Hi,
I have a car navigation unit which uses Wince 6.0, the software of this unit uses a file called "Backcar.mrf" as a boot logo.
Any chance i can edit this file to customize the boot logo?
Related
I have a new TyTn now, (lost old one), I changed the boot screen too a CIA one i found.
I cant remember how i did it...
I have search put can only find THIS THREAD but that is for a different
model.
Can some one point me to a thread that allows me to change the TyTn boot screen???
Please.
Depends on which boot screen you want to change. There are three of them. First one when you switch on , second when it initiates the gsm and third is windows boot screen. First two you need to create and flash to your device the third is simply called welcomehead.96.png and resides in the windows directory overwrite that file with one of your own thats 240x320 and it will show on startup
is this the image you are referring to
http://forum.xda-developers.com/showpost.php?p=3078867&postcount=14
If thats what you want to have on your hermes
unzip the first attachment then run the ruu_wrapper copy the welcomehead.96 file over to the windows directory if you want to change the windows mobile loading screen too.
If you fancy creating your own use the splashscreenmaker attached, although its for the artemise it works fine on the hermes and wizard too, not sure about other devices. Just make sure the images are 240x320 and no more than 256 colours(well thats what i have found works)
Oh before anyone asks , as i am sure they will, this will not wipe your phone all it does is upgrade the boot screens
Thanks very much
if i had known that the artemise worked i would of used that.....
no problem steve, was that the screen you wanted
sure was buddy
thanks again
I was looking through the windows file on the touch dual and came across this cab file does anybody know what it does etc
DL_HTC_p5500_OUK.v1.0.2cab
Update :- I done a hard reset on my phone and noticed that the above cab file installs at the start with all the Orange settings and Orange home screen followed by the windows mobile splash.
So it looks like if i can delete this file it will get rid of the Orange start up and shut down screens aswell plus the settings.
Hi,
I've been trying to locate the "boot photo" on an Amlogic S912 TV box that I have in order to change it. It is the first image that you see when you power the unit on, followed by the boot video which I have already changed and is located in the "etc" folder of the unit. I cannot find the location of the initial photo though. If anyone can tell me what folder it is located in I would certainly appreciate it! I believe it is either in bmp format or png format. The unit is running android 6 and these are the folders that are in the unit. (If this question is in the wrong section I apologize in advance!)
Thanks for any help anyone can offer.
It's not gonna be there. That image is stored in one of 2 places in every device I have had. It was either on the boot partition or bundled with the kernel. Either way you would have to flash the device to change it.
I just discovered that it is in the "logo.partition" which shows up in temp/ level 1 with the Amlogic Customization Tool, but I'd like to find out how to modify that with my own photo and then repack the firmware. Any ideas?
fxbill said:
I just discovered that it is in the "logo.partition" which shows up in temp/ level 1 with the Amlogic Customization Tool, but I'd like to find out how to modify that with my own photo and then repack the firmware. Any ideas?
Click to expand...
Click to collapse
You would need to extract that partition and find the file that it is placing in temp. Change the file and refresh the partition. Mind you this is dangerous and doesn't always work. But as long as you ha e an unlocked bootloader you should be able to recover.
The "logo.partition" is a single file in the level 1 temp file directory. It is actually a single file type, but I don't know how to disassemble the file or what program would open it. I can get a hex editor to open it, but that doesn't help me much since it is a 6 megabyte file and the hex, of course, is unreadable...at least to me. There are about 20 files in the level one temp folder of which this is just one. The program works just fine with Amlogic devices that are running Android 5 and below and does almost everything with Android 6, but this is one of the things that it won't do in Android 6 and the Customization program has not been updated for a couple of years. I'm hope that eventually it will be but at this point I need another way or program that will allow me to do it!
Found it..... It's in the Level 2 folder. Easy to put into the firmware once you know where it is!
Hey guys,
I have a strange issue when adjusting my bootanimation.zip
the board im using is vim3l running android 9.0 and when i change my bootanimation.zip i get Process System Isn’t Responding error once android is booted and it makes my wallpaper black plus kicks me out of apps every 1minutes.
my boot logo is showing up while booting but the issue shows up once android is booted.
the only thing i adjusted was bootanimation.zip, is there any other file/folder that i need to adjust when modifying bootanimation.zip ?
* by restoring the original bootanimation.zip problem goes away and android works normally so is there another file that needs to be adjusted for the new bootanimation.zip’s file size or something related to it ?
Hi Atika-Plex
I'm currently encountering the same issue (on the same board). Have you find a solution ?
Personnaly, I tried several things (reducing the resolution, removing sequences, etc..) without succcess...
Please let me know if you find something.
Hello,
editing this file to make microphone louder leads to that the device is stuck at Lineageos Logo animation.
How to edit this file without running into this issue?
Thank you all for your input.