Need help about i9100 SII bettery problem - Galaxy S II Q&A, Help & Troubleshooting

hello
i am facing problem with s2 i9100
i connected my phone to pc via usb ... and after some time phone turn off ..
itry to turn on it stuck at samsung logo ..
i remove the bettery and turn on agian .. i wont turn on ... now only black screen ...
now after some again i insert the bettery in phone ... phone turn hot but no turn on
but i remove the bettery it get normal ..
plz help me this one is it bettry issue ...
phone wont turn on wont charge ... only black screen ...

Try to replace the battery, but first boot in download mode - vol down + home + power on. if download mode is on you can flash stock rom. If is hw problem check this post!

i9100
ultravy said:
Try to replace the battery, but first boot in download mode - vol down + home + power on. if download mode is on you can flash stock rom. If is hw problem check this post!
Click to expand...
Click to collapse
no download mode ... when i try to insert bettery it get hot .. not even recovery mode
its all black
i try to replace bettery nothing happend ..
try to check with voltage machine it shows phone is working ...
phone need to flash ..?
it sddenly turn off now not turning on ...
any suggestion

Verify if you have a short between battery connectors on the motherboard, you will need a multimeter to check, it happened to me and i removed C565 - 22uf, check again for short circuit, if still running hot check power ic max8997 - need to be replaced!

Related

[Q] my s2 not getting switched on...

i jst changed my version to 2.3.4, after that i switched off and now its not starting..and i also tried for download mode (home + power + volume down)bbut its also not working....can any one help me plzzz?????????
What happens when you plug it in your computer? Does device manager recognized use it or is it completely dead? If its dead, take it back to samsung
Sent from my GT-I9100 using XDA Premium App
Dead battery ??? Its unusual for a flash to result in nothing at all .
Usb recovery jig may get you to download mode .
jje
wen i plug it to computer..thr's a battery display on the screen ,but its not charging.....
wen i tried for download mode ...its saying..empty battery cant download..but its a full battery

[Q] Phone not switching on after charge!!

Hi
I just flashed UI-One MIUI 4.0 PORT [BETA 1] by TEAM MAC (http://forum.xda-developers.com/showthread.php?t=1517939) and the new baseband yesterday night and the phone was working fine. But when i went to sleep the phone had about 25% charge so in the morning it was switched off. Here's what i've done
-I have charged my phone for an hour now via usb/ac adapter and tried removing the battery , sdcard and putting it back in ( some post said to try it) but still the phone doesnt switch on.
- All it shows is the battery indicator when switched off (the really big one being charged) and about 50% is done.
-That screen comes on even if i press and hold power button
-Not able to go into recovery
Anyone any ideas????
rishi_storm said:
Hi
I just flashed UI-One MIUI 4.0 PORT [BETA 1] by TEAM MAC (http://forum.xda-developers.com/showthread.php?t=1517939) and the new baseband yesterday night and the phone was working fine. But when i went to sleep the phone had about 25% charge so in the morning it was switched off. Here's what i've done
-I have charged my phone for an hour now via usb/ac adapter and tried removing the battery , sdcard and putting it back in ( some post said to try it) but still the phone doesnt switch on.
- All it shows is the battery indicator when switched off (the really big one being charged) and about 50% is done.
-That screen comes on even if i press and hold power button
-Not able to go into recovery
Anyone any ideas????
Click to expand...
Click to collapse
well battery drain has been the biggest issue in miui rom as it doesnt get into sleep mode so the soultion just put ur phone in charging for some time on plug socket not via pc .
now use adb to boot into recovery using command or just press the 3 button combo home+vol down+ power and check if it loads into recovery if not than adb is best method to boot into recovery ,
your bootloader is corrupted.. if you can somehow made it to emergyency mode then the situation is undercontrol.. if u can't then take your fone to cc
Sent from my LG-P500 using xda premium
SOLVED
Thanks for the replies guys. You were right. I manual forced emergency mode . Now repairing.

S3 Will not boot

My s3 will not boot. It shows no signs of power. Even when plugged in... Anyone have any ideas?
did this happen randomly? or did the phone completely Die? what were you doing?
these things are needed to help you out.
My Phone wont turn on is not enough info.
Sure, I loaded liquid jelly bean on the phone and installed gapps. Upon reboot it failed to turn on. I can't even get into recovery.
mpalatsi said:
My s3 will not boot. It shows no signs of power. Even when plugged in... Anyone have any ideas?
Click to expand...
Click to collapse
I9300 phone and flashed I9300 firmware .
No recovery then download mode and flash stock firmware .
No download mode USB Jig to try for download mode .
That fails its a JTag repair .
jje
Yes yes ^^^^in that order
Can you see the welcome screen or anything else? Or it's completely dead?
Pull the battery, wait for a few minutes, if you have a jig insert it in usb port of yor phone ( if you don`t volume down + menu + power buttons all at once). If you come in downloadmode flash a stock rom and after boot you can reroot.
If you don`t have a jig, order one from somewhere. You can not do without it.

The reason for can't turn on Galaxy i9100?

:crying:When i wake up this morning, my 9100 just can be turned on, then i charge it with its charger, and the phone still can't work, i press the power button try to turn on the phone, but just failed again and again, i don't know why, my phone had rooted. who can tell me the reason?
junior2012 said:
:crying:When i wake up this morning, my 9100 just can be turned on, then i charge it with its charger, and the phone still can't work, i press the power button try to turn on the phone, but just failed again and again, i don't know why, my phone had rooted. who can tell me the reason?
Click to expand...
Click to collapse
-Remove your battery for few (about 5) minutes,
-reinsert your battery (ensure the battery has contact with the good pins)
-connect your charger, if your phone comes back to life, then all is well
Report what happens
Swyped from my Galaxy SII
First of all , use a new fully charged battery ( may be a friend's GS2 battery ) and try to boot ur phone up
If it doesnt work then boot into recovery mode try to wipe data and cache or try download mode
If ur phone doesnt boot up neither in download or recovery mode , then u can use a USB JIG , if this fails try to do a Jtag
Provide more info if ur phone lights up and gives u the battery charge animation or not .( it might be ur battery is just bricked )

Red flashing light

So my phone was in bootloop and i tried to flash new room (stock one) after that phone died (due low battery) and now i cant trun it on :/ only red flashing light apear when i conect it to pc/wall charger and still cant turn on i tried that someone said to let it be for 10 mins after that to hold all keys (volume up + down + power) to calibrate power cell but still no luck.
I have another one htc onex+ but for that i fixed my issue if only i could turn it on so i can get into bootloadeer run my script to charge battery for a bit and then flash right room and install stock room.
Realy please help me out here.
i realy need help
Btw phpne gets warm when i stcuk it in charger but no responsse at pc side so cant realy do anything from pc right now.i just need a way t turn it on
Try with a normal charger.
tapatalked

Categories

Resources