hi i screwed up instilling malaysk rom 1024x600 on my kld2 rk3188 when i really needed to instill malaysk 800x480. i have not bricked the unit but i can not get it to take the correct file.
all it keeps saying is cant open /mnt/sd_storage/update.img
can not found firmware image or invalid image
update rkimage compete
installlation rkimage aborted
installation mcucfg start
installation mcucfg aborted
installation keycfg start
installation mcukey aborted.
is there a way to flash twrp thur the recover? maybe that would work better? idk i should not have even touch it
idk what i am doing wrong. i do remember doing this before by accident and i found some firmware that was on the google drives that was in 1st page of the thread. the worked great but i see there is no longer a google drives link anymore...
goodboyz358 said:
hi i screwed up instilling malaysk rom 1024x600 on my kld2 rk3188 when i really needed to instill malaysk 800x480. i have not bricked the unit but i can not get it to take the correct file.
all it keeps saying is cant open /mnt/sd_storage/update.img
can not found firmware image or invalid image
update rkimage compete
installlation rkimage aborted
installation mcucfg start
installation mcucfg aborted
installation keycfg start
installation mcukey aborted.
is there a way to flash twrp thur the recover? maybe that would work better? idk i should not have even touch it
idk what i am doing wrong. i do remember doing this before by accident and i found some firmware that was on the google drives that was in 1st page of the thread. the worked great but i see there is no longer a google drives link anymore...
Click to expand...
Click to collapse
I am guessing you have already done clear data and cache before trying to install the correct rom? Maybe send Malaysk a pm, I am sure he would be happy to advise!
goodboyz358 said:
hi i screwed up instilling malaysk rom 1024x600 on my kld2 rk3188 when i really needed to instill malaysk 800x480. i have not bricked the unit but i can not get it to take the correct file.
all it keeps saying is cant open /mnt/sd_storage/update.img
can not found firmware image or invalid image
update rkimage compete
installlation rkimage aborted
installation mcucfg start
installation mcucfg aborted
installation keycfg start
installation mcukey aborted.
is there a way to flash twrp thur the recover? maybe that would work better? idk i should not have even touch it
idk what i am doing wrong. i do remember doing this before by accident and i found some firmware that was on the google drives that was in 1st page of the thread. the worked great but i see there is no longer a google drives link anymore...
Click to expand...
Click to collapse
I can fix it?
I can think the same problem, mine is 800x480 RK3066
I hAVE THE SAME PROBLEM DID YOU NEVER SOLVE IT?
Cheapskatz said:
I hAVE THE SAME PROBLEM DID YOU NEVER SOLVE IT?
Click to expand...
Click to collapse
I don't really remember what I did to fix it. I think I had flash different roms until one took to update it to 800x600. Now I also believe I sent a pm to Malaysk. I'd be more helpfully but I not longer have the unit anymore. Wrecked the car and sold the unit.
goodboyz358 said:
hi i screwed up instilling malaysk rom 1024x600 on my kld2 rk3188 when i really needed to instill malaysk 800x480. i have not bricked the unit but i can not get it to take the correct file.
all it keeps saying is cant open /mnt/sd_storage/update.img
can not found firmware image or invalid image
update rkimage compete
installlation rkimage aborted
installation mcucfg start
installation mcucfg aborted
installation keycfg start
installation mcukey aborted.
is there a way to flash twrp thur the recover? maybe that would work better? idk i should not have even touch it
idk what i am doing wrong. i do remember doing this before by accident and i found some firmware that was on the google drives that was in 1st page of the thread. the worked great but i see there is no longer a google drives link anymore...
Click to expand...
Click to collapse
Get usb
Install update (instructions via forums)
Download the .zip free file
Place onto the same SD card (atleast I did)
Put USB into 1of the many USB ports until it works (may need to use other USB ports)
Should be able to wipe and install.
Related
Anyone have tried to install?
http://www.droid-life.com/2010/12/06/download-gingerbread-keyboard-for-rooted-devices/
According with the site:
"*Should work on ALL rooted 2.2 Android devices."
## UPDATE ##
Fixed Version: http://briefmobile.com/guide-install-android-2-3-keyboard
is there new copy paste tool ??
Welp apparently we need thr spanish tts plugin..i got an error flashing it.
I've just tried to flash and received the following message:
E: Missing file:
system/tts/lang_pico/es-ES_ta.bin
E: Verification failed
Installation aborted.
:/
Yea same error like i said its a latin ime therfore it needs some spanish plugin to run... i have google voice search and tts i think..hmm anyone? Input
I can flash this
forum.cyanogenmod.com/topic/2697-nightlies-discussion-of-nightlies/page__view__findpost__p__100053
but it doesnt start, it crashes. Other people say they use it on the G1
forum.cyanogenmod.com/topic/2697-nightlies-discussion-of-nightlies/page__st__5100
If somebody manages to run it, please let me know how... I keep on trying tomorrow.
Greets
i just installed the apps and also encountered the error, but there was a fix...disable verification under custom recovery and run the it again.
Asuma06 said:
i just installed the apps and also encountered the error, but there was a fix...disable verification under custom recovery and run the it again.
Click to expand...
Click to collapse
Please can you describe exactly what you did to get the keyboard running? I tried to toggle verification in 'other' but after installation the keyboard is still crashing.
Thank you!!
Sent from my LG-P500 using XDA App
I tried flashing it with verification off but i still get an error.
"E: Error in /sdcard/update.zip
(Status 0)".
What does this mean? Did I do something wrong? what should I do?
Thanks in advance.
Only to be sure... did you rename the zip file? Because i never saw the keyboard zip with this name. Maybe you mixed something up?
oops. Was i not supposed to rename the zip?
Yes i renamed the zip into update.zip.
I reverted it into its default name but it still gave me that error.
Maybe I need to redownload it.
I've flashed the fixed version without error, but when i reboo, my device freezes on operator screen.
I had to do a Nand Restore.
Fixed version in http://briefmobile.com/guide-install-android-2-3-keyboard
after flashed the fixed keyboard allsalvati posted and disabled verification ..I am running the ginger keyboard finally..and I like ittttttt!!!!!™
Can someone post a working zip / guide ?
Tried flashing fixed version and got stuck at LG logo
better than froyo bus is still small. lg default it is even better
i've got the keyboard running, but i cant switch the correction to another language than english.
anybody has a solution???
can someone please post the updated file to another host or something? The one in the OP is dead
in installed the apk from this thread and work great, no flashing needed. http://forum.xda-developers.com/showthread.php?t=875202
had it a go from the above post..lookin goood!! toooooo responsive or its just me.
I'm an ol' windows geek and an Android noob. I rooted my Evo 3D and had a few bumps during the root process (still during beta) and got S-off and able to run all my rooted apps no errors - but, every time I try to apply any zip (using CRM v4.0.1.5 ), I now get:
Installing: /sdcard/download/zipnamehere.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
The first time I saw it was when I was trying to add SU to my phone -but - SU was on there and I was able to update it so I ignored the error.
Now, I'm trying to apply radios, etc and none will work.
I have tried downloading to Win7 x64 workstation, XP netbook and copying - have tried downloading directly - have tried praying and downloading - all (so far) to no avail
I was able to apply the latest deodexed ROM no problem (THANK YOU!) but i'm stuck and since i'm in the short-stack near-side of the bell-curve, I'm hoping maybe someone smarter than I can give me some things to check an' try...
As always, I'm very grateful for all the time and assistance!
(yes, i'm selecting zip, yes, i've verified checksum)
Cheers!
Try using TWRP recovery from TeamWin. I think the clockwork recovery is a port and may have some bugs. I believe most of the bugs have been worked out in TWRP. Worth a try anyway. It's a bit different than CW but I think as you get used to it you may like it better. I advise to never use Rom Manager app and flash everything manually from recovery anyway.
Sent from my Transformer TF101 using XDA Premium App
housry23 -
TWRP, eh? - It's something new to try tonight... I'll post back either way once I've got the kids to sleep and have a moment to focus
Many thanks for the quick reply and the information!
Cheers!
Okay - one more piece of the puzzle: installed TWRP and told it to doa signature verification... the md5 check is fine but even so, it's telling me the signature check is failing - for the sake of argument - if i assume the file is good, what would cause my phone to be unable to correctly verify file signatures?
and so far - very impressed with TWRP - thanks for pointing me in a proper direction!
I've fastbooted so i'm completely on stock. No safestrap, or custom ROM.
The official JB OTA didn't work either, but that was before I fastbooted and I haven't been able to see if the OTA works instead of the manual install but we'll have to wait and see.
I place the JB file on my ext. sd card.
I go into recovery and hit install from sd card and choose the JB.
It starts to update, but it gives me this error shortly after.
"Verifying update package
Failed to verify whole-file signature
Signature verification failed
Installation Aborted"
I've redownloaded the JB files twice and so I don't think its the files are corrupt. I don't know where else to go from here. I always do it with above 60% battery so that isn't a issue either.
Any help? Can't seem to find anyone who can fix this for me.
Hi poncedeleon,
This method worked for me...(i'm assuming you arent a noob with this)
Head over to :
Razr ROMs Thread
Download the version you need. I used one of the RETAIL en.EU brandings but this might not be relevant to you.
1. Extract the .zip to a folder
2. Put the Razr into Fastboot and connect USB
3. Run prj-mfastboot.exe from the extracted folder - this is a really quick step
4. Run FlashME.bat - took about 5 mins and should boot into stock rom
You will need to re-root if you want.
Hope this helps
Informal Disclaimer - please dont blame me if it goes wrong or doesnt work. it worked when i did it.
arkoze said:
Hi poncedeleon,
This method worked for me...(i'm assuming you arent a noob with this)
Download the version you need. I used one of the RETAIL en.EU brandings but this might not be relevant to you.
1. Extract the .zip to a folder
2. Put the Razr into Fastboot and connect USB
3. Run prj-mfastboot.exe from the extracted folder - this is a really quick step
4. Run FlashME.bat - took about 5 mins and should boot into stock rom
You will need to re-root if you want.
Hope this helps
Informal Disclaimer - please dont blame me if it goes wrong or doesnt work. it worked when i did it.
Click to expand...
Click to collapse
Hey, thanks for your help but it ended up working anyways. I guess the download i had was corrupt and that was causing it. I downloaded the JB from another website and it worked flawlessly.
Again, thanks for trying to help
To start off with, I'm just wondering, do you ALWAYS have to enter a CAPTCHA when posting to this forum. That will drive me nuts!
Anyhow, I am looking to install Cyanogenmod on my Samsung Galaxy Mega 6.3 (GT-I9205) and I haven't been in the business of modding an Android phone in a LONG long while. The videos on YouTube are extremely lackluster in walking you step-by-step if you haven't been in it for a while. I don't just want to install the ROM and call it a day, I want to understand what the process is first, create a full image of my phone first in case anything goes wrong and AFTER that point I want to install a Cyanogenmod.
So, from what little bits and pieces I have gleaned from the Internets, I have come across three main themes when modding.
1. Root
2. ClockworkMod
3. Cyanogenmod
I don't want to brick my phone so I'd like some help in getting started with this.
Please move this thread if it's not in the right spot.
Question 1: As far as rooting your phone, is the process similar on the Android platform as a whole or is there specific steps for each "line" of phones. It feels like rooting is pretty cut-and-dry. I have rooted before, I just don't remember exactly what the most efficient way of doing it was.
Question 2: It seems like installing ClockworkMod requires that you select an option that's specifically for your phone (i.e. picking an option that applies to a differing phone will brick your phone). Am I correct in this assumption.
Question 3: To my understanding from what I've seen, it is recommended that you white your phone and clear the cache (a very good suggestion) when installing a new ROM. Should this be done after you install ClockworkMod? At what point should this be done and what is the correct steps to do this?
I'm a developer & programmer by nature, but this Android stuff really has me feeling unfamiliar so I need everyones help to understand how this beast ticks.
GreenLED said:
To start off with, I'm just wondering, do you ALWAYS have to enter a CAPTCHA when posting to this forum. That will drive me nuts!
Anyhow, I am looking to install Cyanogenmod on my Samsung Galaxy Mega 6.3 (GT-I9205) and I haven't been in the business of modding an Android phone in a LONG long while. The videos on YouTube are extremely lackluster in walking you step-by-step if you haven't been in it for a while. I don't just want to install the ROM and call it a day, I want to understand what the process is first, create a full image of my phone first in case anything goes wrong and AFTER that point I want to install a Cyanogenmod.
So, from what little bits and pieces I have gleaned from the Internets, I have come across three main themes when modding.
1. Root
2. ClockworkMod
3. Cyanogenmod
I don't want to brick my phone so I'd like some help in getting started with this.
Please move this thread if it's not in the right spot.
Question 1: As far as rooting your phone, is the process similar on the Android platform as a whole or is there specific steps for each "line" of phones. It feels like rooting is pretty cut-and-dry. I have rooted before, I just don't remember exactly what the most efficient way of doing it was.
Question 2: It seems like installing ClockworkMod requires that you select an option that's specifically for your phone (i.e. picking an option that applies to a differing phone will brick your phone). Am I correct in this assumption.
Question 3: To my understanding from what I've seen, it is recommended that you white your phone and clear the cache (a very good suggestion) when installing a new ROM. Should this be done after you install ClockworkMod? At what point should this be done and what is the correct steps to do this?
I'm a developer & programmer by nature, but this Android stuff really has me feeling unfamiliar so I need everyones help to understand how this beast ticks.
Click to expand...
Click to collapse
Hi..check this thread out http://forum.xda-developers.com/showthread.php?t=2566642 as it has all you need to get the CM11 rom on your device which works on your version..all what you need is in Silesh.Nair signature (links) at the bottom of his posts, and just download odin 3.07 as you will need one of the recoveries CWM or TWRP with kitkat support to install the CM11 rom, but they are available in Silesh.Nair signature in his posts.
starmaster10 said:
Hi..check this thread out http://forum.xda-developers.com/showthread.php?t=2566642 as it has all you need to get the CM11 rom on your device which works on your version..all what you need is in Silesh.Nair signature (links) at the bottom of his posts, and just download odin 3.07 as you will need one of the recoveries CWM or TWRP with kitkat support to install the CM11 rom, but they are available in Silesh.Nair signature in his posts.
Click to expand...
Click to collapse
I am unable to post in the dev forum yet as I am new to forums however I have i527m device and I have read that it works with this phone however everytime I try and install through TWRP it says zip verification failed and when I try through CWM it aborts and says "status 7" any idea why?
shadow1179 said:
I am unable to post in the dev forum yet as I am new to forums however I have i527m device and I have read that it works with this phone however everytime I try and install through TWRP it says zip verification failed and when I try through CWM it aborts and says "status 7" any idea why?
Click to expand...
Click to collapse
Did you install the latest recovery ( twrp/cwm )? It will only work with the recoveries available in my signature. First flash the recovery using Odin, then flash the ROM zip using recovery.
Silesh.Nair said:
Did you install the latest recovery ( twrp/cwm )? It will only work with the recoveries available in my signature. First flash the recovery using Odin, then flash the ROM zip using recovery.
Click to expand...
Click to collapse
Yes I used the files in your signature and installed TWRP as follows
- Opened ODIN
- Put Phone into Stock Recovery
- Plugged into comptuer
- Loaded TWRP tar file under PDA in ODIN
- Clicked Start
No errors popped up
To Flash Rom
- Restarted phone and held Volume Up button to load TWRP
- Full Backup before Flashing
- Touched Install
- Selected zip file downloaded from your status
It starts updating and has the following on the screen
"Updating partition details...
Running boot script...
Finished running boot scrip.
Installing '/external_sd/cm-11-20131216-UNOFFICI (text goes off screen at this point)
Checking for MD5 file
Skipping MD5 check: no MD5 file found
Verifying zip signature...
E:Zip signature verification failed: 1
Error flashing zip '/external_sd/cm-11-20131216- (Text goes off screen again)
Updating partition details...
Failed (in red letters)"
Then gives me option of Home, Wipe cache/dalvik(which I also tried) or reboot system
Do you have the rom file on your external sd card..if so I would put the rom zip file on the internal sd and see if it works then..unless you have the rom file on your internal sd already..then disregard this..but it should work.
Sent from my SGH-I527M Mega 6.3
Silesh.Nair said:
Did you install the latest recovery ( twrp/cwm )? It will only work with the recoveries available in my signature. First flash the recovery using Odin, then flash the ROM zip using recovery.
Click to expand...
Click to collapse
Thank you for Paranoid, I get my mega Tuesday eager to try Paranoid.
starmaster10 said:
Do you have the rom file on your external sd card..if so I would put the rom zip file on the internal sd and see if it works then..unless you have the rom file on your internal sd already..then disregard this..but it should work.
Sent from my SGH-I527M Mega 6.3
Click to expand...
Click to collapse
I tried moving to internal SD and then attempted flashing using TWRP v 2.6.3.0 from this thread and got the following
"Updating partition details...
Running boot script...
Finished runnigng boot script.
Installing '/sdcard/cm-...blah blah blah file
CHecking for MD5 file...
Skipping MD5 check: no MD5 file found
Verifying zip signature....
E:Zip signature vcerification failed: 1
Error flashing zip *enter file name here*
Updating partition details..."
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Anyway you can help me out I'm stuck like you were. I can't get it to install it says install aborted.
shadow1179 said:
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Click to expand...
Click to collapse
Use philz recovery instead of twrp.
Sent from my Nexus 5 using xda premium
shadow1179 said:
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Click to expand...
Click to collapse
I have the same problem, how did you fixed it ?
---------- Post added at 08:04 PM ---------- Previous post was at 07:37 PM ----------
shadow1179 said:
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Click to expand...
Click to collapse
Im stuck on that MD5 File Problemmmmmm Im soo frustrated help
jcar6245 said:
I have the same problem, how did you fixed it ?
---------- Post added at 08:04 PM ---------- Previous post was at 07:37 PM ----------
Im stuck on that MD5 File Problemmmmmm Im soo frustrated help
Click to expand...
Click to collapse
If you want any help then you can create your question in Q&A section > Help thread..
U will find your answer better there..
The usb port in my samsug i747M S3 is not working on any pc and my phone is stuck in a bootloop. I need to know if there is anyway to flash in a custom recovery via the stock recovery or flash in a new zip flashable rom through stock recovery.
I have used cygwin kitchen to put together a flashable zip from a odin rom i downloaded online but i keep getting esignature verification failed. After researching this i found that only samsung signed zips are allowed to be flashed in stock recovery. How can i sign my zips and make them appear as Samsung signed? If possible!!
narell said:
The usb port in my samsug i747M S3 is not working on any pc and my phone is stuck in a bootloop. I need to know if there is anyway to flash in a custom recovery via the stock recovery or flash in a new zip flashable rom through stock recovery.
I have used cygwin kitchen to put together a flashable zip from a odin rom i downloaded online but i keep getting esignature verification failed. After researching this i found that only samsung signed zips are allowed to be flashed in stock recovery. How can i sign my zips and make them appear as Samsung signed? If possible!!
Click to expand...
Click to collapse
Sorry man, that's pretty much the proverbial rock and a hard place... I'm assuming you already tried the factory reset? There really aren't many options when you are in this situation without getting the USB port fixed (which is soldered, so not the easiest thing to do). You can't flash a custom recovery or rom through the stock 3e recovery. At all. Some phones you can, this isn't one of them. This limits your options to 2 things -
Find an OTA update zip that is the same version or the one that is the next in line of updates such as this:
http://www.androidegis.com/how-to/leaked-jelly-bean-ota-update-for-bell-galaxy-s3-i747m-9-mvlali1/ (but this is older and probably won't work and do not even try if you were 4.3 last and is a leak version - this is just for example purposes only)
or you can try this, though since your boatloader is probably fine, not sure if it will work either:
http://forum.xda-developers.com/showthread.php?t=2549068
Other than that, your options are JTAG service or fixing the port, which if you are gonna spend the $ for a JTAG service, it'd make more sense to just put that towards the repair and then it will be very easy to reload the OS once that is fixed.
es0tericcha0s said:
Sorry man, that's pretty much the proverbial rock and a hard place... I'm assuming you already tried the factory reset? There really aren't many options when you are in this situation without getting the USB port fixed (which is soldered, so not the easiest thing to do). You can't flash a custom recovery or rom through the stock 3e recovery. At all. Some phones you can, this isn't one of them. This limits your options to 2 things -
Find an OTA update zip that is the same version or the one that is the next in line of updates such as this:
http://www.androidegis.com/how-to/leaked-jelly-bean-ota-update-for-bell-galaxy-s3-i747m-9-mvlali1/ (but this is older and probably won't work and do not even try if you were 4.3 last and is a leak version - this is just for example purposes only)
or you can try this, though since your boatloader is probably fine, not sure if it will work either:
http://forum.xda-developers.com/showthread.php?t=2549068
Other than that, your options are JTAG service or fixing the port, which if you are gonna spend the $ for a JTAG service, it'd make more sense to just put that towards the repair and then it will be very easy to reload the OS once that is fixed.
Click to expand...
Click to collapse
Thanks alot for your help...i downloaded the rom from the link u sent..the flash woud have been successfull but it was aborted due to this error
E: Error in /tmp/sideload/package.zip (Status 6). Installation aborted.
What does this mean? Is there anyway i can go into the rom package and fix it?
narell said:
Thanks alot for your help...i downloaded the rom from the link u sent..the flash woud have been successfull but it was aborted due to this error
E: Error in /tmp/sideload/package.zip (Status 6). Installation aborted.
What does this mean? Is there anyway i can go into the rom package and fix it?
Click to expand...
Click to collapse
I specifically said that it probably wouldn't work and was only for the idea. That update was a leaked version of 4.1.1. I'm assuming your system is probably newer than that, hence why it wouldn't work. I don't know what update you are on and not sure if there is an OTA that would be helpful even. Just saying in your current situation, there aren't many options.