Hello XDA people, i just flashed the latest XZDualRecovery on my Xperia Z2 (existenz marshmallow 1.0.0) haven't updated it yet but that was what i wanted to do so i just flashed this recovery and didnt read that it is just for lollipop only so i guess i ****ed up my device and dont know a way to fix this because its just restarting over and over again its even no bootloop its just showing the SONY logo at the beginning so im asking you people if you can help me to get this problem solved, thank you in advance
and sorry for my bad english...
Pocahontas32 said:
Hello XDA people, i just flashed the latest XZDualRecovery on my Xperia Z2 (existenz marshmallow 1.0.0) haven't updated it yet but that was what i wanted to do so i just flashed this recovery and didnt read that it is just for lollipop only so i guess i ****ed up my device and dont know a way to fix this because its just restarting over and over again its even no bootloop its just showing the SONY logo at the beginning so im asking you people if you can help me to get this problem solved, thank you in advance
and sorry for my bad english...
Click to expand...
Click to collapse
Well. There are few simple ways.
First is can you enter the recovery?
If not, then just use the command "fastboot flash boot boot.img". As boot.img select some kernel with custom recovery (doesn't matter if lollipop, kitkat etc.). After that just flash some rom and optionally a proper kernel for it.
However if your bootloader is locked you may just flash an ftf with flashtool.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
Well. There are few simple ways.
First is can you enter the recovery?
If not, then just use the command "fastboot flash boot boot.img". As boot.img select some kernel with custom recovery (doesn't matter if lollipop, kitkat etc.). After that just flash some rom and optionally a proper kernel for it.
However if your bootloader is locked you may just flash an ftf with flashtool.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
well my device is in fastboot and i tried to flash cwm over fastboot and it just tells me "waiting for any device" but the LED is blue so i dont know why it just doesnt flash it
Pocahontas32 said:
well my device is in fastboot and i tried to flash cwm over fastboot and it just tells me "waiting for any device" but the LED is blue so i dont know why it just doesnt flash it
Click to expand...
Click to collapse
If you don't have unlocked bootloader, then fastboot is useless for you.
As they guide users over your post in a locked bootloader just flash stock firmware for your model device with Flashtool.
Pocahontas32 said:
well my device is in fastboot and i tried to flash cwm over fastboot and it just tells me "waiting for any device" but the LED is blue so i dont know why it just doesnt flash it
Click to expand...
Click to collapse
Then there's probably something wrong with your adb drivers.
Related
Hi there, i am new to flashing and roms but i recently tried to install CM7 on my Neo
i rooted my phone and unlocked it by fastboot ..installed CWM recovery and everything was going well untill i tried to flash CM7.2 rom and then my phone got stuck at the SE logo...and i can't even get to the recovery mode ...now my phone is useless and i need help
mohamedawad said:
Hi there, i am new to flashing and roms but i recently tried to install CM7 on my Neo
i rooted my phone and unlocked it by fastboot ..installed CWM recovery and everything was going well untill i tried to flash CM7.2 rom and then my phone got stuck at the SE logo...and i can't even get to the recovery mode ...now my phone is useless and i need help
Click to expand...
Click to collapse
did you read good and do this?
HOWTO
to flash cm7 rom you have to take 3 steps (after unpacking the 7z archive)
step 1 - copy update.zip to sdcard
step 2 - flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run fastboot flash boot boot.img (an black window will open and will stay open untill kernel is flashed)
ON PHONE - put phone in fastboot mode (power off then press lower right key and plug usb cable) and phone LED will light BLUE
step 3 - when phone is booting (first 5 seconds) press volume down key several times to enter recovery and choose apply update from sdcard
WARNING - if you used another rom (stock or custom) you have to wipe data or device will not boot
DOWNLOAD
look in my signature
please don't mirror (we want to have download conunt)
Hi
When you were installing CM7 on clockworkmod did you remeber to wipe everything? before you install the rom, on the first screen of clockworkmod you see wipe data and wipe cache. Wipe them both then go to advanced and wipe dalvic cache and battery stats, after that install CM7. So what should you do:
1. turn of phone
2. connect to pc on fastboot and flash kernel with built in recovery (Command: fastboot flash boot boot.img)
3. now disconnect phone and go to cwm and wipe everything like i said
4. install cm7
if works hit thanks ^^
btw. sony ericsson logo, seems like you didnt even flash kernel?
Since u are saying u seeing sony ericsson logo seems u didnt flash kernel properly, use flashtool in xperia neo dev section makes things way easier.
Good luck bro hope this helps !
Sent from my MT15i using XDA
i am trying to flash the kernel via fastboot but i can't and it says phone must be rooted first....before you call me a noob XD i know my phone IS rooted and i flashed the kernel earlier by using kernel manager....now i can't flash the new kernel ...what can i do now ?
Try re rooting ur device bro seems there is an error phone cant get root access something is missed up with the root mayb ! All the best !
Sent from my MT15i using XDA
mohamedawad said:
i am trying to flash the kernel via fastboot but i can't and it says phone must be rooted first....before you call me a noob XD i know my phone IS rooted and i flashed the kernel earlier by using kernel manager....now i can't flash the new kernel ...what can i do now ?
Click to expand...
Click to collapse
just flash that kernel via fastboot. don't use apps to flash kernels
fastboot flash boot nameOfKernel.img
I think you forgot to flash the custom kernel,cos if you flashed the CM kernel it should not show Sony Ericsson boot logo,it should show CM boot logo
update
I flashed .42 firmware again using flashtool and the device is now working
Now i realized that the problem was that i didn't properly unlock the bootloader...what i want now is a way to unlock it..bcz everytime i try it gives me this error
(bootloader) Unlock phone requested
FAILED (remote: oem unlock failed!)
finished. total time: 0.003s
I searched the forum and tried this thread
http://forum.xda-developers.com/showthread.php?t=1544419
but it didn't give any kind of solution, Anybody can help ?
Did u try sony's official unlock from there site?,its the easiest way to unlock bootloader i guess
Sent from my MT15i using XDA
Moursy93 said:
Did u try sony's official unlock from there site?,its the easiest way to unlock bootloader i guess
Click to expand...
Click to collapse
wtf, he is trying that
Madfysh said:
wtf, he is trying that
Click to expand...
Click to collapse
my bad, i misunderstood his post
Moursy93 said:
Did u try sony's official unlock from there site?,its the easiest way to unlock bootloader i guess
Sent from my MT15i using XDA
Click to expand...
Click to collapse
LOL, that's what i am doing in the first place, Thanks for your contribution anyway bro
Hello, I recently rooted my Sony Xperia Z2 because I wanted to install a custom ROM, but this is where it gets tricky....
so i got root access and the bootloader unlock allowed is on "yes" so that's good right?..
anyway I've been trying to get into recovery mode but it just doesn't work at all, i also tried installing CWM and TWRP and even Philz but it was a failure because there is no way to get into recovery mode so, is there a way or something I could do to enter recovery mode to install a Lollipop ROM ?
ps: sorry if this thread is already made, i didn't find anything useful
Update: I have shut off my device, held the volume up connected to my pc and the LED turned BLUE! HOWEVER, there is nothing on the screen is just BLACK.
YoungCNYC said:
Update: I have shut off my device, held the volume up connected to my pc and the LED turned BLUE! HOWEVER, there is nothing on the screen is just BLACK.
Click to expand...
Click to collapse
This is fastboot mode, not recovery.
Have you actually unlocked you bootloader? It needs to be unlocked before you flash lollipop. If it is unlocked, just download a kernel and flash it via fastboot.
fastboot flash boot boot.img
o0 Matt 0o said:
This is fastboot mode, not recovery.
Have you actually unlocked you bootloader? It needs to be unlocked before you flash lollipop. If it is unlocked, just download a kernel and flash it via fastboot.
fastboot flash boot boot.img
Click to expand...
Click to collapse
its stuck on "waiting for device"
YoungCNYC said:
its stuck on "waiting for device"
Click to expand...
Click to collapse
Have you installed the drivers? Are you on win 8? Dowload flashtool and install the drivers from the drivers folder.
o0 Matt 0o said:
Have you installed the drivers? Are you on win 8? Dowload flashtool and install the drivers from the drivers folder.
Click to expand...
Click to collapse
i dont recall installing the drivers so ill go ahead and try that,and im on win 7
ive downloaded and installed the drivers, now the phone is recognized but i get
error:cannot load 'boot.img': no error
how can i flash recovery twrp?
YoungCNYC said:
ive downloaded and installed the drivers, now the phone is recognized but i get
error:cannot load 'boot.img': no error
how can i flash recovery twrp?
Click to expand...
Click to collapse
Never seen that before. What are you typing in? Copy what you type and the response into a post.
Nowhere not confirmed that the bootloader is unlocked, but that can be unlocked. You wrote this - " /so i got root access and the bootloader unlock allowed is on "yes/". If you have locked bootloader, then don't try with fastboot flash boot boot.img. Just downloaded version of Dual recovery Installer for Pc.
Monipeev said:
Nowhere not confirmed that the bootloader is unlocked, but that can be unlocked. You wrote this - " /so i got root access and the bootloader unlock allowed is on "yes/". If you have locked bootloader, then don't try with fastboot flash boot boot.img. Just downloaded version of Dual recovery Installer for Pc.
Click to expand...
Click to collapse
the bootloader is unlocked, i just want custom recovery to flash a rom
o0 Matt 0o said:
Never seen that before. What are you typing in? Copy what you type and the response into a post.
Click to expand...
Click to collapse
C:\Users\Christian Ortiz\Downloads\ADB TOOLS>Fastboot flash boot boot.img
<waiting for device>
error: cannot load 'boot.img': No error
C:\Users\Christian Ortiz\Downloads\ADB Tools\ADB Tools>_
I just want custom recovery to flash a rom, its simple just the phone its giving me a hard time & ive had different process with the galaxy S4/S5
So you have unlocked your bootloader via sony website?
What boot image are you trying to flash?
o0 Matt 0o said:
So you have unlocked your bootloader via sony website?
What boot image are you trying to flash?
Click to expand...
Click to collapse
Yes, I have & I'm trying to flash costum recovery to flash a lollipop ROM
Hello guys. I unlocked the bootloader via adb (fastboot oem unlock) and flashed the cyanogenmod Recovery and after that i flashed Cyanogemod 13 (the official nightly).
Then I relocked the bootloader (fastboot oem lock)
Until here everything is fine. The problem is: After that I use my phone with CM13 normally, but I wanted to go back to stock, so I turn on developer options then i turned on the OEM unlocking thing, and usb debuging. And when i entered in fastboot mode to unlock the bootloader again i wrote via adb fastboot oem unlock the phone rebbot and now i am stucked on cyanogenmode recovery with the bootloader locked.
Another thing: if i flash the cyanogen 13 again the phone will allways reboot to recovery.
ateresabelo said:
Hello guys. I unlocked the bootloader via adb (fastboot oem unlock) and flashed the cyanogenmod Recovery and after that i flashed Cyanogemod 13 (the official nightly).
Then I relocked the bootloader (fastboot oem lock)
Until here everything is fine. The problem is: After that I use my phone with CM13 normally, but I wanted to go back to stock, so I turn on developer options then i turned on the OEM unlocking thing, and usb debuging. And when i entered in fastboot mode to unlock the bootloader again i wrote via adb fastboot oem unlock the phone rebbot and now i am stucked on cyanogenmode recovery with the bootloader locked.
Another thing: if i flash the cyanogen 13 again the phone will allways reboot to recovery.
Click to expand...
Click to collapse
Never lock bootloader unless you are on stock ROM (oos). Now you need to unlock bootloader.For that you need stock ROM and stock recovery. Are you able to boot to any ROM,cm 13?
@ateresabelo maybe you have to flash stock Rom. Hopefully then it will allow you to unlock bootloader. Best of luck mate.
saurabh40629 said:
Never lock bootloader unless you are on stock ROM (oos). Now you need to unlock bootloader.For that you need stock ROM and stock recovery. Are you able to boot to any ROM,cm 13?
Click to expand...
Click to collapse
Thanks for the reply.
I can flash CM 13 ROM with cyanogenmod Recovery, but when the flash finish, when I reboot, the phone boot into recovery mode, and not boot into the ROM. So it flash the ROM without errors but boot into the Recovery again.
ateresabelo said:
Thanks for the reply.
I can flash CM 13 ROM with cyanogenmod Recovery, but when the flash finish, when I reboot, the phone boot into recovery mode, and not boot into the ROM. So it flash the ROM without errors but boot into the Recovery again.
Click to expand...
Click to collapse
Flash stock ROM. Download it from oneplus website. And use TWRP recovery instead. Cwm is kind of obsolete and i m not sure if it works perfectly.
saurabh40629 said:
Flash stock ROM. Download it from oneplus website. And use TWRP recovery instead. Cwm is kind of obsolete and i m not sure if it works perfectly.
Click to expand...
Click to collapse
I cant do that. Because when I try to flash TWRP I recive the message that the bootloader is locked.
ateresabelo said:
I cant do that. Because when I try to flash TWRP I recive the message that the bootloader is locked.
Click to expand...
Click to collapse
Download zip file and flash from cwm, not from fastboot.
saurabh40629 said:
Download zip file and flash from cwm, not from fastboot.
Click to expand...
Click to collapse
The thing is the recovery that i have is not CWM is the cyanogenmod Recovery (with oem locked). I only can boot into CM 13 ROM if i go to the fastboot mode and then type: fastboot continue. If I do that I can use the phone with CM 13.
But when I reboot my phone from the ROM it come back to the cyanogen Recovery and not boot to the CM 13 ROM. And I have to repeat the process: Go to fastboot and type fastboot continue in order to boot on my ROM.
So is any way to unlock the bootloader, like fastboot oem unlock (with the cyanogenmod Recovery instaled) in order to flash the OPX stock recovery or the TWRP recovery?
ateresabelo said:
The thing is the recovery that i have is not CWM is the cyanogenmod Recovery (with oem locked). I only can boot into CM 13 ROM if i go to the fastboot mode and then type: fastboot continue. If I do that I can use the phone with CM 13.
But when I reboot my phone from the ROM it come back to the cyanogen Recovery and not boot to the CM 13 ROM. And I have to repeat the process: Go to fastboot and type fastboot continue in order to boot on my ROM.
So is any way to unlock the bootloader, like fastboot oem unlock (with the cyanogenmod Recovery instaled) in order to flash the OPX stock recovery or the TWRP recovery?
Click to expand...
Click to collapse
Ok, do one thing. Download flashify app and flash stock oxygen recovery through it. Remember this is an app. After that when you go to recovery, you should have stock oxygen recover. Flash oxygen os after that from stock recover. Try and let me know.
saurabh40629 said:
Ok, do one thing. Download flashify app and flash stock oxygen recovery through it. Remember this is an app. After that when you go to recovery, you should have stock oxygen recover. Flash oxygen os after that from stock recover. Try and let me know.
Click to expand...
Click to collapse
Thanks, mate. When I arrive at home I will try it and I will let you know.
saurabh40629 said:
Ok, do one thing. Download flashify app and flash stock oxygen recovery through it. Remember this is an app. After that when you go to recovery, you should have stock oxygen recover. Flash oxygen os after that from stock recover. Try and let me know.
Click to expand...
Click to collapse
Just another question: for that task (flash the OPX stock recovery do I need root access?) I am asking this because I do not have the SUperSu installed. So maybe I need to use the cyanogenmod Recovery to flash the SuperSU and hope it works and then use flashify, right?
ateresabelo said:
Just another question: for that task (flash the OPX stock recovery do I need root access?) I am asking this because I do not have the SUperSu installed. So maybe I need to use the cyanogenmod Recovery to flash the SuperSU and hope it works and then use flashify, right?
Click to expand...
Click to collapse
Yes, it does. You can enable inbuilt root access in developer settings in cm13.
saurabh40629 said:
Yes, it does. You can enable inbuilt root access in developer settings in cm13.
Click to expand...
Click to collapse
Thanks a lot. So, I am ready to do that. I have the stock Recovery for the OPX from OnePlus website and now I am ready to flash it via Flashify.
Just the last question, If I flash the stock recovery with the bootloader locked, does it will hardbrick or softbrick my phone? I just ask that, not because I dont trust you, because I trust, but because I read that is not a good ideia flash recoverys or roms with the bootloader locked.
Thanks again in advance, mate.
saurabh40629 said:
Yes, it does. You can enable inbuilt root access in developer settings in cm13.
Click to expand...
Click to collapse
It worked, mate! Thanks a lot. Now I have the Stock OPX Recovery and the OxygenOS. Amazing! SO I can assume that I can now securly unlock the bootloader, flash TWRP and NEVER relock the bootloader again, right? (Unless if I have the stock Recovery and the stock ROM.)
Thanks a lot, again!!!
ateresabelo said:
It worked, mate! Thanks a lot. Now I have the Stock OPX Recovery and the OxygenOS. Amazing! SO I can assume that I can now securly unlock the bootloader, flash TWRP and NEVER relock the bootloader again, right? (Unless if I have the stock Recovery and the stock ROM.)
Thanks a lot, again!!!
Click to expand...
Click to collapse
Glad u solved it. U got it, Just don't lock the bootloader again. There are some very good ROMs apart from cm13, try them. Happy flashing.
saurabh40629 said:
Glad u solved it. U got it, Just don't lock the bootloader again. There are some very good ROMs apart from cm13, try them. Happy flashing.
Click to expand...
Click to collapse
Thanks a lot. I only used CM 13 (nigtly and Paranoid 6.0.1). What do you suggest?
ateresabelo said:
Thanks a lot. I only used CM 13 (nigtly and Paranoid 6.0.1). What do you suggest?
Click to expand...
Click to collapse
Just look at ROM section and decide, Its raining ROMs for oneplus x. ROMs( like zephyr, orion, ownROM etc) compiled with UBER toolchain are smoother, so you may wanna try them to get awed.
saurabh40629 said:
Just look at ROM section and decide, Its raining ROMs for oneplus x. ROMs( like zephyr, orion, ownROM etc) compiled with UBER toolchain are smoother, so you may wanna try them to get awed.
Click to expand...
Click to collapse
I will and thanks again. :good:
Good Mornig
:crying: I installed the latest Flyme rom on my Togari but now i can´t boot in to my recovery.
But if I boot into the Rom I don´t have Problems.
I only cant Boot to the Recovery and also i don´t can boot into fastboot or flashmode.
Sry for my English but im from Germany
If i try to boot into flashmode only the led is going for 1 sec. yellow and my phone turns off.
Also if i try to boot into fastboot, my Phone vibrates 3 times and then it turns off.
If I try to boot with the NDR Utils App into the Revovery, my Phone only makes a Bootloop.
I used this Rom :FlymeOS_4.5.1.1R C6833/02
and here is the thread :http://forum.xda-developers.com/xperia-z-ultra/development/rom-flymeos4-5-1-1r-c6833-02-t3165834
ADB is installed. The Phone is also Rooted. for Recovery i Used NDR Utils.
Thanks for Help
NDR utilities....I guess you are using NUTS XZU dual recovery well mate it clearly said that whenever you flash a rom using xz dual recovery....you will lose your recovery...there was a flashasble zip which needed to be flashed after flashing rom which won't erase your recovery
Now regarding your fastboot or flashmode.... Are the latest and proper drivers install....don't care about the led flashing does the PC detect the device In flashmode? If yes just reflash stock back using androxyede flashtool and make sure you install the new bootloader next time via Emma which has a separate recovery partition in it.....regards if you need any help feel free to PM
You can flash dual recovery or download twrp manager, follow instructions and you'll be granted twrp recovery
sairaj rane said:
NDR utilities....I guess you are using NUTS XZU dual recovery well mate it clearly said that whenever you flash a rom using xz dual recovery....you will lose your recovery...there was a flashasble zip which needed to be flashed after flashing rom which won't erase your recovery
Now regarding your fastboot or flashmode.... Are the latest and proper drivers install....don't care about the led flashing does the PC detect the device In flashmode? If yes just reflash stock back using androxyede flashtool and make sure you install the new bootloader next time via Emma which has a separate recovery partition in it.....regards if you need any help feel free to PM
Click to expand...
Click to collapse
thanks
The led was the problem, now i flashed twrp again and the latest cm.
Now its working.:victory:
IDK/King said:
thanks
The led was the problem, now i flashed twrp again and the latest cm.
Now its working.:victory:
Click to expand...
Click to collapse
Dont forget to flash new bootloader MM AND N roms can't be flashed on XZ dual recovery
I try to install .img file in recovery, but after install this, my phone shutdown in software brick....
AyalaE96 said:
I try to install .img file in recovery, but after install this, my phone shutdown in software brick....
Click to expand...
Click to collapse
Don't use install img option on twrp it may not work always
Instead of that you can flash recovery using fastboot with "fastboot flash recovery (the name of recovery).img) command
raminta said:
Don't use install img option on twrp it may not work always
Instead of that you can flash recovery using fastboot with "fastboot flash recovery (the name of recovery).img) command
Click to expand...
Click to collapse
I tried, and it didnt work...
AyalaE96 said:
I tried, and it didnt work...
Click to expand...
Click to collapse
Do you have unlocked bootloader???
raminta said:
Do you have unlocked bootloader???
Click to expand...
Click to collapse
yep
raminta said:
Do you have unlocked bootloader???
Click to expand...
Click to collapse
I solved it, I first must install Repack boot with "fastboot flash boot ...img"
After install recovery with "Fastboot flash recovery ...img"
My error Because I should read this first...
Dees_Troy said:
Note that the Z2, like most other Sony devices does not have a proper bootable recovery. As such you have to install a kernel that includes a recovery with it. For a time I will try to continue to supply updated stock kernels repacked with TWRP in them. If you are running one of my kernels or have a custom ROM like OmniROM installed, you can install TWRP in the FOTAKernel partition to stay on the latest version of TWRP.
Device page on our website
Mirror 1
Mirror 2
To install a stock kernel, boot the device into fastboot mode and then from your computer: fastboot flash boot path/to/filename.img
Click to expand...
Click to collapse
However is it true? With latest updates there was bootloader update which brings (or at least should as Sony said) /recovery partition (or more gives access to it, coz partitions was probably always there).
However how it exactly works? I always thought that onee flashed update with newest bootloader will leave new bootloader and this partition forever. But I got Z2 with .291, downgraded it to 4.4.2 for Root and TA backup and than tried to flash recovery to recovery partition, but got error: FAILED (data transfer failure (Unknown error)).
Does it mean that only on latest update(s) there is possibility to use this partition?
Never tried it on my ZU before. I just started form latest 5.1.1.
EDIT: OK, so what i assumed was right - on 6.0.1 I was able to flash the recovery to it's partition.
Now the problem is with booting into it. How? With Power + Vol- it still stright to boots to OS...
EDIT2: adb reboot recovery boots to different bootloader screen (Power+Vol- gives SONY screen and adb gives SONY + XPERIA screen.
However it still boots strght to Android...
Any idea what I'm doing wrong? I have 23.5.A.1.291 + unlocked bootloader + TWRP 3.0.2-0 (official) flashed with fastboot flash recovery img.
I'm 100% sure that SONY screen (w/o XPERIA) is the right one as I have identical one on my ZU when booting into bootloader-recovery mode. But why here it don't boot TWRP, but OS?
HELPPPP
Pleaseeeee tell me how did you flash twrp 3.0? I have tried almost everything it now seems impossible for me... Pleaseee helpp me T_T ... Thankk youuu