any one have solution to fix hard bricked xperia xa ultra only red light on
no fastboot flashboot pc detect unkown device
pc disconnect device every 4 second and reconnect
i flashed this rom F3212_36.0.B.2.109_1302-4436_Customized_MEA
flash completed but after its not turn on
if any one have solution pls share
me too
I have the same issue but in my case I didn't do anything on my phone.
I was just watching video on youtube then this happen. The phone got black out and then no sign of life just Red light when i plugin to computer but device not detected
Please Help
Even I install the latest Version of Gordon's Gate Driver, still not detect on my computer.
Please I am begging for help
Please Please Please!
jjhhaayy41 said:
I have the same issue but in my case I didn't do anything on my phone.
I was just watching video on youtube then this happen. The phone got black out and then no sign of life just Red light when i plugin to computer but device not detected
Please Help
Even I install the latest Version of Gordon's Gate Driver, still not detect on my computer.
Please I am begging for help
Please Please Please!
Click to expand...
Click to collapse
Hardware Problem.
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
wondercool said:
any one have solution to fix hard bricked xperia xa ultra only red light on
no fastboot flashboot pc detect unkown device
pc disconnect device every 4 second and reconnect
i flashed this rom F3212_36.0.B.2.109_1302-4436_Customized_MEA
flash completed but after its not turn on
if any one have solution pls share
Click to expand...
Click to collapse
Does your device match with the Firmware you downloaded?.
kiukirimas said:
Hardware Problem.
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
Does your device match with the Firmware you downloaded?.
Click to expand...
Click to collapse
Hi, I know this post is old but I need urgent help with this case!
I Have the exact same problem, but I checked and the Firmware I flashed was 1302-4436 but my phone is f3212 SI 1302-3617
Is there any solution to this problem?? Please Help .
some can give us officially working boot.img and recovery.img for our device xa ultra F3212
Search on google 'red light of death xperia.' If no any way to go to green light(download mode), emmc dead.
Related
Hi,
Please help me to fix this sony tablet S, it don´t boot, i try to update system from sd but it say "Prohibit update as a result of checking version or base sku".
The tablet model is SGPT112CO/S
I attach the log file of adb,
thanks
Anyone can help me with this please...
I don't use AIO and flash because i need to wait to experienced users comments and sugestions...
*nobody cares the faq* @stifilz We should do something about it.
Sent from my Sony Tablet S using xda app-developers app
The driver for windows "MTP device" not install because the service not exist, wich driver i can use for flasher?
Tha flasher show "waiting device"
Please help, what happen with this forum?
.:10101:. said:
Hi,
Please help me to fix this sony tablet S, it don´t boot, i try to update system from sd but it say "Prohibit update as a result of checking version or base sku".
The tablet model is SGPT112CO/S
I attach the log file of adb,
thanks
Click to expand...
Click to collapse
Need you to try install any zip twice in a row and then pull recovery.log again. That recovery log was 'blank'
I cant install the driver for atp device in windows and the flasher is waiting device, please help me with The driver, i try but none
smgdev said:
*nobody cares the faq* @stifilz We should do something about it.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
What more can we do? I got it stickied... LOL
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
.:10101:. said:
I cant install the driver for atp device in windows and the flasher is waiting device, please help me with The driver, i try but none
Click to expand...
Click to collapse
There is a guide for installing the drivers.... How can you bricked if it turns on? Nneeds to be on for flasher or at least Sony logo with USB debugging enabled?
stifilz said:
What more can we do? I got it stickied... LOL
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
There is a guide for installing the drivers.... How can you bricked if it turns on? Nneeds to be on for flasher or at least Sony logo with USB debugging enabled?
Click to expand...
Click to collapse
Haha, yeah..
Sent from my Sony Tablet S using xda app-developers app
The tablet show the sony logo and when it is connect via usb windows show "Dispositivo MTP USB - Este dispositivo no puede iniciar. (Código 10)", the "Sony Tablet ADB Driver Automated Installer" are installed, what can i do?
how can i use AIO, flasher, ADB, if the driver MTP is not installed and i try all drivers but none does it?
The debugging mode is not enabled and the tablet stop in sony logo...
nobody can help me, please
Help me!
C4 has brick. Red led. Hard keys do not work.
Flashtool error:
02/030/2016 00:30:53 - INFO - (MainSWT.java:164) - Device connected with USB debugging off
02/030/2016 00:30:53 - INFO - (MainSWT.java:165) - For 2011 devices line, be sure you are not in MTP mode
Same problem here, help us!
Hmmm this thing is like a virus... we have 3 or 4 threads with the same issue...
-kOS- said:
Hmmm this thing is like a virus... we have 3 or 4 threads with the same issue...
Click to expand...
Click to collapse
same problem c4 dual e5363 plz help.:crying:
phone is totally dead
Quaihenlle said:
Help me!
C4 has brick. Red led. Hard keys do not work.
Flashtool error:
02/030/2016 00:30:53 - INFO - (MainSWT.java:164) - Device connected with USB debugging off
02/030/2016 00:30:53 - INFO - (MainSWT.java:165) - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
What version of flashtool u used?
And What u did exaxtly?
And What u want to do?
me too. how to fix the problem
same problem but we always didn't see this notices for not using it for c4 and c5 :S
same problem bro.
did you find a solution?
Quaihenlle said:
Help me!
C4 has brick. Red led. Hard keys do not work.
Flashtool error:
02/030/2016 00:30:53 - INFO - (MainSWT.java:164) - Device connected with USB debugging off
02/030/2016 00:30:53 - INFO - (MainSWT.java:165) - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
Same problem but woth e5303 version c4
---------- Post added at 03:14 PM ---------- Previous post was at 02:59 PM ----------
They say DONT USE flashtool above 0.9.18.6 but i used 0.9.25.0 and bricked totally my phone my fault but i had no choice because phone (C4 E5303) was already soft-bricked after trying to flash Android Pie 9.0 with img files with fastboot adb commands it was softbricked i think and as someone else mentioned when i flashed USERDATA.img or SYSTEM.img that happened and lastly i flashed normal ftf xperifirm firmware (lollipop 5.1 it said flashing finished )with flashtool 0.9.25.0 i hardbricked it and now only red light is on when connected to charger!!! I think its not even charging hehe noob! I guess i have to buy new phone as it is not repairable i think was very good phone only problem as it is well known was the battery running better on 5.1 lollipop than 6.0 marshmallow why i continued after that i dont know...i wanted newer version and i ended up with no phone hehehe!!
---------- Post added at 03:26 PM ---------- Previous post was at 03:14 PM ----------
chibulata said:
Same problem but woth e5303 version c4
---------- Post added at 03:14 PM ---------- Previous post was at 02:59 PM ----------
They say DONT USE flashtool above 0.9.18.6 but i used 0.9.25.0 and bricked totally my phone my fault but i had no choice because phone (C4 E5303) was already soft-bricked after trying to flash Android Pie 9.0 with img files with fastboot adb commands it was softbricked i think and as someone else mentioned when i flashed USERDATA.img or SYSTEM.img that happened and lastly i flashed normal ftf xperifirm firmware (lollipop 5.1 it said flashing finished )with flashtool 0.9.25.0 i hardbricked it and now only red light is on when connected to charger!!! I think its not even charging hehe noob! I guess i have to buy new phone as it is not repairable i think was very good phone only problem as it is well known was the battery running better on 5.1 lollipop than 6.0 marshmallow why i continued after that i dont know...i wanted newer version and i ended up with no phone hehehe!!
Click to expand...
Click to collapse
Flashtool with the choice of flashing in different speeds was the right for me the first time i flashed lollipop 5.1 which was the first version i got when bought it i chose minimum speed with some data wiped in the wipe selection because it was flicking when booting the phone wasn't working but with speed lowered it was OK but when i reinstalled different version below 0.9.18.6 the flash speed wasnt there and even in the one where i tuned it irt disappeared i think i dont know why thats why i wnet to use above 0.9.18.6 version of flashtool specifically the one before newest (which on flashtoll site says c4 and c5 can brick withis version) 0.9.25.0
I dont know maybe i amde something wrong but i think the speed choice and simulation all of these were not there for some reason which if didnt happen i wouldnt hard bricked my phone anyways......should have kept 5.1 lollipop was very good faster than 6.0!!
Please Help...!
Same problem as above mention..! :crying::crying:
Please give solutions on this problem and thanks in advance.
--Flashtool use (Flashtool_0.9.25.0)
When connected to PC the phone with red light and turns on/off every 15 to 20 seconds.
Flashtool messages:
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
Hoping to have solutions on this problem.
I just want to save my device, thanks a lot...!
Jeorge01 said:
Same problem as above mention..! :crying::crying:
Please give solutions on this problem and thanks in advance.
--Flashtool use (Flashtool_0.9.25.0)
When connected to PC the phone with red light and turns on/off every 15 to 20 seconds.
Flashtool messages:
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
-- Device connected with USB debugging off
-- For 2011 devices line, be sure you are not in MTP mode
-- Device disconnected
Hoping to have solutions on this problem.
I just want to save my device, thanks a lot...!
Click to expand...
Click to collapse
There's no known solution to that.
On the same Flashtool website it clarifies that you should not use it if you own a C4/C5 Ultra or you will have hardbrick
Hello,
I think i bricked my phone.
I unlocked the bootloader with ADB and then was trying to flash CWM for rooting the device, and after ADB told me that it was flashed succesfully, i rebooted my phone and now is stuck on Archos logo. Bootloop, the phone is detected by my pc, because you can hear the sound when u pin the usb, but i don't have access to it. Windows says there's a problem with this device and can't recognize it.
However, now it's not even bootloop anymore, the phonte screen just turned black, no more bootloop, no more vibration, no more nothing. The only thing is this windows sound when plug in the phone.
Actually, i try to fix it with SP Flashtool, but i'll be thankful if anyone helps.
Have a nice day.
#Edit: Archos 55 Helium
lengockhanhhai said:
Me too.help plz
Click to expand...
Click to collapse
??
up
up
help pleas, it's really important
UP
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Augustoandro said:
Did you try leaving the phone on until the battery drains out? Worked for me once.
---------- Post added at 08:58 PM ---------- Previous post was at 08:54 PM ----------
If it doesn't work, try flashing the stock recovery for your phone using adb. I hope you took a backup of it, but if not, begin searching the web for it.
Does your phone has a forum of its own on XDA?
If yes, you may ask there for the stock recovery.
Click to expand...
Click to collapse
Hey and thank's for your reply,
The battery is already drained out, but nothings changed.
Also, how can i flash a stock recovery if adb and fastboot doesn not even recognize my phone right now? I have a recovery and stock rom, but no utility to flasht them.
SP Flashtool started to do the job, but failed after with some errors messages :/
Also it doesn not have a XDA forum, it's a not-known yet brand.
Good afternoon, I have a g4 MOTO plus replica MT6580, was connected to flash without flash tool, and the process was halted, and now the flashtool not recognized anymore the device, but the device is recognized by the usb when plugged.
Sorry my bad english.
Which flashtool were you using? Is your phone still working or is it bricked?
Augustoandro said:
Which flashtool were you using? Is your phone still working or is it bricked?
Click to expand...
Click to collapse
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Try keeping the phone on until the battery drains out, I was stuck on a similar situation once.
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
yurisalt said:
I was using Pack-Flashtool-v5.1640.00.000, already tried with 5.17 as well.
The phone does not turn on, does not appear to be charging.
Only the computer recognizes it, when I try to use the flashtool again presents me with a lot of errors, which I did not give before, it's just the red bar.
Click to expand...
Click to collapse
Try keeping the phone on until battery drains out, I was in a similar situation once.
So i have a Sony Xperia XZ3 Dual. I have now fixed the corrupted thing. But my Camera wont work only if i use VIDEO! So what have i missed?
I have download another ROM from a dude its like 2.6gb the one i have now is 2.4. Shall i replace it and how do i do it? If not, what shall i do to make the camera work.
fix your device
Hi, welcome to xda Developers
I need your phone model. This can be found in the device's About Phone menu
After that download the flashtool. I hope that you have already downloaded it. Launch it and then select xperifirm
Select your device and your device model and then download the firmware for your phone, press the firmware version button. After the firmware has been downloaded, close xpreifirm, FlashToll will ask you to select the downloaded firmware. Press ok . Next press the lightning button.
Select SONY Xperia XZ3 phone model and model number of your phone, firmware customization and firmware version the one you've downloaded in step No. 7.
12. Next check userdata, cust-reset everything else must be unchecked.
13. When you're ready press Flash button.
14. Connect turned off Xperia XZ3 phone to USB cable with pressed volume down button.
15. Release volume down button when you see "Device connected in flash mode" information in FlashTool windows log.The flash process starts, now just wait until process end.
hi mohammed
I have Sony Xperia XZ3 DUAL H9436. ? Can u might REMOTE my computer and help me that way through skype or something? cause im not that high tech of flashtools
I will wait for you to replay so i dont **** my phone again .
Update: So in FLASHTOOL64 i select the firmware i have downloaded but nothing happening?
Update: Sony mobile flasher dont have my Phone! highest is H8 in the XZ3 sektion hmm.
fix your device
You have to select Sony Xperia XZ3 Dual in the options because every single or dual sim model has a different model
After selecting your phone download the rom and flash it to your phone
Back up your data first because this update will delete your data
hi
Hi again, like i said : My phone dont comes up in flashtool the newest is sony xperia XZ3 dual H8XX and thats wrong? :s
The last option is to connect to your computer through teamviewer
Install teamviewer in your computer and send me your partner ID
After that you have to keep teamviewer open and wait for a black screen on your computer
If it is a black screen then i have connected to your computer. After that I will take care of the rest of the things
If you want I can also install Android Q on your phone because it is supported
hi again
teamviewer id -> 1 350 116 815 password: x97vt3
why did you close the connection
Are you back
If you are we may proceed to fix your https://forum.xda-cdn.com/images/icons/advanced/phone.png
Your Teamviewer password?
---------- Post added at 12:19 PM ---------- Previous post was at 11:31 AM ----------
Where are you
I have to go now
So you don't need me now
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
Because I found a rooting method for your phone
muhammad42620 said:
So you don't need me now
---------- Post added at 06:08 AM ---------- Previous post was at 06:07 AM ----------
Because I found a rooting method for your phone
Click to expand...
Click to collapse
First one is Magisk zip file and second is Magisk Manager