Related
hi
i have a Samsung galaxy s3 clone . it was bought from shop in china . dont know who actually made it .
i made its backup with mtkdroid root tools 2.3 but its corrupted.
i tried few roms and flashed it with wrong preloader and dsp_bl .. which gave me total brick .. no charging . no display. no detection by pc.
after a lot of hit and trial i somehow unbricked it . now it has android 4.0.4 . but it has few problems.
1: Cameras are not working
2: Sim management is greyed out /disabled .. and no imei ..
3: No baseband ..
now since my own created backup is corrupt and this set is not branded so no real way of identifying it how can i find its factory rom ? from which information I can decide whether a ROM is compatible with my device?
all the details along with pics of my set are here ..
These were taken with stock ROM ..
Thanks
it is highly important to have the version info screen shot/picture/details from the factory mode .. so before embarking on any adventure do it asap.. [factory mode can be obtained differently on different devices.. on my device it comes with vol up +power key]
that screen has a whole bunch of info .. and that in conjunction with the about phone menu from android settings menu can tell u with quite certainity which rom is rigth and which is not for u..
match the baseband version and date .. from factory mode of ur device with the one which u intend to flash onto your device)
match the kernel version.. ..
also the kernel version of both roms (original and the one which u intend to flash )should be same in android system info menu which is obtained by going to settings and about phone ..
and the sw version written on the motherboard of your device is actually the kernel version (from my little experience) .
the sw version shown on your board should be same as that in the android about phone menu .. the version wont matter ... (again in my little experience )
i unbricked quite a few devices ...and tried almost half a dozen roms on each device .. actualy 4* ~5 =20 combinations.. so all of the above is from my personal experience..
AND DO NOT flash preloader and dsp_bl .. unless you are unbricking the device .. ( .. or flash if u want to brick it........in other words..)
do share ur experience
and also make a generous use of the china-iphone.ru forum and chinafonini 4pda.ru and some other forums and sites in the hunt for suitable rom
i have problem too, but different clone. mine s4 clone with MTK 6575_01 ( i'm not sure , but i tried to flash by SP flash tool with based ROM mtk 6589. always FAILED )
hi
i have a Samsung galaxy s4 clone . it was bought from shop in batam - ina .
i tried few roms and flashed it with wrong preloader and dsp_bl .. which gave me total brick .. no charging . no display. no detection by pc.
after a lot of hit and trial i somehow unbricked it . now it has android 4.0.4 . but it has few problems.
1: Sim management is greyed out /disabled .. and no imei ..
2: No baseband ..
now since this set is not branded so no real way of identifying it how can i find its factory rom ? from which information I can decide whether a ROM is compatible with my device?
Thanks
and sory for my BAD english
Click to expand...
Click to collapse
SOLVE step by step i did
SOLVE
with this stok rom mtk 6575 .can download from ( d**s.google.com/file/d/0B6uumU74LB_xb0ZNaGRBUWRILWc/edit?usp=sharing replace ** with oc )
then flash with SPflashtool , as i use SP_Flash_Tool_v3.1328.0.183 -->
and don't forget to install MT6575/6577 USB VCOM drivers
when flashing with spf. when inserting a USB from your PC to your phone while holding vol +.
after flash succed. phone unbricked . i was happy
but there's any problem. SIM CARD not detected. no baseband. imei not valid. but camera phone normally.
then i try factory MODE by press power holding vol up
then choose clear eMMC.
reboot phone.
worked by me
invalid imei - use mobile uncle tool
worked. by me
n sorry bad english.
Hope it help you all guys.... please thanks.
Click to expand...
Click to collapse
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
I have the same issue I was trying to install new rom and unfortunately reformat the system drive...if you unroot your phone and ask your manufacturer to repair it or replace it you should have a good acting skills, don't tell them that you were trying to install new ROM because the warranty doesn't include system issues...
GL...
BTW: I wasn't able to find any fix for this issue...I just use my acting skills...LOL
Bricked S5
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
christopher.silan said:
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
Click to expand...
Click to collapse
yes there is always a solution, download stock ROM n flash it find the stock ROM in my signature
An image for flame 2
Hmm maybe if somebody can get us a flame2 image
IM Not sure but by going to QPST Download mode nd connecting it to windows and making a backup image through acronis somebody can help us
And we restore the image using the same method.
Request people to connect qpst mode to linux and give us the boot files as windows cant recognize the partitions.
Im also stuck in a similar problem
hope someone can help
You find solution..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Sort of
kaushal9128 said:
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Click to expand...
Click to collapse
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
I will!!
I will make one soon As I get the Phone in hands.. I sure will... Just have patients !!
Please Do!
Please Do!!
I Have sent my mobile to the service center and it has been over three weeks and still no result.
I'll take it back and do it myself as soon as an image surfaces out.
And Thanks!!
That'll be of great Help
Karbonn s1 Titanium/Cherry Flame 2.0 Partition 3 Backup
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
warmachine68 said:
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
Click to expand...
Click to collapse
:crying::crying::crying:
Yeah Same Happened With Me No Flashing Lights While Trying To Charge..
0k gonna go round..
OK ok I saw this.I know how you feel.Once I soft bricked my Samsung Galaxy S2..That's so bad.Here's possible solution.Download original ROM from somewhere idk you find it.Download Odin.Try to insert new software with it.If it doesn't works I am so so sorry.
As I heard before the only solution for hard bricked devices is.
Go to very tall building,go to top and throw your phone from there and cry..
For Soft Bricked you can fix it easy.You need to install new ROM.
Soft Bricked or Bootlooped is when you hear only sounds.Your phone reacts on charging but you don't see anything and you can boot into recovery and turn on and off your device.
Hard Bricked Device- Well nothing works.Solution is to throw it into junk..
I'll look out somewhere if I can find any solution.
Solution
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
Hey i think i found solution for this but i haven't tried it yet coz i don't have linux http://forum.xda-developers.com/showthread.php?t=2573743 if u find it useful or have any other solution please let me know. I am so upset since when my S1 is hard brickes that i am using nokia 1208 . please msg me if u find the solution
idragon81 said:
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
Click to expand...
Click to collapse
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
kalmukale said:
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
Click to expand...
Click to collapse
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Help!
adubu said:
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Click to expand...
Click to collapse
Can anyone please help us.. on how to build the correct image back up for Cherry mobile flame 2.0, we need a complete package that can be flashed thru EMMC Download... or better yet sir can you make a back up using the emmc Download tool? thanks a bunch!
looking forward to resolve this issue.
Can anyone please... Post a Acronis backup file of Partition3sector for Karbonn titanium S1 please.......
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Sp flash tools - formatted android phone
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
naxilla100 said:
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
Click to expand...
Click to collapse
Same case here but ny device boot, its just doesn't have an operating system as it is formatted
aliranan8 said:
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Click to expand...
Click to collapse
same case here , after formatting , phone won't power on or can't be detected by sp flash tools , please please please , even if i connect a charger it is still not charging , is there hope for my dead phone? my phone is a110
Give it to customer care or flash factory image
Sent from my One V using Tapatalk
phone revived
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Same Problem
I have also the same case and given to service center. I am afraid whether service center will consider it under warranty.
BTW, how did you revive your phone ? I am interested to know.
I have XOLO Q700.
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
How?
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
hey gay i saw your post saiyng that your phone is revived? how you got it? i have a phone dead for sp tools and want to reive it.
wt***
I have the same problem guys I just flash my spice dream uno (android one) with sp flash tool after the flashing my phone is not booting up even now s.p. flasher is not searching my phone.......................
what i have try
1. reinstall drivers.
2. reinstall sp flash tool
3. try it with battry and with out it
4.try to flash it with out virson of s.p. flash tool
5. use new data cabal
but nothing is working
if any one know how to resolve it please help us
:crying::crying: :crying: :crying: :crying:
i formated my intex aqua i5 by the sptools now my phone not detected in sp flash tool through usb i cant find a way to install a firmware again.
please help me ...........................
Hi guys ,
I need your help ..plz
I was flashing new ROM and I was trying to learn how to use TWRP method by installing it via odin .However , the installation has failed and I removed the cable from the device.
NOW, the device is showing only the samsung log Note 3 , and does not boot . The only thing that can goes to it is the download mode as I dont have the recovery installed .
guys ,, what to do ??
I have tried to restore it using the Samsung recovery files but it didnt work ...
What to do guys ,,,,,,,plz help ...
PS : Im downloading the original rom for the device but I think it is .zip file , and the PDA in the odin will not see it , right ???!!
guys ,,,waiting your heeeeelp plz
guys ,
I tried to convert the .zip file into .tar but the odin shows " NAND Write start !! " ..
What to do guys ??
Hello everyone , on trying to upgrade my alcatel v860 to a cyanogenmod 7 system , i had to delete the system partition and custpack partition because this new zip file will replace those current partitions , however i had an issue .
I have the boot , bootloader , recovery & data partitions still active in the phone , i know this because i did not erase those partitions , however since my system partition do not exist and possibly fastboot makes a call to phone /usr/bin files for the upload , i am stuck in the logo of android and i am unable to upload those partitions because right now my windows do not recognize the phone driver .
On fastboot i had android 1.0 driver , but know it turned to unknown device .
After a few looks n the web i realized that the driver that i need is the broadcom usb to serial driver , witch i have here , but somehow it is not installing correctly and right now i have no idea why is that happening .
here it is a picture of the installation .
https://s14.postimg.cc/8mavyxu2p/vodafone.jpg
Does any kind soul around here with time and patience to read this topic in millions of others experience this ?
Is there a way to solve this issue without much sweat ?
If the only solution is jtagging the phone then where can i find the schematic on the phone pins to do it ?
Note : this phone is not in warranty anymore , so send it to the provider is out of subject .
If you have read this topic until here , i thank you .
Best regards to everyone
I discovered that the broadcom to serial driver that i have here with the correct VID for my phone works in XP and i was trying to install it in W7 64bit .
So , the best way is to create a Vrtual XP machine for this issue and add the phone usb port (identifyed as Broadcom) to VM config so the XP can detect it .