Phone is bricked, any help would be appreciated. I downloaded a loader.img from a russian forum but am not sure about how to load the same via memory card.
I read about loading a TOT file but cannot find the same
Download your firmware from here http://lg-phone-firmware.com/firmware-LG+L65-Tutti-50.html
Then follow the thread http://forum.xda-developers.com/showthread.php?t=2797190
GreekDragon said:
Download your firmware from here http://lg-phone-firmware.com/firmware-LG+L65-Tutti-50.html
Then follow the thread http://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
Already tried this, does not connect
Any other method please
silhouette said:
Already tried this, does not connect
Any other method please
Click to expand...
Click to collapse
Are you sure that you following the steps carefully?
What it shows?
GreekDragon said:
Are you sure that you following the steps carefully?
What it shows?
Click to expand...
Click to collapse
I have attached screenshot
Phone basically does not connect to software
Only software that connects is Medusa professional tool. The 'easyrepair' function completes but phone does not turn on.
Shows in device manager as 'qualcomm hs-usb qdloader 9008'
silhouette said:
I have attached screenshot
Phone basically does not connect to software
Only software that connects is Medusa professional tool. The 'easyrepair' function completes but phone does not turn on.
Shows in device manager as 'qualcomm hs-usb qdloader 9008'
Click to expand...
Click to collapse
Try with other USB Cable and ports.
Try with another PC.
GreekDragon said:
Try with other USB Cable and ports.
Try with another PC.
Click to expand...
Click to collapse
Tried on two win7 PCs, now will give a try on an XP PC
Thanks
Tried different PCs and operating systems. Process stops at 60% in emergency mode, in DIAG mode phone does not connect
GreekDragon said:
Try with other USB Cable and ports.
Try with another PC.
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?s=&showtopic=627989&view=findpost&p=36483576
This post says something about loading a loader image via external sd card
Has anyone tried this, I have a loader.img for l65 d280n but was not able to revive phone
http://4pda.ru/forum/index.php?showtopic=627989&st=440#entry36483576
I followed above procedure loaded loader.img from a 4gb memory card
Now I can again get to download mode. But update fails at 15%
Phone screen shows 'rooted' in red; is this reason for update fail? Screenshot attached
silhouette said:
http://4pda.ru/forum/index.php?s=&showtopic=627989&view=findpost&p=36483576
This post says something about loading a loader image via external sd card
Has anyone tried this, I have a loader.img for l65 d280n but was not able to revive phone
Click to expand...
Click to collapse
Post please here loader.img for d280n. Thank you.
Posting as a guest to add my experience with unbricking an LG-D280n phone...
My phone bricked when allowing an online software update from LG. The phone froze on the startup logo for hours, and download menu could not be entered, just the fatal error pink screen was displayed. LG service centre said they couldn't fix it, the online instructions using LG Flash Tool 2014 or BordDiag v2.99 wouldn't help, but then I came across the YouTube video 'LG L65 D285 DBI Err Fatal' by VARAN500. Yes, it is in Russian, no, I don't speak Russian, but it is simple enough
Treat your LG phone as a removable drive, connected via USB to a PC with the LG USB driver and the LG Mobile Support Tool installed.
In my case, when the LG phone displayed the pink screen, it also showed as a removable drive (with a 4GB disk) on the connected PC. Follow the insructions in the video for a low-level quick format of that 4GB disk, re-format it as FAT32, then write the abovementioned loader.img to that drive. Disconnect the battery, and you should now be able to go into download moade, from which you can either use the official LG app or Flash Tool with a .kdz image to re-write the firmware to your phone.
A few restarts and (irrelevant?) error messages later, my phone was working again, and to my amazement, all my data and settings were still there too!
Hope that helps other who might be in the same sitation as I was.
hi
silhouette said:
Phone is bricked, any help would be appreciated. I downloaded a loader.img from a russian forum but am not sure about how to load the same via memory card.
I read about loading a TOT file but cannot find the same
Click to expand...
Click to collapse
does anyone have a solution for this particulare phone i wont to fix this phone
Related
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.
any way to make testpoint?
thanks for your help
xebaxtian said:
any way to make testpoint?
thanks for your help
Click to expand...
Click to collapse
What is a testpoint? Also, questions go in Q&A please.
roirraW "edor" ehT said:
What is a testpoint? Also, questions go in Q&A please.
Click to expand...
Click to collapse
I can force the qhusb way?
sorry for my english
my phone is always in black screen, the pc detected
"LGE Androidnet USB Serial Port" but when dealing with LGFlashTool
xebaxtian said:
I can force the qhusb way?
Click to expand...
Click to collapse
xebaxtian said:
sorry for my english
my phone is always in black screen, the pc detected
"LGE Androidnet USB Serial Port" but when dealing with LGFlashTool
Click to expand...
Click to collapse
Ah, you're trying to use the TOT method. Some people, including me, have lots of trouble with one method but not the other. I suggest trying the KDZ method and the 10B_01 KDZ file.
Do you have the Verizon-specific LG drivers v2.20 (in the filename, not the driver version in Device Manager)? Once the drivers are installed, plug the phone in, check Device Manager and wait until all drivers are installed - all phone related devices in the manager no longer show up as no driver installed.
Then put the phone in download mode and let it install more drivers if necessary. This could take a few minutes or 10+ minutes. It usually takes quite a while for me.
After the drivers are all installed with the phone connected, reboot the computer. Even with the drivers recognizing the phone, people have found that things won't behave correctly with the LG Flash Tools until they reboot the computer after installing the drivers.
roirraW "edor" ehT said:
Ah, you're trying to use the TOT method. Some people, including me, have lots of trouble with one method but not the other. I suggest trying the KDZ method and the 10B_01 KDZ file.
Do you have the Verizon-specific LG drivers v2.20 (in the filename, not the driver version in Device Manager)? Once the drivers are installed, plug the phone in, check Device Manager and wait until all drivers are installed - all phone related devices in the manager no longer show up as no driver installed.
Then put the phone in download mode and let it install more drivers if necessary. This could take a few minutes or 10+ minutes. It usually takes quite a while for me.
After the drivers are all installed with the phone connected, reboot the computer. Even with the drivers recognizing the phone, people have found that things won't behave correctly with the LG Flash Tools until they reboot the computer after installing the drivers.
Click to expand...
Click to collapse
I can not put the phone in download mode, only black screen
xebaxtian said:
I can not put the phone in download mode, only black screen
Click to expand...
Click to collapse
Oh! Have you tried the LG Mobile 2014 that supports flashing KDZ files anyway? Worth a try.
Sent from my VK810 4G
Problem Description
1.LG G2 stuck at boot logo.
2.Cannot enter download Mode
3.Stuck at factory reset screen (factory reset processing) and cannot enter RECOVERY
4.cannot enter fastboot mode
5.Phone not detecting in your computer either windows or linux!
6.Cannot enter qhsusb mode.
7.Gone to service centre and they said to replace motherboard and u hav no warranty!
[ As stated by dear friend kryptonite
THIS METHOD WONT WORK IF YOU ARE STUCK IN QDLOADER 9008 MODE.(PHONE CONNECTED TO PC SHOWS SERIAL PORT).
(For you guys,there seems to be no options as of now.You will have to replace motherboard or wait for JTAG support.IF any of you need me to try to find a method you are welcome to sent your device to me so i can check it out.) ]
This can occur when flashing wrong images to the partitions when in qhsusb mode.
IF YOU CAN ENTER QHSUSB MODE [BLACK SCREEN BOOT] THEN FOLLOW THIS TUTORIAL
http://forum.xda-developers.com/show....php?t=2582142
Only solution for you guys is the following..
[THIS SOLUTION IS EASY BUT NEEDS YOU TO MESS WITH THE MOTHERBOARD.BUT SOLUTION DOESNOT REQUIRE HARDWARE SERVICE SKILLS.THE ONLY OTHER SOLUTION FOR YOU GUYS IS TO CHANGE THE MOTHERBOARD.SO THIS WIL BE YOUR ONLY CHOICE.]
1. For that you have to contact me...........
dear op, i have d802. my foolishness, i flashed d800 software on it.now it stuck in boot loop.i can factory reset the phone but of no use. phone can be booted in download mode but it is not detected by pc.although it is detected by windows when in boot loop, lg android net modem all shows but in download mode, nothing is detected.
as it is not detected in download mode, i can not flash anything.it is also not detected in ubuntu.
need help and advice regarding this what to do now.
hahmad78 said:
dear op, i have d802. my foolishness, i flashed d800 software on it.now it stuck in boot loop.i can factory reset the phone but of no use. phone can be booted in download mode but it is not detected by pc.although it is detected by windows when in boot loop, lg android net modem all shows but in download mode, nothing is detected.
as it is not detected in download mode, i can not flash anything.it is also not detected in ubuntu.
need help and advice regarding this what to do now.
Click to expand...
Click to collapse
The next step I'd try is using a different computer if possible. I've had similar issues before, but it turns out my old laptop just didn't like my phone.
shubh2007 said:
[ As stated by dear friend kryptonite
THIS METHOD WONT WORK IF YOU ARE STUCK IN QDLOADER 9008 MODE.(PHONE CONNECTED TO PC SHOWS SERIAL PORT).
(For you guys,there seems to be no options as of now.You will have to replace motherboard or wait for JTAG support.IF any of you need me to try to find a method you are welcome to sent your device to me so i can check it out.) ]
This can occur when flashing wrong images to the partitions when in qhsusb mode.
I.
Click to expand...
Click to collapse
Just FYI - this is an incorrect statement. I myself had a QHUSB 9008 error and it was fixed REMOTELY (using TeamViewer) using a special software called BoardDiag by some members on this board (like Tungkick). It does cost 20-30$ though, but the G2 is one of the most repairable phones I have seen
asdfvtn said:
The next step I'd try is using a different computer if possible. I've had similar issues before, but it turns out my old laptop just didn't like my phone.
Click to expand...
Click to collapse
have tried 3 different pc, windows xp, 7 32 bit, 64 bit, even 12.10 ubuntu
---------- Post added at 10:42 PM ---------- Previous post was at 10:34 PM ----------
i tried to go for short capacitor method too, but as i attach data cable, pc detecte lg virtual modem and lg blue tooth modem. confused what to do now
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
Hi Friedns,
During the unbrick process of my LG G3 d851 T-Mobile, I mistakenly flash the sbl1 partition before flashing any other partitions (using the "BoardDiag_v2.99a_modified_by_willcracker" ), my phone turned on (showing battery with exclamation sign). Now, I'm unable to repair it, I'm too much worried and wasted a month or so while searching the solution. Please help me to get back to previous state sothat I can flash partitions in right sequence.
Thanks in advance.
musmanzulfiqar said:
Hi Friedns,
During the unbrick process of my LG G3 d851 T-Mobile, I mistakenly flash the sbl1 partition before flashing any other partitions (using the "BoardDiag_v2.99a_modified_by_willcracker" ), my phone turned on (showing battery with exclamation sign). Now, I'm unable to repair it, I'm too much worried and wasted a month or so while searching the solution. Please help me to get back to previous state sothat I can flash partitions in right sequence.
Thanks in advance.
Click to expand...
Click to collapse
Sorry to hear that, you would need to flash the entire firmware again.
I personally use the LGUP tool, you can download it here https://www.mylgphones.com/download-lg-up-software
Next, you would need to find the .kdz firmware of your phone. Try searching on google for it, it should be around 1gb file. Flashing that stock firmware should repair your phone.
Thanks for reply bro.
Unfortunately no software is detecting my device.
It's just appearing as "LGE androidnet usb serial port" in device management.
How could I unbrick in this situation.
musmanzulfiqar said:
Thanks for reply bro.
Unfortunately no software is detecting my device.
It's just appearing as "LGE androidnet usb serial port" in device management.
How could I unbrick in this situation.
Click to expand...
Click to collapse
Is your device in download mode? It has to be in download mode, then you can use LGUP to download the firmware.
Device is completely off, not turning on, no recovery mode and no download mode. Screen just turns on when connected to PC without battery and then shows sign of exclamation.
musmanzulfiqar said:
Device is completely off, not turning on, no recovery mode and no download mode. Screen just turns on when connected to PC without battery and then shows sign of exclamation.
Click to expand...
Click to collapse
Hi , maybe this can help you:
https://www.google.rs/amp/www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/amp/