Help me!
C4 has brick. Red led. Hard keys do not work.
Flashtool error:
02/030/2016 00:30:53 - INFO - (MainSWT.java:164) - Device connected with USB debugging off
02/030/2016 00:30:53 - INFO - (MainSWT.java:165) - For 2011 devices line, be sure you are not in MTP mode
Same problem here, help us!
Hmmm this thing is like a virus... we have 3 or 4 threads with the same issue...
-kOS- said:
Hmmm this thing is like a virus... we have 3 or 4 threads with the same issue...
Click to expand...
Click to collapse
same problem c4 dual e5363 plz help.:crying:
phone is totally dead
Quaihenlle said:
Help me!
C4 has brick. Red led. Hard keys do not work.
Flashtool error:
02/030/2016 00:30:53 - INFO - (MainSWT.java:164) - Device connected with USB debugging off
02/030/2016 00:30:53 - INFO - (MainSWT.java:165) - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
What version of flashtool u used?
And What u did exaxtly?
And What u want to do?
me too. how to fix the problem
same problem but we always didn't see this notices for not using it for c4 and c5 :S
same problem bro.
did you find a solution?
Quaihenlle said:
Help me!
C4 has brick. Red led. Hard keys do not work.
Flashtool error:
02/030/2016 00:30:53 - INFO - (MainSWT.java:164) - Device connected with USB debugging off
02/030/2016 00:30:53 - INFO - (MainSWT.java:165) - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
Same problem but woth e5303 version c4
---------- Post added at 03:14 PM ---------- Previous post was at 02:59 PM ----------
They say DONT USE flashtool above 0.9.18.6 but i used 0.9.25.0 and bricked totally my phone my fault but i had no choice because phone (C4 E5303) was already soft-bricked after trying to flash Android Pie 9.0 with img files with fastboot adb commands it was softbricked i think and as someone else mentioned when i flashed USERDATA.img or SYSTEM.img that happened and lastly i flashed normal ftf xperifirm firmware (lollipop 5.1 it said flashing finished )with flashtool 0.9.25.0 i hardbricked it and now only red light is on when connected to charger!!! I think its not even charging hehe noob! I guess i have to buy new phone as it is not repairable i think was very good phone only problem as it is well known was the battery running better on 5.1 lollipop than 6.0 marshmallow why i continued after that i dont know...i wanted newer version and i ended up with no phone hehehe!!
---------- Post added at 03:26 PM ---------- Previous post was at 03:14 PM ----------
chibulata said:
Same problem but woth e5303 version c4
---------- Post added at 03:14 PM ---------- Previous post was at 02:59 PM ----------
They say DONT USE flashtool above 0.9.18.6 but i used 0.9.25.0 and bricked totally my phone my fault but i had no choice because phone (C4 E5303) was already soft-bricked after trying to flash Android Pie 9.0 with img files with fastboot adb commands it was softbricked i think and as someone else mentioned when i flashed USERDATA.img or SYSTEM.img that happened and lastly i flashed normal ftf xperifirm firmware (lollipop 5.1 it said flashing finished )with flashtool 0.9.25.0 i hardbricked it and now only red light is on when connected to charger!!! I think its not even charging hehe noob! I guess i have to buy new phone as it is not repairable i think was very good phone only problem as it is well known was the battery running better on 5.1 lollipop than 6.0 marshmallow why i continued after that i dont know...i wanted newer version and i ended up with no phone hehehe!!
Click to expand...
Click to collapse
Flashtool with the choice of flashing in different speeds was the right for me the first time i flashed lollipop 5.1 which was the first version i got when bought it i chose minimum speed with some data wiped in the wipe selection because it was flicking when booting the phone wasn't working but with speed lowered it was OK but when i reinstalled different version below 0.9.18.6 the flash speed wasnt there and even in the one where i tuned it irt disappeared i think i dont know why thats why i wnet to use above 0.9.18.6 version of flashtool specifically the one before newest (which on flashtoll site says c4 and c5 can brick withis version) 0.9.25.0
I dont know maybe i amde something wrong but i think the speed choice and simulation all of these were not there for some reason which if didnt happen i wouldnt hard bricked my phone anyways......should have kept 5.1 lollipop was very good faster than 6.0!!
Please Help...!
Same problem as above mention..! :crying::crying:
Please give solutions on this problem and thanks in advance.
--Flashtool use (Flashtool_0.9.25.0)
When connected to PC the phone with red light and turns on/off every 15 to 20 seconds.
Flashtool messages:
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
Hoping to have solutions on this problem.
I just want to save my device, thanks a lot...!
Jeorge01 said:
Same problem as above mention..! :crying::crying:
Please give solutions on this problem and thanks in advance.
--Flashtool use (Flashtool_0.9.25.0)
When connected to PC the phone with red light and turns on/off every 15 to 20 seconds.
Flashtool messages:
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
Hoping to have solutions on this problem.
I just want to save my device, thanks a lot...!
Click to expand...
Click to collapse
There's no known solution to that.
On the same Flashtool website it clarifies that you should not use it if you own a C4/C5 Ultra or you will have hardbrick
Related
hello,
my Xperia P's Usb port is now working it's charging but couldn't connect to any PC or OTG Media ....
as PC connection not working so i m unable to flash my phone in flashboot mode.
i tried to consult to service center guys they say as my device is rooted they can't help me fix this problem....
i don't want to loose my phone please help me.... every thing in my phone is brand new and original but as i use custom kernel & rom ...so they are not accepting my phone ....
is there any other way i can use to flash my device to stock ... so i can get it fixed .
i can turn on my phone but it shows no sim no wifi ...
please help...
thanking you
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
ChikeD said:
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
Click to expand...
Click to collapse
yes i checked .. flash mode is not working not even fastboot mode ...
yes it's charging ...i tried 4-5 different cables ...i also checked cables with my brother's phone they were working fine...
it started a week before everything was working great i tried to connect my device i thought it would b new rom's problem so it will b fixed... so i try to flash other rom but accidentally i formatted system after wiping data and factory reset ... but that rom hangs as it says unable to mount system...
i try the older rom it flashed but in about phone there's baseband version is unknown, wifi was not turning on and i can't gain root access via terminal emulator or titanium backup or any other root app...
i thought to revert everything back via flashtool but my device couldn't be connected in flash mode... green light goes on n turned to red again and battery start to charge ...
sorry for wrong english ...
but thanks for your interest and reply ...
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
miteshlakhwani said:
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
Click to expand...
Click to collapse
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
i also try to get it diagnosed at local street repair shop as sony service center guys behaved really bad with me ... not even check my device they turn it on instead of sony logo it shows nemesis kernel logo so they say your device is rooted we can't accept it ...
i felt v.bad ...
local street repair guy told me to leave my device with hi for a day or 2 ... but i don't trust them so i couldn't do that...
he told me that port is ok it might b an ic chip which get's fungus or any kind of short circuit is happening there only ...
i m totally confused
thanks for ur reply
ChikeD said:
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
Click to expand...
Click to collapse
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
miteshlakhwani said:
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
Click to expand...
Click to collapse
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
ChikeD said:
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
Click to expand...
Click to collapse
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
miteshlakhwani said:
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
Click to expand...
Click to collapse
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
ChikeD said:
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
Click to expand...
Click to collapse
i also tried that too in CWm too there's no sign of any connection in pc ...
service center guy said that replacing port is not possible so they had to replace complete board ... n that will cost around 80% of cost of device....
but they won't do it as my device is rooted ...
This happened with my S3 just recently and they swore it wasn't the USB connector if it would charge. I called T-Mobile and got upset and told them I plug in an identical S3 and it shows immediately with mine it won't not even in download mode. They swapped it out for me.
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
dara007_168 said:
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
Click to expand...
Click to collapse
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
ChikeD said:
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
Click to expand...
Click to collapse
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
No SD card, and you can relock BL, but not without flashtool.
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
miteshlakhwani said:
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
Click to expand...
Click to collapse
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
dara007_168 said:
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
yes i enquire about replacing board from sony service center they told it will cost approx 80% of cost of mobile ...
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I can't find any possible way to recover hardbricked C5.
It is frustrating.
Xperia C5 Ultra Dual E5563 Bricked
padfut said:
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I didn't find any possible way to recover hardbricked C5.
It is frustrating.
Click to expand...
Click to collapse
Me too, had trouble like this
padfut said:
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I didn't find any possible way to recover hardbricked C5.
It is frustrating.
Click to expand...
Click to collapse
Yeah, too many people I have read on this forum have bricked their phones. No definite guide to do it properly either at the moment.
arjun.arora said:
You don't need custom recovery for this mod to work, just replace the correct apk file and change the permissions to rw-r--r--
You should be rooted to replace the apk. Please read the instructions in the original post carefully.
Click to expand...
Click to collapse
Omg it worked.. thanks a lot arjun arora...
padfut said:
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I can't find any possible way to recover hardbricked C5.
It is frustrating.
Click to expand...
Click to collapse
How did u install recovery for c5..
Your phone stuck on flashmode( most mediatek with non removable batts).. Just simply charge it overnight using your wall charger( it won't charge anyway). When you wake up hopefully it's alive again...
---------- Post added at 03:43 PM ---------- Previous post was at 03:41 PM ----------
padfut said:
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I can't find any possible way to recover hardbricked C5.
It is frustrating.
Click to expand...
Click to collapse
Your phone stuck on flashmode( most mediatek with non removable batts).. Just simply charge it overnight using your wall charger( it won't charge anyway). When you wake up hopefully it's alive again...
donedos said:
Your phone stuck on flashmode( most mediatek with non removable batts).. Just simply charge it overnight using your wall charger( it won't charge anyway). When you wake up hopefully it's alive again...
---------- Post added at 03:43 PM ---------- Previous post was at 03:41 PM ----------
Your phone stuck on flashmode( most mediatek with non removable batts).. Just simply charge it overnight using your wall charger( it won't charge anyway). When you wake up hopefully it's alive again...
Click to expand...
Click to collapse
I have removed and reconnected battery once So It can't be stuck on flashmode But I have no choice.
So I tried your way.
I have been charging my C5 just after I read your reply and it's charging until now but nothing happens.
It is clear that flashmode isn't the problem
i would like to get your dead phone...
hii, im using this same model mobile since aug,2015.... last month my mobile fall down, when im riding bike, and the phone got heavy damage.....the display is broken...even the panel also got heavy bends.... and the only thing is, my motherboard is in good condition....so, if you are interested to make your mobile useless,.... please donate it for me,....... unless you get a better solution for your mobile to turn on......
waiting for your reply..... @ [email protected]
regards,
Sathish M.
it is a problem of flashtool
when i was using old flashtool then device was ok
when i upgrade flashtool to latest 0.9.22 then after successful flashing device is not getting power up
due to warranty sony care changed motherboard of my device
again i flashed ftf and phone was dead
so it is a problem of flashtool
dont use latest flashtool
use 0.9.18 version
is 0.9.18 version working OK ? is it safe to use on Xperia c5 Ultra?
so sony xperia delebrately push us to brick our devices with thier own tool..!!!
mozafar said:
so sony xperia delebrately push us to brick our devices with thier own tool..!!!
Click to expand...
Click to collapse
No as this flashtool isn't official Sony software although it does download official Sony firmware. Sonys official software is called EMMA and only works on unlocked Bootloader devices
yes they are doing that. Mine is also dead wile upgrading using xperia companion
The same problem
padfut said:
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I can't find any possible way to recover hardbricked C5.
It is frustrating.
Click to expand...
Click to collapse
i had the same problem, went to the store where i bought the phone told them it did not power on after charging and they sended it back to sony, sony confirmd i did not wrong witht he phone and replaced my motherboard.
My sony c5 ultra e5533 dead after flashing
Hello guys im in great trouble kindly help me out
After flashing with sony flash tool mu C5 ultra become dead just black screen.
No screen light, no led blink no vibration also not recongnized by pc kindly help how to overcome the problem cos it
is now think bricked....
Thanks
salmankhan.rules said:
Hello guys im in great trouble kindly help me out
After flashing with sony flash tool mu C5 ultra become dead just black screen.
No screen light, no led blink no vibration also not recongnized by pc kindly help how to overcome the problem cos it
is now think bricked....
Thanks
Click to expand...
Click to collapse
It clearly states on the flashtool download page and on here on the flashtool page/thread NOT to use flashtool to flash c4+c5 mediatek powered Xperia devices as this will result in a hard brick I.e. You now have a permanent paperweight no idea why it is only those two mediatek Xperias as the xa works fine with flashtool.
Sent from my Xperia XA using XDA Labs
i have same problem but my led just turn on red with USB plugin nothing more no flashmode or fast mode , just please some one tell me how to fix it
padfut said:
I used my C5 with E5563_29.1.B.0.87_1296-9001_R4A firmware for 3 month until yesterday.
I rooted, have recovery installed and everything was just fine.
But It died when flashing E5563_29.1.B.0.101_1296-9001_R4A.ftf.
I used Flashtool 0.9.21.0 x64 and used xperifirm to download firmware
I have been flashed Sony devices for yearss and I didn't noticed anything wrong.
Battery was fine, Flashtool didn't report any errors for all downloading and flashing procedure.
But my C5 just hardbricked.
No flashmode, No fastboot, Charging animation and red led working but that's all.
When connect to PC it is recoginzed as "USB Serial Device (COM4)"
I can't find any possible way to recover hardbricked C5.
It is frustrating.
Click to expand...
Click to collapse
Hey... I'm having the same trouble as you did .... It would be helpful for me to know . What did you do after that? Did you recovered your phone? Or just visited to the sony service center??? Please help me
My C5 Ultra is hard-bricked too. Is there any progress regarding recovering C5 Ultra?
Good afternoon, I have a g4 MOTO plus replica MT6580, was connected to flash without flash tool, and the process was halted, and now the flashtool not recognized anymore the device, but the device is recognized by the usb when plugged.
Sorry my bad english.
Which flashtool were you using? Is your phone still working or is it bricked?
Augustoandro said:
Which flashtool were you using? Is your phone still working or is it bricked?
Click to expand...
Click to collapse
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Try keeping the phone on until the battery drains out, I was stuck on a similar situation once.
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
yurisalt said:
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Click to expand...
Click to collapse
Try keeping the phone on until battery drains out, I was in a similar situation once.
any one have solution to fix hard bricked xperia xa ultra only red light on
no fastboot flashboot pc detect unkown device
pc disconnect device every 4 second and reconnect
i flashed this rom F3212_36.0.B.2.109_1302-4436_Customized_MEA
flash completed but after its not turn on
if any one have solution pls share
me too
I have the same issue but in my case I didn't do anything on my phone.
I was just watching video on youtube then this happen. The phone got black out and then no sign of life just Red light when i plugin to computer but device not detected
Please Help
Even I install the latest Version of Gordon's Gate Driver, still not detect on my computer.
Please I am begging for help
Please Please Please!
jjhhaayy41 said:
I have the same issue but in my case I didn't do anything on my phone.
I was just watching video on youtube then this happen. The phone got black out and then no sign of life just Red light when i plugin to computer but device not detected
Please Help
Even I install the latest Version of Gordon's Gate Driver, still not detect on my computer.
Please I am begging for help
Please Please Please!
Click to expand...
Click to collapse
Hardware Problem.
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
wondercool said:
any one have solution to fix hard bricked xperia xa ultra only red light on
no fastboot flashboot pc detect unkown device
pc disconnect device every 4 second and reconnect
i flashed this rom F3212_36.0.B.2.109_1302-4436_Customized_MEA
flash completed but after its not turn on
if any one have solution pls share
Click to expand...
Click to collapse
Does your device match with the Firmware you downloaded?.
kiukirimas said:
Hardware Problem.
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
Does your device match with the Firmware you downloaded?.
Click to expand...
Click to collapse
Hi, I know this post is old but I need urgent help with this case!
I Have the exact same problem, but I checked and the Firmware I flashed was 1302-4436 but my phone is f3212 SI 1302-3617
Is there any solution to this problem?? Please Help .
some can give us officially working boot.img and recovery.img for our device xa ultra F3212
Search on google 'red light of death xperia.' If no any way to go to green light(download mode), emmc dead.
Got a J9110 which was on 55.1.A.0.748 (Customized NOBA with CDA 1318-7934).
Connected it to the PC to flash 55.1.A.3.49 (Customized UK with CDA 1319-2846).
Flash was successful, but now the device won't boot.
Every time you try to turn it on it says 'Your device is corrupt it can't be trusted and will not boot'.
Any suggestions on what to do?
Tried flashing with newflasher and flashtool, same result.
EDIT: Solved. See post here - https://forum.xda-developers.com/showpost.php?p=81636785&postcount=8
Use Xperia Companion to repair firmware. User data will be lost.
augie7107 said:
Use Xperia Companion to repair firmware. User data will be lost.
Click to expand...
Click to collapse
Xperia Companion is being painfully slow for me, downloading at 1.5 Mbps. It will never get done at that rate.
I found an old Nordic FTF for the J9110. It's based on Android Pie, but I flashed that, and the phone boots up just fine.
When I flash Customized UK, it doesn't boot and gives me the error shown above.
I have read flashtool now supports Xperia 1 if you would like to try that route.
You have to erase user data when flashing or you will get a bootloop, at least for me.
Or like someone else said, use repair on xperia companion.
I have this problem too before, but what i do is using xperia companion and software repair.
But u have too used good usb c cable... This problem will occur if u use cheap cable
The problem might be the Antivirus too!
*Disable it.
*Try using the different cable than provided because once my phone didn't work with the USB C to USB C connection cable(had to use old cable from Sony Phone).
Meanwhile, If you can flash lower version or other region ftf then all is Okay with your phone.
I find Flashtool as the safe tool to do so.
Maybe tick the erase userdata while flashing.
---------- Post added at 11:44 ---------- Previous post was at 11:34 ----------
MeltdownSpectre said:
Got a J9110 which was on 55.1.A.0.748 (Customized NOBA with CDA 1318-7934).
Connected it to the PC to flash 55.1.A.3.49 (Customized UK with CDA 1319-2846).
Flash was successful, but now the device won't boot.
Every time you try to turn it on it says 'Your device is corrupt it can't be trusted and will not boot'.
Any suggestions on what to do?
Tried flashing with newflasher and flashtool, same result.
Click to expand...
Click to collapse
For the "Your device is corrupt it can't be trusted and will not boot " reason; I had to replace the board in repair center.
It never booted to flashmode but I could boot to fastboot and that didn't help.
You are luck enough that the lower version worked for you.
augie7107 said:
I have read flashtool now supports Xperia 1 if you would like to try that route.
Click to expand...
Click to collapse
snake218 said:
You have to erase user data when flashing or you will get a bootloop, at least for me.
Or like someone else said, use repair on xperia companion.
Click to expand...
Click to collapse
blegs said:
I have this problem too before, but what i do is using xperia companion and software repair.
But u have too used good usb c cable... This problem will occur if u use cheap cable
Click to expand...
Click to collapse
jeoleo7 said:
The problem might be the Antivirus too!
*Disable it.
*Try using the different cable than provided because once my phone didn't work with the USB C to USB C connection cable(had to use old cable from Sony Phone).
Meanwhile, If you can flash lower version or other region ftf then all is Okay with your phone.
I find Flashtool as the safe tool to do so.
Maybe tick the erase userdata while flashing.
---------- Post added at 11:44 ---------- Previous post was at 11:34 ----------
For the "Your device is corrupt it can't be trusted and will not boot " reason; I had to replace the board in repair center.
It never booted to flashmode but I could boot to fastboot and that didn't help.
You are luck enough that the lower version worked for you.
Click to expand...
Click to collapse
Thank you all for the responses.
Turns out the firmware I had downloaded from XperiFirm was corrupt.
I deleted it and re-downloaded a fresh copy and it worked just fine.
I was going crazy because I had wiped userdata several times and it refused to boot.
Oh great.
All the best. ?