Recovery:
Download and install using recovery:
Fix-frec.zip (1.7 KB)
Original files (download one for your ROM and install using recovery): s152 (8.6 KB), s272 (9.4 KB)
Batch:
Download: Fix-frec-bat.zip (994.5 KB)
Unzip
Connect USB cable
Run Fix-frec.bat
Keep bak folder, it contains original files for restore.
Restore:
Copy init.qcom.post_boot.sh from bak folder and put it near Restore-frec.bat file from the archive above
Plug in USB cable
Run Restore-frec.bat
Well, what the idea of using this ?
Having root you can easily change: governor, i/o scheduler or frequency with an app. Like Rom Toolbox.
Maybe I am missing something ?
pabgar said:
Well, what the idea of using this ?
Having root you can easily change: governor, i/o scheduler or frequency with an app. Like Rom Toolbox.
Maybe I am missing something ?
Click to expand...
Click to collapse
This CPU has 2 clasters (4+4 cpu) with different configs. ROM Toolbox can change onlu first.
m0b said:
This CPU has 2 clasters (4+4 cpu) with different configs. ROM Toolbox can change onlu first.
Click to expand...
Click to collapse
I use 3c Toolbox
It changes both.
Best tool for a rooted device.
dreigosh said:
I use 3c Toolbox
It changes both.
Best tool for a rooted device.
Click to expand...
Click to collapse
Are you sure can get core 4-7 frequency lower than 800? Are you sure you that core 1-3 turned off on idle?
Just look at current CPU status using: CPUZ
I can get all cores as low as 200 mgh, and I am also sure they go offline while the phone sleeps
Sent from my Lenovo P1a42 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dreigosh said:
I can get all cores as low as 200 mgh, and I am also sure they go offline while the phone sleeps
Click to expand...
Click to collapse
CPUZ screenshot, plz!
m0b said:
CPUZ screenshot, plz!
Click to expand...
Click to collapse
Sent from my Lenovo P1a42 using Tapatalk
Ok, you win, 3c Toolbox seems to be smarter then i thought :good:
But it is still extra app with extra CPU time and RAM usage. And init.qcom.post_boot.sh is native and the most not resource-intensive way to configure frecs.
Nice discussion and opportunity to learn something new.
Thank guys.
dreigosh said:
I use 3c Toolbox
It changes both.
Best tool for a rooted device.
Click to expand...
Click to collapse
The version(though it's latest one) I'm using, there no option to change gpu frequency,
But in ur screenshot showing gpu option
Can u please provide the version info or link of the app u r using or step(s) if any which I'm missing?
TIA
THEHARI said:
The version(though it's latest one) I'm using, there no option to change gpu frequency,
But in ur screenshot showing gpu option
Can u please provide the version info or link of the app u r using or step(s) if any which I'm missing?
TIA
Click to expand...
Click to collapse
I think it's boot dependent on stock rom
Hi Mob. Glad I ran across your thread. I flashed your fix-freq zip and it's great frequency btw. However, it's not being persistent.
I am using Firelord's CM14 build btw. I was on S288>CM13 prior to CM 14. I'm having problems with max frequency. It wouldn't let me stick to 1.3ghz. It reverts to its stock governor (performance: cores 2 and 3 are offline, little cores 4, 5, 6,7 are set to 1.1ghz) I just found about this when I checked my cpu overlays because of stuttering and intermittent freezes.
I just need your fix-freq to hold on boot and normal usage. I can't do stuffs with a 960mhz max freq. Lol. Any help on how to achieve this is highly appreciated. See attachrd files for reference. My post also on CM14 thread:
https://forum.xda-developers.com/vibe-p1/development/rom-unofficial-lineageos-14-1-t3536834/page5
Note sure what else needs to be changed in order for the frequency to hold. Pretty sure this wasn't the case when I was on S272 and 288.
Attached is your init.qcom after flashing it through twrp. I feel that there's something overiding your qcom setup. Not sure what it is as I just want to have a stock scaling frequency on CM14.
Note sure what else needs to be changed in order for the frequency to hold. Pretty sure this wasn't the case when I was on S272 and 288.
Attached is your init.qcom after flashing it through twrp. I feel that there's something overiding your qcom setup. Not sure what it is as I just want to have a stock scaling frequency on CM14.
There's also an early boot file in >root
Related
Overclocking Xperia x8
Hello guys I asked a guide for those who want to write a pimped your x8
The 'overclocking is a procedure that can hurt your loved x8 ergo follow this guide at your own risk!
requirements:
- Rooted
- Banda Basic x15
- SetCPU
1) Download x8oc V004 http://forum.xda-developers.com/attachment.php?attachmentid=565868&d=1302528982
2) Extract the file and copy it on the sd x8oc.ko
3) By RootExplorer x8oc.ko copied to / system / lib / modules
4) Always go through RootExplorer / system / etc, hold down the file menu and hw_config.sh which opens in selected Open Text Editor
5) At the beginning put this line
code:
insmod / system/lib/modules/x8oc.ko # x8 overclocking
6) Save the changes and restart the phone
7) Open SetCPU, select Autodetect recommended speeds and set the desired frequency. Make attempts to find the maximum frequency of your CPU and select Set on Boot until you are sure it is secure
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8)Selct frequenze 825 mhz
Useless thread
Sent from my X8 using Tapatalk
non mi è nuova questa guida...
who? no is useless thread
fun thread ,
can u tell what this is?
@vixkes
I think you might need to take a look at this
Beans
please, tell me how to turn on my phone! I'm tired, my mum can't phone me by a year, my wife give me up due to she think, that I'm with other women.
vixkes, help me
I think this thread is a reminder of how great doixahn is.
vixkes said:
Overclocking Xperia x8
Hello guys I asked a guide for those who want to write a pimped your x8
The 'overclocking is a procedure that can hurt your loved x8 ergo follow this guide at your own risk!
requirements:
- Rooted
- Banda Basic x15
- SetCPU
1) Download x8oc V004 http://forum.xda-developers.com/attachment.php?attachmentid=565868&d=1302528982
2) Extract the file and copy it on the sd x8oc.ko
3) By RootExplorer x8oc.ko copied to / system / lib / modules
4) Always go through RootExplorer / system / etc, hold down the file menu and hw_config.sh which opens in selected Open Text Editor
5) At the beginning put this line
code:
insmod / system/lib/modules/x8oc.ko # x8 overclocking
6) Save the changes and restart the phone
7) Open SetCPU, select Autodetect recommended speeds and set the desired frequency. Make attempts to find the maximum frequency of your CPU and select Set on Boot until you are sure it is secure (I have come to 768mhz)
8)Enjoi you x8
Click to expand...
Click to collapse
Dear I haven't hear anyone getting above 800 using this module...if you are using higher speed (>750) I dont think your processor will live long....better stick on to a max speed of 710....... Once the bootloader is unlocked we "may" get stable overclocking with higher speed...The developers are working hard on it just wait dear....
vixkes said:
(I have come to 768mhz)
Click to expand...
Click to collapse
fkin liar. thread name suggest that you want to share the method to overclock x8 to 820 MHz, when the thread is just about OC, not oc'ing to specific frequency. you can get these instructions from doixanh's thread. this one is not only useless, it's misleading.
GTFO
big lol OMFG
sandy4everyone said:
Dear I haven't hear anyone getting above 800 using this module...if you are using higher speed (>750) I dont think your processor will live long....better stick on to a max speed of 710....... Once the bootloader is unlocked we "may" get stable overclocking with higher speed...The developers are working hard on it just wait dear....
Click to expand...
Click to collapse
Really? My friend has got newer X8(black one) and he can set 825Mhz. He only sets 825Mhz for HD gameloft games. Also check this video http://www.youtube.com/watch?v=qShBkihANmU.
velnens123 said:
Really? My friend has got newer X8(black one) and he can set 825Mhz. He only sets 825Mhz for HD gameloft games. Also check this video http://www.youtube.com/watch?v=qShBkihANmU.
Click to expand...
Click to collapse
slightly stupid really as his chip wont last long at that speed, that's 225mhz more than intended so good luck to your friend.
Mods, please close this useless thread.
Thanks in advance
codfreak said:
Mods, please close this useless thread.
Thanks in advance
Click to expand...
Click to collapse
i agree, pointless spam. only the stupid want 825mhz!!!!
cool ^^ i just fried eggs on my phone for a snack i'm recommending everyone to follow this guide.
best regards
Sent from my E15i Egg Fry Edition
Blagus said:
cool ^^ i just fried eggs on my phone for a snack i'm recommending everyone to follow this guide.
Click to expand...
Click to collapse
Hahahahaaaaaaaaaa....!!!!!!!
[double] Thread Closed.
Ok, I Just got my MK808 mini pc and I found a huge problem because I was planning to replace my tv box for at least 10 months and if I dont solve te problem it ill not las that longer...
The chip is a RK3066 (many tabs have the same chip)
It was sold as a 1.6ghz dual core... and the problem is not that it doenst go any further than 1ghz, it just doent scales down.... (stays on 1ghz indenpendent of what you are doing, and thats to much... i gets hot and without any need....)
I used this app and 2 others to confirm this...
And if I go to CPU I see the time it spent on each clock speed... and it is always on 1000mhz... (100percent) BUT the app also shows that it has the 1600mhz available... so it seems to me that the cpu is set to 1ghz/1ghz or 1ghz max with the performance kernel.... (why the f would the manufacturer do this??)
So I tried the finless ROMs 1.4, 1.5 and 1.5A and 3 different kernels on the 1.5 and I get the same result
If I change the max or min speed on a cpu app (tried NO FRILLS and rom toolbox PRO) nothing happens, it still showing 1000mhz (1008 i think)
Tried to set another governor and still the same...
set on boot and reboot but still the same...
any solution ??
thanks
And what about NAND's 8GB advertised¿?
This is my df output : 4.8GB avaiables to user data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone having same results?
Antieco said:
And what about NAND's 8GB advertised¿?
This is my df output : 4.8GB avaiables to user data.
Anyone having same results?
Click to expand...
Click to collapse
Maybe thats because of the os? On android I have 6gb free I think... 4gb on one separeted memory and 2 on the other, maybe is that... is not only one partition...
360porcento said:
Maybe thats because of the os? On android I have 6gb free I think... 4gb on one separeted memory and 2 on the other, maybe is that... is not only one partition...
Click to expand...
Click to collapse
What's your kernel version?
Antieco said:
What's your kernel version?
Click to expand...
Click to collapse
I'll check it when I get home
Sent from my R800i on 4.1.1
360porcento said:
I'll check it when I get home
Sent from my R800i on 4.1.1
Click to expand...
Click to collapse
sorry for the relay, but i cant check it right now, is the one that comes with the finless 1.5a , just google it
here http://www.freaktab.com/showthread.php?1971-NEW-MK808-Android-mini-TV-Player-Finless-1-5A-Custom-ROM
It's normal only show 4.8G available for end user
Antieco said:
And what about NAND's 8GB advertised¿?
This is my df output : 4.8GB avaiables to user data.
Anyone having same results?
Click to expand...
Click to collapse
The Android OS, pre-load apps occupied same storage, and the system need to seperate some memories as ROM ( for install apps and stock app data,), and the GPU default occupied about 40M-50M as cache. so it's only show about 4.8GB
Flash Firmware
I think Flash new firmware can resolve the problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rage Kernel was originally developed by DuMOHsmol
greenAlgae recompiled it to run on FXP CM7.2.0
Here’s the original thread (KERNEL)(Mini/MiniPro/Active/LwW) Rage Kernel v2.7 / v2.8 / v2.9 for FXP CM7.2.0 ROM
Downloads are on post 8
greenAlgae's thread was closed on the 7th June 2012
I have sent a request to our Mod to close this thread. I have switched to cm9 and I don't think I can properly maintain this kernel and thread any longer
Click to expand...
Click to collapse
I made this thread because I use CM7 and would like to see if I can continue DuMOHsmol's &
greenAlgae's work to improve this kernel for myself ill post my progress here should anyone be interested
But as always use it at your own risk
I have used greenAlgae's 2.7 version for several months
It works well for me with the stable cm-7.2.0-mango.zip available on the cyanogenmod website
Iv been using the smothass governor and have noticed massive improvements to battery life with only the occasional “screen on lag”
CPU Governors explained by deedii
14: Smoothass:
The same as the Smartass “governor” But MUCH more aggressive & across the board this one has a better battery life that is about a third better than stock KERNEL
Click to expand...
Click to collapse
Smoothass
A more aggressive version of Smartass that is very quick to ramp up and down, and keeps the idle/asleep maximum frequency even lower.
Pro: Theoretically better battery life than Smartass.
Con: Same as Smartass & Interactive (the CPU will slowly ramp down after it is no longer needed (compared to its ramping-up speed). Might also go too low when asleep (an issue with other governor when a Sleep profile is used in apps such as SetCPU), causing the device to malfunction. Most common example is the screen not powering on when the power button is pressed or the phone begins ringing. Might also effect apps running in the background while sleeping.)
Click to expand...
Click to collapse
The fist thing I wanted to change was the bootsplash
Following This Guide I was able to change it in less than 5 minuets. I used this wallpaper and some photoshop magic.
>
>
>
Image 1: original bootsplash
Image 2: Image I wanted to use
Image 3: Was very large file size, took forever to boot & looked a funny green/brown colour on the phone
image 4: This was the smallest I could get the png without it distorting to much. (I used a mixture of tools found Here) But it still took forever to boot
Then I read up on Run-length encoding
Realized what I was doing wrong and made this one.
It boots in a flash (looks better on the phone)
nice work mate!!
Thanks wasn't expecting anyone to be interested lol
Iv uploaded the boot image
Next id like to update CWM.... I found a file named recovery... but I cant see it being as simple as replacing that one file lol
Can anyone point me in the right direction?
I'm interested to see where this goes, can you tell us the changes you did to the krenel so far except the boot image?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Infinite Battery
Hi for all, i had seen this script here, and liked it a lot. So I decided to port it to the Moto X. I talked to TopDroid, and he gave me permission to do! So enjoy!
Features:
Code:
[B]What this script does?[/B]
When your phone is in AWAKE state:
Governor = Interactive
Max = 1728000
Min = 384000
When your phone is in SLEEP state:
Governor = OnDemand
Max = 384000
Min = 384000
So basically this script automatically changes governor,min & max freq and more
depending on your phone's state which results in saving battery to great extent.
Click to expand...
Click to collapse
Installation:
Code:
[B]--> With [URL="https://play.google.com/store/apps/details?id=os.tools.scriptmanager&hl=en"]Smanager[/URL]:[/B]
1. Download the script [URL="http://www.mediafire.com/download/tcguoctu36re6vr/12governortweaks.txt"]here[/URL] and put in the root of your sdcard.
2. Open SManager.
3. Navigate to the script.
4. Select the script.
5. Click on Su and Boot Button.
6. Select Save.
7. Reboot your phone.
Now SManager will run this script on every boot.
[B]--> With Custom Recovery (your ROM should have init.d):[/B]
1. Download the zip [URL="http://www.mediafire.com/download/xsifcccl9qfcjaz/Infinity+Battery+by+TopDroid+-+ported+for+Moto+X+by+ramon20.zip"]here[/URL] and put in the root of your sdcard.
2. Reboot to custom recovery.
3. Navigate to the zip.
4. Install the zip.
5. Reboot System.
Click to expand...
Click to collapse
ramon20 said:
Infinite Battery
Hi for all, i had seen this script here, and liked it a lot. So I decided to port it to the Moto X. I talked to TopDroid, and he gave me permission to do! So enjoy!
Click to expand...
Click to collapse
Gonna try... Thanks
kenosis said:
Gonna try... Thanks
Click to expand...
Click to collapse
Thanks
Going to give this a whirl also.
Currently running Eclipse ROM and was just about to flash Krypto's stock enhanced kernel. Wondering what this will do with that.
rebretz000 said:
Going to give this a whirl also.
Currently running Eclipse ROM and was just about to flash Krypto's stock enhanced kernel. Wondering what this will do with that.
Click to expand...
Click to collapse
Does removing file from sd card remove the script, or do we need to delete something from init.d folder?
Sent from my XT1060 using Tapatalk
What script should i delete in the ini.d folder if i no longer want this mod? I haven't tried it yet, but just want to be sure i can remove it if needed.
APeaceofStrange said:
Does removing file from sd card remove the script, or do we need to delete something from init.d folder?
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
i didn't understand buddy
Globalrebel said:
What script should i delete in the ini.d folder if i no longer want this mod? I haven't tried it yet, but just want to be sure i can remove it if needed.
Click to expand...
Click to collapse
you should delete the "12governortweaks"
if I don't see 12governortweaks in system/etc/init.d/ did i do something wrong?
APeaceofStrange said:
if I don't see 12governortweaks in system/etc/init.d/ did i do something wrong?
Click to expand...
Click to collapse
Does this make the device stall after you unlock it?
does this trick work? i mean doesn't it freeze phone or what else? and how can i eliminated it?
To everyone asking questions, I've used for about 3 days now. Generally does not lag or freeze when screen is off. Active display still works wonderfully. Only had one freeze and that was when I had a few things running and one app stopped working, so I don't think it was because of this. I haven't noticed a whole lot better standby time (but my screen on time has gotten better so perhaps correlated) so I'd have to check to see if it actually switches governors when screen is off for me
I also changed it a bit because I use faux's kernel and changed it to intelliactive instead of interactive
Big thanks for the script!
oeusr said:
To everyone asking questions, I've used for about 3 days now. Generally does not lag or freeze when screen is off. Active display still works wonderfully. Only had one freeze and that was when I had a few things running and one app stopped working, so I don't think it was because of this. I haven't noticed a whole lot better standby time (but my screen on time has gotten better so perhaps correlated) so I'd have to check to see if it actually switches governors when screen is off for me
I also changed it a bit because I use faux's kernel and changed it to intelliactive instead of interactive
Big thanks for the script!
Click to expand...
Click to collapse
Thanks ! And if i'd want to remove it? How can i do?
Inviato dal mio MOTO X
APeaceofStrange said:
if I don't see 12governortweaks in system/etc/init.d/ did i do something wrong?
Click to expand...
Click to collapse
yes
Does it matter if I'm on stock 4.4.2 or 4.4.3?
rebretz000 said:
Does it matter if I'm on stock 4.4.2 or 4.4.3?
Click to expand...
Click to collapse
Work in any ROM for moto x
ramon20 said:
Work in any ROM for moto x
Click to expand...
Click to collapse
But does it make difference in battery life or not? i mean can u see important changes or not?
acidburn94 said:
But does it make difference in battery life or not? i mean can u see important changes or not?
Click to expand...
Click to collapse
Give it a try and find out. I haven't ran it long enough on the same ROM to make an honest assessment. Can't hurt to give it a whirl. You can always delete the script.
Sent from my Nexus 7 using Tapatalk
Yes it does make a difference in battery. I'm Ru ning the script on my unlocked droid maxx.. I've noticed way better battery life
Sent from my XT1080 using Tapatalk
Ramon..if i install yout deodexed 4.4.3 brasil..i got INIT.D????...can i use the script for TWRP???
Hi,
I've tried different kernel with different roms, DoomKernel, GreaDevs Kernel.
But I cannot overclock the GPU, it says 450Mhz max with any kernel, is there something I've done wrong?
I'm on Z Ultra 6833, please help.
Thank you
Up, please I need to know how to get the GPU overclocking working. Thanks.
Freind u won't get ne reply here, people here are oldies they don't try anything new..they r a great bore..I also wanted to know that BT people here never answer..I think the main reason is the codes are actually dirty coded..so they don't work as they should..if u want some extra performance try using custom roms.
Sent from my C6802 using XDA Free mobile app
kumarrahul said:
Freind u won't get ne reply here, people here are oldies they don't try anything new..they r a great bore..I also wanted to know that BT people here never answer..I think the main reason is the codes are actually dirty coded..so they don't work as they should..if u want some extra performance try using custom roms.
Sent from my C6802 using XDA Free mobile app
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kumarrahul said:
Freind u won't get ne reply here, people here are oldies they don't try anything new..they r a great bore..I also wanted to know that BT people here never answer..I think the main reason is the codes are actually dirty coded..so they don't work as they should..if u want some extra performance try using custom roms.
Sent from my C6802 using XDA Free mobile app
Click to expand...
Click to collapse
Well, I really hoped someone had an answer to fix this. Well I'll keep on trying eventually I'll find a way, if someone can do it, it should be doable on every Z Ultra.
davestone said:
Hi,
I've tried different kernel with different roms, DoomKernel, GreaDevs Kernel.
But I cannot overclock the GPU, it says 450Mhz max with any kernel, is there something I've done wrong?
I'm on Z Ultra 6833, please help.
Thank you
Click to expand...
Click to collapse
This one lists oc up to 600mhz as a feature. Finding a compatible ROM will be your next step.
http://forum.xda-developers.com/showthread.php?t=2730353
adfurgerson said:
This one lists oc up to 600mhz as a feature. Finding a compatible ROM will be your next step.
http://forum.xda-developers.com/showthread.php?t=2730353
Click to expand...
Click to collapse
Thank you, I've tried that kernel, no GPU overclocking possible, neither via any app, or echoing the frequency to the max_oc settings file.
Other than that the kernel it is a total mess, phone couldn't shut off, kept restarting on it's own, the kernel got rid of my recovery.
I tried to flash a new recovery but, rashr couldn't do it, fastboot couldn't do it (even it said flash was ok), and z ultra multi recovery script could not do it.
Ended up restoring an FTF.
Seriously is any developer willing to uncover the mistery of GPU overclock on this device?
Somebody that can use it and wants to tell me it's rom and kernel combination, and how to get this thing working?
I would appreciate, on all the phones I've ever had, if a kernel had GPU overclock, it worked regardlessly of the rom, and echoing with init.d has always worked in the past, with the Z ultra nothing seems to work!!
Sorry for my broken english.
davestone said:
Thank you, I've tried that kernel, no GPU overclocking possible, neither via any app, or echoing the frequency to the max_oc settings file.
Other than that the kernel it is a total mess, phone couldn't shut off, kept restarting on it's own, the kernel got rid of my recovery.
I tried to flash a new recovery but, rashr couldn't do it, fastboot couldn't do it (even it said flash was ok), and z ultra multi recovery script could not do it.
Ended up restoring an FTF.
Seriously is any developer willing to uncover the mistery of GPU overclock on this device?
Somebody that can use it and wants to tell me it's rom and kernel combination, and how to get this thing working?
I would appreciate, on all the phones I've ever had, if a kernel had GPU overclock, it worked regardlessly of the rom, and echoing with init.d has always worked in the past, with the Z ultra nothing seems to work!!
Sorry for my broken english.
Click to expand...
Click to collapse
What is your real purpose of being able to overclock parameters...? Before it was possible with kernels built by chefs but now we have Lollipop 5.1.x, we have stable releases of those (not called stable but they are "stable" in terms of runtime, we have ART which have been improved a lot since its debut. And the Snapdragon 800 powering your device does not put you down even today when its two years old.
If you have perfomance issues with your device..and feel the need to "overclock" either the cpu or the gpu you probably doing something wrong.
The only thing you will achieve by overclocking is your phone starting to cook..with ART the phone heats up very quickly.
More than 2 months i was not able to OC the GPU, doesn't matter the combination of rom and kernel.
If there is anyone that have a clue on how to do it, please help me out.
davestone said:
More than 2 months i was not able to OC the GPU, doesn't matter the combination of rom and kernel.
If there is anyone that have a clue on how to do it, please help me out.
Click to expand...
Click to collapse
https://github.com/Myself5/android_...mmit/09ac36e2c828ae2e270a8a5a3e71ae4fcb470544
validus rom has myself5 kernel
be aware it might damage your phone
If you wnat to overclock your GPU, you must have kernel support, or default is 450MHz