Has anyone snagged the ota yet. If so can someone upload so I can get a ROM going? I havent gotten it on my M8 yet...
Thanks in advance.
WNC
I have a completely stock att m8. Not rooted, s-on.
It keeps failing on the update. Getting this message.
E: missing bitmap oem_unlock_bg
(Code -1)
E: missing bitmap oem_unlock_bg_yes
(Code -1)
E: missing bitmap oem_unlock_bg_no
(Code -1)
E: find no match PARTITION: for package path @/cache/recover/block.map
Finding update package...
Opening update package...
E: failed to map file.
Installation aborted.
Anyone have a solution for this?
Can you get the file and post it
chevyjohn01 said:
I have a completely stock att m8. Not rooted, s-on.
It keeps failing on the update. Getting this message.
E: missing bitmap oem_unlock_bg
(Code -1)
E: missing bitmap oem_unlock_bg_yes
(Code -1)
E: missing bitmap oem_unlock_bg_no
(Code -1)
E: find no match PARTITION: for package path @/cache/recover/block.map
Finding update package...
Opening update package...
E: failed to map file.
Installation aborted.
Anyone have a solution for this?
Click to expand...
Click to collapse
Same thing here. Completely stock and AT&T figures out how to screw things up. Do they even test this crap? This is the 4th time downloading too.
I can post it a little later. My phone downloaded it this morning, but because I have root and custom recovery I don't want to install it as OTA. What folder would it be stored in? According to disk usage it is under HTCDM and its about 1GB but I can't find it in ES File Explorer.
Sent from my HTC One_M8 using XDA Free mobile app
I would think in esfile explorer enable show hidden files it may show up...
footbal9584 said:
I can post it a little later. My phone downloaded it this morning, but because I have root and custom recovery I don't want to install it as OTA. What folder would it be stored in? According to disk usage it is under HTCDM and its about 1GB but I can't find it in ES File Explorer.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I had to flash the ruu,take the ota's (pre-marshmellow update needed) and then take the 1gb update...Dont think can be rooted to take ota (rooted part just an fyi). And side thought.. were you guys getting the error on 502.8 build?
theandies said:
Same thing here. Completely stock and AT&T figures out how to screw things up. Do they even test this crap? This is the 4th time downloading too.
Click to expand...
Click to collapse
I found it. I just did a search for a files over 512MB. I'll upload it when I get home.
Side thought what are the side effects of flashing the zip through TWRP?
Sent from my HTC One_M8 using XDA Free mobile app
Not sure what build number. It's my wife's phone. The last update worked fine. It was the first of 2 for marshmallow that came out a few weeks ago. I'd like to try the ruu if it's available yet.
Wonders_Never_Cease said:
I had to flash the ruu,take the ota's (pre-marshmellow update needed) and then take the 1gb update...Dont think can be rooted to take ota (rooted part just an fyi). And side thought.. were you guys getting the error on 502.8 build?
Click to expand...
Click to collapse
No, that installed just fine.
Appreciated... Folks can use this...I just need firmware zip from within the ota file..shouldnt be very big...if can grab that I can get started on debloated ATT Builds...
footbal9584 said:
I found it. I just did a search for a files over 512MB. I'll upload it when I get home.
Side thought what are the side effects of flashing the zip through TWRP?
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Somethings getting corrupted somewhere...I reflash available ruu from htc site..take ota's in sequence and try again...mine installed fine
theandies said:
No, that installed just fine.
Click to expand...
Click to collapse
Here it is, sorry it took so long, my upload speed sucks
https://www.dropbox.com/s/vub4llaci5oyn3g/OTAPkg.zip?dl=0
Also here is just the Firmware.zip file
https://www.dropbox.com/s/y0ynanjmt6l9d40/firmware.zip?dl=0
First time in forever using the Desktop site, noticed my signature is waaaay out of date
Thankyou, Ill do my best to get something out to some testers...if interested anyone send me a p.m. to participate in ATT debloated build testing
footbal9584 said:
Here it is, sorry it took so long, my upload speed sucks
https://www.dropbox.com/s/vub4llaci5oyn3g/OTAPkg.zip?dl=0
Also here is just the Firmware.zip file
https://www.dropbox.com/s/y0ynanjmt6l9d40/firmware.zip?dl=0
First time in forever using the Desktop site, noticed my signature is waaaay out of date
Click to expand...
Click to collapse
The Marshmallow RUU has been posted: http://www.htc.com/us/support/htc-one-m8-att/news/
chevyjohn01 said:
I have a completely stock att m8. Not rooted, s-on.
It keeps failing on the update. Getting this message.
E: missing bitmap oem_unlock_bg
(Code -1)
E: missing bitmap oem_unlock_bg_yes
(Code -1)
E: missing bitmap oem_unlock_bg_no
(Code -1)
E: find no match PARTITION: for package path @/cache/recover/block.map
Finding update package...
Opening update package...
E: failed to map file.
Installation aborted.
Anyone have a solution for this?
Click to expand...
Click to collapse
Others have been reporting this error. Apparently you need a ridiculous amount of free storage space (>16 GB), to install this OTA: http://forum.xda-developers.com/htc-one-m8/help/att-htc-one-m8-marshamallow-update-t3378877
footbal9584 said:
Here it is, sorry it took so long, my upload speed sucks
Also here is just the Firmware.zip file
First time in forever using the Desktop site, noticed my signature is waaaay out of date
Click to expand...
Click to collapse
Hi, could you please share how to install this file since i'm newie. my phone is Rooted, S-On, with Stock Rom and when try to update through RUU (outside US) result in "software status: Modified
Unlocked s-on Security fail!"
Thanks in advance
I have error 155 when flashing the ruu, anyone?
did anyone found a solution for this issue? I am getting the exact same error on HTC M8 (stock ATT)
I swear i will not buy any phone from htc that associates with AT&T
Related
hii, i need your help please =[
sorry but my english is no good..
if somebody talk spanish let me know please
when i try to install a rom
amons-ra-eris recovery say:
Finding Update Package...
Opening Update Package...
Verifying Update Package...
Installing Update...
Formatting SYSTEM...
Copying Files...
E:Can't symlink /system/xbin/arp
E:Failure at line 65:
symlink /system/xbin/busybox SYSTEM:xbin/arp
Installation aborted
if i try install the 2.1 leak,[from hboot] say:
parsing...[SD ZIP]
[1] USERDATA - OK
[2] SYSTEM - FAIL-PU
[3] RECOVERY - OK
[4] RADIO_V2 - OK
[5] BOOT - FAIL-PU
Partition update fail
update fail
and this is my info [hboot]
PB00100 XC ENG S-OFF
HBOOT-1.49.2000 (PB0010000)
MICROP-0111
TOUCH PANEL-MELFAS_45_17
JAN 24 2010,22:35:57
i dont have OS in my droid eris, i cant install a rom
i use fastboot to flash the amons-ra-eris recovery
and i try to flash *system* with fastboot
fastboot flash system system.img
but say
c:\android-sdk-windows\tools>fastboot flash system system.img
sending 'system' (146796 KB)... FAILED (remote: data length is too large)
and i try to install boot.img too and say
c:\android-sdk-windows\tools>fastboot flash boot boot.img
sending 'boot' (2200 KB)... OKAY
writing 'boot' ... FAILED (remote: image update error)
SORRY I DONT SPEACK ENGLISH =[
but please help meh
ojala que me puedan ayudar
se los agradeceria mucho
Try downloading a different ROM, wipe data and dalvik, and flash it via Amon_Ra's recovery.
sounds like corrupted files - did you open the zip files before placing on the sd card? you may have broken the signature on those files. try downloading again. do not open the zip files, just transfer them to the sd card and try flashing again.
gnarlyc said:
Try downloading a different ROM, wipe data and dalvik, and flash it via Amon_Ra's recovery.
Click to expand...
Click to collapse
i download a different rom [EVILERIS4.0]
i do a wipe [factory reset / dalvik, etc]
when i try flash the rom say [in Amon-Ra's recovery]
Finding Update Package...
Opening Update Package...
Verifying Update Package...
Installing Update...
Formatting SYSTEM...
Copying Files...
E:Can't symlink /system/xbin/zcip
E:Failure at line 11:
symlink ./busybox SYSTEM:xbin/zcip
Installation aborted
the line now is 11...
in the other rom the line is 68..
Jp50 said:
sounds like corrupted files - did you open the zip files before placing on the sd card? you may have broken the signature on those files. try downloading again. do not open the zip files, just transfer them to the sd card and try flashing again.
Click to expand...
Click to collapse
read up
now i didnt open the zip files before placing on the sd card
and the error is in the another line...
thanx for your help.
l3nytm said:
i download a different rom [EVILERIS4.0]
i do a wipe [factory reset / dalvik, etc]
when i try flash the rom say [in Amon-Ra's recovery]
Finding Update Package...
Opening Update Package...
Verifying Update Package...
Installing Update...
Formatting SYSTEM...
Copying Files...
E:Can't symlink /system/xbin/zcip
E:Failure at line 11:
symlink ./busybox SYSTEM:xbin/zcip
Installation aborted
the line now is 11...
in the other rom the line is 68..
read up
now i didnt open the zip files before placing on the sd card
and the error is in the another line...
thanx for your help.
Click to expand...
Click to collapse
What OS are you running and what browser are you using? I know for a fact Safari on a Mac causes the signature to break. I always recommend Firefox when downloading these files, and saving the file as target. Not opening and extracting.
jsuh said:
What OS are you running and what browser are you using? I know for a fact Safari on a Mac causes the signature to break. I always recommend Firefox when downloading these files, and saving the file as target. Not opening and extracting.
Click to expand...
Click to collapse
im running windows xp and i use google chrome
maybe my usb cable may be damaged or something?
or my OS can be a problem?
l3nytm said:
im running windows xp and i use google chrome
maybe my usb cable may be damaged or something?
or my OS can be a problem?
Click to expand...
Click to collapse
Just try using another browser. Download and install Firefox if you don't have it and replace the zip with the one you downloaded with Firefox.
Make sure you're downloading it from a legit source, too.
Google Chrome!!!!
Google Chrome is great, I use it and love it, but using Google Chrome it's always good to check your md5sums, well it's always good to check them regardless, but Google Chrome is known to have issues with corrupting files during download.. Do what he said and try downloading another browser, that should do the trick!! Sounds like amon RA is doing it's thing, and you are s=off so you are in pretty good shape, it has to be the browser deal I think.. Good luck dude, let us know!!
jsuh said:
Just try using another browser. Download and install Firefox if you don't have it and replace the zip with the one you downloaded with Firefox.
Make sure you're downloading it from a legit source, too.
Click to expand...
Click to collapse
DroidVicious said:
Google Chrome is great, I use it and love it, but using Google Chrome it's always good to check your md5sums, well it's always good to check them regardless, but Google Chrome is known to have issues with corrupting files during download.. Do what he said and try downloading another browser, that should do the trick!! Sounds like amon RA is doing it's thing, and you are s=off so you are in pretty good shape, it has to be the browser deal I think.. Good luck dude, let us know!!
Click to expand...
Click to collapse
i download the rom witch firefox
and the results are the same
i download ther rom from here XDA
Are you positive you're not extracting or opening the files? It really is unlikely to get that many bad downloads.
Again, do not open or extract the zip file. Leave it intact.
Jp50 said:
Are you positive you're not extracting or opening the files? It really is unlikely to get that many bad downloads.
Again, do not open or extract the zip file. Leave it intact.
Click to expand...
Click to collapse
i dont extract or open de zip file.. just i put on sd card and flash an i get that error.
Finding Update Package...
Opening Update Package...
Verifying Update Package...
Installing Update...
Formatting SYSTEM...
Copying Files...
E:Can't symlink /system/xbin/arp
E:Failure at line 65:
symlink /system/xbin/busybox SYSTEM:xbin/arp
Installation aborted
I know its a longshot, but I would try formatting ur sdcard.
Spencer_Moore said:
I know its a longshot, but I would try formatting ur sdcard.
Click to expand...
Click to collapse
format my sd with my pc?
You can format it from recovery.
Sent from my CELBfroyo 3.0 ERIS using XDA App
strongergravity said:
You can format it from recovery.
Sent from my CELBfroyo 3.0 ERIS using XDA App
Click to expand...
Click to collapse
how can i format my sd from the recovery?
l3nytm said:
how can i format my sd from the recovery?
Click to expand...
Click to collapse
Make sure and copy any pics or anything else you want to save (not the downloaded roms) to your computer first.
Choose "Partition" from amon_Ra's main menu and then I think it says
"Format". When it gives the option to set "swap size" use the trackball to set it to zero (0).
When it asks the size of the "ext2", set that to zero, too.
Sent from my Eris with xtrSENSE v4.6 Beta
roirraW "edor" ehT said:
Make sure and copy any pics or anything else you want to save (not the downloaded roms) to your computer first.
Choose "Partition" from amon_Ra's main menu and then I think it says
"Format". When it gives the option to set "swap size" use the trackball to set it to zero (0).
When it asks the size of the "ext2", set that to zero, too.
Sent from my Eris with xtrSENSE v4.6 Beta
Click to expand...
Click to collapse
ok
i format my sdcard with the recovery
but when i go to flash a rom say the same
=[
the problem continue =[
Do you check the MD5 sums? Check the file after you've copied it to the SD card. I recommend HashTab under Windows.
Sent from my Eris with xtrSENSE v4.6 Beta
roirraW "edor" ehT said:
Do you check the MD5 sums? Check the file after you've copied it to the SD card. I recommend HashTab under Windows.
Sent from my Eris with xtrSENSE v4.6 Beta
Click to expand...
Click to collapse
i compare and say its ok...
cm5 [pc]
A30160A7F30D414B83DDFD01E0DFC320
cm5 [sd]
A30160A7F30D414B83DDFD01E0DFC320
Do a test extract. On the PC and sdcard.
Sent from my ERIS using XDA App
Hey been on these forums forever since i was installing themes on my hp ipac or htc shadow. Not a noob by any meens. Been flashing android since my G1. Now that thats out of the way im trying to flash a ICS leak to mess with the webtop 3.0. I was coming from a stock/rooted .181...
1. I fastbooted to .181 using the droid razr 1.6 utility.
2. then i root using ICS installer Combo.
3. Next i use the ICS installer Combo to install the .79 leak.
4. allowed rom manager and su user permissions. i get an error that it can not mkdir to /sdcardEXT.. is this a normal error? Either way once the phone reboots it starts install but then gets the ! in the triangle and what i assume, fails and reverts back to .181.... What am i doing wrong iv been at it for like 3 hours and im pulling my hair out trying to figure out what im missing. My battery is at 40%, is that an issue? Assuming not since if i can fastboot to .181 i should be able to install .79
Hopefully this makes sense and thanks for taking a look
I had something similar to this happen to me when downgrading-rooting-upgrading my Transformer Prime. It failed the upgrade OTA part because I had modified the build.prop and that kept it from installing the upgrade and I got the ! triangle. Have you changed anything? Frozen any apps? Changed your build.prop from stock?
There is a directory you can look in for the log file of why it failed the upgrade. I think it is under /cache/recovery directory from root. (you have to be rooted to see it and use a root explorer). Open the log file and see why its failing.
Thanx for the quick reply. if memory serves me right i modified the build prop to mess with the s-voice app. so your saying fastbooting wouldnt restore this? if not i guess il have to figure out how i changed it and change it back before trying this install again
Well, I would have thought fastbooting would bring it to total stock, but I had made a change in my build.prop AFTER I had downgraded I believe. I think I would check that directory if you can /cache/recovery for the log file and see whats causing your failure specifically. Again, you'll need a good root explorer (like "Root Explorer") and make sure you have it do root so you can see the sub directories too. I was using ES Explorer and it was not seeing the /cache/recovery directory, just /cache and using Root Explorer showed me the sub folder.
PS> Changing your build.prop back to what it looked like before the change didn't work for me. I had to get a stock, unmodified build.prop form another user on here for it to work.
PPS> Why are you wanting to install the leak? Its pretty much been all but confirmed its happening OTA very soon.
Ok i checked out the build.prop alot of stuff in there but seems to all be correct.
I checked that log file and at the very bottom i get this.
Finding update package...
I:Update location: /cache//Blur_Version.6.12.181.XT912.Verizon.en.US.zip
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
E:failed to open /cache//Blur_Version.6.12.181.XT912.Verizon.en.US.zip (No such file or directory)
I:verify_file returned 1
E:signature verification failed
Installation aborted.
Have no idea what that means tho... If anyone needs the whole log to help me out let me know
Well, thats a lot different than what mine said so your problem is different, but I'm sure someone can help with that info. Heres what mine said when it was the build.prop:
file "/system/build.prop" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/build.prop"
etc...
Shinare said:
Well, thats a lot different than what mine said so your problem is different, but I'm sure someone can help with that info. Heres what mine said when it was the build.prop:
file "/system/build.prop" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/build.prop"
etc...
Click to expand...
Click to collapse
Yeah hopefully someone can, i mean with the ota around the corner this is not too big of an issue as long as it doesn't effect the official ota. Thanks for taking the time tho.
Well, the only other thing I can think of thats happened in the past is the wrong "region" file for the phone you are trying to update.
Like you are on US_ENG on your phone and you are trying to flash a WW_ENG or something so its not matching up? *shrug* just a blind guess. Hope someone can help you out.
This may or may not help, but I got that error back in the day flashing a ROM on my D2. In clockwork there was a option to disable and enable signature verification.
Or maybe the zip is messed up?
See the thing is i did this all through the guide in the dev section. i would have posted it there but i didnt have enough posts to post there, im more of a reader than a preacher. i only downloaded the 2 files with the 2 different batch scripts. 1 to fastboot to .181 and 1 to install ICS. Il figure it out eventually, but thanks guys. hopefully someone gets me there sooner.
**fixed it, i ended up using the permissions option in rom manager and also made sure the phone was over 50% and it worked so hopefully this helps soeone eles if they stumble across it.
"E: failed to verify whole-file signature" "E: signature verification failed" "installation aborted."
The message that is to give, everytime I try to apply the update
someone shed some light?
http://forum.xda-developers.com/showthread.php?t=1786107
Having applied the update by OTA3 recoverye to this Please try again.
I do all the procedures, and give error.
help
It's mean that the neccesary files had been changed, and it's stopped the updates. You should see which files that had been changed and get the replace it with the file from original stock. Typically the /system/build.prop; changed files or removed system files will interrupt the update.
Thank you.
bahathir said:
It's mean that the neccesary files had been changed, and it's stopped the updates. You should see which files that had been changed and get the replace it with the file from original stock. Typically the /system/build.prop; changed files or removed system files will interrupt the update.
Thank you.
Click to expand...
Click to collapse
How so? build.pro change?
I am applying the tutorial http://forum.xda-developers.com/showthread.php?t=1786107
can be more expecifico?...
weniton16 said:
How so? build.pro change?
I am applying the tutorial http://forum.xda-developers.com/showthread.php?t=1786107
can be more expecifico?...
Click to expand...
Click to collapse
Download the file I've published. The one you have is corrupted or wasn't downloaded from my thread.
Also, format your sdcard and try another computer. Your's may have a virus or a file verification app there's corrupting your files.
This have nothing to do with build.prop.
Cheers
pedrotorresfilho said:
Download the file I've published. The one you have is corrupted or wasn't downloaded from my thread.
Also, format your sdcard and try another computer. Your's may have a virus or a file verification app there's corrupting your files.
This have nothing to do with build.prop.
Cheers
Click to expand...
Click to collapse
What files? the start of the post? http://forum.xda-developers.com/showthread.php?t=1786107
The aqrquivos are apparently normal, until I open the winrar.E corrumpidos not seems to be corrupting
weniton16 said:
How so? build.pro change?
I am applying the tutorial http://forum.xda-developers.com/showthread.php?t=1786107
can be more expecifico?...
Click to expand...
Click to collapse
Hint : optimizer apps, bloatware removal apps which tampering or made changes in system partition.
Sent from my XT910 using xda app-developers app
have the same problem when im tryin'to install the new update for pshasia , i messed up with system files especifically WeatherWidget.apk u_u do i have to flash the stock ROM? or what are my options?
Anyone install this update? Is this the exynos fix? Is it hurting your battery life? International versions are claiming they are having battery issues with the update version they have recieved.
Sent from my SCH-I605 using xda premium
Please get the update zip or a logcat for me:
Code:
adb shell logcat > logcat.txt
Post it here.
adrynalyne said:
Please get the update zip or a logcat for me:
Code:
adb shell logcat > logcat.txt
Post it here.
Click to expand...
Click to collapse
Is that from a computer? I'm at work now no computer to use, and i already updated does that matter? Can I get direct from phone for you? If so how?
Sent from my SCH-I605 using xda premium
OK so found out its a change to add a boundary check routine to only allow applications to access the phones memory in specific areas. What ever that means
Sent from my SCH-I605 using xda premium
dawiseguy77 said:
OK so found out its a change to add a boundary check routine to only allow applications to access the phones memory in specific areas. What ever that means
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Could that be another defense against allowing access to google wallet?
---------- Post added at 07:33 PM ---------- Previous post was at 07:30 PM ----------
dawiseguy77 said:
Is that from a computer? I'm at work now no computer to use, and i already updated does that matter? Can I get direct from phone for you? If so how?
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Were you rooted before you updated your device?
Not rooted yet
Sent from my SCH-I605 using xda premium
Update failed
I was rooted and the update failed. Unrooted (saved root with Voodoo), and the update failed again... gotta check and see what I'm missing before I go to any more trouble
crcpeach said:
I was rooted and the update failed. Unrooted (saved root with Voodoo), and the update failed again... gotta check and see what I'm missing before I go to any more trouble
Click to expand...
Click to collapse
I just tried it. here was the log when flashing the update
updating partition details...
E: Invalid command argument
Installing zip file '/cache/fota/update.zip
Installing '/cache/fota/update.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
assert failed: getprop("ro.product.device") == "
getprop(ro.build.product" == "t01tevzw"
E: Error in /cache/fota/update.zip
(Status 7)
E: Error installing zip file '/cache/fota/update.
as it reset my phone, it opened up my Team Win Recovery attempted to install what ever it was it wanted to update, finished doing what it did and i had to click reboot from TW. phone rebooted and it came back with an update failed message and wanted to do it again, so i clicked defer for 5 days. In the system up[date the only thing i see for it was an error 410 code...
name of update is: update_SCH-I605_LJB_to_LL4
Rootkeeper worked
Was rooted and but saved root through voodoo. This update installed fine for me, let's see what happens.
Hi all. I have a US I535 Verizon S3 which I rooted when I got it and kept rooted through an update with Voodoo Rootkeeper. I have since temp unrooted and tried to apply the OTA update to 4.3 (I don't have time to wipe, install via recover, and put everything back) and the upgrade is failing to apply around 25% with this message found in /data/log/recovery_log.txt:
Installing update...
try_update_binary(path(/cache/fota/update.zip))
radio.diff not found
Register_libbootloader_updater Qcom msm8960
[DEBUG] setprocattrcon: open failed, errno=2
[DEBUG] setprocattrcon: open failed, errno=2
Verifying current system...
file "/system/csc/feature.xml" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
failed to stat "/data/.saved.file": No such file or directory
failed to load data file
script aborted: "/system/csc/feature.xml" has unexpected contents.
"/system/csc/feature.xml" has unexpected contents.
E :Error in /cache/fota/update.zip
(Status 7)
E:Error in /cache/fota/update.zip
(Status 7)
FOTA_update_success_log_result()
Update Fail. File is written. status = 7
Installation aborted.
Does anyone know how to correct this either by updating the xml file or fixing whatever may be the "true cause" of that error?
UPDATE: I remembered thanks to an old post on xda:
Luckily I recovered root on my Vzw S3 after the 4.1.1 OTA. I discovered that you can move GPS/BT toggle widgets to /system/app/ and it no longer asks for confirmations. Super fast toggles with no hassle! There's a small app in the Play store called "/system/app mover" to do it.
Click to expand...
Click to collapse
Would that be detected and block the update? I'm going to use TiBU to convert Power Toggles back to a user app and see if that gives me the green light, but it doesn't seem like it would be related to the xml error.
Thanks a bunch!
my /ssyte/csc/feature.xml (4.1.2)
CPngN said:
Hi all. I have a US I535 Verizon S3 which I rooted when I got it and kept rooted through an with Voodoo Rootkeeper. I have since temp unrooted and tried to apply the to . (I don't have time to wipe, install via recover, and put everything back) and the is failing to apply around 25% with this message found in /data/log/recovery_log.txt:
Click to expand...
Click to collapse
Here's the text of my /system/csc/feature.xml that the is complaining about:
http://pastie.org/private/8argqzzxwlgafxfceuhepq
Thanks all