. I got it too, was uploading on 150KB/s speed .-.
THANK the post if I deserve
Click to expand...
Click to collapse
2mb/s upload here heheh
Well, my zip is based on modern DAT-system repacking, so it should be different thought
IronJacob said:
Anyone is having crashes trying to install apks?
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
That's strange... what error are you facing?
have you wiped data, cache & dalvik??? Since that seems something data-related
Anyway, I won't be able to test until tomorrow morning.
EDIT: It seems to be a COS13 bug. People flashing both incremental and this full zip are experiencing the issues randomly.
I can't reproduce it, so a logcat would be appreciated!!
Thank you so much. Just flashed it and it's working perfectly for me. I'm not having the APK install problem.
I need cyanogen os Recovery for this ,or do i need twrp ...i tried twrp but gives me error ,.
IronJacob said:
Anyone is having crashes trying to install apks?
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes on official incremental update. I haven't noticed any fixes but don't worry it will still install your apk it will just keep saying forced close for package installer.
Screenshot attached
klomp said:
I need cyanogen os Recovery for this ,or do i need twrp ...i tried twrp but gives me error ,.
Click to expand...
Click to collapse
You can flash it through TWRP. I used TWRP 3.0.0.0 and it worked fine. I wiped dalvik, system, data, and cache.
SathiyXIX said:
Yes on official incremental update. I haven't noticed any fixes but don't worry it will still install your apk it will just keep saying forced close for package installer.
Screenshot attached
Click to expand...
Click to collapse
So it might be a COS13 bug...
klomp said:
I need cyanogen os Recovery for this ,or do i need twrp ...i tried twrp but gives me error ,.
Click to expand...
Click to collapse
what error? i recommend using TugaPower's TWRP, the link is in the first post...
It can't be flashed through cyanogen recovery since it's not cyanogen signed...
manudroid19 said:
So it might be a COS13 bug...
Click to expand...
Click to collapse
That or it may be a bug related to the incremental updating. As when I originally installed it I also got Google play services update required. a factory reset fixed that, maybe when the official fastboot version is released it will fix it
Can i flash as secondary rom?
SathiyXIX said:
That or it may be a bug related to the incremental updating. As when I originally installed it I also got Google play services update required. a factory reset fixed that, maybe when the official fastboot version is released it will fix it
Click to expand...
Click to collapse
Hope this will fixed soon. I know it will still install apps, but it's just annoying to have this message everytime i try to install something. For me google play services have updated automatically at first boot
Inviato dal mio A0001 utilizzando Tapatalk
Can someone please post ThemeChooser.apk from COS13?
Thanks
manudroid19 said:
what error? i recommend using TugaPower's TWRP, the link is in the first post...
It can't be flashed through cyanogen recovery since it's not cyanogen signed...
Click to expand...
Click to collapse
SathiyXIX said:
That or it may be a bug related to the incremental updating. As when I originally installed it I also got Google play services update required. a factory reset fixed that, maybe when the official fastboot version is released it will fix it
Click to expand...
Click to collapse
Noop.Im on latest version and i haven't gt even a single bug..Package installer works fine though. I flash 12.1 fist.Then small updates and then incremental update of 6.1..Works fine
So no error in incremental update zip but an error in package installer in this full zip?
Update:
1. Installed successfully by TWRP_3.0.2-0 recovery.
2. Package Installer crash after .apk installation fixed after the first reboot.
3. For Root flash http://download.chainfire.eu/supersu-beta through recovery after 1st boot completion.
arindam4u said:
So no error in incremental update zip but an error in package installer in this full zip?
Click to expand...
Click to collapse
It seems that someone is having this issue and someone not also on incremental update. I have it and i'll try to do a factory reset to see if solve this issue.
Inviato dal mio A0001 utilizzando Tapatalk
Related
To install this rom is necessary Stock Recovery
Oxygen 2.0.1
1-Copy the downloaded file in the memory of your phone
2-Turn off the power of the OnePlus 2;
3-Now tanner by holding down the Volume keys down + Power;
4-Select Install Update or Install from SD and choose the zip file previously downloaded and copied to the OnePlus 2;
5-Wait for the end of the process
6-Wipe cache and Wipe Data;
7-Restart the OnePlus2 and enjoy OxygenOS 2.0.1 !
it is supposed to Wipe cache and Wipe Data; after installing? Never installed a rom that way.
Wipe Cache/Wipe Data after installation
hi
is a factory reset before the flash, mandatory?
How to get stock recovery after flashing twrp.I tried swiping not to disable stock recovery in twrp but of no use
Id like to know this as well... How to go back to stock recovery once on twrp
Me too. where can we find it?
Enviado desde mi ONE A2003 mediante Tapatalk
murdok83 said:
Id like to know this as well... How to go back to stock recovery once on twrp
Click to expand...
Click to collapse
Just dirty flash the most recent OxygenOS full ROM zip you can find (here's 2.0.2 (2.0.2 full ROM)), so without cleaning data, and you'll have your stock recovery back and will keep your files.
Waterdroid said:
Just dirty flash the most recent OxygenOS full ROM zip you can find (here's 2.0.2 (2.0.2 full ROM)), so without cleaning data, and you'll have your stock recovery back and will keep your files.
Click to expand...
Click to collapse
works!!!! thx, you save my dog
Waterdroid said:
Just dirty flash the most recent OxygenOS full ROM zip you can find (here's 2.0.2 (2.0.2 full ROM)), so without cleaning data, and you'll have your stock recovery back and will keep your files.
Click to expand...
Click to collapse
Ayeeeee.. Thanks.
Sent from my ONE A2005 using XDA Free mobile app
Oxygen Update Failed...
Hi,
Greetings from Bangladesh. I have downloaded Oxygen 2.0.1 ROM and followed the steps of installation. But as soon as the installation starts, a notification "Installation Failed" shows. I am not sure if its related to something called "Stock Recovery" cause I don't find such thing in my phone. (sorry for being a novice).
I have also tried to update my phone via OTA. But it also failed.
Any sort of help would be highly appreciated. Thank you.
Regards,
Salahuddin
Download OXYGEN OS 2.0.2 and install with stock recovery ...
nailibrahimli666 said:
Download OXYGEN OS 2.0.2 and install with stock recovery ...
Click to expand...
Click to collapse
Thanks for prompt reply.
But I don't find the "Stock Recovery" option in my phone.
Is "Stock Recovery" something supposed to be a pre-installed/stock android option or need any third-party installation?
mdsalahuddin said:
Thanks for prompt reply.
But I don't find the "Stock Recovery" option in my phone.
Is "Stock Recovery" something supposed to be a pre-installed/stock android option or need any third-party installation?
Click to expand...
Click to collapse
First, activate developer options, then activate advanced reboot there. Or press and hold home and volume down button, and you will be on recovery ...
nailibrahimli666 said:
First, activate developer options, then activate advanced reboot there. Or press and hold home and volume down button, and you will be on recovery ...
Click to expand...
Click to collapse
Downloaded Full ROM, enabled recovery mode and tried to install but same result....installation failed
Does the ROM vary according to OPT regional variations? Mine is A2001 Oxygen 2.0.0
Thanks.
mdsalahuddin said:
Downloaded Full ROM, enabled recovery mode and tried to install but same result....installation failed
Does the ROM vary according to OPT regional variations? Mine is A2001 Oxygen 2.0.0
Thanks.
Click to expand...
Click to collapse
Nope. Mine is A2001 too. Try unlock bootloader, with fastboot install TWRP recovery, then install any rom you want. I think this time installation will be succesfull
overon37 said:
works!!!! thx, you save my dog
Click to expand...
Click to collapse
Waterdroid said:
Just dirty flash the most recent OxygenOS full ROM zip you can find (here's 2.0.2 (2.0.2 full ROM)), so without cleaning data, and you'll have your stock recovery back and will keep your files.
Click to expand...
Click to collapse
What is dirty flash, and how to do it?
problem to update oxygen os
Hey, i have problems to update oxygen os . I download it and when I restart the phone , the phone fails to install it. I bought the phone from a Chinese company "To2c".
I'm not so good with mobiles and not so technical.
anyone that can help?
I'm running PAC JB now, and I watched Super Bass' YT video on flashing xposed with the multiboot patcher. But is it possible to just boot into TWRP and flash it after-the-fact? Rather than installing another ROM, switching to it, installing xposed onto PAC, switch back to PAC, then delete other ROM? Seems rather tedious.
I'm assuming this works for PAC as well?
Apparently not... I'm stuck in boot loop now. Followed instructions, wiped dalvik before and after zip flashed. Can't seem to boot into TWRP...
I have some pretty important stuff on the internal SD from the last few days. Can I recover them? @Moody66 @superbass311
Edit: I notice the version of xposed zip is different in the instructions here saying xposed-v71-sdk22-arm-by-romracer-20150816.zip and the video here saying xposed-v74-sdk22-arm.zip
Is that the issue?
Another edit: Got it to boot into TWRP, made a backup of the data without system files.
chill8888 said:
Apparently not... I'm stuck in boot loop now. Followed instructions, wiped dalvik before and after zip flashed. Can't seem to boot into TWRP...
I have some pretty important stuff on the internal SD from the last few days. Can I recover them? @Moody66 @superbass311
Edit: I notice the version of xposed zip is different in the instructions here saying xposed-v71-sdk22-arm-by-romracer-20150816.zip and the video here saying xposed-uninstaller-20150911-arm.zip
Is that the issue?
Another edit: Got it to boot into TWRP, made a backup of the data without system files.
Click to expand...
Click to collapse
Wipe cache and system and install the same ROM you had with gapps and that should get you out of bootloop
Sent from my Ascend Mate 2 using Tapatalk
superbass311 said:
Wipe cache and system and install the same ROM you had with gapps and that should get you out of bootloop
Click to expand...
Click to collapse
Thanks man. Which version of xposed should I be using with PAC?
This page shows v78 sdk 21, 22, and 23.
Disregard last post. We might want to take note in the instructions that xposed-v74-sdk22-arm-by-romracer-20150911.zip does NOT work with Nigel's pac_mt2_LP-MR1.Official_20151108-223449 build. I got it working properly with xposed-v78-sdk22-arm.zip from this page.
Hi guys,
i started this with a oneplus x 2.1.2. i wiped the dalvik system and cache and tried to install the 2.1.3x full zip. i got the error message Error executing updater binary ... then i tried to wipe the data also but it didnt change. i still get this error message. i also tried different zips (all of them were full zips of course).
the oneplus x was rooted, twrp 2.8.7.0. i dont have a backup. the recovery is still accessible.
how can i get my phone functional again?
Same here! Unable to install any custom Rom (I've tried to install some, including Resurrection Remix and CM12) because of that error.
Searching solution all around a million of forums, but it seems that nothing can solve this problem, so I turned back to stock.
(I've also tried with the stock recovery, but it failed too)
Sorry for my bad English, I'm Italian. ?
Inviato dal mio ONE E1003 utilizzando Tapatalk
DYR0 said:
Hi guys,
i started this with a oneplus x 2.1.2. i wiped the dalvik system and cache and tried to install the 2.1.3x full zip. i got the error message Error executing updater binary ... then i tried to wipe the data also but it didnt change. i still get this error message. i also tried different zips (all of them were full zips of course).
the oneplus x was rooted, twrp 2.8.7.0. i dont have a backup. the recovery is still accessible.
how can i get my phone functional again?
Click to expand...
Click to collapse
Have you tried doing a re-flash of TWRP from fastboot mode?
Remove the first line in the updater.script file and it will work.
MrKhozam said:
Have you tried doing a re-flash of TWRP from fastboot mode?
Click to expand...
Click to collapse
No, i have Not. Just the normal process?
Zoeriva said:
Remove the first line in the updater.script file and it will work.
Click to expand...
Click to collapse
What does it change?
Zoeriva said:
Remove the first line in the updater.script file and it will work.
Click to expand...
Click to collapse
Updater.script of TWRP?
Inviato dal mio ONE E1003 utilizzando Tapatalk
i just had to reflash the twrp now i could flash the rom. thanks a lot for your help
Flash this recovery on the community build: http://forum.xda-developers.com/devdb/project/dl/?id=20236
And then flash the super SU file via recovery:
https://www.androidfilehost.com/?fid=24591000424944601
Let me know if this works or you need any help ?
Did any1 tried??
Sent from my ONE E1003 using XDA-Developers mobile app
From other posts in other topics it seams that it's the only twrp version that installs OOS 3.1.1
Sent from my ONE E1001
trendchanger said:
Did any1 tried??
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried, and I can confirm it worked.
The only thing is that I can't get xposed installer to work properly. When I install it (v86 sdk23 arm) , every time that I tap on recent apps button, system ui crashes, so, I flashes the Uninstaller zip, and everything went well. But I miss xposed, if anybody has a solution, I would appreciate it
yes this is working
Jab_ said:
I tried, and I can confirm it worked.
The only thing is that I can't get xposed installer to work properly. When I install it (v86 sdk23 arm) , every time that I tap on recent apps button, system ui crashes, so, I flashes the Uninstaller zip, and everything went well. But I miss xposed, if anybody has a solution, I would appreciate it
Click to expand...
Click to collapse
Using the latest Blu spark twrp from his thread I flashed v86 sdk23 arm.zip and didn't have any issues on 3.1.1.
Exodusche said:
Using the latest Blu spark twrp from his thread I flashed v86 sdk23 arm.zip and didn't have any issues on 3.1.1.
Click to expand...
Click to collapse
Maybe the problem is not xposed itself, maybe the issue is related to an specific module. I'll try one by one tomorrow and see what happens, thank you!
Just delete the . rar part. This one worked for me I think your right though maybe bad file.
Exodusche said:
Just delete the . rar part. This one worked for me I think your right though maybe bad file.
Click to expand...
Click to collapse
I know what the problem was. My xposed zip was correct. As I thought, it was because of a module. "Android N-fy", in recents, I just had to uncheck quick switch and change no recent image and that was it. I don't know if that module is optimized for this oos especific build, because in settings of the phone, the module does not change as much as in lollipop oos. Thank you tho
I have latest official TWRP rn on OOS 2.2.2.. Should I just flash(dirty flash or clean flash after wiping) it normally? or revert to stock, flash the ROM and then use fastboot to flash recovery by bluspark?
Worked fine. Thanks OP.
bootloop when flashed supersu zip on oos 3.1.1 with twrp v41 recovery
i just saw that you have to use modified zip , so no other file to flash
thanks and sorry for not reading properly
TarushS said:
bootloop when flashed supersu zip on oos 3.1.1 with twrp v41 recovery
i just saw that you have to use modified zip , so no other file to flash
thanks and sorry for not reading properly
Click to expand...
Click to collapse
Oh lol, glad this helped
StraightEdgeKid said:
Worked fine. Thanks OP.
Click to expand...
Click to collapse
Np?
Sachin7843 said:
I have latest official TWRP rn on OOS 2.2.2.. Should I just flash(dirty flash or clean flash after wiping) it normally? or revert to stock, flash the ROM and then use fastboot to flash recovery by bluspark?
Click to expand...
Click to collapse
What exactly are you looking to do?
marwan2704 said:
What exactly are you looking to do?
Click to expand...
Click to collapse
I want to get OOS 3.1.1 and also be able to revert back to OOS 2.2.2 if I experience any bugs or don't like it so, I want to know when should I flash TWRP by bluspark?
Sachin7843 said:
I want to get OOS 3.1.1 and also be able to revert back to OOS 2.2.2 if I experience any bugs or don't like it so, I want to know when should I flash TWRP by bluspark?
Click to expand...
Click to collapse
Make sure you have both .zip files on your phone, clean flash 3.1.1 then boot it up. If you don't like it, you can go back to 2.2.2 via stock recovery anytime. You don't even need twrp unless you want to root, install Xposed or backup.
might be a bit off-topic but...
i was coming from sultans cm13 build - flashed stock recovery - wiped system - installed the community build.
So far so good
System works fine, but wifi drains system like hell (37% usage)
So i installed bluespark twrp and wanted to wipe cache & dalvik/art at once
-> initially i got an error -> "can´t mount /cache - invalid argument" (or so) - tried only to wipe cache and then it worked on the 3rd attempt...
But - after restarting only 12 Apps are "optimized", altough i have 100+ apps installed.... so i expect some filesystem/partition issue
Did you ever have this behaviour ?
I´m thinking about to do a full wipe in twrp and reinstall the community build -> other suggestions ?
error23 said:
i was coming from sultans cm13 build - flashed stock recovery - wiped system - installed the community build.
So far so good
System works fine, but wifi drains system like hell (37% usage)
So i installed bluespark twrp and wanted to wipe cache & dalvik/art at once
-> initially i got an error -> "can´t mount /cache - invalid argument" (or so) - tried only to wipe cache and then it worked on the 3rd attempt...
But - after restarting only 12 Apps are "optimized", altough i have 100+ apps installed.... so i expect some filesystem/partition issue
Did you ever have this behaviour ?
I´m thinking about to do a full wipe in twrp and reinstall the community build -> other suggestions ?
Click to expand...
Click to collapse
Sounds like you forgot to wipe data. Wipe system, data, cache and just flash 3.1.1. As for wifi drain it's not real and happens when you have wifi scanning on under location. Turn it off, reset network settings under backup/reset. Now reboot and should be gone. Turning off and rebooting might be enough but doesn't hurt to add network reset. Next cycle after reboot and full charge should be clean.
Exodusche said:
As for wifi drain it's not real and happens when you have wifi scanning on under location. Turn it off, reset network settings under backup/reset. Now reboot and should be gone. Turning off and rebooting might be enough but doesn't hurt to add network reset. Next cycle after reboot and full charge should be clean.
Click to expand...
Click to collapse
It's not the place, but I can confirm that it didn't work for me. I still have the drain from time to time.
And if I don't have the Wifi drain I have a service Google Play service drain (33% for today's charge for example...).
And sometimes, I even had the wifi drain with Wifi completly switched off...
Hi.
I hope that I can get solution.
These are what I did:
1. I used CyanogenMod13 and I flashed GApps. After I booted it, I unrooted my phone and I removed busybox.
2. After that, I updated my phone to recently builds.
3. But after 09/09 build, I didn't updated it. So I just tried to update 10.01 build today.
4. I thought TWRP would be more better to control, so I flashed it on my phone and I flashed new cm update by TWRP.
5. After I flashed it, I formatted Dalvik(ART) Cache and Cache. (I didn't do it sometimes but i remember that it didn't make any problem.)
6. I got my phone keep bootanimaion forever so I flashed 09/09 build.
7. But it didn't works, so I flashed CyanogenMod13 recovery image and I flashed CyanogenMod13 10/01 build by CyanogenMod recovery.
8. Now it doesn't works (it keeps bootanimation), so I'm here to ask you.
I don't wanna lose my all DATA which involves my app data.
Thanks for reading.
minami_kotori said:
Hi.
I hope that I can get solution.
These are what I did:
1. I used CyanogenMod13 and I flashed GApps. After I booted it, I unrooted my phone and I removed busybox.
2. After that, I updated my phone to recently builds.
3. But after 09/09 build, I didn't updated it. So I just tried to update 10.01 build today.
4. I thought TWRP would be more better to control, so I flashed it on my phone and I flashed new cm update by TWRP.
5. After I flashed it, I formatted Dalvik(ART) Cache and Cache. (I didn't do it sometimes but i remember that it didn't make any problem.)
6. I got my phone keep bootanimaion forever so I flashed 09/09 build.
7. But it didn't works, so I flashed CyanogenMod13 recovery image and I flashed CyanogenMod13 10/01 build by CyanogenMod recovery.
8. Now it doesn't works (it keeps bootanimation), so I'm here to ask you.
I don't wanna lose my all DATA which involves my app data.
Thanks for reading.
Click to expand...
Click to collapse
Install TWRP and make a backup of your Data, Boot, System partitions
Sent from my GT-S7580 using Tapatalk
DodoGTA said:
Install TWRP and make a backup of your Data, Boot, System partitions
Sent from my GT-S7580 using Tapatalk
Click to expand...
Click to collapse
Is that a only way to boot up my phone..?
minami_kotori said:
Is that a only way to boot up my phone..?
Click to expand...
Click to collapse
Yes, because it's required to clean flash CM 13 without losing data (because you can now do a clean flash when you have a backup)
Sent from my GT-S7580 using Tapatalk
DodoGTA said:
Yes, because it's required to clean flash CM 13 without losing data (because you can now do a clean flash when you have a backup)
Sent from my GT-S7580 using Tapatalk
Click to expand...
Click to collapse
Thanks for replying. I'm gonna do that.