Frame assembly replacement - LG V10 Q&A, Help & Troubleshooting

Long story short, I broke my v10. Was completely my fault. While the glass in the front held well, seems the backscreen went and cracked. So now I have this. I've already looked into it all on what I would have to replace, I doubt AT&T will replace this for me as I have none of that crummy insurance, and found out with this phone I will need to buy a whole digitizer/frame assembly. Only two questions regarding this.
I'm mostly 99.99% sure I know the answer to this, and I really should. Just a small benefit of a doubt. If I replace this assembly my phone will still have its current memory and set ups, right? I have no reason to believe it wouldn't, but I could somehow be wrong.
Secondly is about buying a new assembly itself. Are there any specifics I should look for? I'm going out on a whim and thinking I could one of these and it end up looking awful somehow. I'm not too aware either way.
Thanks.

Related

[Q] Mission:Repair and Digitizer Replacement

Alright, so my digitizer is about dead. It used to work if I shook it, etc.
My question is, according to mission:repair, they can replace the digitizer for $110. Should I have them do that, or should I just buy another HD2 off eBay for 200?
From what I've heard, the adhesion between the LCD and digitizer is pretty sticky, so I'm unsure if I should try their service.
So, which path should I choose? >.>
(Also, if you know any tips that may get the digitizer to work again, please let me know, even though I've tried most of them from what I've read, I think)
missionrepair.com/Mission_Repair_HTC_HD2_Touch_Screen_Repair_p/222-4196.htm
Get the digitizer and glass combo together. It's a real ***** to do it part by part and from what I have read causes so many other problems. Just get the combo together and put it in.
GEt a HD2 for $200

[Q] After an LCD replacement

A while back ago I received a G1 (Which was my favorite Android @ the time) with a broken digitizer. I was going to replace the digitizer shortly after having it unlocked. But I ran across a friend who bought an Aria off of Craigslist, who needed a T-mobile (Or unlocked) phone. So I traded my buddy my G1 for an Aria with a broken LCD. I ordered the LCD (Screwdrivers & such) off of ebay, and replaced the LCD shortly after. I didn't really have any problems doing so. But I've started to notice that it seems as if the screen / digitizer doesn't really fit down all the way. If you catch my drift. Like, Sometimes I can push the corner of the screen (Where the LED is) and it sets back down, but arises again. Would this be something that I did wrong, or maybe I need a new adhesive strip (so to say) to put back around the digitizer? Any suggestions would be highly appreciated.
_Edit_ The performance of the digitizer nor the LCD are affected. Its more so my personal preference to have it back in the right spot I guess you could say, for resale to upgrade. (Which is pretty consistent)
Same Issue
HI! I have the same issue with my Aria!
I noticed when I was replacing mine that the adhesive part you mentioned seemed "not so sticky anymore." When I take the back off and look at the corner that stick up slightly, there is no sticky at all there. I assume that's the problem. I just leave mine as is. But if there was a simple fix, I would love to know!
Hope
Actually, almost all arias do that (to some extent) after a couple of weeks. I noticed it shortly after I purchased mine. It's probably a design flaw, or just a bad design in my opinion.
The sticky tape must just break down overtime.
Just a theory...
Sent from my HTC Aria
Well. Bummer. It would make sense that it is a possible design flaw. Everything has something wrong with it. Oh well. Guess I'll just roll with it until I trade this off for something else. Thanks for the replies. Much appreciated.
I have carried my aria in my pocket, no case, for almost a year. No sign of separation from the base at any corner. I don't think separation is a normal condition from regular use. Maybe need new "stick down" stuff.
Ken1939 said:
I have carried my aria in my pocket, no case, for almost a year. No sign of separation from the base at any corner. I don't think separation is a normal condition from regular use. Maybe need new "stick down" stuff.
Click to expand...
Click to collapse
+1. Ive also never had any issues with the build quality of my Aria. Ive seen enough issues posted in the forums to know that there had to be certain batches of Arias that were just poorly made. This little thing has been through quite a bit (working on construction sites) and it still looks like the day I bought it with the exception of a scratch in the corner of the back cover (I do use a screen protector). Nothings loose, nothings worn out, nothings ever broke.

[Q] Motherboard replacement

A friend's wife dropped her vibrant into some water and powered it on before it was completely dry. Now the display is distorted with lines, occasional flickering, etc. The phone is usable sometimes (when you can see). The touch screen seems responsive, speaker works, front buttons work, and pretty much everything else I tested.
At first I suspected the display, and it might still be bad, but when I took it apart and cleaned it up there was a damaged part on the top board.
Not sure what it is, maybe a capacitor? Labeled, "2R2" on the top.
It's under the narrow portion of the metal cover. The cover that sets directly above it was scorched black.
Basically I'm wondering if it would be worthwhile or possible to replace this board, or even just the part. I'd prefer not to replace just the part since I'm terrible at soldering.
Is it even likely that this is the only culprit?
Any advice?
It is possible. See globaldirectparts.com/category-s/6611.htm for part names and google them for other places w/ cheaper prices. Sounds like lcd issue as well though.
checked there already. They don't have any of the major PCB parts listed. I googled the hell out of it looking for someone selling them(or even a part number) but the best I've found is people on ebay getting rid of "parts phones."
Craigslist or EBay for a broken phone is probably your best bet. See is you can get one that has a broken screen and no water damage. I'm guessing you don't have insurance? Or just seeing if you can do it cheaper.
Sent from my CM7 Powered Vibrant
They had insurance on the previous phone but they bought this one used and didn't call tmo to get insurance switched to it (if they even do that). So they've been paying for insurance that they can't use for the last several months.
I'm worried that the display may be bad as well and if I tell them to get one with a cracked screen they're going to be out the cost of the display as well.
Looks like that's going to be their only option aside from simply getting a new phone though.
Thanks for the replies

Screen cracked, what should I do?

Well, after being fairly sure-handed with phones, I dropped my Rezound on a tile floor and the screen has cracked in multiple places. Now, it should be noted that the picture is still fine, and the touch screen still works. Unfortunately, I don't have insurance because as I stated, I'm very good with phones. At this point though, I've come up with a couple different options. Potentially replacing the screen (I'm not sure if that's what I want to do because I'm not completely phone hardware savvy, and I don't want to waste money if I can't do it or screw something up), buying a new phone, or putting insurance on the line and sucking it up for a few weeks (not too fond of that, simply because I find that to be kind of a selfish move). I'm leaning towards getting a new phone, but I'm not sure what to do. I absolutely love my Rezound, but I'm a slight flashoholic and development hit a lull, though it's slowly beginning to come back it appears. I don't know if I should get another Rezound, or jump ship and get a GNex or GS3 or something different. Does anyone have any UNBIASED recommendations? Perhaps some direction to lead me in? I'm not looking to bash the Rezound or anything of the sorts. I love my phone, I love what the devs have done, and I have zero complaints unlike many others around here. I'm just a sucker for new hardware, and the GS3 just looks so tempting minus a few things.
TL;DR - Cracked screen, don't know if I should attempt to replace screen or get a new phone entirely (and which phone at that) or put insurance and wait to file claim
I would try and replace the screen... its not too hard if you buy the little tape from 3m that is used to adhesive and try to do it in a non dusty area
yojoe600 said:
I would try and replace the screen... its not too hard if you buy the little tape from 3m that is used to adhesive and try to do it in a non dusty area
Click to expand...
Click to collapse
Yeah I would say try and replace the digitizer as well. Thats about a $30 job
I would put some 3M packaging tape on it for a temporary fix, one strip right down the middle should hold it together and keep you from cutting your finger open until you can have it repaired.
bosox284 said:
Well, after being fairly sure-handed with phones, I dropped my Rezound on a tile floor and the screen has cracked in multiple places. Now, it should be noted that the picture is still fine, and the touch screen still works. Unfortunately, I don't have insurance because as I stated, I'm very good with phones. At this point though, I've come up with a couple different options. Potentially replacing the screen (I'm not sure if that's what I want to do because I'm not completely phone hardware savvy, and I don't want to waste money if I can't do it or screw something up), buying a new phone, or putting insurance on the line and sucking it up for a few weeks (not too fond of that, simply because I find that to be kind of a selfish move). I'm leaning towards getting a new phone, but I'm not sure what to do. I absolutely love my Rezound, but I'm a slight flashoholic and development hit a lull, though it's slowly beginning to come back it appears. I don't know if I should get another Rezound, or jump ship and get a GNex or GS3 or something different. Does anyone have any UNBIASED recommendations? Perhaps some direction to lead me in? I'm not looking to bash the Rezound or anything of the sorts. I love my phone, I love what the devs have done, and I have zero complaints unlike many others around here. I'm just a sucker for new hardware, and the GS3 just looks so tempting minus a few things.
TL;DR - Cracked screen, don't know if I should attempt to replace screen or get a new phone entirely (and which phone at that) or put insurance and wait to file claim
Click to expand...
Click to collapse
I'm in the EXACT same boat. Was getting a girl's number after the bar closed on Saturday night and she accidentally knocked it out of my hand. First cracked screen in 13 years of cell phone use. I started doing research and the parts seem cheap enough but the actual repair process seems to be an aggravation. So I'm debating $30 repair or $650 on new phone? The economics say go with a repair, but HTC's also forcing my hand on moving forward from the Rezound (since they don't want to release sources).
Just remember gnex specs are worse. That's all I gotta say.
Sent from my ADR6425LVW using xda app-developers app
Christopher3712 said:
I'm in the EXACT same boat. Was getting a girl's number after the bar closed on Saturday night and she accidentally knocked it out of my hand. First cracked screen in 13 years of cell phone use. I started doing research and the parts seem cheap enough but the actual repair process seems to be an aggravation. So I'm debating $30 repair or $650 on new phone? The economics say go with a repair, but HTC's also forcing my hand on moving forward from the Rezound (since they don't want to release sources).
Click to expand...
Click to collapse
Well after looking at a video of the repair process, I've decided that $30 is not a huge deal. The worst thing that happens is I screw up the phone beyond repair, at which point I have to get a new one anyway. At that point, what's an extra $30 when you're getting a new phone? The only downside, is there's no phone for a few days. Oh well.
cslingerland said:
Just remember gnex specs are worse. That's all I gotta say.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
This is completely true, but from a software perspective, there's a lot more development, many more options for flashing, and close to no hassle when it comes to updates. Though I love the latest hardware, and would have likely gone with the GS3.
I just got mine repaired at a place I found online cost me a little over a hundred.
Sent from my ADR6425LVW using Tapatalk 2
After breakingg mine for the 3rd time,
1st time I didn't crack it, I tore a piece of the connector that attaches to the glass, it disabled about half the screen, I was trying to paint the "red" buttons more red. Highly recommend you don't do this and just deal with it lol. I went to look for a replacement digitizer.
Found some pretty cheap like you guys, and I purchased one. When it came in I realized that it did not come with any kind of adhesive. This was tormenting. It took me about a week to finally get some special 3m "digitizer adhesive" from china. I proceeded to install it and it came out fine.
The following day I noticed that the digitizer was lifting on the left side, and that some dust had seeped up under the digitizer.
I then spent multiple days and hours trying to get the digitizer to stay, I went threw about three different adhesives, nothing had worked long enough.
2nd time I cracked the cheaped digitizer was be sheer force ;p, lol actually it was an accident. I was in the middle of applying adhiseive strips to the digitizer and I must have gotten a bit rough with it because it snapped in my had, I'm a big guy but I have seriously sensitive hands and can control what they are doing (im an artist). So the digitizer was just cheap as hell, because I had dropped the OEM on on cement a few times prior and it didn't even scratch.
So I was pissed and went to look for an OEM digitizer. Found one on eBay, and bought it, turned out not to be OEM, but it actually did look higher quality then the previous one so I kept it, I didnt pay much for it any way, and you will probably not find an OEM digitizer short of buying a new phone.
I had just about given up on trying to keep the screen down, and after so long and and about 5 hours of installing a new adhesive it turned out ok, but I had some light leaking from the left, and had to press the digitizer down to get rid of it, and that helped for about 5 seconds. Other then that it was ok, but I still kept getting damn dust.
3rd time, dropped it on my kitchen tile floor, lol. It was funny to read you dropped it on tile too. That was the end off it, I was no longer going to spend any more money on a damn digitizer.
TL;dr Read, make fun of me, Buy a new phone.
This was also the first time I ever cracked a screen by dropping it.
Sent from my ADR6425LVW using xda premium

Droid DNA Digitizer!Any danger if i replace it?

Hello guys, my digitizer broken.....the lcd is in perfect condition..but i am not sure if the digitizer can replaced alone because lcd and digitizer are stick together....so is there any way that i can fix my digitizer without buying new lcd and without damaging my lcd........i want only to replace the digitizer and have it as was when i bought it...also i am in Europe,so i don't have any warranty either a shop that sell parts and can replace it!Waiting impatiently for your help!
blake chan said:
The LCD and digitizer can be separated and you could just replace your broken digitizer. Just find this LCD and digitizer separation video in Youtube, but it's for Nokia Pure 808... http://www.youtube.com/watch?v=E7FbCvI_ZGA&list=SPFF45001BDE8794B7&index=65, the guy making this video is good at repairing phones, you could send him message to look for help/advice. Good luck!
Click to expand...
Click to collapse
I did several of the htc inspire 4g phones at one point, bought,fixed and sold. I can safely say this process CAN be done but is very difficult and not to be taken lightly. You have to dismantle EVERYTHING else to get to the digitizer/lcd assembly, heat the 2 pieces and slooooowly pry apart. It's VERY easy to break the lcd in the process, then there's dust that gets in between and/or adhesive when putting in the new. The vids make it look easy-it's not. The connectors are also fragile and EASY to break-and there are others not directly attached to the lcd, lost TINY screws. It's also VERY easy to damage the case in the process or the power/vol buttons-the list goes on! It's way easier to replace the lcd/digitizer assembly-yes, way more expensive too. I have been following several "parts" phones and replacement parts places. The phone is too new yet for parts to be in enough demand that the price is reasonable (or broken DNA's). A parts phone is in the 200-300 ranges, the digitizer around 60-80 the lcd's around 100 and the assembly (both together already) close to 200. You do the math. You can get a whole new phone for not much more. That's if you don't end up breaking other parts and replacing them as well. If you are good at this stuff, it's very rewarding and fun to do so go for it. You can always sell your phone 'for parts' on ebay if it doesn't work out. Just don't expect easy.
As someone that's done a number of these, the above information is pretty much spot on.
I busted my glass a few days ago and found that information on disassembly and repair is sparse as are the parts. Replacing the assembly is usually a safer bet, I would say that separating the two doubles the difficulty of the project, and the biggest determining factors are tools, and time.
The biggest problem for a repair like this is rushing the project.
This is one of those things that you should not do when you are short on time. Usually problems come from being in too big of a hurry, so plan on having plenty of time. If something unexpected comes into the mix, you want to be able to deal with it when you aren't tired and aren't needing to get your phone back together in a hurry because it's your only phone. So factor into the equation you might need a backup phone and it may take more hours than originally planned.
Have a decent digital camera at your side and photograph the entire disassembly process so that when it's time to put it back together you have reference points instead of counting on remembering every little detail.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2

Categories

Resources