I'm still not getting the 1.8.3 update. When I check, it says "Check for update was not available at this time. Try again later."
Is this normal, because they're still doling it out? Or is there a problem?
The message makes it sound like the update service itself was not found, not that there was no update found.
I haven't done anything more radical than root my phone, so I wouldn't think there would be an issue.
If you don't get an OTA notification try this:
http://forum.xda-developers.com/showthread.php?t=1061292
Haphim said:
I'm still not getting the 1.8.3 update. When I check, it says "Check for update was not available at this time. Try again later."
Is this normal, because they're still doling it out? Or is there a problem?
The message makes it sound like the update service itself was not found, not that there was no update found.
I haven't done anything more radical than root my phone, so I wouldn't think there would be an issue.
Click to expand...
Click to collapse
I'm assuming your did this over wifi. If not, try over wifi.
Sent from my MB860 using Tapatalk
jjwatmyself said:
I'm assuming your did this over wifi. If not, try over wifi.
Click to expand...
Click to collapse
I know I need wifi to download the update, but I didn't think I needed it to *check* the update.
But can someone confirm that the message I received is standard to no update being available, rather than the update *service* not being available?
Normal message is:
Your device is up to date.
No update is necessary at this time.
OK (button)
CaelanT said:
Normal message is:
Your device is up to date.
No update is necessary at this time.
OK (button)
Click to expand...
Click to collapse
You certainly ate right on that. I updated with RDS Lite as was sick of waiting too.
Sent from my MB860 using Tapatalk
CaelanT said:
Normal message is:
Your device is up to date.
No update is necessary at this time.
OK (button)
Click to expand...
Click to collapse
Okay, then what does it mean that I keep getting "Check for update was not available at this time. Try again later."?
Will this process root my tmobile mytouch 3g?
youtube.com/watch?v=o8BZYEBsSws
Or will this no longer work since i have android 2.2.1 on my phone?
You'll have to add the www before that link cause this forum wouldnt let me put a link on here until i have 8 posts apparently.
It should work. Try it and see.
Ok, it says its reading the file but then says unknown fail, update fail.
injo503 said:
Ok, it says its reading the file but then says unknown fail, update fail.
Click to expand...
Click to collapse
Try this instead: http://forum.xda-developers.com/showthread.php?p=10824837#post10824837.
I have an asia retail device and when I tried to update it to ics it got stuck and stuff like that, so i decided to reset it to factory and now it says that the device is "up to date" but its version is only 2.3.6
what should i do?
ipansky said:
I have an asia retail device and when I tried to update it to ics it got stuck and stuff like that, so i decided to reset it to factory and now it says that the device is "up to date" but its version is only 2.3.6
what should i do?
Click to expand...
Click to collapse
Update: As vash_h points out below, you have a different phone. Don't install this update. Good catch.
Here's what I had said before:
Snags697 said:
You could search for a download of the update and install it manually. The MD5 of the update is 79a1ee4a992eacd1d08f98dee5deebf7 if the filename is Blur_Version.6.12.181.XT912.Verizon.en.US.zip. That's what my US Droid Razr Maxx downloaded automatically. (Thanks to http://forum.xda-developers.com/showthread.php?t=1732614 for the info, but not the download.)
Good instructions (again, without the update download): http://forum.xda-developers.com/showthread.php?t=1692694
Click to expand...
Click to collapse
is there a way to get the official update and not a leak?
The filename and MD5 hash I gave are the actual update. My phone got it directly from Verizon and I ran the md5sum program on that file.
-Snags
ipansky said:
is there a way to get the official update and not a leak?
Click to expand...
Click to collapse
Don't install it. Your on Asia retail, meaning xt910. The update file is for xt912..
Sent from my ICS Razr XT910
Can someone help me pleasee? my phone doesnt work after i flashed Jmz Kernel and i forgot to do a backup of my kernel, can someone help me please???? Please send me your kernel
first give some information about your phone like rom version, country.
porozex said:
first give some information about your phone like rom version, country.
Click to expand...
Click to collapse
Im using the UK one
kingjo23 said:
Im using the UK one
Click to expand...
Click to collapse
You can try to flash the attached A3UL_1.31.xxx.3_Kernel+wp_mod.zip. It's compiled by me from latest UK kernel sources on htcdev.
MiniBlu
MiniBlu said:
You can try to flash the attached A3UL_1.31.xxx.3_Kernel+wp_mod.zip. It's compiled by me from latest UK kernel sources on htcdev.
MiniBlu
Click to expand...
Click to collapse
Thanks for your help, now my WiFi and Bluetooth doesn't work, it says not in range even though it is.
Do you know how to fix that? Please help me.....
kingjo23 said:
Can someone help me pleasee? my phone doesnt work after i flashed Jmz Kernel and i forgot to do a backup of my kernel, can someone help me please???? Please send me your kernel
Click to expand...
Click to collapse
I had the same problem. I flashed the asian rom and now i have no issues with it.
kingjo23 said:
Thanks for your help, now my WiFi and Bluetooth doesn't work, it says not in range even though it is.
Do you know how to fix that? Please help me.....
Click to expand...
Click to collapse
What software version is your phone actually running? To find this go into "settings", "about", "software information" and tell me the "software number" and "rom version". As long as these numbers match up with the kernel then then I can add in the wifi drivers that get compiled at the time the kernel is compiled into the zip but this shouldn't really be required and didn't want to put them in wiith out being sure they would match with the rest of your rom.
Also after flashing a kernel sometimes things left over in cache and dalvic cache from running the old kernel causes problems with wifi. To fix this you can try to go into recovery and choose "wipe", "advanced wipe" and check the "cache", and "dalvic cache" boxes then wipe. Also reboot your router.
Can you also check that the kernel flashed properly. Go into "settings", "software information", "more" and tell me what is listed under "kernel version".
MiniBlu
Ruman911 said:
I had the same problem. I flashed the asian rom and now i have no issues with it.
Click to expand...
Click to collapse
Can You send me the link please, i can find the correct one because there are many backups, thanks for your time and support.
MiniBlu said:
What software version is your phone actually running? To find this go into "settings", "about", "software information" and tell me the "software number" and "rom version". As long as these numbers match up with the kernel then then I can add in the wifi drivers that get compiled at the time the kernel is compiled into the zip but this shouldn't really be required and didn't want to put them in wiith out being sure they would match with the rest of your rom.
Also after flashing a kernel sometimes things left over in cache and dalvic cache from running the old kernel causes problems with wifi. To fix this you can try to go into recovery and choose "wipe", "advanced wipe" and check the "cache", and "dalvic cache" boxes then wipe. Also reboot your router.
Can you also check that the kernel flashed properly. Go into "settings", "software information", "more" and tell me what is listed under "kernel version".
MiniBlu
Click to expand...
Click to collapse
My kernel version is 3.4.0-g5ad..........
.... [email protected] #1
kingjo23 said:
My kernel version is 3.4.0-g5ad..........
.... [email protected] #1
Click to expand...
Click to collapse
In that case the kernel I sent you didn't flash properly as its not a jmz kernel. probably just the modules flashed. I'll test it again here and repost it for you. can tou still check and tell what you sofware number and rom version are? You can find them where I said in the last post.
MiniBlu said:
In that case the kernel I sent you didn't flash properly as its not a jmz kernel. probably just the modules flashed. I'll test it again here and repost it for you. can tou still check and tell what you sofware number and rom version are? You can find them where I said in the last post.
Click to expand...
Click to collapse
I attached a screenshot of my details now, I reflashed your kernel but still no changes
kingjo23 said:
I attached a screenshot of my details now, I reflashed your kernel but still no changes
Click to expand...
Click to collapse
Ok. I dropped the wrong boot img in the zip. thats the asia kernel. but can you screenshot the page before the one you attached. thats the page that shows your sofware number and rom version. That will tell me the propper boot img to give you.
MiniBlu said:
Ok. I dropped the wrong boot img in the zip. thats the asia kernel. but can you screenshot the page before the one you attached. thats the page that shows your sofware number and rom version. That will tell me the propper boot img to give you.
Click to expand...
Click to collapse
Sorry for replying late was at work
MiniBlu said:
Ok. I dropped the wrong boot img in the zip. thats the asia kernel. but can you screenshot the page before the one you attached. thats the page that shows your sofware number and rom version. That will tell me the propper boot img to give you.
Click to expand...
Click to collapse
here is the screenshot
kingjo23 said:
here is the screenshot
Click to expand...
Click to collapse
your acctually currently runing a stock asia rom which I asume you must have flashed my original asia backup at some point but for best compatibility on a uk phone I sugest you flash an eu rom(at least the major version matches what you phone should be running). You can download one here:
https://drive.google.com/file/d/0B_C-OhmCtZWAZE9PUlFSdWtWaXc/view?usp=sharing
-first in twrp select wipe and swipe to factory reset(you may get conflicts if you don't)
-flash the the file linked above
-wipe dalvic & cache
-reboot
-setup wifi and google account
-test everything is working ok
-follow instructions on this thread http://forum.xda-developers.com/desire-610/development/mod-wpmod-disable-write-protection-t3149168 to get root and disable write protection on the system patition
you will then be able to apply fixes and mods to the rom without complicated recovery procedures.(take a full backup before trying modifications so you have a stable point to go back to).
MiniBlu
MiniBlu said:
your acctually currently runing a stock asia rom which I asume you must have flashed my original asia backup at some point but for best compatibility on a uk phone I sugest you flash an eu rom(at least the major version matches what you phone should be running). You can download one here:
https://drive.google.com/file/d/0B_C-OhmCtZWAZE9PUlFSdWtWaXc/view?usp=sharing
-first in twrp select wipe and swipe to factory reset(you may get conflicts if you don't)
-flash the the file linked above
-wipe dalvic & cache
-reboot
-setup wifi and google account
-test everything is working ok
-follow instructions on this thread http://forum.xda-developers.com/desire-610/development/mod-wpmod-disable-write-protection-t3149168 to get root and disable write protection on the system patition
you will then be able to apply fixes and mods to the rom without complicated recovery procedures.(take a full backup before trying modifications so you have a stable point to go back to).
MiniBlu
Click to expand...
Click to collapse
I did as you said and now my WifI TURNED ON HAHA Thanks for your help, im really grateful to you
My WiFi says not in in range even though it is, it doesn't see any other network too, it was working really fine yesterday and now it doesn't work anymore.
My phone will not download latest Android 11 update (October). Would like to manually install OTA. How to fix Recovery mode so I can.
I figured it out, please delete.
debido666 said:
I figured it out, please delete.
Click to expand...
Click to collapse
You should probably upload how you fixed it in case others have the same trouble instead of deleting the thread