Related
Hello! Some day i want to downgrade my Marshmallow to Lollipop. I installed stock ROM to my Honor 5X but in older android - Lollipop 5.1. And I get bricked it. On start on screen i can see first-step logo honor after it i can see second-step honor's logo and here i wait 30 minutes and nothing 45 minutes and nothing. Worse is this I can't back to my stock Marshmallow, when I'm installing my previous ROM - MM i get the same brick on second-step logo. I installed a few more ROMs and nothing. My bootloader is unlocked but when i try to flash cust/system by fastboot appear an error. FAILED (remote: Command not allowed). I think i tried everything, thank for help me.
PS. Sorry for bad English :/
EDIT.1 I tried to use this method from Thread: http://forum.xda-developers.com/honor-5x/help/ive-bricked-honor-5x-t3324225. But the same problem at fastboot.
cust and system won't get flashed on 5X, try force updating it with an UPDATE.APP package for your device.
Put it inside dload folder in root of the Sdcard, and press all three buttons (Vol UP + Vol DOWN + Power) after switching off your phone, to start updating.
Sent from my PLK-L01 using Tapatalk
Thank you. But i tried to get ROM back by UPDATE.APP and when i want to go back to Marshmallow i get second-step honor logo and nothing after it. When i want to get Lollipop i have error "Software can't be installed" - something like that. I heard something about "Transition package" or "Downgrade Package" ? Maybe it can be work. But i can't find those packages for honor 5x KIW-L21.
Bayont said:
Thank you. But i tried to get ROM back by UPDATE.APP and when i want to go back to Marshmallow i get second-step honor logo and nothing after it. When i want to get Lollipop i have error "Software can't be installed" - something like that. I heard something about "Transition package" or "Downgrade Package" ? Maybe it can be work. But i can't find those packages for honor 5x KIW-L21.
Click to expand...
Click to collapse
If the Marshmallow update went through a bit, then you'll need transition package, so take on some pain to find it. It should be out there somewhere.
Sent from my PLK-L01 using Tapatalk
That's maybe becouse i don't remove ROOT and Xposed before installing ROM, how to unroot by TWRP?
Bayont said:
That's maybe becouse i don't remove ROOT and Xposed before installing ROM, how to unroot by TWRP?
Click to expand...
Click to collapse
If you use the this version of TWRP > https://www.androidfilehost.com/?fid=24588212152305793
you can flash system.img and cust.img extracted from your Update.APP with HuaweiUpdateExtractor
fastboot boot twrp.img
then copy the files to the phone
then choose Install / Install Image / system.img or cust.img or recovery.img boot.img ..you choose
Also just saying your have a L21 does not help
is it KIW-L21 C432 or KIW-L21 C185
Now i backed to B130 and i have loop with message Optimizing system... this process going to 100% and phone reboot. And it looping.
Bayont said:
Now i backed to B130 and i have loop with message Optimizing system... this process going to 100% and phone reboot. And it looping.
Click to expand...
Click to collapse
your post tells us nothing about what you did, are we suppose to guess ?
if you successfully flashed System.img - boot .img - cust.img and recovery.img you can now use the dload / Update.app
clsA said:
if you successfully flashed System.img - boot .img - cust.img and recovery.img you can now use the dload / Update.app
Click to expand...
Click to collapse
Done but without any effect, the same problem, stuck at second-step honor logo ;/
Any ideas?
Bayont said:
Any ideas?
Click to expand...
Click to collapse
Well considering I still don't know what you have done. Its hard to guess the next step
Sent from my SM-N920T using Tapatalk
Ok, one more time. When i'm installing any ROM B130 or B330, stock or official doesn't matter, the same problem. After installing rom by UPDATE.APP my phone booting and booting and booting and nothing. When i'm installing rom images by TWRP - boot, cust, system It's the same problem Booting, booting and nothing. When i tried to flash rom by fastboot i have error: FAILED (remote: Command not allowed). I would like to try this: http://forum.xda-developers.com/honor-5x/help/how-restore-cust-partition-t3356769 But i don't know how to access to adb shell: when i type "adb shell" in cmd where i have adb it say to me: error: device '(null)' not found. I don't know what to do more.
How much time honor 5x system is installing?
How i can check my honor is KIW-L21 C432 or KIW-L21 C185?
Bayont said:
How i can check my honor is KIW-L21 C432 or KIW-L21 C185?
Click to expand...
Click to collapse
If you tried to install the wrong Update.app the updater would get to 5% and stop and eventually just reboot. Did you actually watch the update go to 100% and reboot ?
I think i found source of my problem. When i want to downgrade my system was B340.
I read something about downgrade. Without Transition Package I can't downgrade my system I can install only the same (B340) or higher.
This making brick when i'm installing B330 or B140.
Now i'm trying to install OTA B340 and i have another problem,
when i have B330 and installing B340 by small OTA 124MB I have stuck on 5% of installing. It becouse:
EDIT 2 : If you come from B330, don't try to flash the small B340 update as local update has simply been disabled by theHuawei/Honor devs !
Worse, with B340 you won't be able to downgrade to any lower version : at least not easily... INFO FROM: HERE
Click to expand...
Click to collapse
But when i'm installing B130 by TWRP and upgrading to B340 by big upgrade (1,36GB) it's stucking on 0% and i get info: DO NOT UNPLUG....
I think that becouse my version isn't B130 only B140. I'm checking it by DC-UNLOCKER. Output from it:
Code:
Found Phone : KIW-L21
Model : Huawei phone in fastboot mode
Serial NR. : My Serial
Firmware : KIW-L21C432B140
FB LockState: LOCKED
widevine LockState: UNLOCKED
Bootloader Lock State: UNLOCKED
Root State: ROOT
Bootloader WidevineKey: WidevineKey_VALID
System State: Bootloader in UNLOCKED state
Bootloader Version: 001.001.000
Battery state: battery is present
Maybe I should Restore backup from diffrent KIW-L21 by TWRP?
Bayont said:
I think i found source of my problem. When i want to downgrade my system was B340.
I read something about downgrade. Without Transition Package I can't downgrade my system I can install only the same (B340) or higher.
This making brick when i'm installing B330 or B140.
Now i'm trying to install OTA B340 and i have another problem,
when i have B330 and installing B340 by small OTA 124MB I have stuck on 5% of installing. It becouse:
But when i'm installing B130 by TWRP and upgrading to B340 by big upgrade (1,36GB) it's stucking on 0% and i get info: DO NOT UNPLUG....
I think that becouse my version isn't B130 only B140. I'm checking it by DC-UNLOCKER. Output from it:
Code:
Found Phone : KIW-L21
Model : Huawei phone in fastboot mode
Serial NR. : My Serial
Firmware : KIW-L21C432B140
FB LockState: LOCKED
widevine LockState: UNLOCKED
Bootloader Lock State: UNLOCKED
Root State: ROOT
Bootloader WidevineKey: WidevineKey_VALID
System State: Bootloader in UNLOCKED state
Bootloader Version: 001.001.000
Battery state: battery is present
Maybe I should Restore backup from diffrent KIW-L21 by TWRP?
Click to expand...
Click to collapse
Normally restoring a TWRP backup is no different than flashing System.img and boot.img
your bootloop is firmware related ... you need the full B340 package
Yes, you written in Honor 5x Repo:
Waiting for full B340 to appear on Honor support site.
Click to expand...
Click to collapse
At the moment there isn't any full B340 ROM for download. And any OTA B340 doesn't work for me, yes? For example:
B140 -> B340
http://update.hicloud.com:8180/TDS/d...ull/update.zip
changelog
http://update.hicloud.com:8180/TDS/d.../changelog.xml
Click to expand...
Click to collapse
Bayont said:
Yes, you written in Honor 5x Repo:
At the moment there isn't any full B340 ROM for download. And any OTA B340 doesn't work for me, yes? For example:
Click to expand...
Click to collapse
Then you just have to wait
I don't publish the updates I just post them
Sent from my SM-N920T using Tapatalk
I can't back to Stock Lolipop by editing some files or install B340 from B140 by OTA
how to restore Deleted CUST folder without root ?
1-i have locked bootloader H850 non EU version .
2-i tried root under android 7 but failed
3-downgraded to 6.0.1 and root ok
but no SD Card, No Camera
4-so decided to revert to stock ,but uppercut coudn't detect my mobile (unknow model)
5-i searched and found a solution via deleting CUST folder (via adb root shell commands)
6-i flashed stock android 6 and 7 for my mobile (AME region) (used before)..
bit ORANGE CARRIER RELATED apps found on my mobile !!!! AND NT-CODE issues MSG on booting !!
what can i do... no root , no bootloader unlock, deleted CUST Folder..
please help me .....
update 1
solved with help from @damir_baltoin https://forum.xda-developers.com/showpost.php?p=72441848&postcount=10
update 2
flashing original KDZ H85020f_00_OPEN_AME_OP_0410.kdz leads to NTCODE issuse again !!
maybe because i tried LG flash tools with board D/L option with some dz file !
anyway ,, reverting back to H85020f_00_ORG_COM_OP_0424.kdz with no NTCODE issues ,waiting for full root with twrp ...
Flashing kdz restores cust folder
i flashed original stock KDZ (6 and 7) for my mobile (base on IMEI)
but it seems branded to Spain-orange !!!!!
Im not sure but you can try..
Flash back to 6.0 root and install twrp. Then flash complete open eu 7.0 zip. From autoprime xda thread
akki7636 said:
Im not sure but you can try..
Flash back to 6.0 root and install twrp. Then flash complete open eu 7.0 zip. From autoprime xda thread
Click to expand...
Click to collapse
thank you for help ...
but i can not flash TWRP due to locked bootloader...
i'm trying to re-root to see what can i do with CUST ..
sad_but_cool1 said:
thank you for help ...
but i can not flash TWRP due to locked bootloader...
i'm trying to re-root to see what can i do with CUST ..
Click to expand...
Click to collapse
Im having a zip which restores deleted cust folder in nougat rom. Originaly zip is made to be flashed on fulmics rom.
You can find that zip in my this thread https://forum.xda-developers.com/lg-g5/how-to/rooted-stock-based-rom-volte-fix-t3564924 use it at your own risk
akki7636 said:
Im having a zip which restores deleted cust folder in nougat rom. Originaly zip is made to be flashed on fulmics rom.
You can find that zip in my this thread https://forum.xda-developers.com/lg-g5/how-to/rooted-stock-based-rom-volte-fix-t3564924 use it at your own risk
Click to expand...
Click to collapse
thank you bro
i hope i can flash any CFW ,,
i have locked bootloader and can not flash twrp
but i tried method on
https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508
within flashin DZ in flashtool, i saw CUST was flashed !!
but flashing process failed ,stucked on MiniOS ,
but uppercut can now recognize my LGH850 , flashing via it and still stucked on MiniOS !!!
pressing -vol leads to Factory Reset Status 2 !!!
sad_but_cool1 said:
thank you bro
i hope i can flash any CFW ,,
i have locked bootloader and can not flash twrp
but i tried method on
https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508
within flashin DZ in flashtool, i saw CUST was flashed !!
but flashing process failed ,stucked on MiniOS ,
but uppercut can now recognize my LGH850 , flashing via it and still stucked on MiniOS !!!
pressing -vol leads to Factory Reset Status 2 !!!
Click to expand...
Click to collapse
i think i cant help you..as im not a dev..
I hope you are choosing upgrade option with uppercut
thank you man,,,
update !!
@damir_balto send me a pm and suggest to flash H85020f_00_ORG_COM_OP_0424.kdz to solve NTCODE errors (he has same problem)
and yahhhh ,, no NTCODE error !!!! thanks man !!!!
i will try to flash original kdz for my region AME and test !!
sad_but_cool1 said:
@damir_balto send me a pm and suggest to flash H85020f_00_ORG_COM_OP_0424.kdz to solve NTCODE errors (he has same problem)
and yahhhh ,, no NTCODE error !!!! thanks man !!!!
i will try to flash original kdz for my region AME and test !!
Click to expand...
Click to collapse
no problem, I was not sure will it help others as well so I sent you an PM, glad it works for you too. Anyway after flashing this H85020f_00_ORG_COM_OP_0424.kdz my phone remain Europe Open without any bloatware from ORG.
damir_balto said:
no problem, I was not sure will it help others as well so I sent you an PM, glad it works for you too. Anyway after flashing this H85020f_00_ORG_COM_OP_0424.kdz my phone remain Europe Open without any bloatware from ORG.
Click to expand...
Click to collapse
Would this .kdz help me get rid of my NTCODE error which I encounter after reboot when I flash an EUR Open rom on my device bought in Romania but with Israel (IL) location?
Thank you.
Hello.
My honor 9 (stf al00) cant boot. It stuck on huawei erecovery.
I've tried hard reset, wipe cache & wipe data but still stuck.
And also I dont have the driver.
Can anyone please help me.
What happened before ?
You were on nougat or oreo ? which build ?
Which region ? C00 ? or rebranded C432 or else ?
oslo83 said:
What happened before ?
You were on nougat or oreo ? which build ?
Which region ? C00 ? or rebranded C432 or else ?
Click to expand...
Click to collapse
I dont know what happend, give my brother use for awhile, suddenly he return to me with this problem.
its on nougat. sorry what build, i dont know.
Region China?. i dont know about the C00 or rebranded and c432 that you said. really have no idea.
OK.
So your Honor9 is STF-AL00 and was on nougat.
But:
-you don't know on which firmware region it was and you don't know if it was rebranded to STF-L09
-i guess your brother could also have updated it to oreo, or rebranded it before bricking it...
If you did not have any chinese app stock installed like QQ, Weibo or Tancent News then you could be probably on region C432 (or C10 or C185) ;
If so use this with an exfat external micro sdcard or usb-otg EXFAT formatted:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
First try with C432B130, read the instructions inside, do it, then report.
thanks.. i will try it tonight,
i've done try update with sd card before, but not with those file inside the link you give.
and also not with EXFAT fromat sd card, but it said Software Update Failed.
i will try this and update here again..
thanks
honor 9 stf-al00
phone unlocked and frp unlock
bricked the phone installing oreo.
twrp is installed but all the roms i flash i get error 9.
dload with update.app get stuck at 5% and after "system update failed"
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
At this point i just want the phone running anything but everything that i do doenst work
ruigarcia said:
honor 9 stf-al00
phone unlocked and frp unlock
bricked the phone installing oreo.
twrp is installed but all the roms i flash i get error 9.
dload with update.app get stuck at 5% and after "system update failed"
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
At this point i just want the phone running anything but everything that i do doenst work
Click to expand...
Click to collapse
Are you with nougat or oreo partitionni'g scheme ?-> are you actually booting on a nougat twrp or on a oreo twrp ?
Which region your phone were on on ?
original chinese C00 ?
or rebranded C432, C10 or else?[/QUOTE]
oslo83 said:
Are you with nougat or oreo partitionni'g scheme ?-> are you actually booting on a nougat twrp or on a oreo twrp ?
Which region your phone were on on ?
original chinese C00 ?
or rebranded C432, C10 or else?
Click to expand...
Click to collapse
[/QUOTE]
right now with oreo partitions, never rebranded the phone, and i was running update b362 so i assume im still on c00, otherwise i dont think i would have worked.
twrp is 3.1.1.1 open kirin edition
right now with oreo partitions, never rebranded the phone, and i was running update b362 so i assume im still on c00, otherwise i dont think i would have worked.
twrp is 3.1.1.1 open kirin edition[/QUOTE]
OK so, the facts :
1) B362 firmware are mostly european (C432) or russian (C10) and could be japanese (C635).
So your phone was previously rebranded from chinese to one of these region.
It's not a problem if not done wrong, maybe your case...
2)'twrp 3.1.1.1 open kirin edition' is a custom recovery for NOUGAT and not for oreo.
And then some more questions:
-Can you boot your phone to normal mode ?
-You were on nougat before brick ?
-You were one oreo B362 before brick ?
-The brick happens after it upgraded from mogat to oreo B362 ? If so, how did you update ? normal OTA ? forced OTA with android app Firmware Finder ?
i can only boot the phone in recovery mode (twrp and erecovery) and fastboot
i installed b360 through forced ota and then when i was in the system i updated again to b362 throught settings\system update
i was on oreo b362 before brick, and i remember now that my navigations buttons were not working so i flashed a custom kernel to fix it, but
that prevented me from booting to the system again. (Proto Kernel)
edit: used that tool you gave me and i managed to flash STF-L09_C432B360.
ruigarcia said:
i installed b360 through forced ota and then when i was in the system i updated again to b362 throught settings\system update
Click to expand...
Click to collapse
So your phone was correctly rebranded in the past and we can deduce you are now on region C432 or C10.
ruigarcia said:
i was on oreo b362 before brick, and i remember now that my navigations buttons were not working so i flashed a custom kernel to fix it, but
that prevented me from booting to the system again. (Proto Kernel)
Click to expand...
Click to collapse
You flashed a custom B360 kernel over your B362 : It was why your phone bootlooped just after !!
Flashing a stock B362 kernel would have solve the bootloop.
ruigarcia said:
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
Click to expand...
Click to collapse
You said you had flashed boot, kernel and recovery from an update.app.... Which build number and region this update.app was from ?
You could flash back B362 stock boot, kernel and recovery and it should boot if you did not messed something else...
So, the best for you will be to:
1) use HuRUpdater to flash C432B360 or C10B360 firmware (depending of your actual phone region)
2)then flash the B360 kernel fix
3)then update via OTA or huRUpdater.
oslo83 said:
So your phone was correctly rebranded in the past and we can deduce you are now on region C432 or C10.
You flashed a custom B360 kernel over your B362 : It was why your phone bootlooped just after !!
Flashing a stock B362 kernel would have solve the bootloop.
You said you had flashed boot, kernel and recovery from an update.app.... Which build number and region this update.app was from ?
You could flash back B362 stock boot, kernel and recovery and it should boot if you did not messed something else...
So, the best for you will be to:
1) use HuRUpdater to flash C432B360 or C10B360 firmware (depending of your actual phone region)
2)then flash the B360 kernel fix
3)then update via OTA or huRUpdater.
Click to expand...
Click to collapse
i flashed many update.app, i messed up with that, cant remember the last one.
just flashed twrp for oreo now, went to terminal and i can see "ro.hw.vendor: (hw)
does this tell me my phone region?
with this twrp for oreo i also get another error when flashing a rom zip "failed to mount "\system" (permission denied)
Stop messing with random dload folder and update.app ; From what i seen only special one called 'service repair' will work.
No. It does not.
Stop messing trying to flash random zip when on twrp ; From what i heard only special one called 'FullOTA-MF-PV' will work this way with twrp.
Be bold and try HuRUpdater witj C432B360 following my latter post.
oslo83 said:
Stop messing with random dload folder and update.app ; From what i seen only special one called 'service repair' will work.
No. It does not.
Stop messing trying to flash random zip when on twrp ; From what i heard only special one called 'FullOTA-MF-PV' will work this way with twrp.
Be bold and try HuRUpdater witj C432B360 following my latter post.
Click to expand...
Click to collapse
i used HuRUpdater and worked. thank you! cant update to b362 through settings tho
C432 is maybe the wrong region if you don't get ota update notification to b362/b364 when checking for update in settings :
1) What's your build number version on Settings/System/about ?
2) What's the country shown when you dial**#*#2846579#*#**- on the dial pad, then go to 'Network Information Query' and then to 'Vendor Country Info' ?
---------- Post added at 19:44 ---------- Previous post was at 19:42 ----------
Dial**#*#2846579#*#*
---------- Post added at 19:46 ---------- Previous post was at 19:44 ----------
sorry typos.
So dial:
Code:
*#*#2846579#*#*
im so sorry, i cant access my pc right now.
i will update soon i can get access to my pc.
oslo83 said:
C432 is maybe the wrong region if you don't get ota update notification to b362/b364 when checking for update in settings :
1) What's your build number version on Settings/System/about ?
2) What's the country shown when you dial**#*#2846579#*#**- on the dial pad, then go to 'Network Information Query' and then to 'Vendor Country Info' ?
---------- Post added at 19:44 ---------- Previous post was at 19:42 ----------
Dial**#*#2846579#*#*
---------- Post added at 19:46 ---------- Previous post was at 19:44 ----------
sorry typos.
So dial:
Code:
*#*#2846579#*#*
Click to expand...
Click to collapse
vendor:hw
country:eu
build number:stf-l09 8.0.0.360(c432)~
reflashed b360 and now i get update to b364 on settings. still no capacity buttons..
So, you're fine on C432.
Just flash the B360 kernel fix while you're still on B360 https://forum.xda-developers.com/showpost.php?p=75772700 ;
This will fix your buttons.
You can then do a normal update via settings
ok so i tried to update using vol up + vol down + power button, again it said software install failed
inside those rar file got 2 file, 1 is UPDATE.APP which is 4gb++ and another one is update_STF-L09_hw_eu.app size around 1.4gb.
try update with 4gb file, appear 5% loading and then appear software install failed, same with 1.4gb file...
the only option i got is reboot system now when the error come out..
already did wipe cache & data before i do the update..
any idea? am i doing wrong step?
I have the same problem...When the installation begins, it stops at 5%
My phone is turned off. I tried to install recovery but got nothing
any idea please
So I unlocked bootloader and FRP. Installed magis. It was working, but when i tried to install xposed, it went into a bootloop. Now I'm stuck at eRecovery screen with nothing working. I've done factory reset 10-15 times. Clicking 'Download latest version and recovery' is also not giving anything. Can go to fastboot mode. Went there, saw FRP was locked. Thinking I'll redo the process, I relocked the bootloader. But now the commands aren't working as neither 'allow oem unlock' nor 'usb debugging' is enabled. I can't enable them as phone won't boot up. Any solutions? Please help.
Model ANE-AL00
Arseon said:
So I unlocked bootloader and FRP. Installed magis. It was working, but when i tried to install xposed, it went into a bootloop. Now I'm stuck at eRecovery screen with nothing working. I've done factory reset 10-15 times. Clicking 'Download latest version and recovery' is also not giving anything. Can go to fastboot mode. Went there, saw FRP was locked. Thinking I'll redo the process, I relocked the bootloader. But now the commands aren't working as neither 'allow oem unlock' nor 'usb debugging' is enabled. I can't enable them as phone won't boot up. Any solutions? Please help.
Model ANE-AL00
Click to expand...
Click to collapse
Go to TWRP and restore your system backup.
kilroystyx said:
Go to TWRP and restore your system backup.
Click to expand...
Click to collapse
But I didn't install a custom recovery. So no TWRP
Arseon said:
But I didn't install a custom recovery. So no TWRP
Click to expand...
Click to collapse
So, then try flash same system partition via fastboot.
I tried flashing original firmware using DC-Pheonix. But phone is still in bootloop
What your build ?
If this phone with OREO or with NOUGAT / Android 8.x or 7.x ?
Possibly didn't work because the rom was of a different built. I've an ANE-AL00 8.0.0.131. Any solutions for this fix? Thanks.
Arseon said:
Possibly didn't work because the rom was of a different built. I've an ANE-AL00 8.0.0.131. Any solutions for this fix? Thanks.
Click to expand...
Click to collapse
You should try at least flash the system from fullota, the firrmware can be found with Firmware Finder for Huawei
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C00B131&firmware_page=0
kilroystyx said:
You should try at least flash the system from fullota, the firrmware can be found with Firmware Finder for Huawei
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C00B131&firmware_page=0
Click to expand...
Click to collapse
Yes. I flashed same file only. But not booting up. In DC, it says file writing complete when in fastboot mode. But in upgrade mode, it fails at 5/31 PACKAGE_TYPE.
I'm using update.app from update.zip. Is that what I should be using? Should I use the other zip files(cn, public etc.)? Please help.
Arseon said:
Yes. I flashed same file only. But not booting up. In DC, it says file writing complete when in fastboot mode. But in upgrade mode, it fails at 5/31 PACKAGE_TYPE.
I'm using update.app from update.zip. Is that what I should be using? Should I use the other zip files(cn, public etc.)? Please help.
Click to expand...
Click to collapse
It seems like you are doing well, but have you read the instructions carefully? They recommend when something fail.
https://www.dc-unlocker.com/huawei-phone-flashing-in-fastboot
@Arseon
you write "ANE-AL00 8.0.0.131" - this is not the "full" build : what's your Cxxx ?
on FirmwareFinder i see (example)ANE-AL00C00B133 ( C00 = Country '00'; B133 = Build Counter )
you need the correctly build from your phone !!!
you can boot to bootloader ?
your bootloader is unlockt ?
your FRP is unlock ?
you have download your build FULL-Update ?
you have with UpdateExtractor from Update.app (inside Update.zip)
- ramdisk.img
- recovery_ramdisk.img
- system.img
extracted ? The Extractor do automatic for all *.img a *.img.header.
you have copy this 6 files to your ADB-Folder ?
If this all "YES" then boot to bootloader and
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
reboot phone, phone start to eRecovery and Low-Level format "data" and boot to system.
phone start as "new" phone (initial settings)
good : phone work
no good : all data is lost
AND very important : do not relock the bootloader !
ONLY if bootloader 'unlockt' you can self-repair !
JamesBott said:
@Arseon
you write "ANE-AL00 8.0.0.131" - this is not the "full" build : what's your Cxxx ?
on FirmwareFinder i see (example)ANE-AL00C00B133 ( C00 = Country '00'; B133 = Build Counter )
you need the correctly build from your phone !!!
Click to expand...
Click to collapse
Mine is ANE-AL00 8.0.0.131(C675). I used ANE-AL00C00B131 (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2370/g1789/v138744/f1/full/filelist.xml ) to flash
JamesBott said:
you can boot to bootloader ?
your bootloader is unlockt ?
your FRP is unlock ?
Click to expand...
Click to collapse
Sadly no. Both bootloader and frp are locked.
JamesBott said:
you have download your build FULL-Update ?
you have with UpdateExtractor from Update.app (inside Update.zip)
- ramdisk.img
- recovery_ramdisk.img
- system.img
extracted ? The Extractor do automatic for all *.img a *.img.header.
you have copy this 6 files to your ADB-Folder ?
If this all "YES" then boot to bootloader and
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
reboot phone, phone start to eRecovery and Low-Level format "data" and boot to system.
phone start as "new" phone (initial settings)
good : phone work
no good : all data is lost
Click to expand...
Click to collapse
Since bootloader and frp locked, adb commands are not working. Hence I'm using DCPheonix to flash the file. But without luck. It's still botting to eRecovery only
your phone is C675, you flash C00 : no correct
now is inside your phone a 'mix'
i think, you can no self-repair - sorry
@Arseon, my opinion your system partition is a mess due to xposed installation fail.
The solution for this case is restore system partition, it worked for me in the past.
In some cases we can get lucky install a clean system partition even if it is from other region code, because the main differences between regions are located in the other partitions
But what I learning is that system from C00 region don’t follow this standard because at least is missing google apps.
With DCPheonix did with get lucky and flash all files or just the first 4 and stop in the PACKAGE_TYPE?
same situation
I am in the same situation, can only boot to erecovery. I tried boot fastboot flash 4 files (because i have bootloader and frp unlocked) and dc-unlocker without luck. In both cases pass the flash but phone still not boot, only erecovery. I can get twrp works now following this guide: https://forum.xda-developers.com/hu...covery-twrp-3-2-1-0-p20-lite-edition-t3800692 but i dont have backups because i do a factory reset and the internal storage is empty. What can i do in twrp? I flash the correctly firmware for my phone ANE-LX3 8.0.0.104(C605), with this file ANE-LX3C605B130 (8.0.0.130) from here: http://pro-teammt.ru/firmware-database/?firmware_model=ANE-LX3&firmware_page=0 . Any other suggestion?
Edit: I can solve my problem. When I connect my phone in fastboot mode to dc-unlocker it give me an info:
Found Phone : ANE-LX3
Model : Huawei phone in fastboot mode
IMEI : 867903xxxxxxxxxxxx
Serial NR. : KPS7N18xxxxxxxxx
Firmware : ANE-LX3 8.0.0.104(C605
IMEI1:867903032092188
MEID:00000000000000
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3829mv
and with the firmware info I download that version exactly (ANE-LX3 8.0.0.104(C605, found on easy-firmware web page, paid), flash with dc-phoenix, and i got it, the device boots again. Hope it help to anyone, thks. This thing cost me 28 usd, too expensive for unroot a device lol
alvavaca said:
I am in the same situation, can only boot to erecovery. I tried boot fastboot flash 4 files (because i have bootloader and frp unlocked) and dc-unlocker without luck. In both cases pass the flash but phone still not boot, only erecovery. I can get twrp works now following this guide: https://forum.xda-developers.com/hu...covery-twrp-3-2-1-0-p20-lite-edition-t3800692 but i dont have backups because i do a factory reset and the internal storage is empty. What can i do in twrp? I flash the correctly firmware for my phone ANE-LX3 8.0.0.104(C605), with this file ANE-LX3C605B130 (8.0.0.130) from here: http://pro-teammt.ru/firmware-database/?firmware_model=ANE-LX3&firmware_page=0 . Any other suggestion?
Click to expand...
Click to collapse
This thread can help you a lot => HuRUpdater
kilroystyx said:
This thread can help you a lot => HuRUpdater
Click to expand...
Click to collapse
Thks for your help, I can solve my problem. When I connect my phone in fastboot mode to dc-unlocker it give me an info:
Found Phone : ANE-LX3
Model : Huawei phone in fastboot mode
IMEI : 867903xxxxxxxxxxxx
Serial NR. : KPS7N18xxxxxxxxx
Firmware : ANE-LX3 8.0.0.104(C605
IMEI1:867903032092188
MEID:00000000000000
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3829mv
and with the firmware info I download that version exactly (ANE-LX3 8.0.0.104(C605, found on easy-firmware web page, paid), flash with dc-phoenix, and i got it, the device boots again. Hope it help to anyone, thks. This thing cost me 28 usd, too expensive for unroot a device lol
---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------
Arseon said:
I tried flashing original firmware using DC-Pheonix. But phone is still in bootloop
Click to expand...
Click to collapse
In pretty sure you are flashing the wrong firmware, try to push your version with dc-unlocker in fastboot and download the excatly matching firmware. Good luck
well, i have all of this+one more tougher stuff..
Well, I tried to install a custom ROM on my P20 Lite (ane-lx1) via TWRP aand when I failed I ended up into a bootloop, but the thing that got me a headache after a full day of forum research is that when I attempted to install the custom ROM the TWRP wanted a .img file, not a .zip file, so I rebooted after I alreday wiped out everything, I made a backup into the phone, BUT I cant access it because.. the TWRP freezes every time at the TeamWin logo.....the only thing that is accessible now its the fastboot&rescue mode and I'm out of juice and desperated...the bootloader is enabled...i think i preety much killed my phoen and my brain trying to get an android stock experience...i really have to get some sleep,well..thank you for your attention, if you have any suggestions that would pick me up from this mess I would be very greatfull, i'll see what i had left to do as soon as i'm able to...for now, have a good night/day/afternoon, whatever side of the world you're from
Edit:
I left the phone all night into bootloobing and after it got FULLY discharged, I dont know exactly how but the TWRP hasn't popped out, instead after this I was able to get into eRecovery and now it is downloading the 146(C432) version. I guess that I got lucky
Hello I have an ANE-LX3, my problem is the following: I have been trying to unlock the bootloader of my huawei p20 lite with HCU for two weeks but it tells me that the security patch is very new. What I did was download MRT FLASHING TOOL and an UPDATE.APP with System 8.0.0.046 (092Y) and everything was fine, I was able to unlock the bootloader, until I noticed that I no longer receive OTA updates
thanks
artur.mok12 said:
I noticed that I no longer receive OTA updates
Click to expand...
Click to collapse
IMO you have wrong Model and incomplete FW on board. I bet your build number is "system 0.0.046" and Model - unknown .
I don't know where you got this tutorial to unlock the bootloader, but for Kirin-devices it is not a good idea.
IMO you can try the following :
A) update via eRecovery & wi-fi
B) install Service ROM using dload method for your current EMUI version and region (but it will lock your BL again ! )
C) if you are still running EMUI 8, try update your phone via fastboot - flash cust.img, ramdisk.img , recovery_ramdisk.img and system.img ( extract the required files from Service ROM using Huawei Update Extractor).