?? Bricked samsung player 5.0 - Samsung Galaxy Player 4.0, 5.0

Hi guys, any clue about what this screenshot means?
This is the only thing that my player can do. Is it dead? Or is there still hope. Thanks.

davpod said:
Hi guys, any clue about what this screenshot means?
This is the only thing that my player can do. Is it dead? Or is there still hope. Thanks.
Click to expand...
Click to collapse
Mehh, there is still some hope to this. Actually it isn't as bad as some cases in the past XD. Note that by following these methods, you will probably lose your data (not all of it) but at least your device will be recovered. What did you actually do to the device itself?
1. Download the ROM package situable for your device (In your case, looks like a YP-G70 internationnal):
http://forum.xda-developers.com/showthread.php?p=39188127
2. Follow the instructions here (Original Galaxy S section):
http://forum.xda-developers.com/showthread.php?t=1922461
3. Once everything has been flashed, try entering your device into recovery mode (Power/Vol+/Home) and wipe your data.
Hope it helps!!

Related

[Q] Wierd Recovery screen after CWM installation

Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail

[SOLVED] Boot Loop [Cant acess Recovery mode] Galaxy Ace s5830

Problem was solved by taking it to samsung service!
They changed a main piece. The motherboard!
DO NOT USE GALAXY_UNLOCKER.APK if you dont want your phone tottaly bricked!
There are other ways to unlock it!
raul2100 said:
Hello,
I dont know IF posting in the right place, but I searched the whole forum for a proper answer how to "unbrick" my boot loop-ed Samsung Galaxy Ace S5830..
Now I've tried installing several firmwares using Odin multi downloader v4.83 but none of them helped me, after all I cant access Recovery Mode!
I can acess Download mode, Emergency Dmod (arm9) and RAMDUMP (arm9)
I have: Android 2.3.3 GingerBread on T-Mobile Carrier (Hungary)!
How did I get here: rooted with SuperOneClick 2.3.2 and used an app for unlock (Galaxy Ace Unlock.apk) witch was probably the main source of the problem... Had no problems until I decided to reboot, rebooted successfully, the problem I had then was No carrier, then tried a second reboot and ever since then I'm stuck into a boot loop with no access whatsoever to RECOVERY MODE.
After installing firmware and waiting the 5 minutes in Odin, my device reboots intro a boot loop after about 2:32 min and nothing can be done furthermore...
I've serched the forum and found that data.rfs is missing in the firmwares... maybe that the source of the problem to... I dont know...
Please help me fix this problem!! Thank you!
p.s: noob alert
Click to expand...
Click to collapse
You'll just have to keep flashing roms via Download Mode until one works (try flashing the stock rom).
P.S.: Your device has it's own forum: http://forum.xda-developers.com/forumdisplay.php?f=1164.
Theonew said:
You'll just have to keep flashing roms via Download Mode until one works (try flashing the stock rom).
P.S.: Your device has it's own forum: http://forum.xda-developers.com/forumdisplay.php?f=1164.
Click to expand...
Click to collapse
Which ones should I try? Any Advice is helpfull!
raul2100 said:
Which ones should I try? Any Advice is helpfull!
Click to expand...
Click to collapse
As I said - the stock rom.
Theonew said:
As I said - the stock rom.
Click to expand...
Click to collapse
just tried, not working: S5830SERKPH 2.3.4 stock rom
raul2100 said:
just tried, not working: S5830SERKPH 2.3.4 stock rom
Click to expand...
Click to collapse
Are you flashing it correctly? Make sure you do everything in step C here: http://forum.xda-developers.com/showthread.php?t=1034145.
Theonew said:
Are you flashing it correctly? Make sure you do everything in step C here: http://forum.xda-developers.com/showthread.php?t=1034145.
Click to expand...
Click to collapse
every single step, when it should reboot it goes straight to boot loop, and still no recovery menu...
raul2100 said:
every single step, when it should reboot it goes straight to boot loop, and still no recovery menu...
Click to expand...
Click to collapse
Try flashing this one: http://www.hotfile.com/dl/137316855/e3bb576/S5830BUKS2_S5830VDHKS1_VDH.zip.html.
I've tried that today, didn't work either.
raul2100 said:
I've tried that today, didn't work either.
Click to expand...
Click to collapse
Try flashing a Froyo rom then: http://droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html.
Theonew said:
Try flashing a Froyo rom then: http://droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html.
Click to expand...
Click to collapse
well, now it wont even start! I think I've bricked it,
cant even boot it, nor download mode nor nothing...
raul2100 said:
well, now it wont even start! I think I've bricked it,
cant even boot it, nor download mode nor nothing...
Click to expand...
Click to collapse
Did you choose the one for your device (country+carrier)? Anyways, see here on how to unbrick it: http://forum.xda-developers.com/showthread.php?t=1071970.
Theonew said:
Did you choose the one for your device (country+carrier)? Anyways, see here on how to unbrick it: http://forum.xda-developers.com/showthread.php?t=1071970.
Click to expand...
Click to collapse
dident picked the one for my carrier or country, cause there no description on them... so I picked the 1st one, I did the unbricking btw.. but still got boot loop
raul2100 said:
dident picked the one for my carrier or country, cause there no description on them... so I picked the 1st one, I did the unbricking btw.. but still got boot loop
Click to expand...
Click to collapse
Did you use the cooper.ops?
Theonew said:
Did you use the cooper.ops?
Click to expand...
Click to collapse
yes, I did!
Tried a second froyo firmware that was for my region, still not working..
raul2100 said:
yes, I did!
Tried a second froyo firmware that was for my region, still not working..
Click to expand...
Click to collapse
It seems like your motherboard is damaged so you'll have to take it in under warranty.
Theonew said:
It seems like your motherboard is damaged so you'll have to take it in under warranty.
Click to expand...
Click to collapse
Thank you for your help until now & Happy New Year! I'd still like to solve this problem somehow before I take it under warranty! Witch I was planning to do tomorrow!
I dont understand how can my motherboard be damaged? If it would be damaged then probably I't would not even start in the 1st place.
I forgot to mention that I had a Movetosd app installed also, but I dont remember the full name of the app...
Any other Ideas?
raul2100 said:
Any other Ideas?
Click to expand...
Click to collapse
You have done everything you could and it's still not fixed (even the things other people did when they had the same problem - it worked for them, but not for you), so warranty is the only other way to get it fixed (or at least replaced).
Theonew said:
You have done everything you could and it's still not fixed (even the things other people did when they had the same problem - it worked for them, but not for you), so warranty is the only other way to get it fixed (or at least replaced).
Click to expand...
Click to collapse
Thank you for the help Theonew! Appreciate! I've taken it into warranty service, hopefully they wont find my device inappropriate for free service, and so I dont have to pay for it...
The only problem is that I have to wait at least 8 days untill I get it back..
Anyway, I've researched this Galaxy Unlock apk. and it seems thats the main source of the problem.
Thanks again!

[Q] Won't turn on after system format

Hey guys.
I was doing a full wipe, to reinstall Jellybean Rom, which I had been running for 2 weeks. Thought I'd give it good wipe and update to the latest version.
I wiped.
Then I tried to format the system. This was taking ages, longer than usual, and for some reason I decided to reboot and do it again as it may have got stuck.
Now the tablet won't boot, so I can't get it in to recovery or download mode, as it won't turn on at all.
There was about 70% battery remaining.
Any ideas?
Edit: The only thing I seem able to do is see it as an APX device in Device Manager. I have tried holding down power buttons, volume buttons etc.
ohh sh*t , you bricked your tab !!
Try reading this post and try the solutions mentioned in the thread : Link to thread
Or try repairing it by following the steps in this thread : Here
georgesadam said:
ohh sh*t , you bricked your tab !!
Try reading this post and try the solutions mentioned in the thread : Link to thread
Or try repairing it by following the steps in this thread : Here
Click to expand...
Click to collapse
Thanks for the reply. I'm currently trying to nvflash it but it seems I have a locked bootloader and therefore can't. Only option seems to be to try and run the battery down as has been suggested.
Well i dont really know what to say ..
Are you still under warranty ?
Did you try posting in the thread where you downloaded the rom from because they might help you ?
Were you using a JB rom or jellybeanICS rom (toldos rom } ?
Sent from my GT-P7500 using Tapatalk 2
Yeah I bought it in June, but I don't know if they'll help me?
I haven't tried posting there, as I guess it isn't a rom issue, it is because the system shut down whilst formatting, and perhaps now has nothing to boot off of?
Toldos Jellybean at the time.
I've been trying the command prompts from here: http://forum.xda-developers.com/showthread.php?t=1130574 but it seems it is locked as I get the 0x4 error.
No idea!
then try asking toldo in his thread , he might help you with something
Asked in the Toldo thread but I believe it is a tab issue not Rom. I don't get why I can't even boot into Download or Recovery. So frustrating.
Got a dead tablet right now, trying to run down the battery and see if it'll switch on after.
Smithyster said:
Asked in the Toldo thread but I believe it is a tab issue not Rom. I don't get why I can't even boot into Download or Recovery. So frustrating.
Got a dead tablet right now, trying to run down the battery and see if it'll switch on after.
Click to expand...
Click to collapse
Fastest way is still to talk to the Samsung Support boys...
Waiting on a bag to send it off to them .
Least I've got my new S3 to play with!
Sent from my GT-I9300 using xda app-developers app

[Q] Help! I think i bricked my S3!

Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
Download a stock rom from sammobile.com and flash it the way you flashed TWRP.
adamldn said:
Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
Click to expand...
Click to collapse
It sounds like you might need to flash a ROM before it will boot. Your contacts, texts etc are gone if you wiped /data though.
thefunnyone said:
Download a stock rom from sammobile.com and flash it the way you flashed TWRP.
Click to expand...
Click to collapse
Appreciate the help guys, i thought as much, i just downloaded 'http://forum.xda-developers.com/galaxy-s3/development-i9305/stock-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807/page10' as i was typing this and am installing it now. Lets see what happens?
EDIT- IT WORKED! PHONES BACK!!!
adamldn said:
Appreciate the help guys, i thought as much, i just downloaded 'http://forum.xda-developers.com/galaxy-s3/development-i9305/stock-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807/page10' as i was typing this and am installing it now. Lets see what happens?
Click to expand...
Click to collapse
Wait stop, what kind of s3 do you have?
ArkThompson said:
Wait stop, what kind of s3 do you have?
Click to expand...
Click to collapse
GT-I9305, LTE version.
adamldn said:
GT-I9305, LTE version.
Click to expand...
Click to collapse
Ah ok, it's good that it worked. I was just worried since you posted this on the i9300 forum and said you were flashing an i9305 ROM.

[Q] Bricked My Phone

Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
nosrednaski said:
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
Click to expand...
Click to collapse
Go here
Flash Samsung stock ROM for your phone and baseband using Odin. It should be back to normal. It will be back to unrooted factory state.
Alternatively, if your cwm is still working, just flash a ROM zip after wiping data, cache, advamced->dalvik cache.
Do mounts and storage-> mount system->format system in CWM before flashing ROM if above 2 methods do not work (though I'm very sure one of them would work)
---------- Post added at 12:53 AM ---------- Previous post was at 12:50 AM ----------
Make sure that you flash the ROM of Samsung s5312 and not the one mentioned in the Odin guide. Search for it .
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
problem app system
May be you remove any important system app so i think you should install stockrom by odin or install custom rom ) there are many nice rom such as: cm11 , cm10.1
Same Problem
nosrednaski said:
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
Click to expand...
Click to collapse
Hi, have you found a solution to your issue? I am also stuck at the moment.
Never found a rom
bilicool said:
Hi, have you found a solution to your issue? I am also stuck at the moment.
Click to expand...
Click to collapse
I never did. I had to buy another phone.
nosrednaski said:
I never did. I had to buy another phone.
Click to expand...
Click to collapse
Ah i see. My apologies, I managed to fix it but it took a while. I had to download the official firmware from sammobile and flash it through odin. When i did that again i was stuck on the boot animation, but what i did was to go into my recovery and wipe cache, dalvik and also user data just to make certain and voila! phone works fine now.
I'm so sorry about your situation man, maybe you can try what i tried if you still got your phone. Its good as a spare!
Well done Sir!
I already spent a full work day on the sucker >.> I am just bitter and can't be bothered. Haha. Glad you were successful though!

Categories

Resources