Hi,
I'm new here, just made an account. I have a question about my new Honor 5X, received today. Just a lot of value for money, very happy with it. But I have a question and I hope this forum can help me.
When I put my phone down, on a table or something, I hear a clicking sound at the top of the phone (at the moment when the phone touches the table). Also, when I tap at the top of the phone, I hear the same clicking sound. It seems like something is moving/loose at the top of the phone. It's clearly audible.
I've been watching around for a few moments today and found some other forums where they told it's connected to the camera of the phone and it's normal. But they also said it normally disappears when the camera is in use. I also tried this, but it doesn't disappear when the camera (front or back) is in use. I know you can't use both camera's at the same time, but I'm not convinced.
So my question to you all: Do you hear the same thing as I do? Can you reconstruct this (so it's normal for this phone)?
Thank you for helping!
P.S.: English is not my native language, so apologies for the spelling.
Artois89 said:
Hi,
I'm new here, just made an account. I have a question about my new Honor 5X, received today. Just a lot of value for money, very happy with it. But I have a question and I hope this forum can help me.
When I put my phone down, on a table or something, I hear a clicking sound at the top of the phone (at the moment when the phone touches the table). Also, when I tap at the top of the phone, I hear the same clicking sound. It seems like something is moving/loose at the top of the phone. It's clearly audible.
I've been watching around for a few moments today and found some other forums where they told it's connected to the camera of the phone and it's normal. But they also said it normally disappears when the camera is in use. I also tried this, but it doesn't disappear when the camera (front or back) is in use. I know you can't use both camera's at the same time, but I'm not convinced.
So my question to you all: Do you hear the same thing as I do? Can you reconstruct this (so it's normal for this phone)?
Thank you for helping!
P.S.: English is not my native language, so apologies for the spelling.
Click to expand...
Click to collapse
It is the Camera they all do it to some extent. My HTC M7 did the same thing, nothing to be worried about.
Yes, mine does that too. I think it is either the vibration motor or some camera component. Other causes could be a flex cable since the speaker is up there too or the plastic protector.
It is almost not noticable but it has been doing it since the start and hasn't caused any issues as far as I can tell. It also didn't get worse here, just remained the same.
I wouldn't worry about it too much!
Yes Mine too. Its the Focus sound.
Gesendet von meinem KIW-L21 mit Tapatalk
Pain_Deluxe said:
Yes Mine too. Its the Focus sound.
Gesendet von meinem KIW-L21 mit Tapatalk
Click to expand...
Click to collapse
How can it focus when the mobile is not in use !
Its the sound of camera part touching the table.
See on my own thread thats defenetly a problem.
Sorry for that
Gesendet von meinem SM-G900F mit Tapatalk
Yup same here, when i open snapchat most of the time it starts to focus, and that where the clicks appear
This is manufacturing fault of 5x. Every 5x device have this problem in every corner in the world.. Maybe camera or any other hardware part clicky sound
Sent from my KIW-L21 using Tapatalk
Yeah honor write this too to me today.
Too late my shipper send me a new one
Gesendet von meinem SM-G900F mit Tapatalk
Related
Is there soulution? I simply want to use registered NFC tags in situations, when i cannot use phone normally...
I'm so with you on that one...
Gesendet von meinem GT-I9300 mit Tapatalk 2
nobody who could help here?
Should work no problem. I wrote a couple tags and my buddy was able to read them on his locked GNex. Unless I totally misunderstood what your asking
sent from my GummyROM'd Prime
hehe... yeah, it was possible before but i think they changed it starting with ICS, and thats the problem
flolee said:
hehe... yeah, it was possible before but i think they changed it starting with ICS, and thats the problem
Click to expand...
Click to collapse
Just 4.0.2 and earlier. I believe 4.0.4 is all gravy!
sent from my Galaxy S III
thx man, hmm... now that's weird, i'm on 4.0.4 (the omega rom) and with the S3 there is no chance to read a tag if the device is locked
can somebody confirm this? maybe i should consider a full wipe then
flolee said:
thx man, hmm... now that's weird, i'm on 4.0.4 (the omega rom) and with the S3 there is no chance to read a tag if the device is locked
can somebody confirm this? maybe i should consider a full wipe then
Click to expand...
Click to collapse
Well I'm unlocked so I can't confirm that its a lock issue It very well could be but I have no idea how that works. .. full wipes don't hurt. Just sucks setting everything up again is all.
sent from my Galaxy S III
Coreym said:
Well I'm unlocked so I can't confirm that its a lock issue It very well could be but I have no idea how that works. .. full wipes don't hurt. Just sucks setting everything up again is all.
sent from my Galaxy S III
Click to expand...
Click to collapse
I think op means when the screen lock is on.. Not rooting or sim locked
The phone wont read a tag until the phone is turned on and screen unlocked
I guess its to save power
Do you maybe have a lock pattern or something similar enabled, would make sense to me if it doesn't work with such a feature activated.
Because with the swype to unlock you are i.e. also able to pull notifications down while the screen is locked, with a security lock activated you aren't.
Gesendet von meinem GT-I9300 mit Tapatalk 2
In my case I just have the swipe to unlock
But until unlocked you can not scan nfc
Sent from my GT-I9300 using xda premium
Thx guys for all your answers.
Of course the problem is the locked screen and not any sim lock.
I understand that it does kinda make sense not to accept NFC connections as long as the phone is locked. However, personally I would still prefer to use NFC also if the phone is locked (as it was possible before) - and i think I'm not alone with this.
Looks like you have to play around with your rom to get it working again - the sad part is, I have no clue where to start (well, actually I have no clue at all).
Gesendet von meinem GT-I9300 mit Tapatalk 2
searley said:
I think op means when the screen lock is on.. Not rooting or sim locked
The phone wont read a tag until the phone is turned on and screen unlocked
I guess its to save power
Click to expand...
Click to collapse
Ahh.. yeah that makes more sense lol sometimes I overlook the simplist of ****!
sent from my Galaxy S III
one more doubt with NFC unlock
I've one doubt regarding NFC screen unlock.. I'm worried that I'm giving more pressure to my Nexus S power button . Suppose if I can have a NFC tag which will simply light up the screen when placed on it, On my screen I can have pattern lock /password lock.. so it will be secured, I just want to bypass pressing Power button all the time to check what is happening inside my mobile ( with out rooting and key remap )
I understand why NFC is disabled when locked from a security perspective, especially with things like Google Wallet - someone could buy things with your phone without knowing the PIN.
However I am not using NFC payments and would really like to have the ability to switch profiles by NFC tags. The problem is the convenience of this is somewhat reduced by having to unlock the phone. If it could just be enabled when the screen is on that would not be so bad on the battery.
I know a few months back Paul O'Brien was talking about looking at a hack for this, I don't think he has yet (or will ever have the time). It is not on the new GNex MoDaCo kitchen (IR14). N.B. I did have a GNex before swapping for the wife's new S3
Take a look at the development section, there is already a solution for rooted phones.
Gesendet von meinem GT-I9300 mit Tapatalk 2
flolee said:
Take a look at the development section, there is already a solution for rooted phones.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
There wasn't when this thread was created I don't think
sent from my Galaxy S III
true, the solution is only a few days old - but this was just an information for TwoGunTurtle and all the others in this thread, who have not yet seen the thread in the development section.
You are looking at about 5 milliamps when the NFC is ready to read.
Whilst it's a only a very small drain if you had it drawing that all the time, you may find your battery starts to suffer. That's about 400 Hours on the 2100 mAH battery, assuming nothing else is drawing power.
Although I worked it out at only an extra 9 ish hours off the standby time assuming the phone does 200 Hours in stanby @ 10.5mA + 5mA for the NFC chip = 11mA - 2100mAh / 11mA = 190.90 Hours
So not a great loss, but you also have security to think of I guess, if your phone is always able to communicate via NFC you open yourself up to fly-by attacks (not that this kind of thing happens....yet).
Logicalstep
I had a problem with my old phone, I gave it to customer support and now got it back after 3 months with a note saying it got switched with a "new" one. Checked the imei number and it is a different one.
What puzzles me is, my old phone had some pretty big scratches on the display and the body and this one has exactly the same scratches! As I don't think they added the scratches on purpose so I don't miss them, I thought maybe they somehow built a new phone into my phones body?? I am quite confused.
But, even more confusing is: the "new" phone has exactly the same problem as the one I sent in! (screen not turning in after standby)
So I am guessing they are trying to trick me as I have no idea how else this can be.
My question now is: how did they change the imei? Did they really just switch a part? Is there a way to change the imei of a phone??
Gesendet von meinem LT26i
The imeid is stored in the phone's memory. For example, on an HTC Desire S it's in partition mmcblk0p7. So it's fairly easy to overwrite if you know where it is found.
Sent from my Nexus 7
BillGoss said:
The imeid is stored in the phone's memory. For example, on an HTC Desire S it's in partition mmcblk0p7. So it's fairly easy to overwrite if you know where it is found.
Sent from my Nexus 7
Click to expand...
Click to collapse
So do you think they just changed it and are now telling me they switched it or is it possible that they just changed a part ( motherboard maybe) and that changed the number?
I just want to know if they are trying to fool me
Gesendet von meinem LT26i
If the scratches are the same and the problem persists, they probably just reflashed the memory or something.
seeeeew said:
If the scratches are the same and the problem persists, they probably just reflashed the memory or something.
Click to expand...
Click to collapse
Does that change the imei?
They are claiming they switched the whole phone. I guess it's time to pay the store a visit -.-
Gesendet von meinem LT26i
Changing the IMEI is illegal in most countries in the world and i guess that they could change it by tampering with the memory chip.You should go back to the store and...explain them a few things.
Sent from my LG-P350 using xda premium
Hi guys,
I noticed something the other day. Sometimes, when i use let's say whatsapp for 10 or 15 minutes and look to the screen, I can clearly see my keyboard as ghosting on my screen. As much as I know, there is no burn-ins in LCD panels. So i guess it's image sticking. Again, as much as I know and learnt from some engineers(who are working in lcd panels department of the factory I work in) image sticking in a high quality panel is not common. They said it can be a factory defect. They said it can be a software problem also, as LG is known with its high quality panels. What do you guys think ?
I can't get it to the LG service because I bought this phone from Poland when I was in Erasmus exchange and I came back to my country. I wrote to LG Turkey, they said talk with LG Poland. I did it and Polish guys said contact with your local LG. I'm trying to figure it out with e-mails. So any of you guys have suggestions, it's much appreciated.
Thanks
Nobody have nothing to say ?
Out of interest i would ask for a picture/short Video, but that wont help you
I would tell both that you are beging directed back and forth between turkey and poland and if they dont work something out they should contact each other.
Gesendet von meinem A0001 mit Tapatalk
I've contacted with LG Turkey again. And the guy was like a robot who programmed to say "We don't give warranty for the phones bought out of Turkey" and "We don't have global warranty". Is there anything like International LG office or something ? I don't think LG Turkey would move a finger for me.
What dies LG poland respond when you say that LG turkey dies give a **** about it?
Gesendet von meinem A0001 mit Tapatalk
---------- Post added at 08:13 AM ---------- Previous post was at 08:12 AM ----------
What does LG poland respond when you say that LG turkey dies give a **** about it?
Gesendet von meinem A0001 mit Tapatalk
---------- Post added at 08:15 AM ---------- Previous post was at 08:13 AM ----------
Otherwise you could try to contact the store you bought your device in
Gesendet von meinem A0001 mit Tapatalk
I'm still waiting for an answer from LG Poland. But I guess they'll say the same. I'll try to contact Saturn Polska(the store I bought my phone from). Let's hear what do they have to say
I have the same problem, but i haven't contact lg. I also have a stuck pixel.
swimmer_tr said:
Hi guys,
I noticed something the other day. Sometimes, when i use let's say whatsapp for 10 or 15 minutes and look to the screen, I can clearly see my keyboard as ghosting on my screen. As much as I know, there is no burn-ins in LCD panels. So i guess it's image sticking. Again, as much as I know and learnt from some engineers(who are working in lcd panels department of the factory I work in) image sticking in a high quality panel is not common. They said it can be a factory defect. They said it can be a software problem also, as LG is known with its high quality panels. What do you guys think ?
I can't get it to the LG service because I bought this phone from Poland when I was in Erasmus exchange and I came back to my country. I wrote to LG Turkey, they said talk with LG Poland. I did it and Polish guys said contact with your local LG. I'm trying to figure it out with e-mails. So any of you guys have suggestions, it's much appreciated.
Thanks
Click to expand...
Click to collapse
I've noticed this but after screen has been turned off for 4 or 5 minutes it goes.. Not really an issue to me. Others maybe more so.
There is no problem with LG turkey, just say you will pay for it, warranty is out of the question, just like samsung, sony etc, they are regional warranty only, they do not provide international warranty. contact the seller, and next time buy the unit which is registered within the same country, that way you will get local warranty.
swimmer_tr said:
Hi guys,
I noticed something the other day. Sometimes, when i use let's say whatsapp for 10 or 15 minutes and look to the screen, I can clearly see my keyboard as ghosting on my screen. As much as I know, there is no burn-ins in LCD panels. So i guess it's image sticking. Again, as much as I know and learnt from some engineers(who are working in lcd panels department of the factory I work in) image sticking in a high quality panel is not common. They said it can be a factory defect. They said it can be a software problem also, as LG is known with its high quality panels. What do you guys think ?
I can't get it to the LG service because I bought this phone from Poland when I was in Erasmus exchange and I came back to my country. I wrote to LG Turkey, they said talk with LG Poland. I did it and Polish guys said contact with your local LG. I'm trying to figure it out with e-mails. So any of you guys have suggestions, it's much appreciated.
Thanks
Click to expand...
Click to collapse
Seems to be a arising issue in lg. The g4 has many claims of ghosting.
Hi guys,
I installed a version of MIUI on my le max 2 and after a few tests my device ended up dying.
I used the unbrick process from unbrick android guides.
After restoring the QFyl version my device had a problem on the screen. The screen is divided and the beginning of the screen is in the middle of the device.
I'm new to device modifications, do you have any idea what might have happened?
Seems display died, is it also much slower? Had same issue with my x800us
Gesendet von meinem Le X820 mit Tapatalk
mame76 said:
Seems display died, is it also much slower? Had same issue with my x800us
Gesendet von meinem Le X820 mit Tapatalk
Click to expand...
Click to collapse
In fact the screen remains fluid using the EUI, using cyanogem and mookie it is slower.
I found a rotation change tutorial and thought it was some change in build.prop, but I could not find any properties for it.
I took a print from my phone and seeing the image shows that the screen is normal.
I believe it's something related to the software, but I have no idea what it is.
From your other device I changed the screen and it returned to normal?
SolecAsses said:
In fact the screen remains fluid using the EUI, using cyanogem and mookie it is slower.
I found a rotation change tutorial and thought it was some change in build.prop, but I could not find any properties for it.
I took a print from my phone and seeing the image shows that the screen is normal.
I believe it's something related to the software, but I have no idea what it is.
From your other device I changed the screen and it returned to normal?
Click to expand...
Click to collapse
Still waiting for the new display ?
mame76 said:
Seems display died, is it also much slower? Had same issue with my x800us
Gesendet von meinem Le X820 mit Tapatalk
Click to expand...
Click to collapse
mame76 said:
Still waiting for the new display ?
Click to expand...
Click to collapse
I still believe the problem is software.
When you change the screen, let the problem be corrected.
Tks!
SolecAsses said:
I still believe the problem is software.
When you change the screen, let the problem be corrected.
Tks!
Click to expand...
Click to collapse
Display arrived, issue is gone. Check if you have such flickering within the recovery too, I had it here as well but not so much. Removing was quite easy with razor blade as shown on YouTube videos.
SolecAsses said:
Hi guys,
I installed a version of MIUI on my le max 2 and after a few tests my device ended up dying.
I used the unbrick process from unbrick android guides.
After restoring the QFyl version my device had a problem on the screen. The screen is divided and the beginning of the screen is in the middle of the device.
I'm new to device modifications, do you have any idea what might have happened?
Click to expand...
Click to collapse
This method worked for me. Magic Follow those steps:
https://forum.xda-developers.com/showpost.php?p=70252527&postcount=2
Today I updated my Stratos to 2 3.8. the top and bottom button stop working. Don't scroll ..
Any one some problems ?
Sent from my ONEPLUS A3003 using Tapatalk
hugonv said:
Today I updated my Stratos to 2 3.8. the top and bottom button stop working. Don't scroll ..
Any one some problems ?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
it's not a bug, it's a new "feature" from Huami.
Check for my thread and see if you match the requirements in order to fix it.
hugonv said:
Today I updated my Stratos to 2 3.8. the top and bottom button stop working. Don't scroll ..
Any one some problems ?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=78686911&postcount=3
same here, was on official not modified fw before this one. now the upper and lower buttons do nothing as they did... The upper one sends me to the last item on the list, while the lower one does really nothing at all..
I wish I have not updated...
Fevves said:
same here, was on official not modified fw before this one. now the upper and lower buttons do nothing as they did... The upper one sends me to the last item on the list, while the lower one does really nothing at all..
I wish I have not updated...
Click to expand...
Click to collapse
You can skip update for a while and eventually will bother you so much, that you will just update to get rid of it. Yeah, I hate aggressive update policy.
Zeljko1234 said:
You can skip update for a while and eventually will bother you so much, that you will just update to get rid of it. Yeah, I hate aggressive update policy.
Click to expand...
Click to collapse
Well, with @Saratoga79 guidance all is (almost) back to normal. few clicks are different but hey, the old bitton layout and functionality is still there. Much appreciated such quick resolution and utmost appreciated commitment by @Saratoga79. As for wherethis one is going... it almost seem they built this ver for Pace and not for Stratos...
Btw, my watch seems faster and snappier now... not a placebo as far as I can tell.
Don't kill me, but so far I like new buttons mapping
I reported this new "feature" as a bug. I unable to control watches :/
peca_007 said:
I reported this new "feature" as a bug. I unable to control watches :/
Click to expand...
Click to collapse
the same here....cant navigate from options with this new mapping
Hi where can i find the thread / fix for this?