[Q] Mission:Repair and Digitizer Replacement - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Alright, so my digitizer is about dead. It used to work if I shook it, etc.
My question is, according to mission:repair, they can replace the digitizer for $110. Should I have them do that, or should I just buy another HD2 off eBay for 200?
From what I've heard, the adhesion between the LCD and digitizer is pretty sticky, so I'm unsure if I should try their service.
So, which path should I choose? >.>
(Also, if you know any tips that may get the digitizer to work again, please let me know, even though I've tried most of them from what I've read, I think)
missionrepair.com/Mission_Repair_HTC_HD2_Touch_Screen_Repair_p/222-4196.htm

Get the digitizer and glass combo together. It's a real ***** to do it part by part and from what I have read causes so many other problems. Just get the combo together and put it in.

GEt a HD2 for $200

Related

scratches on the screen?

How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.

[Q] Digitizer Replacement...

Howdy,
Busted my digitizer and planning on replacing it so anyone got a good listing for one? Im thinking of going with the LCD Digitizer combo to avoid the joy of trying to seperate the 2 and ill probably order a 2nd digitizer to attempt to replace the one on the current LCD in the future for a spare or to sell i just dont want to be with a really busted up screen if i muff up the original in the process.
Ive searched before on the topic but dont recollect any good listings.
Im on VZW if that matters so i got the Rhod500
I had contacted an ebay seller but they couldnt tell me what i needed to know beings they got listings for GSM and CDMA screens and i cant really see what would be the difference.
I plan on doing this as soon as i can get it cause the cracks are starting to irritate me
Dies
you may want to get the screen that is for verizon logo on it since if your going to do warranty exchange or insurance claim they may want it having on the phone but it doesnt matter if it is GSM or CDMA since they are both the same screen the only difference is that they have the carrier logo on it. another thing you want to consider is getting the us version not the europe version cuz it has the hole for the face camera which the us verison did not get dont know why but it was dumb in their part.
I found this one you can see:
http://cgi.ebay.com/Touch-Screen-Pa...915404?pt=PDA_Accessories&hash=item5d2c76660c
or you can go here
http://cgi.ebay.com/HTC-Touch-Pro-2...309620?pt=PDA_Accessories&hash=item4aa48d6474
Hey, I have replaced 2 digitizers for sprint phones. They are in fact stuck down to the LCD which just means you need to be careful. I used a hair dryer to weaken the adhesive before prying off the digitizer.
I ended up having to peel apart the layers of the old digitizer to use the adhesive to hold the new one down to the case.

How to replace HTC Mozart glass / digitiser

I can't find any info on this, but it looks like it could be tricky to replace. I cracked my glass by dropping it onto stone, still works OK. You can pick up digitisers pretty cheap on ebay (£20 UK) but does anyone know how to replace? I read that they can be glued to the LCD?
Thanks
Google for the fixit website, if someone has done it there will be a tutorial, or you could follow the guide on here to upgrade your sd card....only because you have to take the phone fully apart. You need to check if the lcd is glued or like the iphone 4 resin. If they are a sealed unit you'd be better off getting the lcd/digitizer combo on ebay. trying to separate an lcd from the digitizer is asking for trouble imho.
I have ordered a digitiser, really hope the digitiser is not glued to the LCD, there is a big price difference. I'll let you know how I get on.
I bought a Mozart with wrecked digitizer and also want to repair it. The digitizer is on its way, so in a week i could tell you how difficult or maybe easy it is.
If you are faster, please post your experience.
I found this thread on xda.cn, and it seems that the lcd isnt glued on the digitizer, so lets hope so
hxxp://xxx.xda.cn/newshow.php?snid=2167
EDIT: sorry cantpost links, so must change the x's to t's and w's
I have got my digitiser now, looks brand new. Just need to find the time to replace, might upgrade the SD card at the same time.
Done
I did this with Andy's guide to help: http://lifeinthefastlaneok.wordpres...-7-mozart-sd-card-memory-upgrade/#comment-225
I used this guide to replace my digitiser (the glass) which I smashed. The good news is that the digitiser is not stuck to the LCD at all. I just bought a grade A digitiser off ebay for £20 which was pretty much perfect - glass was perfect with a couple of small marks on the back case, but basically like new.
There were a couple of differences to this guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
I now have a phone as good as new, I didn't replace the SD at the same time but probably will do at some point when I can stand loosing all my data.
Found time today to replace the digitizer. I also used Andy's videos for instruction. And it's really not that hard. Pretty easy for someones first mobile phone repair.
Well done, I would add for anyone else needing to do this, be very careful not to touch the inside of the digitiser or the LCD when you have it apart! Also have a glasses cloth handy for removing any dust particles just before you put it back together.
I do have one strange thing however - before I had intermittent issues where I could not slide the screen up when locked for 10 seconds or so. No I have a slightly different issue when unlocking - it doesn't always let me press on the right hand 3 numbers on the PIN screen! So it seems the unlocking issue some people have is due to a hardware issue. My digitiser was second hand so I might ask for a replacement, but I can change my pin so that it is not an issue.
My Mozart touch-screen hardly works at all plus my wife's Mozart has a cracked digitizer glass (still working fine).
So silly me I took the plunge and ordered three cheap replacement digitizers via eBay (from Hong Hong). They arrived today and all are s**t useless.
When I opened the box I smelt the rat when I spied the HTC logo on each was blanked out on the outside of the plastic zip-lock bags (with what looked like black felt pen), plus each glass has minor blemishes/scratches. Comparing each with the digitizers I removed from my and my wife's phones, they have a different design of ribbon cable conductor layout plus there are indications the plastic moulding isn't as well finished in a couple of places. Either these are factory rejects or knock-off copies. Lesson learnt :-(
Anyway, I now need to buy genuine HTC parts.
Any pointers toward reliable sources appreciated, thanks.
KJ
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Can someone who as changed a screen on this phone using Andys guide, please tell me how easy or hard it was, and how long does it take??
And would be grateful if someone could give me a link to the correct digitizer for this phone....
I am in the UK and have been qouted 50 pounds at a phone shop for the to supply and fit screen...
Did you see my post?
There were a couple of differences to this (Andy's) guide:
- Had to replace a speaker type thing at the top of the digitiser that was not present on the new one. Came off quite easily, just stuck in.
- Had to remove the USB port of the old case back (if you are replacing that too) but that was just a couple of screws
- You dont have to split the PCB off if doing this, you just take off the black clips to take it apart and then remove the orange ribbon cable, it is a little tricky to get the new one in but OK.
The most tricky thing for me was getting all the dust off the LCD and the digitsier, as soon as you get it apart things start sticking to it like crazy. Have a clean glasses cloth around.
It takes about an hour on your first go. The main thing is to get the orange ribbon cablle in fully, it can be tricky - you need to get a good grip on it (fold it a little) and push it home quite hard, otherwise you get it all back together and find it doesn't work.
I have had 2 dodgy screens off ebay, £50 sounds OK if it is a brand new original HTC screen.
Or just search for 'htc mozart digitiser' on ebayt there are loads.
hsclater said:
I have bought some off ebay. The problem is that these are almost always from returned Mozart's which may well have been returned due to non responsive screens, which seems to be a very common problem.
I have had 2 off the same chap now, one is OK but not perfect, the other one didnt work at all.
I would just keep returning them until you get one that works.
Sometimes you will find new combined digitiser/LCD's on ebay too, these would be a better bet but cost more.
Click to expand...
Click to collapse
Thank you for that. A close look at the ones I bought from china I'm sure now are removed from phones with faulty digitizers, then repackaged as new. One of the three had significant dust and dirt on the inside of the digitiser screen. I've requested a refund via PalPal disputes.
I've ordered some digitizers from ecell in the UK. I'm led to believe by them that these are genuine HTC factory supplied spares.
KJ
I just replaced my 4th screen (1 broke, 2 dodgy).
This one is perfect - as new condition and works perfectly, my last one was not responsive in some situations e.g. lock screen.
This is the one I got (UK)
http://www.ebay.co.uk/itm/130498971267?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Of course, your mileage may vary - some are probably good, some not. Replace it, if it doesn't work ask for another, etc.
My new digitizers arrived today from the uk. Horray they are genuine HTC spare parts properly packaged. The downside is they don't include the frame the glass sit in and is adhered to.
So I watched the official HTC Mozart disassembly video on youtube to see how to remove the existing digitizer glass from the frame - got it apart ok after heating the unit to soften the adhesives but it didn't come away entirely cleanly i.e some of the adhesive foam broke away and was left on the underside of the glass.
So... check on eBay and found sellers selling refurbished screen frames ready for a new glass to be attached.
Will update on progress once they arrive.
KJ
just ordered my digitiser today... wish me luck...lol
poolielad said:
just ordered my digitiser today... wish me luck...lol
Click to expand...
Click to collapse
Well I am now buzzing... have just changed my screen at it works perfect.....
£50 they wanted at the shop...it cost me £13....
Just to let you know how easy this is to do........If I can do it, anyone can..
Did anyone find a reliable supply in the end? I just cracked my digitiser so looking to replace it...
--edit--
Also, how much have others paid? Don't want to be ripped off for some sub-standard part.
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
fx.lagwagon said:
Hello everybody,
I m trying to replace the digitiser of a HTC Mozart too.
It is really easy to do, even the part where you have to take off the digitiser from the plastic frame.
But I have an issue, it is the second digitiser I am using ( from the same ebay shop ) and the digitiser is working inverted vertically! Really strange but it is like that.
As the mobile phone is started up, when I push on a left buton, it push on a right button ! On the key board, when I press on "P" it press on "A" ( i m using an Azerty layout, I assume it should be "Q" on your layout ).
It is really anyoing of course.
It is the second screen I received from the Ebay shop and same issue, I don't think the problem come from my side, but I just want to ask to you all if somebody have an idea or the same issue once.
Click to expand...
Click to collapse
Mate, I had the same problem. However it seems no one was able to help me either.
I also purchased a digitizer from Ebay for my Mozart - the exact same inverted issue occurred with me. I wasn't able to find a solution.
I'm in Australia with a T8697 model. The digitizer I received from Ebay had a circle around the windows button at the bottom - This was not on my original screen.
In the end, I purchased a digitizer from an Australian business. Cost double the Ebay digitizer did, so I hope it works... Haven't received it yet, but I'll let you know when I put it in.
What model Mozart do you own?

[Q] Digitizer replacement

My phone has developed a digitizer problem in that a vertical strip (approx 15mm) is completely unresponsive, and sometimes the screen goes a bit haywire (continously zooms in when web browsing or in a document). Have tried resetting the phone, and reflashing the ROM, but the problem persists.
Does anyone have any experience when with regards to replacing the digitizer, and would like to share their experiences? I.e. Is there anything which I should be made aware of, such as specific rookie errors? Have looked up some Youtube videos, so I think I'm fairly clued up, but thought I'd call in on the experts before I take the plunge!
http://forum.xda-developers.com/showthread.php?t=1591399
check this thread
not recommend replace digitizer at this moment it cast too many $$$, Asus CES2014 announce $99 smart phone.
thecjan said:
not recommend replace digitizer at this moment it cast too many $$$, Asus CES2014 announce $99 smart phone.
Click to expand...
Click to collapse
They look nice the zenfone that is will have to buy a sd card for it down side no internal memory or atleast none you can use. besides that actually looks very nice. wonder how long before you can buy one right now it says ask dealer about availability so im guessing 3 to 6 months. digitizer $15.00 and then he can sell phone for $50 to $75 dollars if he chooses to later once it finally hits stores
Yeah, but with sd cards being inexpensive (I just got a 8gb class 4 microsd for $50, about U$S10) it isn't really a downside. If you maage to get an replacement for the digitizer, buy it. as overboard says, you can sell the phone at a higher price if you decide to buy another.
OP, I had the same problem, I warn you, once you detach the digitizer from the phone, before you actually remove it, dettach the lcd also, that way, when you must remove the flex and pass it through, the gap will be larger and you wont have to bend the flex, avoiding the risk of damaging it. Digitizer and lcd are meant to be extracted together. Also, be very careful when you detach the digitizer, as dointg it hard can remove the glue strips and let the dust enter the screen. that's what happened to mine, glue strips got broken at the bottom corners, and now the capacitive buttons' light pass thru it, to the screen and dust enters and I can't see sh*t
Thanks guys. From what I've read, most people appear to experience problems either during or after the upgrade, so even though a replacement digitizer should only set me back £15, it could be more hassle that it's worth...
This could be a good opportunity to upgrade

Frame assembly replacement

Long story short, I broke my v10. Was completely my fault. While the glass in the front held well, seems the backscreen went and cracked. So now I have this. I've already looked into it all on what I would have to replace, I doubt AT&T will replace this for me as I have none of that crummy insurance, and found out with this phone I will need to buy a whole digitizer/frame assembly. Only two questions regarding this.
I'm mostly 99.99% sure I know the answer to this, and I really should. Just a small benefit of a doubt. If I replace this assembly my phone will still have its current memory and set ups, right? I have no reason to believe it wouldn't, but I could somehow be wrong.
Secondly is about buying a new assembly itself. Are there any specifics I should look for? I'm going out on a whim and thinking I could one of these and it end up looking awful somehow. I'm not too aware either way.
Thanks.

Categories

Resources