I'' just move straight into topic. I have compiled TWRP using Omni 6.0 sources, Compile went success, I am gonna make it official support for this device if TWRP boots
Test:
Downloads:
twrp-3.0.2-3-gemini.img <== New Build
twrp-3.0.2-2-gemini.img
twrp-3.0.2-1-gemini.img
twrp-3.0.2-0-gemini.img
Device Tree: Not available for security reasons.
If its working/not-working please post in the comment section.
- HostZero
XDA:DevDB Information
[TWRP][gemini] TWRP 3.0.2-0 Testing, Tool/Utility for the LeEco Le Max 2
Contributors
HostZero
Version Information
Status: Testing
Created 2016-06-11
Last Updated 2016-06-11
HostZero said:
I'' just move straight into topic. I have compiled TWRP using Omni 6.0 sources, Compile went success, I am gonna make it official support for this device if TWRP boots
Test:
Downloads:
twrp-3.0.2-0-gemini.img
Device Tree: Not available for security reasons.
If its working/not-working please post in the comment section.
- HostZero
XDA:DevDB Information
[TWRP][gemini] TWRP 3.0.2-0 Testing, Tool/Utility for the LeEco Le Max 2
Contributors
HostZero
Version Information
Status: Testing
Created 2016-06-11
Last Updated 2016-06-11
Click to expand...
Click to collapse
Hi, master.
During TWRP boot up right hand middle screen are broken, shows many colours, like TWRP 3.0 before last one. After ten seconds or more boot up TWRP properly, but you don´t see anything during boot up until TWRP show menu.
Regards.
STEVE_MARS said:
Hi, master.
During TWRP boot up right hand middle screen are broken, shows many colours, like TWRP 3.0 before last one. After ten seconds or more boot up TWRP properly, but you don´t see anything during boot up until TWRP show menu.
Regards.
Click to expand...
Click to collapse
So, do you mean TWRP is booting and issue is with graphics?
STEVE_MARS said:
Hi, master.
During TWRP boot up right hand middle screen are broken, shows many colours, like TWRP 3.0 before last one. After ten seconds or more boot up TWRP properly, but you don´t see anything during boot up until TWRP show menu.
Regards.
Click to expand...
Click to collapse
test the new twrp-3.0.2-1-gemini.img
HostZero said:
So, do you mean TWRP is booting and issue is with graphics?
Click to expand...
Click to collapse
It´s very difficult for me explain in English .
Yes, TWRP works but meanwhile boot up it´s same issue that other version TWRP, half of the screen are full or colours, like old TV´s. User can´t know if TWRP are boot up or not because on screen only show this, and after ten-twelve seconds screen show TWRP OK.
---------- Post added at 09:03 AM ---------- Previous post was at 09:03 AM ----------
HostZero said:
test the new twrp-3.0.2-1-gemini.img
Click to expand...
Click to collapse
Give me the link, please :good:
STEVE_MARS said:
It´s very difficult for me explain in English .
Yes, TWRP works but meanwhile boot up it´s same issue that other version TWRP, half of the screen are full or colours, like old TV´s. User can´t know if TWRP are boot up or not because on screen only show this, and after ten-twelve seconds screen show TWRP OK.
---------- Post added at 09:03 AM ---------- Previous post was at 09:03 AM ----------
Give me the link, please :good:
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24588239633383558 TWRP 3.0.2-1
HostZero said:
https://www.androidfilehost.com/?fid=24588239633383558 TWRP 3.0.2-1
Click to expand...
Click to collapse
Same issue. This is the problem:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You must wait until screen off automatically, and when push power to screen on, TWRP are ready.
STEVE_MARS said:
Same issue. This is the problem:
You must wait until screen off automatically, and when push power to screen on, TWRP are ready.
Click to expand...
Click to collapse
So I find now TWRP is booting, but issue has raises before TWRP. Ok. I will try to fix.
Last Doubt: Is even TWRP like this. With the screen issue?
HostZero said:
So I find now TWRP is booting, but issue has raises before TWRP. Ok. I will try to fix.
Last Doubt: Is even TWRP like this. With the screen issue?
Click to expand...
Click to collapse
Nope, TWRP is absolutely normal.
STEVE_MARS said:
Nope, TWRP is absolutely normal.
Click to expand...
Click to collapse
OK that, I will try to fix that issue,
1. How did you turn on TWRP in this case?
2. Please be testing other features of possible.
HostZero said:
OK that, I will try to fix that issue,
1. How did you turn on TWRP in this case?
2. Please be testing other features of possible.
Click to expand...
Click to collapse
1. You must wait until screen off automatically, power button to screen off don´t work. When screen off auto, then push power button to screen on and TWRP are there, perfect.
2. I try other things, but when screen isuue nothing happens. Screen touch don´t work, power button don´t work. Only wait to screen off automatically.
STEVE_MARS said:
1. You must wait until screen off automatically, power button to screen off don´t work. When screen off auto, then push power button to screen on and TWRP are there, perfect.
2. I try other things, but when screen isuue nothing happens. Screen touch don´t work, power button don´t work. Only wait to screen off automatically.
Click to expand...
Click to collapse
Thankyou for quick replies.
I thinthink issues are with kernel. If you have a stock recovery. img please provide me, most probably replacing kernel will fix!
HostZero said:
Thankyou for quick replies.
I thinthink issues are with kernel. If you have a stock recovery. img please provide me, most probably replacing kernel will fix!
Click to expand...
Click to collapse
I have installed a test custom rom with this TWRP http://revolutionlemax2.blogspot.com.es/2016/05/nuevo-twrp-para-lemax2-x820-by-bbsydsscn.html
Serves you decompiled boot.img, or this TWRP that works OK?.
If not, I try flash stock ROM and get recovery.img via adb, but now I try solve a gapps issue to develope multilanguage custom rom.
STEVE_MARS said:
I have installed a test custom rom with this TWRP http://revolutionlemax2.blogspot.com.es/2016/05/nuevo-twrp-para-lemax2-x820-by-bbsydsscn.html
Serves you decompiled boot.img, or this TWRP that works OK?.
If not, I try flash stock ROM and get recovery.img via adb, but now I try solve a gapps issue to develope multilanguage custom rom.
Click to expand...
Click to collapse
Not an issue, if that booted fine for you. I will download and get the new kernel.
HostZero said:
Not an issue, if that booted fine for you. I will download and get the new kernel.
Click to expand...
Click to collapse
Ok, if you need something else tell me, please.
STEVE_MARS said:
Ok, if you need something else tell me, please.
Click to expand...
Click to collapse
Began to Compile:
I have extracted
kernel/zImage
fastab.ranchu
fstab.goldfish
uevented.ranchu.rc
uevented.goldfish.rc
---Most probably that issue will be fixed---
@STEVE_MARS
Test the New recovery.
TWRP 3.0.2-2: https://www.androidfilehost.com/?fid=24580943222146855
Guys. Quick Question:
Why should I use These gemini versions when twrp is working?
katze94 said:
Guys. Quick Question:
Why should I use These gemini versions when twrp is working?
Click to expand...
Click to collapse
Pride ?
---------- Post added at 02:37 PM ---------- Previous post was at 02:31 PM ----------
HostZero said:
@STEVE_MARS
Test the New recovery.
TWRP 3.0.2-2: https://www.androidfilehost.com/?fid=24580943222146855
Click to expand...
Click to collapse
Perfect ¡¡¡
This afternoon test backup/restore/flash
Great ¡¡¡ :highfive:
STEVE_MARS said:
Pride ?
---------- Post added at 02:37 PM ---------- Previous post was at 02:31 PM ----------
Perfect ¡¡¡
This afternoon test backup/restore/flash
Great ¡¡¡ :highfive:
Click to expand...
Click to collapse
Soon you will find TWRP on dl.twrp.me/gemini
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI.us Is Proud To Present
MIUI v4 2.5.25 For Nexus One
Installation Instructions:
Click to expand...
Click to collapse
Place ROM zip file in your SD card
Boot into recovery
Create a backup
Factory reset device
Install zip from SD card
Reboot and enjoy!
Click to expand...
Click to collapse
Not Working:
Click to expand...
Click to collapse
???????????
Click to expand...
Click to collapse
Downloads:
Click to expand...
Click to collapse
2.5.11 - download | MD5 - d8629db72ffa339ecc7b30325af6491f
If you repartitioned your device you will want to download 2.5.25.-blackrose
2.5.25-blackrose - download
Previous Builds
Click to expand...
Click to collapse
Changelogs:
Click to expand...
Click to collapse
ROM Changelog:
Click to expand...
Click to collapse
Native USB support now including USB tethering.
Now based on Android 4.0.4 - 4/6/2012
MIUI Changelog
Click to expand...
Click to collapse
PLEASE DO NOT MIRROR OR LINK TO THE DOWNLOADS WITHOUT PERMISSION
May I see some screenshots?
Great! The day after I take the plunge with black rose!
Sent from my Nexus One using XDA App
Is App2Ext or something like this included?
crush41 said:
Is App2Ext or something like this included?
Click to expand...
Click to collapse
Not at the moment. But I'll add that to the request list.
Downloading, testing with Blackrose and original partition
update: just realized that I don't know whether barcode scanner works or not? Need this as all my Gmail accounts has 2-step authentication on
Do we need to flash this: hboot_220-16-200.nb0 ? As in that partition sizes?
Androidity3000 said:
Do we need to flash this: hboot_220-16-200.nb0 ? As in that partition sizes?
Click to expand...
Click to collapse
No, OP says no Blackrose or repartitioning needed!
woozyking said:
No, OP says no Blackrose or repartitioning needed!
Click to expand...
Click to collapse
Sorry, my bad. I for some reason skipped reading the word "not" in the OP lol. I will try this ROM out now and give a full review in just a bit.
EDIT: Seem to have problems. Zip is not signed correctly and after I install I just get to the MIUI boot logo and it gets stuck there. I tried to download it again / wipe / reflash and still no luck... Will continue trying. Anyone get this to work yet?
Androidity3000 said:
Sorry, my bad. I for some reason skipped reading the word "not" in the OP lol. I will try this ROM out now and give a full review in just a bit.
EDIT: Seem to have problems. Zip is not signed correctly and after I install I just get to the MIUI boot logo and it gets stuck there. I tried to download it again / wipe / reflash and still no luck... Will continue trying. Anyone get this to work yet?
Click to expand...
Click to collapse
It could be Blackrose, get stock hboot and give it another shot? I haven't started trying this yet, since I need to use my phone to be stable these days, I flashed it back to GB.
woozyking said:
It could be Blackrose, get stock hboot and give it another shot? I haven't started trying this yet, since I need to use my phone to be stable these days, I flashed it back to GB.
Click to expand...
Click to collapse
Just a heads up, this has been my daily runner for 4 days now. Well MIUI ICS that is. I started working on this when 2.1.20 was available for the Nexus S and 2.2.3 seems to be the most stable yet.
I have no problem using this on a day to day basis.
woozyking said:
Downloading, testing with Blackrose and original partition
update: just realized that I don't know whether barcode scanner works or not? Need this as all my Gmail accounts has 2-step authentication on
Click to expand...
Click to collapse
hey mate, is trackball wake function work?
Thanks
New Mirror http://up.4share.vn/f/3f0d0e080b090f09/MIUI.us_passion_4.0.3.2.2.3_0xD34D.zip
nhatientri said:
hey mate, is trackball wake function work?
Thanks
Click to expand...
Click to collapse
It sure is. I have a Nexus One with a non-functioning power buttons so this was a must for me to begin with.
woozyking said:
It could be Blackrose, get stock hboot and give it another shot? I haven't started trying this yet, since I need to use my phone to be stable these days, I flashed it back to GB.
Click to expand...
Click to collapse
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Androidity3000 said:
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Click to expand...
Click to collapse
Got the verification error in clockwork too, disabled, flashed. Got stuck on the boot logo. Flashed 2.2.3 again and everything was messed up badly, apps force closing all over the place and what not. Going to try with a stock hboot later since my phone is messed up anyway. And yeah, I'm the kind of guy who prefers to setup everything from scratch once or twice a year when stuff breaks instead of wasting time with backups every couple of days when I flash something different
Androidity3000 said:
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Click to expand...
Click to collapse
Have you verified the MD5 hash against: 62002bddc589f73b01ca0102ba501efb
---------- Post added at 12:13 AM ---------- Previous post was at 12:05 AM ----------
lithium76 said:
Just a heads up, this has been my daily runner for 4 days now. Well MIUI ICS that is. I started working on this when 2.1.20 was available for the Nexus S and 2.2.3 seems to be the most stable yet.
I have no problem using this on a day to day basis.
Click to expand...
Click to collapse
That's good to know
However after using the other two ICS builds (Texas and MeDroid), I realized that without that single barcode scanner functionality I can't even do my daily work (and really don't want to just turn off 2-step verification of all Google product for that)
Yet multi-account chat on Google Talks really tastes good! Interested to see if someone has ported the ICS version to GB yet.
---------- Post added at 12:14 AM ---------- Previous post was at 12:13 AM ----------
nhatientri said:
hey mate, is trackball wake function work?
Thanks
Click to expand...
Click to collapse
I installed it for a brief moment and everything was natural - so yes, I think I did not notice the oddness of not using the trackball to wake the phone.
Not enough storage
Sent from my Nexus One using XDA App
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
last time I tried Miui ICS, I needed to flash a weekly first. (Galnet)
Sent from my Nexus One using Tapatalk
Androidity3000 said:
I completely uninstalled Blackrose and was on stock bootloader. The install was fine, It just kept freezing on the MIUI boot logo. Did you all get a sig verification error when trying to install? I had to toggle the verification process on AmonRA.
Click to expand...
Click to collapse
Hi,
I may be wrong here,,, but when you say STOCK BOOTLOADER, have you also
put back the STOCK PARTITION,,, as per me it is just not enough to remove Blacrose.... In the Blackrose thread you will find the partition sizes for different roms,,, for MIUI its different... i dont have it offhand,, but you can do a search and find it as it is in one of the posts... so IF THIS IS TRUE,, then MIUI will always get stuck at the X or MIUI boot logo. So you need to flash the partition with appropriate size for MIUI.
Maybe i am wrong, but there is no harm in trying....
regards
greg
Disclaimer: I am not responsible for anything you do to your device but I will do my best to assist if something goes wrong!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation
Download the rom, gapps of your choosing.
Reboot to cwm or twrp whichever you choose to use. (must be the newest version)
Wipe data/Factory reset
Flash Rom
Flash “gapps
REBOOT !!!
Changelog
Code:
01/01/2014 second build
Rom control added back in
AOKP custom toggles
plus some bug fixes
runs nice and Smooth now;)
12-12-2013 first build,
this is pretty much stock android right now but there will be more to come!
Downloads
Newest AOKP builds are here!
Gapps: http://forum.xda-developers.com/showthread.php?t=2012857
Sources
AOKP sources: https://github.com/aokp
kernel: https://github.com/cmbroms/android_kernel_lge_awifi
Credits
aosp
AOKP
CMB ROMS
team BAKED
CyanogenMod
@nycbjr
@djrbliss for his loki patch
and anyone else who has helped me out along the way
If you are left out and feel you should receive credit please PM
one
two
Ill give this a go, thanks
---------- Post added at 10:37 AM ---------- Previous post was at 10:00 AM ----------
Ok flashed no issues, couple of issues once in use
1. Auto Rotate inst working on initial boot up, reboot fixes that
2. the audio is low, much lower than stock for the external speakers, this has been an issue on all 3 roms so far
This rom does see my SD Card unlike the others and i also have no issue with 5gnz wifi like i did with the other, only thing so far that needs a teak is speaker volume, otherwise its all good thanks
angry english said:
Ill give this a go, thanks
---------- Post added at 10:37 AM ---------- Previous post was at 10:00 AM ----------
Ok flashed no issues, couple of issues once in use
1. Auto Rotate inst working on initial boot up, reboot fixes that
2. the audio is low, much lower than stock for the external speakers, this has been an issue on all 3 roms so far
This rom does see my SD Card unlike the others and i also have no issue with 5gnz wifi like i did with the other, only thing so far that needs a teak is speaker volume, otherwise its all good thanks
Click to expand...
Click to collapse
thanks for the feedback helps me figure out what needs to be fixed
sweet man! nexus shmexus. :laugh:
Drgravy said:
two
Click to expand...
Click to collapse
By stock Android you mean AOSP/GPE, correct? What is the kernel based off - stock lg, AOSP?
Sent from my Nexus 5 using XDA Premium 4 mobile app
jonup said:
By stock Android you mean AOSP/GPE, correct? What is the kernel based off - stock lg, AOSP?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AOKP is based on AOSP.
Drgravy said:
thanks for the feedback helps me figure out what needs to be fixed
Click to expand...
Click to collapse
nycjbr was able to fix the auto-rotate on first boot issue (and other rotation issues) by switching out the sensors.msm8960.so file, might help here? I've no idea what might be different between the file he posted and the one you include.
http://forum.xda-developers.com/showpost.php?p=48362419&postcount=44
I'll definitely be switching over once the speaker level issue is sorted out. Thanks for your work!
jonup said:
By stock Android you mean AOSP/GPE, correct? What is the kernel based off - stock lg, AOSP?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes AOSP same kernel as cmb
evilhunter101 said:
nycjbr was able to fix the auto-rotate on first boot issue (and other rotation issues) by switching out the sensors.msm8960.so file, might help here? I've no idea what might be different between the file he posted and the one you include.
http://forum.xda-developers.com/showpost.php?p=48362419&postcount=44
I'll definitely be switching over once the speaker level issue is sorted out. Thanks for your work!
Click to expand...
Click to collapse
hopefully we can get the speaker level sorted soon
do i need to be rooted for me to install this? I haven't rooted my stuff in a long time, so i've forgotten much of xda related stuff. would this install also void my warranty?
mx499 said:
do i need to be rooted for me to install this? I haven't rooted my stuff in a long time, so i've forgotten much of xda related stuff. would this install also void my warranty?
Click to expand...
Click to collapse
Yeah and custom recovery, rooting is super simple, twrp is some and commands, nothing daunting, as for warranty... most companies frown upon modifying your device, if you had a warranty issue there is a good guide on here how.to get back to stock that's quite simple
Sent from my LG-V500 using xda app-developers app
Nice work man! Keep it up
I suppose that this ROM doesn't change anything about the awful sound of the tab. It's purely hardware I guess..
I tried flashing this file in TWRP and it failed. It just went to a screen with a picture of a dead android.
I'm assuming that the install crapped out because I don't have the latest version of TWRP? If this is the case, is there a flashable zip of it somewhere?
Thanks.
shampiaj said:
I tried flashing this file in TWRP and it failed. It just went to a screen with a picture of a dead android.
I'm assuming that the install crapped out because I don't have the latest version of TWRP? If this is the case, is there a flashable zip of it somewhere?
Thanks.
Click to expand...
Click to collapse
Yeah its in the twrp thread 2.3.6.1
Sent from my LG-V500 using xda app-developers app
Hi. does this work with the v510 version as well?
Sent from my Nexus 7 using Tapatalk 2
mpmilestogo said:
Hi. does this work with the v510 version as well?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
no not yet
Ahhhhh! I managed to flash the rom and now i'm stuck in a bootloop! Help!
You didn't factory reset before flashing, I know this as I did it 1st time, you need to go look in the twrp thread and do the button combo to bring up the reset screen, at that point you can adb reboot recovery, wipe (factory restore) then flash the rom, then flash the gapps
This is the post, download mode is what you need to get into
Drgravy said:
it will work!
you need to put your tablet in download mode first
(this can be a lil tricky)
with your usb unplugged power down your tab hold the power button in till it shuts off
then release it the quickly push both volume up and down then quickly plug in your usb cable
that will put it into download mode
and just follow the instructions in that thread
Click to expand...
Click to collapse
Also in the general forum you will find a way to recover back to stock that's very easy
Sent from my LG-V500 using xda app-developers app
Smartisan OS is a highly refined and customized version of Android from Smartisan Technology. Smartisan OS for the OnePlus One preserves Smartisan’s distinctive interface, intuitive interactions, and numerous thoughtfully designed features.
Smartisan OS Introduction: http://www.smartisan.com/en/t2/#/os
Kernel Source: Smartisan OS is based on standard CM, and you may find the kernel source of this v2.6.3 OPO version from this url: https://github.com/CyanogenMod/andro...neplus_msm8974
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Important Notes
Smartisan OS v2.6.3 for OnePlus One has currently only been tested on OnePlus One phones specifically, and it is not recommended that you install this version of the OS on other brands or models of phones.
Be sure to back up your data before installing the OS.
If you run into any problems with the software or system, please post a direct reply in this thread or reach us in our Facebook or Twitter. For questions about hardware or warranties, please consult the customer service or tech support departments of your phone’s manufacturer.
Installing a new OS on a phone carries some risk, and should be done with caution. Downloading “Smartisan OS” and installing it means that you are fully aware of these risks. Smartisan is not responsible for any problems that might result.
Changelog
Added: Folder functionality in Notes App, supporting creation, editing, and deletion of folders, useful for categorizing and managing your notes.
Added: Translucent theme.
Added: Customizable notification bar shortcuts.
Added: Multiple compression ratios supported for GIF generating.
Added: Markup for scrolling screenshots.
Added: Support for viewing all mail attachments in Downloads.
Added: Support for OTG.
Fixed: Fix CVE 6602-2015 vulnerability.
Related Resources
Download: Guide For Installing Smartisan OS v2.6.3_OnePlus One.pdf
Download: Smartisan OS v2.6.3 for OnePlus One_User Bacon & Recovery.zip
well can we add the on screen nav bars? got bootloop on v2.6.2 as its based on cyanogenmond !
Does it supports Arabic language
is this the 3rd thread?
i would like to try this!!!
Dhairya said:
well can we add the on screen nav bars? got bootloop on v2.6.2 as its based on cyanogenmond !
Click to expand...
Click to collapse
is it working properly???no bugs listed here!!
thanks!!
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
hi! @xcjchandler
im up to trying this..as someone says bootloop above,,does it really??
and if you've tested this,, can you tell me the bugs if any present???
BTW awesome work there..thanks!!
---------- Post added at 06:51 PM ---------- Previous post was at 06:20 PM ----------
installed smartisan recovery and successfully booted into it!
followed every step correctly...wipe data/factory reset ,then wipe cache partitions and then apply update..
it said FAILED!!
LITTLE HELP PLEASE!
thilak devraj said:
is it working properly???no bugs listed here!!
thanks!!
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
hi! @xcjchandler
im up to trying this..as someone says bootloop above,,does it really??
and if you've tested this,, can you tell me the bugs if any present???
BTW awesome work there..thanks!!
---------- Post added at 06:51 PM ---------- Previous post was at 06:20 PM ----------
installed smartisan recovery and successfully booted into it!
followed every step correctly...wipe data/factory reset ,then wipe cache partitions and then apply update..
it said FAILED!!
LITTLE HELP PLEASE!
Click to expand...
Click to collapse
well i didn't try that nav bars i am asking will it cause bootloop?
thilak devraj said:
installed smartisan recovery and successfully booted into it!
followed every step correctly...wipe data/factory reset ,then wipe cache partitions and then apply update..
it said FAILED!!
LITTLE HELP PLEASE!
Click to expand...
Click to collapse
Smartisan recovery is NOT WORKING. Try to flash with this recovery. Work properly for me..
Home Launcher...
Loved the ROM.... flashed it once and now back in XOSP.... Love to try this again... any way to change this default launcher.... I like the normal launcher style.....
Dhairya said:
well can we add the on screen nav bars? got bootloop on v2.6.2 as its based on cyanogenmond !
Click to expand...
Click to collapse
Sorry, could you be a little bit more specific about the screen nav bars? If you could share a screenshot, that would be best. I just don't get it what nav bar you're referring to now.
bashar.abu.diak said:
Does it supports Arabic language
Click to expand...
Click to collapse
Sorry, it's not.
maxed4901 said:
is this the 3rd thread?
Click to expand...
Click to collapse
No, not a 3rd-party thread, this is an official version. I'm a team member of Smartisan.
xcjchandler said:
Sorry, could you be a little bit more specific about the screen nav bars? If you could share a screenshot, that would be best. I just don't get it what nav bar you're referring to now.
Click to expand...
Click to collapse
well on screen keys !
thilak devraj said:
is it working properly???no bugs listed here!!
thanks!!
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
hi! @xcjchandler
im up to trying this..as someone says bootloop above,,does it really??
and if you've tested this,, can you tell me the bugs if any present???
BTW awesome work there..thanks!!
---------- Post added at 06:51 PM ---------- Previous post was at 06:20 PM ----------
installed smartisan recovery and successfully booted into it!
followed every step correctly...wipe data/factory reset ,then wipe cache partitions and then apply update..
it said FAILED!!
LITTLE HELP PLEASE!
Click to expand...
Click to collapse
Hi, you have a screenshot or picture of the failure prompt? It would be very helpful for us to troubleshoot.
And I would like to know if your OPO is encrypted before you flash?
Thanks.
xcjchandler said:
Hi, you have a screenshot or picture of the failure prompt? It would be very helpful for us to troubleshoot.
And I would like to know if your OPO is encrypted before you flash?
Thanks.
Click to expand...
Click to collapse
hey, i tried another way.. and it worked!!
first i wiped the system and data and then flashed the old smartisan recovery and flashed the rom...
this time.. it worked!!thanks!
Dhairya said:
well can we add the on screen nav bars? got bootloop on v2.6.2 as its based on cyanogenmond !
Click to expand...
Click to collapse
Hey, as long as you follow our flash guide, there won't be a bootloop.
How you get the v2.6.2? We don't release the international version of v2.6.2.
Please make the ROM to be TWRP flash compatible. Including OTA. This way it is easy to make nandroid backups of other Roms and encourage people to try Smartisan.
And of course the obvious next question. Any idea when we can see Marshmallow based Smartisan for OPO?
Thanks for all the support. Makes me happy to own and use OPO with all the many official ROM support
Sent from my Lenovo X3a40 using Tapatalk
Mirror to download?
Any mirror? Painfully slow as hell and kept failing downloading from the link in 1st post.
siva-kumar said:
Please make the ROM to be TWRP flash compatible. Including OTA. This way it is easy to make nandroid backups of other Roms and encourage people to try Smartisan.
And of course the obvious next question. Any idea when we can see Marshmallow based Smartisan for OPO?
Thanks for all the support. Makes me happy to own and use OPO with all the many official ROM support
Sent from my Lenovo X3a40 using Tapatalk
Click to expand...
Click to collapse
+1
Installed 2.6.3 using TWRP 3+ by Tugapower.
Installed Google Apps from Smartisan Store.
Activated Inbuilt root.
Had problems restoring apps using Backup+
Changed and Flashed TWRP Tugapower using Flashify.
Installed Root SuperSu 2.74
Restored all apps using Backup+
Running super.
No bootloops.
Await further official updates or....
Sent from my A0001 using XDA-Developers mobile app
Sanjoov said:
Installed 2.6.3 using TWRP 3+ by Tugapower.
Installed Google Apps from Smartisan Store.
Activated Inbuilt root.
Had problems restoring apps using Backup+
Changed and Flashed TWRP Tugapower using Flashify.
Installed Root SuperSu 2.74
Restored all apps using Backup+
Running super.
No bootloops.
Await further official updates or....
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
2.6.3 official? That has its own recovery, right? How did you get this work with TWRP? Did you edit the updater script?
Sent from my A0001 using Tapatalk
GALAXY GRAND PRIME G531F MASTER THREAD
This thread is to help you track every devlopment on SM-G531F
This device has very limited development and that too is scattered around so I am trying to make a list of working stuff
That works on this device
[emoji815] Rom
Stock
[emoji117] You can get stock rom at sammobile.com
Custom
[emoji117] No custom rom till now but devlopment on miui 8 is on
Miui8 (under devlopment ) currently not working on our dev
[emoji815] Kernel
Stock
[emoji117] Stock kernel
Custom kernel
[emoji117] Get it here
[emoji815] Recovery
Stock
[emoji117] Stock recovery
[emoji117] Odin flashable stock recovery
Custom
[emoji117] Twrp 2.8 official
[emoji117] Twrp 3.0 unofficial actually it's for g531m but works awesome on our device
[emoji117] TWRP 3.0.2
[emoji815] Root Methods
[emoji117] Pre-rooted firmware
[emoji117] SuperSu
[emoji815] Xposed framework
Use this guide
[emoji117] xposed frameaork on 531f guide
[emoji815] Mods
Custom Boot Animations
[emoji117]Pixel boot animation
[emoji117]Nougat boot animation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I missed anything please let me know
Credits
Custom Kernel @dadziokPL
Custom Recovery TWRP for 2.8
. @dadziokPL for 3.0.2
. @buenajuan300 for TWRP 3.0
Xposed Framework @rovo89
@wanna
Guide on xposed &boot animations @Owen007
Reserved
Thanks for adding my thread and thanks for creating this thread it will help all other users to get all stuff at one place I hope you will keep updating it.
I hope we will soon have a custom ROM
The guy who created custom kernel and twrp 3.0.2 is also working in omni rom but no success hope he will make it
Sent from my SM-G531F using Tapatalk
Hack House said:
The guy who created custom kernel and twrp 3.0.2 is also working in omni rom but no success hope he will make it
Sent from my SM-G531F using Tapatalk
Click to expand...
Click to collapse
Yup I hope he could make one
Owen007 said:
Yup I hope he could make one
Click to expand...
Click to collapse
I don't think so... I also have one more thing to fix in the kernel. Have you guys noticed very high battery usage? I've checked, and it seems like my phone does not go into deep sleep, and the battery just dies really quickly. I'll copy the clean source from Samsung, disable SELinux, and rebuild the kernel, maybe it will fix itself. Overall I'm taking a break for a few days, I'll try to fix the kernel next week.
dadziokPL said:
I don't think so... I also have one more thing to fix in the kernel. Have you guys noticed very high battery usage? I've checked, and it seems like my phone does not go into deep sleep, and the battery just dies really quickly. I'll copy the clean source from Samsung, disable SELinux, and rebuild the kernel, maybe it will fix itself. Overall I'm taking a break for a few days, I'll try to fix the kernel next week.
Click to expand...
Click to collapse
Yea i removed it after one day because my phone died really quickly I was surprised then I again flashed stock rom. Now my device is clean.
Hi guys, I am new do xdadevelopers. I rooted phone yesterday with a prerooted method. Came with a problem that made my phone restart after apps being updated or installed. I did factory reset and solved that problem. In this prerooted method I got APUS. If you can tell me a little more about APUS. What exactly it is? My biggest problem right now is when i try to install twrp through odin on pc and download mode on grand prime, it shows me fail and on phone shows me custom binary blocked by frp lock. As I sad, i am really new to this and i am willing to learn.
So my questions are here:
1. What is APUS? And what do i need it for?
2. Why i need twrp recovery and why i can't install it?
Thanks ahead guys, whenever you can/ if you can
You need restore to original recovery and disable frp
Enviado desde mi SM-G531F mediante Tapatalk
DzonTravolta said:
Hi guys, I am new do xdadevelopers. I rooted phone yesterday with a prerooted method. Came with a problem that made my phone restart after apps being updated or installed. I did factory reset and solved that problem. In this prerooted method I got APUS. If you can tell me a little more about APUS. What exactly it is? My biggest problem right now is when i try to install twrp through odin on pc and download mode on grand prime, it shows me fail and on phone shows me custom binary blocked by frp lock. As I sad, i am really new to this and i am willing to learn.
So my questions are here:
1. What is APUS? And what do i need it for?
2. Why i need twrp recovery and why i can't install it?
Thanks ahead guys, whenever you can/ if you can
Click to expand...
Click to collapse
Hello DZON wlecome to XDA Developers. I dont know what apus is I guess its a launcher.
Read this how to flash twrp:-
1. Frp lock is a security which dont let u flash some other unofficial frimwares and stuff.
2. You need to remove your all google accounts and then put your device in download mode and flash twrp with odin.
3. But if u again add google account again after flashing twrp ur device will get locked.
4. So theres a method to off frp lock forever. See this link:-
http://forum.xda-developers.com/and...k-enabling-t3456538/post68563832#post68563832
see my signature down this post. and tell me if u find them usefull.
Labestiajaker said:
You need restore to original recovery and disable frp
Enviado desde mi SM-G531F mediante Tapatalk
Click to expand...
Click to collapse
How to do that?
Is it easy and i can find tutorial on google?
Thanks man, for this awesome fast reply
---------- Post added at 01:14 PM ---------- Previous post was at 01:05 PM ----------
Owen007 said:
Hello DZON wlecome to XDA Developers. I dont know what apus is I guess its a launcher.
Read this how to flash twrp:-
1. Frp lock is a security which dont let u flash some other unofficial frimwares and stuff.
2. You need to remove your all google accounts and then put your device in download mode and flash twrp with odin.
3. But if u again add google account again after flashing twrp ur device will get locked.
4. So theres a method to off frp lock forever. See this link:-
http://forum.xda-developers.com/and...k-enabling-t3456538/post68563832#post68563832
see my signature down this post. and tell me if u find them usefull.
Click to expand...
Click to collapse
Wow you guys are unbelievable!!
First i need to remove google account and then go with method by number 4 you posted?
And does that mean i can't use google account after doing what you told me?
If anyone else knows, do i need APUS launcher, or is there any better out there?
Thanks man so much for replying!
DzonTravolta said:
How to do that?
Is it easy and i can find tutorial on google?
Thanks man, for this awesome fast reply
---------- Post added at 01:14 PM ---------- Previous post was at 01:05 PM ----------
Wow you guys are unbelievable!!
First i need to remove google account and then go with method by number 4 you posted?
And does that mean i can't use google account after doing what you told me?
If anyone else knows, do i need APUS launcher, or is there any better out there?
Thanks man so much for replying!
Click to expand...
Click to collapse
Yes remove google account and follow step 4. After the step 4 is completed you can add google account by the app quickshortcutmaker as described in 4th step.
Have any problem pm me if i helped u can hit thanks button
P.s remove apus launcher its of no need
---------- Post added at 12:24 PM ---------- Previous post was at 12:20 PM ----------
Go here my thread :- http://forum.xda-developers.com/grand-prime/general/tut-how-to-install-xposed-framework-t3508071
You will find all your answers and install xposed to get some cool feautres
An rom is under development sm-531f soon will get a rom
Hack House said:
Code:
This thread is to help you track every devlopment on SM-G531F
This device has very limited development and that too is scattered around so I am trying to make a list of working stuff
That works on this device
Rom
Stock
*You can get stock rom at sammobile.com
Custom
*No custom rom till now but devlopment on miui 8 is on
Miui8 (under devlopment ) currently not working on our dev
Kernel
Stock
*Stock kernel
Custom kernel
*Get it here
Recovery
Stock
*Stock recovery
*Odin flashable stock recovery
Custom
*Twrp 2.8 official
*Twrp 3.0 unofficial actually it's for g531m but works awesome on our device
*TWRP 3.0.2
Root Methods
*Pre-rooted firmware
*SuperSu
Xposed framework
Use this guide
*xposed frameaork on 531f guide
Stock kernel and recovery are extracted from rom version G531FDDU1APJ2_G531FODD1APJ2_G531FDDU1APJ2_HOME
If I missed anything please tell me
Click to expand...
Click to collapse
hey bro hackhouse make the thread look impressive will help newbie people.
Thanks for feedback
I will try in 2 day
Sent from my SM-G531F using Tapatalk
This device is spreadtrum?
Hack House said:
Thanks for feedback
I will try in 2 day
Sent from my SM-G531F using Tapatalk
Click to expand...
Click to collapse
Thread is looking sweet
Hack House said:
Thanks for feedback
I will try in 2 day
Sent from my SM-G531F using Tapatalk
Click to expand...
Click to collapse
Hey bro add pixel and nougat bootanimation i created for grand prime will be good
Anyone any updates?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is CypherOS. An extension to pure Android. CypherOS tries maintain the purity of Android while offering useful features for users. The goal is to give the highest level of performance whilst achieving Simplicity.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Get your builds from our website
get.cypheros.co
Note: Builds are updated weekly. Information pertaining to your device is displayed
Accordingly. The current build is the latest for your device. If your device is
scheduled to release on a certain day, but the new build isn't displaying, contact
your device maintainer for more information. Please know builds are updated by 12am
EST.
Become apart of the G+ community - JOIN
REMINDER
If you're having issues and want to submit a report (Logcat) please make sure you are reporting from the stock kernel, not a modified kernel. Modified kernels can break or fix, even improve things. It depends. I can't get a full clue of the issue when you're not running the original kernel.
Click to expand...
Click to collapse
Credits
Paranoid Android
LineageOS
and more..
Special Thanks
- LuK1337 (Initial berkeley tree with otapackage support and stable commits)
- Flex (Fixed the fingerprint enrollment)
XDA:DevDB Information
CypherOS, ROM for the Honor View 10
Contributors
sirhc
Source Code: https://github.com/CypherOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Stable
Created 2018-04-22
Last Updated 2018-07-18
Notice
THIS IS NOT A GSI
- This a flashable zip that must be flashed in TWRP
- GAPPS are not included and must be flashed separately
- This is for the Honor View 10 only
- This has been tested on L04 but should work fine with L09
What's working?
Camera
Video Recording
Calls/Sms
Data
Fingerprint Sensor
Audio/Video Playback
What's not working?
VoLTE
Are fingerprint gestures/navigation available?
Yes, simply disable the navigation bar in Settings > System > Buttons and you will be in fingerprint navigation mode.
You can also change the gesture triggers in Settings > System > Gestures
VoLTE supported?
No, and won't be for awhile. Huawei uses a different setup for IMS and it's closed sourced.
Can't flash on my Mate 9/10/11/X/18/55
This isn't a system image and is only meant for the Honor View 10. If you want to install a rom on your non-berkeley device
then search a forum that pertains to your device.
Why no GSI?
Ota packages are easier to manage and develop for across models. Plus, spamming a View 10 development thread with bugs on a non View 10 does not
help further development
excellent mate
will backup and give it a shot
kevp75 said:
excellent mate
will backup and give it a shot
Click to expand...
Click to collapse
o/t but kind of related as I'm anxious to give this a try myself. What partitions do you backup and have you had a successful restore yet from a nandroid backup?
I had so many problems with this phone initially - had to do a funky huawei restore twice - that I'm scared to try things I wouldn't have thought twice about on my old phone.
thecdn said:
o/t but kind of related as I'm anxious to give this a try myself. What partitions do you backup and have you had a successful restore yet from a nandroid backup?
I had so many problems with this phone initially - had to do a funky huawei restore twice - that I'm scared to try things I wouldn't have thought twice about on my old phone.
Click to expand...
Click to collapse
Yeah.. i had troubles updating mine... bricked for a day lol
i back up
kernel, ramdisk, system, vendor
restored them right after i backed them up to make sure they were viable... and has been fine
Thanks for the great God's devotion
qiqiw said:
感谢大神作品
Click to expand...
Click to collapse
English here mate
kevp75 said:
i back up
kernel, ramdisk, system, vendor
Click to expand...
Click to collapse
Thank you very much. Out of curiosity, do you not backup data because it doesn't work or you just choose not to?
thecdn said:
Thank you very much. Out of curiosity, do you not backup data because it doesn't work or you just choose not to?
Click to expand...
Click to collapse
tbh
not sure if backing up data would work. i have the modded fstab so mines not encrypted anyways... but... ive had issues restoring data on other devices, so i bought titanium waayyyyy back and have had no issues getting my stuff back with that
Does anyone tried on a L09 ? coz last time i checked, TWRP was not working on android 8.1. But without a working TWRP on 8.1 i can't flash this rom
Can someone confirm ?
Rommco05 said:
Here what I did:
1. downloaded rom
2. decrypted storage by unofficial TWRP
3. flash rom
4. stuck on Your device is booting now...
Model BKL-L09C432B141
Do I something wrong?
edit: unofficial twrp not longer work. Later I will try official
Click to expand...
Click to collapse
Did you wipe data
youtuber123 said:
Does anyone tried on a L09 ? coz last time i checked, TWRP was not working on android 8.1. But without a working TWRP on 8.1 i can't flash this rom
Can someone confirm ?
Click to expand...
Click to collapse
gotta search around mate... last i saw both the official twrp and unofficial twrp are indeed working on L09
kevp75 said:
gotta search around mate... last i saw both the official twrp and unofficial twrp are indeed working on L09
Click to expand...
Click to collapse
Precisely, I had searched and tested, but the last time I looked it didn't work for android 8.1 roms.
That's why I'm asking.
Rommco05 said:
You already flashed this rom?
---------- Post added at 14:03 ---------- Previous post was at 14:03 ----------
Unofficial dont work, will try official
Click to expand...
Click to collapse
Not yet... tho it shouldn't matter since the rom does not overwrite recovery_ramdisk
Rommco05 said:
You already flashed this rom? I make factory reset in stock recovery but didnt help
---------- Post added at 14:03 ---------- Previous post was at 14:03 ----------
Unofficial dont work, will try official
Click to expand...
Click to collapse
Ok let me know if the official works
Rommco05 said:
Can u give me some advice how flash this rom. I make factory reset after flash in stock recovery but didnt help. Official twrp works
Click to expand...
Click to collapse
You can't flash roms in stock recovery. You need to use TWRP.
Here's what I do wen I flash a rom in TWRP
#1 Nandroid Backup system, vendor, kernel, ramdisk
#2 Wipe System, Wipe Data, Wipe Cache, Wipe Dalvik
#3 Flash the Zip from External SD
#4 Wipe Cache & Dalvik again
#5 Reboot
If you are data encrypted, you will most likely boot direct into eRecovery with the notice that Data is corrupt and you need to wipe... so do it.
---------- Post added at 08:17 AM ---------- Previous post was at 08:14 AM ----------
youtuber123 said:
Ok let me know if the official works
Click to expand...
Click to collapse
Rommco05 said:
Can u give me some advice how flash this rom. I make factory reset after flash in stock recovery but didnt help. Official twrp works
Click to expand...
Click to collapse
Also note mate.. OP states "must be flashed in TWRP"
It also states that is was only tested on the L04... now, this makes it very very difficult for any "cross" development to happen when the developer has one device, and you flash on another.
http://prntscr.com/j8yvaj
I hate to say it, but if anyone flashes something that was only tested on one device, to a different device may be on their own...
This uses the same tree as the one used in the LineageOS build. The only commits besides those are my own for themes and FP navigation. So theoretically, this should work fine on L09 as Luk builds for L09 and his trees support both.
TWRP, I don't know too much regarding L09 but I use the twrp 0.7 build and everything works fine for me. You need to wipe cache, data, system before flashing this.
I just cleaned cache, data and system from twrp 0.7 and got the same issue:. I have a L09 and not a L04
I'll make another build soon
Thanks man! Do you have in your plans to have Huawei's camera built in your rom?
Sent from my BKL-L09 using Tapatalk