Related
Since I haven't seen many people here mentioning it, I thought it'd be useful to talk about my experience with Brando anti glare protector for Touch HD.
Few months ago, when I stockpiled on the protectors, I ordered one, just for the testing purposes. They were cheap, so I figured why not.
Now that my previously used ultra-clear protector got badly scratched and even deformed after a situation in which my Touch HD fell face down directly onto a neck of a beer bottle (don't ask) I realized I had to change it. The screen magically survived without any trace of contact, and I was very lucky for having the protector on - without it, I'm sure the screen would've had to be replaced.
Applying the protector
So, I pulled out the anti glare protector and applied it. First of all, the application procedure was slightly easier then with ultra-clear. The anti glare protector seems to be a bit stiffer and requires only one side of the protector to be peeled off before application, whereas the ultra needs 2 protective layers removed. It could also be simply the fact that I got some practice with these things now... But it felt easier in any case.
Fit
As with other Brando protectors, this one is also a bit too short on the bottom. If you start directly at the top of the device screen, leaving absolutely no space between the protector and the screen edge, at the bottom side you'll end up about 1.2 mm too short. For me it's not a big problem, and I certainly don't notice this, since the bottom part is usually covered by hand or fingers, but people who insist on perfection may find this annoying. The cut out for the speaker seems to sit well in it's place, and also be aware that there is a U-shaped cut out for the front camera. The ultra clear covers the camera, but obviously because of the grain-effect I'll get to in a moment, this was not possible here.
Brightness
After applying it I was very happy with the overall look. The screen brightness was the same - I did not notice any reduction in this regard, so I can say that this is very good in terms of transparency.
Sharpness and visibility
As for the sharpness / visibility, I'm hesitant to even say it, but there is a small difference when compared to ultra clear, or no protector of course. But it's a small difference. The effect is sort of like a very, very fine grain pattern across the screen, but I can't stress this enough - it's really no big deal. I'm a photographer and I work with graphic editing software, so my eyes are trained to notice every damn detail. For most people, I would assume that they would hardly notice any difference. So, to cut the long story short - the sharpness stays the same, but you get a gentle grain effect which is usually noticeable only on white background.
To sort of get a feeling of what you can expect, I can recommend you open up a bitmap in Photoshop and add 1 percent uniform noise filter. This is about the same amount of grain you'll see on the screen when using this protector.
Resistance to smudging
One very cool thing I noticed is that anti glare protector also seems to be MUCH, MUCH better when it comes to smudges. With ultra clear, I would usually feel a need to wipe the phone after each conversation or a typed SMS. Basically, any contact with skin would cause a mess on the screen. With anti glare, this is still present, but to much lesser extent. I feel that this is a big advantage when compared to ultra clear protector.
Touch sensation and sensitivity
Well, first of all, it does feel slightly different under your finger. Right after applying it, the finger movement across the screen felt rather stiff. There was definitively more friction going on then with ultra clear, but after one or two days of usage, this effect seems to wear off, or you simply get used to it and don't notice it anymore. I can say I have come to actually like this. Oh, and there is no degradation of screen sensitivity that I noticed. I did not feel that I had to push the screen any harder then before, so this is another strong point.
Anti-glare feature
And finally, what would be an anti glare protector review, without comment on the anti glaring From my non scientific tests, the feature works very well. The glaring is indeed much reduced. I would say about 50-60% less, if not even more. Also, when you do get some glare, for example from the direct light above your head, it's much less obtrusive then with ultra-clear or without protector. The effect is subtle, and will not interrupt you from reading things on the device.
Conclusion
All in all, if you can accept the slight grain effect, this is a great thing for people who use Touch HD in bright light or simply feel annoyed with the fact that the default screen protector is so polished you can sometimes see more of your face on it than the screen itself.
So, by sacrificing 5% of visual quality, you can get about 50% more on the usability. I don't regret buy it at all - in fact I only regret not ordering more on my last purchase.
p.s. I have absolutely no connection with Brando, nor I will get anything out of writing this review. I also have to say I have been ordering stuff from them for a while now, and have been very satisfied with their services so far.
That's a very in depth review which I am sure many will find useful.
I have a Brando Ultra Clear and have recently been using my HD in the garden as the weather in the UK has been so hot and sunny recently. I thought it would never work outside because of the bright light but with screen brightness setting on full I could not believe how good it was. No strain on the eye at all with the sun behind or in front. Not sure if this is because of the HTC screen or the Brando Ultra Clear protector - I've not tried it without.
Sounds like Anti Glare is even better from your review but I would say that Ultra Clear is still very useable in bright light.
Hi, been looking for a proper screen protector but haven't really gotten to it yet..
After reading this I'm convinced, I'm gonna get myself one!
...just can seem to locate one in the Netherlands...all shops sell the ultra clear (with anti glare in the descriptive text), but not just an anti glare one.
Anyone?
Thanks
*ordered through shop.brando etc..*
are you going to post some images?
Psygnosis84 said:
are you going to post some images?
Click to expand...
Click to collapse
Not gonna make any promises, but being a photographer, I guess I should
great review...I hate glare! So, I'm ordering one of these Brando anti-glare screen protectors.
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hi, I haven't used any Boxwave protectors, so I can't really say, but I am interested to hear from users that tried them.
Personally, I really got used to Brando anti-glare, and I find the device much more comfortable to use in everyday situations. And I really like the fact that the smudging is MUCH less of a problem.
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
AndyCr15 said:
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
Click to expand...
Click to collapse
http://www.inkino.co.uk/zen/index.php?main_page=index&cPath=69&zenid=ebdc7d2530edpgsgpjp2v0qbb1 in Tottenham Court Road fit them for you in case you've got a shaky hand
Not sure if they will have anti glare though.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hmm, I actually prefer Boxwave's grain pattern because it gives "texture" to the screen. Yeah it does lower the screen's image quality but overall it's quite nice I reckon
I got mine today, I really like it. It has a matt finish rather than a gloss finish which I prefer the feel of.
Unfortunately it took about 8 attempts to get it on without the edges slightly overlapping and causing the long bubble along the edge and now I think I have some dust under it
Still, it's a great fit, feels great but I have yet to see how well it's anti-glare properties hold up.
Brando, not so good
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Nope, nope, nope... had none of those problems here...
I've had good luck with Brando compared to other protectors.
c6638746 said:
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Click to expand...
Click to collapse
All you need is a steamy bathroom.
Reserved.
Previous thread was closed due to not being able to to accept any more requests.
Please post reviews here instead, thanks!
Now Taking Orders! PM me for details. Only post in this thread if you can't PM yet.
Saved for video review
I got the cover today, went on the first time without airbubbles, but unfortunately I got a a hair stuck under the cover. I got it on right the second time, and I'm really loving tthe cover. Its great for reducing the finger prints and glare. It is very smooth and doesn't have the orange peel texture of a lot of other screen protectors, I wouldn't mind getting one for my Droid Charge.
I got mine last night. Brought it to work this morning and slapped it on.
All I can say is I hate air bubbles and this went on the first time without issue.
It is smooth, cut down on the glare, fingerprints less noticeable, and it looks fantastic...
I am absolutely impressed by this. I may have to find out how to get a spare.
Nice can't wait to receive mine and write up a review. Hopefully my stylus will be in at the same time so I can let you know how it works with the stylus.
Recieved mine this morning. The install went smoothly, very few air bubbles that were easy to work out. The tip for removing dirt/hair trapped under the cover was great. Cover does really reduce glare and fingerprints nicely. I like the texture of the cover, it is not as smooth as the TF glass, just right to let fingers glide without grabbing.
All in all I would buy this cover.
Thanks
Just received mine today, install was easy and air bubble was easier to get out compare to what i have used before. Pretty good cover i'd say.
Just got mine as well today, install went reasonably smooth. There are a couple imperfections, but those were my fault and not the products fault. It definitely reduces the glare, and I don't notice fingerprints at all. The camera hole lines up perfect and doesn't affect it at all. Definitely one of the better screen protectors out there. The tip for getting rid of dust worked great.
I will try and get a better picture later; camera didn't want to auto focus properly.
Thanks all for the reviews. I will be posting a BUY thread in the Marketplace section once I get a few more reviews. These will be retail units with complete packaging. So keep those reviews coming!
PS Anyone recommend a cheaper/faster shipping alternative? I'm shipping them via USPS First Class ~$1 to $2 depending on location.
PPS Looking forward to the video reviews
Just got mine. Went on as easy as any screen protector I have tried. No problem with bubbles, reduces prints and glare, also the fit is spot on, only negative comments would have to be that it's not as smooth as glass. I would recommend this product.
Got mine today. Slapped it on, luckily no hair\dust. Minor bubbles which im slowly seeing go away. Glare is minimal as well as the fingerprints. By far much better than the one i received with my case from amazon. Putting an affordable price on it should make you and lots of users happy. Id buy another if need be. Thanks
Thanks to cheinb once again for the free sceen protector your generousity is greatly appreciated.
Received my Screen protector this morning in the mail and was dissapointed to see that customs or the mailman (not sure who was to blame) had decided to fold the package in half.
Despite the crease i still managed to get it to flatten out enough to be useable so I proceeded to line up the edges and found it to be a perfect fit, nice!
The finish on the screen protector adds a matte effect to the display helping to reduce glare in a sunny/brightly lighted environment, welcomed as another added bonus no doubt. The smooth surfaced finish also seems to attract significantly less fingerprints and makes the scrolling and swiping flow better.
In summary i am more than pleased with the build quality and perfect fit of cheinb's asus transformer custom screen protector, now to see how it will stand the test of time and close encounters with my monsters i mean children.
thanks again cheinb good looking out!
I received mine at the beginning of the week, and had absolutely zero problems installing it. I've installed many screen protectors in the past, and this had to be the easiest one I've ever done. The instructions were simple, and I had barely any bubbles that were slowly dissipating.
The feel of the screen protector is great, just the right amount of slide and it really cuts down on the glare.
All in all, one of the better screen protectors I've used, in all categories (Installation, protection, glare reduction, surface feel).
The TF is uses corning gorilla glass, really no need for screen protectors, unless you plan on throwing your devices around. Check youtube for gorilla glass reviews.
Sent from my Transformer TF101 using xda premium
still waiting on mine
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
hey Fliparsenal,
You were one of the first batch. Let me know if you still haven't received it in a few days.
chienb
Good!
I got mine yesterday and also applied it yesterda.
The protector is quite thick and sturdy. There was a small paper with sintructions as well.By design it allows for less air bubbles and I have only a few minor ones on the sides because of my in experience.
It has reduced the glare and made the screen less slippery. Fairly thick and I am sure it will last for a long time. The adhesive is also pretty strong. Would have been even greater with a slight blackish tint.
In short I recommend it.
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
Same here nothing yet.
Excellent
Received mine the other day, and have had a few days to use the protector.
The following is my opinion. Screen protectors aren't for everyone, but personally I'd rather make a $20 'oops' than have to live with scratches. I don't see the harm in a protector, and in my experience they reduce fingerprints and glare like mad... so, do what you want.
Anyway, here's what I think of this protector:
Installation:
Handy set of instructions. Protector went on without any problems. I used a credit card as suggested to get rid of the air bubbles, which worked out very very well. This installation method is much much easier (and safer?) than Zagg, and similar to other adhesive-type protectors.
Fit:
The protector is cut slightly smaller than the size of the glass. My alignment was spot on, so I don't have any air bubbles around the edges, but there is probably a 1mm (or less) gap around the outside of the protector, which in my opinion is the perfect fit. The cutout for the front camera also is perfect.
Feel:
The protector offers minor friction for fingers. Initially my hands were very clean from the application process, and therefore were not leaving any finger prints. I have since used the TF for a few days, and even let a baby with greasy hands play with it, and the fingerprints/smudges were a minimum. In summary: the protector feels VERY GOOD and appears to cut down fingerprints like crazy. For me, this protector is better than just the glass, and much much better than the protector I had before (I had some 3 for $10 ebay style protector.. it was garbage). This protector is on par with Zagg protectors and their lack of fingerprints (for those who have used them).
Look:
Its hard to tell that there's even a protector on except for a few pieces of dust. Glare is reduced, colors don't seem to be affected. The protector I had before this one was much worse for letting the true colors through. Everything was faded and coarsened (dunno how to best describe that, but it looked bad). All in all, this one looks as good as no protector, with added benefit of reduced glare and minimal fingerprints.
Overall:
Most of my protector experience is with Zagg protectors; on a Nook Color, galaxy s and iPhone. I didn't want to have to fight with putting a Zagg on for a screen the size of the TF, so I have been looking for alternatives. If this protector is competitively priced then imo its one of the better ones for the TF. I once tried a skinomi for a G-tablet, and that thing was a complete waste of money.
Pending price, would get another one of these.
Thanks OP for the protector.
Keep us updated on their availability (I'll probably get another one).
Another question: would it be difficult to make one to fit a G-Tablet?
Cheers.
Ok I've finally received mine. Unfortunately the the package must have gotten folded during transit and it now has creases. I'll make do and will post a tutorial next upcoming weekend. Hopefully the crease is not permanent.
So as many of you may have noticed during your uses with the nook in either bright lighting, in the car, or straight up outside (to cold for that here), the glare on the screen can get quite bad. So i was looking online for a decent antiglare for the NT or NC and i stumbled across this:
http://www.amazon.com/gp/product/B004MC4KF8/ref=fb_lfb_prodpg_0
A cheap, 2 pack with stylus, antiglare screen protectors. Now im not going to claim its the best one on the market, but if your looking for a cheap one, then go with this. It has been working very good on my NT, and it makes the screen feel silky smooth, not to mention severely reduces the nasty grease lines from my fingers.
Also, the stylus was actually surprisingly good. I've used numerous ones (cheap ones, for sure, but still multiple) styluses and this is easily the best one I've found. Nice and solid with a reactive tip that doesn't grip the screen or seem like it will fall off.
I can second this I actually purchased the same thing like a week ago. I love my protector its real nice and the stylus is pretty good. A little too sensitive with the app drawer (it likes to open apps when trying to turn the app pages) but other than that its perfect!
Just received this today and I must concur...a quality screen protector and stylus! I purchased my wife the Caseen case also and we've been really happy with it as well.
I purchased the official B&N anti-glare screen protector for $20 (eek!). I got it mainly because my daughter somehow manages to get food and who-knows-what-else on the screen. B&N says not to use moisture when cleaning the screen, but that's the only way to get the crud off. So, I got the B&N protector.
Anyway, despite comments online about people destroying both sheets in the process of installing them, I installed mine without any problems. First I made sure the screen was completely clean with absolutely no dust on it. Then I peeled back just an inch or so of the removable film, pushed the top edge of the sheet to where the case meets the screen, then slowly peeled back more as I pushed the sheet onto the screen, by bending the sheet as I worked my way down the screen. No air bubbles. No dust. No dirt. It's perfect and it looks like it will last forever.
I've got the glareshatter screen protector, its fantastic. That metal stylus is fantastic too. Do yourself a favor and hit up your local auto parts store and pick up a microfiber cloth, keep it on hand for cleaning. Also a little white vinegar on the microfiber does the job nicely.
Sent from my BNTV250 using xda premium
Hey Guys,, i am thinking of getting the above,,, i read in the forum some of the screen protector is causing harm to the screen....
is this case with this screen protector also???
Can somebody show some light on it.
Cheers!!!!!!!!!!
I bought the Import version of the Caseen Glareshatter for under $10 on ebay. Never owned the Caseen's standard protector, so I can't compare.
This is what I like:
Easy to install - it's about 2mm narrower than the screen
The feel is about perfect
Glare is definitely reduced though you still have to compensate when it's extreme
The fingerprints are there but only vivilbe from an angle with the screen off. They don't affect the visibility with the screen on.
Thing I don't like:
Makes the screen darker which is especially noticeable on the white background. I had to increase the brightness about 10% to compensate for it.
Only had for a couple of days but I am very happy so far.
Any idea where to get those in Europe? I could only find shops in the US carrying them (on ****ingly high shipping rates).
I trusted you guys and got the Glareshatter screen protectors. They really make a huge difference. Installation is really easy, just be sure to clean the screen first.
so is this glareshatter version truly the best then?
Just alittle weary on how it effects the clarity. Since some of those amazon reviews mention it.
Citizen Toxie, I was a little worried about that, too. But honestly, it's really hard to tell there's even a screen protector installed. I haven't tried any other brands, because I've really been satisfied with the import Glareshatters.
So you haven't seen it make the screen darker then? I usually keep my screen at 50%, so I'm hoping it looks the same.
If so, I will probably just grab that one.
I had my system brightness set to 30% before installing the screen protector, and I haven't changed it since.
gotcha. thanks.
guessing you grabbed the import one off ebay then?
http://www.ebay.com/itm/caseen-Nook...?pt=US_Tablet_Accessories&hash=item4cfc1c766b
nevermind. all good now.
I actually got mine off Amazon in a packaged deal with a stylus. They're also available on Caseen's official website I think, so see where you're able to get the best deal after shipping and everything.
Only 11 bux for 2 of the Glareshatters and a stylus on amazon. Pretty sweet deal.. ordering one now!
I asked someone who had used an antiglare screen protector if he recommended it and he said no because it significantly darkened the screen.
I went into B&N because my tablet was dead in the water, would not turn on at all and had to be swapped out. I asked to get an anti-glare screen protector there and he pulled one out and said they are normally $20, but because they came with a cloth inside that apparently damaged the screen or the screen protector confused that they were giving them away... Not sure if this is true or still available if so, but just thought I'd share. Made me happy!
Interesting. Wondering if that's worth a trip.
Decided I'm just going with the B&N one, since I don't really need the anti-glare.
Has anyone came across a good privacy screen protector, or something that cuts down the viewing angle quite a bit?
My first TF300 came up with a scratch out of nowhere so i didn't want to risk it on my new device. I found an Aromrshield for the TF300 on ebay for $12 + 3 for shipping. I figured for that price i'd roll the dice. The directions were easy enough to follow and the fit is absolutely exact for the screen. The other thing I'm really liking about the cover is that its perfectly clear, between the perfect fit and crystal clear view you can hardly tell its on. I'm pretty sensitive to visual distortion and have always ended up removing screen shields from my phones because they affect the clarity of the display. My eyes are picking up zero distortion on this one. I had my doubts but after a few days all the little imperfections from the installation solution faded away. The feel is natural and slightly soft. I was worried about it feeling tacky but its actually pretty comfortable.
My only gripes are 1) that even though i was meticulous about cleaning the screen before installing there must have been an airborne spec of lent that came flying by just as i was applying. Not the shields fault but still kinda annoying and 2) It may just be in my head but it feels like there may be a slight delay in my touch sensor after the install. I'm not sure if there is a setting somewhere to adjust the sensitivity but I'm open for any suggestions.
Hope this was helpful.
Funny enough, i just bought the same exact screen protector and applied it and had 0 issues installing the screen protector today. I also experienced the slight delay but what i did was put the tablet upside down on a flat surface and out a slightly heavy book on top (just heavy enough to press it down towards the flat surface, not too heavy to break it though). After a good two hours it dried up well and screen protector seated well on screen and the delay was gone.
Glad to know i wasn't imagining it. It actually seems to have improved after another day to ALMOST unnoticeable. Wish i had known the book trick, ill try next round
even better than the book method is to place it in the sun for an hour or two once a day for the first 2 days. i also have the armorshield and thats how i do it. its exactly like tinting car windows. the sun drys the solution and smooths micro ripples that create the most distortion.
I have one of these on the way....Thanks for the info.
I hated it. I actually had two and they both came scuffed up. Without me ever touching them. Install was fine but they really scratch easily. Got the acase and its sooo much better. Also the armorshield doesn't work with the dock.
Hope to make this thread as a collection of reviews and Q&A for various screen protectors. Noticed several reviews for some before the device was even released. Hopefully this thread helps others and a way for you to share your experiences.
OMOTON 4-pack
https://www.amazon.com/gp/product/B07NXZP7PG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Pros:
Covers the whole display (left to right)
No halo or rainbow effect
Leaves enough gap for a case
CHEAP (includes 4)
Cons:
Peeling the dust remove sticker was a pain.
Doesn't cover class between camera and earpiece
Other thoughts:
the glass is quite thin. Less than .33mm which is the norm. Probably will make it not so durable when drops and possibly easier to crack. But nice as it doesnt feel sharp or large on the display
This glass is a precise fit, so be careful on installation. Good thing if you mess up, there are additional ones. .5mm left/right or up/down probably will cause a halo affect for that edge
The results:
https://youtu.be/Zg1I4-MNCXk?t=125
Thanks for getting this started, tlxxxsracer! I'm going to mimic your format to the best of my ability. I'm going to include a Comments line as I don't have images or videos to link to.
Yocktec Screen Protector
https://smile.amazon.com/gp/product/B07QTZ9XPP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Comments: I gave this a 3 star rating. It's acceptable as a "until I get a better one" protector but not one I'd consider for long term.
Pro's:
Feels like decent quality glass for the price (strength, clarity, etc.)
Simple installation
Well gapped for a case
Con's:
Bad edge lifting/poor contact
Not particularly cheap given it's just one in the box
Somewhat difficult to line up given how the glass it cut for the front camera/speaker.
UniqueMe Screen Protector (3 Pack)
https://smile.amazon.com/gp/product/B07QKCFS9N/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
Comments: I opened this and immediately filed for a return. I laid one of the 3 pack onto my screen and it was too large to work with most cases, and part of the edge was going to go over the slight curve on the edge of the glass. Not worth even trying.
Pro's:
N/A, didn't even try
Con's:
Too large, will almost certainly lift off at the edges
L K Screen Protector (3 Pack)
https://smile.amazon.com/gp/product/B07NM4MRFQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Comments: What's currently on my phone. First to install had two large air bubbles because I just kind of threw it on there as I'm used to doing with most tempered glass protectors, second I went slower and it's good. There is some slight lifting on the edge in a couple of spots, and small air bubbles in the regions that the protector covers but aren't part of the actual visible screen. I'm going to stick with this until some of the bigger name brands start releasing stuff, namely second versions as the first go is rarely great, and keep the third of the pack as a backup.
Pro's:
Cheap
Quality is good. Feels strong, clarity is nice, etc.
Good coverage of screen while still allowing enough of a gap for cases to fit.
Con's:
Installation isn't as easy as I'm used to. I don't think it's a "designed to be installed how we show" you kind of thing, just a bit finicky. (Note: Not actually difficult, just go slow and follow the video they link you to in the box)
Related to above, I feel like their instructions will inevitably waste at least one protector for most users as there will be dust and/or air bubbles collected this way. You're not likely going to get it perfect on your first go. (Note: Which is why a lot of people will read this and think, "well that's why they include 3, dummy" which is a fair point, but I wanted to bring it up)
Very slight edge lift
Glass it cut so between camera and speaker there is a large exposed area (Note: doesn't bother me personally, but I know some people don't like that)
Supershieldz 3 Pack
https://smile.amazon.com/gp/product/B07Q1KCT3M/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
Comments: Didn't install. Looks very similar to the L K tempered glass in size, but based on Caebron's comments below I figure it's not removing the L K I have on to try.
Space held for Supershieldz commentary
I've got a 3 Pack of these coming in the mail tomorrow. I know a lot of people like Supershieldz but I haven't liked a single one I've gotten. I got them mostly to see if I just got bad ones in the past or if everyone's just crazy. Unlikely to install it given that the L K's nice, but I'll comment on them.
tlxxxsracer said:
Hope to make this thread as a collection of reviews and Q&A for various screen protectors. Noticed several reviews for some before the device was even released. Hopefully this thread helps others and a way for you to share your experiences.
OMOTON 4-pack
https://www.amazon.com/gp/product/B07NXZP7PG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Pros:
Covers the whole display (left to right)
No halo or rainbow effect
Leaves enough gap for a case
CHEAP (includes 4)
Cons:
Peeling the dust remove sticker was a pain.
Doesn't cover class between camera and earpiece
Other thoughts:
the glass is quite thin. Less than .33mm which is the norm. Probably will make it not so durable when drops and possibly easier to crack. But nice as it doesnt feel sharp or large on the display
This glass is a precise fit, so be careful on installation. Good thing if you mess up, there are additional ones. .5mm left/right or up/down probably will cause a halo affect for that edge
The results:
https://youtu.be/Zg1I4-MNCXk?t=125
Click to expand...
Click to collapse
I also recommend the Omoton 4 pack here:
- https://smile.amazon.com/gp/product/B07NXZP7PG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Never bought this brand before but it worked perfectly on the first one. The 3a XL's display seems to be much flatter than the 2xl and 3xl which were a nightmare with putting on glass screen protectors. So happy to not have one with a black border around it again!! :fingers-crossed::fingers-crossed::good::good:
jppowers said:
Space held for Supershieldz commentary
I've got a 3 Pack of these coming in the mail tomorrow. I know a lot of people like Supershieldz but I haven't liked a single one I've gotten. I got them mostly to see if I just got bad ones in the past or if everyone's just crazy. Unlikely to install it given that the L K's nice, but I'll comment on them.
Click to expand...
Click to collapse
I just installed these and will be returning them to Amazon for a refund. The pack includes two shield, and while I was able to work out any trapped airbubbles by pushing them towards the edge of the screen, and any remaining small bubbles disappeared over night, they always leave an airbubble at one or more of the edges. It looks as if you could slide a fingernail underneath - which you can't so it's just this long elongated airbubble that makes it look as if it isn't sticking at the edge of the screen.
Ordered myself a Zagg this time - I will report back on how it works.
I also used the Omotion 4 pack,,,it covers about the same as most and fingerprints are not as noticeable as they are on some others.
3 pack I picked up. super smooth bonded pretty well. Thick so should be decent protection. though it barely covers left and right of actual screen area. not sure how much wider it could go because of the curved edges of display.
amazon.com/gp/aw/d/B07PVQ2LYB
I got the LK as an interim. They are certainly not bad, but I'd like something with a more complete coverage and also less sharp and thick edges. For my OnePlus 6 I had protectors from ******* that were decent...but not perfect either. I hope we'll get good one for the Pixel soon...
Also bought a Zagg. The guy at Best buy installed incorrectly. I ordered a replacement since it has a lifetime warranty. Will report back once I get the replacement installed properly.
Super surprised how well they installed, yes they have the black lining all around, full adhesive. No issues installing. Perfect alignment without a tray ( no screen leak on either sides). Good price and no loss of screen sensitivity.
Definitely recommended
Case friendly too
TekRoot 4 pack from ebay
Pros: perfect cut, resist smudges well, easy to apply, full glue, work well with a case, dirt cheap.
Cons; Halo around the border due to glue, maybe not enough of it, or bad quality.. other than that, for $2.25 a piece in package of 4 with shipping included, I can live with the borders not completely adhering to the screen.
I was happy with the CASEVASN screen protectors. Not sure why it's reviewed so poorly.
https://www.amazon.com/gp/product/B07R4HC87D/
I don't like the notch on the OMOTON and prefer the cutouts. It has basically zero room for error, but I eventually got it lined up perfectly with the sticky tab hinges, and it has plenty of space on the sides for a case. No bubbles or distortion.
Got my replacement Zagg, the screen feels really nice and there are NO fingerprints at all. But there's no room for error on the install and the thing that's meant to help line it up sucks, way too easy for the protector to get underneath it. Because of the huge gaps on the sides, it's almost impossible to install properly. I'd stick with a full adhesive black boarder protector, definitely not worth $40.
Edit: after just a few minutes of use, the phone is covered with fingerprints. Again, would not recommend.
---------- Post added at 11:55 PM ---------- Previous post was at 11:23 PM ----------
jsanta11 said:
Super surprised how well they installed, yes they have the black lining all around, full adhesive. No issues installing. Perfect alignment without a tray ( no screen leak on either sides). Good price and no loss of screen sensitivity.
Definitely recommended
Case friendly too
Click to expand...
Click to collapse
Looks like a ton of fake reviews on Amazon, doesn't give me the warm fuzzies. Have any pictures of it installed? I don't understand how it could have black boarder and be case friendly. I'm looking for something not case friendly, doesn't seem to be many options
xxBrun0xx said:
Got my replacement Zagg, the screen feels really nice and there are NO fingerprints at all. But there's no room for error on the install and the thing that's meant to help line it up sucks, way too easy for the protector to get underneath it. Because of the huge gaps on the sides, it's almost impossible to install properly. I'd stick with a full adhesive black boarder protector, definitely not worth $40.
Edit: after just a few minutes of use, the phone is covered with fingerprints. Again, would not recommend.
---------- Post added at 11:55 PM ---------- Previous post was at 11:23 PM ----------
Looks like a ton of fake reviews on Amazon, doesn't give me the warm fuzzies. Have any pictures of it installed? I don't understand how it could have black boarder and be case friendly. I'm looking for something not case friendly, doesn't seem to be many options
Click to expand...
Click to collapse
Am with you on that, I just purchase and test, I don't trust most Amazon reviews cause like you mentioned plenty of fakeness, but yes it has the black borders and case friendly, once am home I will upload pics. My biggest surprise is the no screen leak on the sides, **** they did a good job with the size..
Just received my omoton 4 pack. It doesn't cover the whole screen as the OP reviewed. Must be a new batch as it was backordered for a few days.
Here are the pictures of the screen protector installed
Black border
Full adhesive
Perfect alignment
No screen leak on the sides
jsanta11 said:
Here are the pictures of the screen protector installed
Black border
Full adhesive
Perfect alignment
No screen leak on the sides
Click to expand...
Click to collapse
Just ordered, looks great. Thanks for sharing!
Update: just received. Much easier to install than the Zagg due to the edges getting much closer to the edges of the phone. The cutouts are so precise you can line the whole thing up based on them. It might cut off a few pixels on the sides, but overall I'm very impressed. Fingerprint resistance seems to be MUCH better than the Zagg. Don't waste $40, buy this!
Update 2: have noticed this screen protector actually hurts screen quality pretty noticeably. Not sure why, but in some apps (especially apps with lots of white), it's VERY annoying
I also recommend the pulen. fit is perfect and I don't notice any issues with transparency or responsiveness.
I picked a 3-pack of LK, non-bordered, up. Took a little more time than I usually do lining everything up with the included guide stickers. Most other phones the cutouts are precise enough for me to eyeball, but since this one just has a huge cutout at the top for the camera all the way to the speaker, not so easy to do. Went on perfectly and so far haven't had any issues with the edges of the glass, and I don't have any blue discoloring at the edge. Protector is *just* the right size for the screen, so thinking the extra time taken to line things up served me well.
Can't take pictures because the only other device I have at the moment is a Huawei Mediapad M5 running PHH-treble and the camera doesn't work on it for whatever reason.
Link - https://smile.amazon.com/gp/product/B07NM4MRFQ/ref=ppx_yo_dt_b_asin_title_o04_s02?ie=UTF8&psc=1
tldr; these work well, take your time
https://www.amazon.com/gp/product/B07Q29VVX7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I bought those and it applied with no halo and bubbles, and I am very happy with my purchase
comes with 3 and they have a lifetime warranty
luigi90210 said:
https://www.amazon.com/gp/product/B07Q29VVX7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I bought those and it applied with no halo and bubbles, and I am very happy with my purchase
comes with 3 and they have a lifetime warranty
Click to expand...
Click to collapse
Any pictures?