So, I've had this problem before, and I know that I managed to get my pc recognise that I plugged in my phone, and updated it with the LG Support Tool but this time nothing seems to be working. If anyone could give me some advice on this problem, I'd be really happy, as I'd really need my phone right now. Thank you in advance.
Download last Europe Open KDZ for your phone from here. Then try start your phone in emergency/download mode and use LG Flash Tool with downloaded KDZ.
Conder000 said:
Download last Europe Open KDZ for your phone from here. Then try start your phone in emergency/download mode and use LG Flash Tool with downloaded KDZ.
Click to expand...
Click to collapse
That is the problem emergency/download mode doesn't work either. It could be that I'm doing something wrong, but all I get is the bootscreen.
Try this steps to emergency mode:
JerryGoyal said:
2. now enter into "download/emergency mode" of your phone... but how??
(i) remove battery then insert battery
(ii) press and hold both vol+ and vol- buttons and connect to computer via data cable. you will see LG logo and '>download mode' on bottom of mobile screen.you will also hear a 'connecting sound' from PC that indicates that your phone is now connected.
Click to expand...
Click to collapse
If it'll work, continue with LG Flash Tool.
Conder000 said:
Try this steps to emergency mode:
If it'll work, continue with LG Flash Tool.
Click to expand...
Click to collapse
Unfortunately, the software updater always "stops due to an unknown error". If you have a solution for that, I'd be more than happy to read it.
delijanos said:
Unfortunately, the software updater always "stops due to an unknown error". If you have a solution for that, I'd be more than happy to read it.
Click to expand...
Click to collapse
But did you get phone into emergency/download mode?
Conder000 said:
But did you get phone into emergency/download mode?
Click to expand...
Click to collapse
Yes I did. It said download mode on the bottom.
Then make sure you have installed LG Mobile Driver, if not, download and install it from LG site. Also make sure you have downloaded correct KDZ for your phone and have copied it to "LG Flash Tool 2014" folder and use CSE Flash.
Conder000 said:
Then make sure you have installed LG Mobile Driver, if not, download and install it from LG site. Also make sure you have downloaded correct KDZ for your phone and have copied it to "LG Flash Tool 2014" folder and use CSE Flash.
Click to expand...
Click to collapse
Sorry for the dumb question, but where can I find the model nuber?
Hm, what model number?
1 - Download last Open EU KDZ for LG L5 II - V10P
2 - Install LG Mobile Driver from here
3 - Put your phone to download/emergency mode
4 - Flash KDZ with LG Flash tool using CSE Flash by this tutorial
Conder000 said:
Hm, what model number?
1 - Download last Open EU KDZ for LG L5 II - V10P
2 - Install LG Mobile Driver from here
3 - Put your phone to download/emergency mode
4 - Flash KDZ with LG Flash tool using CSE Flash by this tutorial
Click to expand...
Click to collapse
Well, I was using an earlier KDZ, maybe that's what was causing the problem. I'll try using this one.
delijanos said:
Well, I was using an earlier KDZ, maybe that's what was causing the problem. I'll try using this one.
Click to expand...
Click to collapse
Actually, no, I was using this same KDZ, and no still doesn't work. I have no idea anymore.
delijanos said:
Actually, no, I was using this same KDZ, and no still doesn't work. I have no idea anymore.
Click to expand...
Click to collapse
It either crashes completely, or says that some error occoured. I'm pretty sure I won't be able to use this phone again.
Related
I don't know why I can't unclock&root it.
When I root it the List of Attached Devices is
"1024000600000001091472600D01F01A"
and I can"t boot to LG Mode
I'm using Vietnam V20a Rom,it's a new rom.:crying:
Raymond Man said:
I don't know why I can't unclock&root it.
When I root it the List of Attached Devices is
"1024000600000001091472600D01F01A"
and I can"t boot to LG Mode
I'm using Vietnam V20a Rom,it's a new rom.:crying:
Click to expand...
Click to collapse
Help Me Please!
My phone CAN'T boot up!
Not happen when i press Power button
My computer cant find device (OMAP44...) when i connect with USB cab
I Can't Install driver for it
My phone is realy died
To use OMAP driver (with a bricked phone), you must remove your battery then plug your phone (without battery) to your computer : you should see the OMAP device appear and disappear in a loop. Be fast and install the driver while it's here.
See this thread for more details :
http://forum.xda-developers.com/showthread.php?t=2119090
OperationNT said:
To use OMAP driver (with a bricked phone), you must remove your battery then plug your phone (without battery) to your computer : you should see the OMAP device appear and disappear in a loop. Be fast and install the driver while it's here.
See this thread for more details :
http://forum.xda-developers.com/showthread.php?t=2119090
Click to expand...
Click to collapse
When I plug my phone (without battery)
Only the sound (connect and disconnect) without OMAP device
Strange, if Windows make the connection sound, then, it should appear (and desappear, and reappear...). Maybe you should try on another Windows installation (on another computer).
Apparently, if you flash official LG firmware with a locked bootloader you won't be able to brick your phone. So there will be some way to recover your phone. Can you boot into SW Upgrade mode?
riaanvictor said:
Apparently, if you flash official LG firmware with a locked bootloader you won't be able to brick your phone. So there will be some way to recover your phone. Can you boot into SW Upgrade mode?
Click to expand...
Click to collapse
I can boot into SW mode,but my phone SWmode can't use KDZ_FW_UPD_EN,If I want to change the rom i should boot to os and set the LG Software mode to change my rom
Have you tried the complete offline flashing process from the beginning to unbrick your phone? If the computer still recognises your phone in SW Upgrade mode, you will be able to unbrick it
If you were on JB before bricking your phone (and obviously, you were : "I'm using Vietnam V20a Rom"), the offline KDZ flash method doesn't work, you must apply the online KDZ flash method.
See this post for more details :
http://forum.xda-developers.com/showpost.php?p=40423549&postcount=2
OperationNT said:
If you were on JB before bricking your phone (and obviously, you were : "I'm using Vietnam V20a Rom"), the offline KDZ flash method doesn't work, you must apply the online KDZ flash method.
See this post for more details :
http://forum.xda-developers.com/showpost.php?p=40423549&postcount=2
Click to expand...
Click to collapse
ok,now I want to root my phone,my phone is not brick now.Now I have try many method,but is still doesn't work
ok, I used pimp my rom and well one little setting in the GPU area caused it to blackscreen.. so I decided to just clear the phone hard reset.. but no luck.
so now im stuck, LG comes up and SW does.. but I can not get the PC to clear the phone it keeps saying usb disconnected please connect.., I was using the Metro PCS rom.. 10D I believe, but anyways anyone that can step me in the right direction would have my gratitude.. ive tried the lelus method.. and just not working right.. maybe its the drivers.. but I made sure all of them are installed..
Cobra11Murderer said:
ok, I used pimp my rom and well one little setting in the GPU area caused it to blackscreen.. so I decided to just clear the phone hard reset.. but no luck.
so now im stuck, LG comes up and SW does.. but I can not get the PC to clear the phone it keeps saying usb disconnected please connect.., I was using the Metro PCS rom.. 10D I believe, but anyways anyone that can step me in the right direction would have my gratitude.. ive tried the lelus method.. and just not working right.. maybe its the drivers.. but I made sure all of them are installed..
Click to expand...
Click to collapse
Leave your phone on while performing the offline flash, don't put it in s/w mode first. Your phone will go into s/w upgrade mode on it's own. Oh and use my modified/hex edited 11th bin
kuma82 said:
Leave your phone on while performing the offline flash, don't put it in s/w mode first. Your phone will go into s/w upgrade mode on it's own. Oh and use my modified/hex edited 11th bin
Click to expand...
Click to collapse
no go, i got a video ill put up in a bit, if i unplug it in SW mode and plug it back in i get close, but then when it starts flashing the program crashes...
I can not get it to flash while its on regular.. it keeps saying check usb, the phone its self starts up then goes to LG then a blank screen no metro or tmobile.., there is no feed back when you press the screen either, if you try to hard reset it only restarts the phone..
Cobra11Murderer said:
no go, i got a video ill put up in a bit, if i unplug it in SW mode and plug it back in i get close, but then when it starts flashing the program crashes...
I can not get it to flash while its on regular.. it keeps saying check usb, the phone its self starts up then goes to LG then a blank screen no metro or tmobile.., there is no feed back when you press the screen either, if you try to hard reset it only restarts the phone..
Click to expand...
Click to collapse
have you check if the kdz is named properly (all caps) eg. V10G_00.kdz
if it's like this v10G_00.kz it will not work.
kuma82 said:
have you check if the kdz is named properly (all caps) eg. V10G_00.kdz
if it's like this v10G_00.kz it will not work.
Click to expand...
Click to collapse
yup all caps, hmm, this is tricky
It might be corrupted try downloading it again. which version is it? I might have it and if I do i'll give you the checksum fof it.
kuma82 said:
It might be corrupted try downloading it again. which version is it? I might have it and if I do i'll give you the checksum fof it.
Click to expand...
Click to collapse
I have the same problem, I have installed a wrong kdz and I try to install another one now but it returns me an error: usb and cellphone are not connected, or something like that, at 15% of instalation.
And my phone is in s/w mode with all drivers installed.
Soulwisher said:
I have the same problem, I have installed a wrong kdz and I try to install another one now but it returns me an error: usb and cellphone are not connected, or something like that, at 15% of instalation.
And my phone is in s/w mode with all drivers installed.
Click to expand...
Click to collapse
Plesae left your phone turn on and put it in LG software mode. Then in R&D Flash tool select DIAG mode instead of EMERGENCY. You phone should boot to S/W update mode automatically.
artit said:
Plesae left your phone turn on and put it in LG software mode. Then in R&D Flash tool select DIAG mode instead of EMERGENCY. You phone should boot to S/W update mode automatically.
Click to expand...
Click to collapse
I cannot start my phone! Because I have installed a wrong kdz.
My phone does not boot, I can only enter the S/W Mode.
Soulwisher said:
I cannot start my phone! Because I have installed a wrong kdz.
My phone does not boot, I can only enter the S/W Mode.
Click to expand...
Click to collapse
OK. Two options to solve this problem.
1. You can use LG Mobile support tool to recover your phone. Load it from LG website select recover phone from menu.
or
2. Flash ICS u boot & x-loader via fastboot. Please refer to to fastboot tool at http://forum.xda-developers.com/showthread.php?t=2292828 after that your computer should reconize your phone in S/W update mode and you can flash kdz.
artit said:
OK. Two options to solve this problem.
1. You can use LG Mobile support tool to recover your phone. Load it from LG website select recover phone from menu.
or
2. Flash ICS u boot & x-loader via fastboot. Please refer to to fastboot tool at http://forum.xda-developers.com/showthread.php?t=2292828 after that your computer should reconize your phone in S/W update mode and you can flash kdz.
Click to expand...
Click to collapse
Thank you!
sadly still doing the same thing... i must be missing something.., I was able to get it show fast boot.. but what do you do after? try flashing kdz using the tool? im still getting the not connected
Cobra11Murderer said:
sadly still doing the same thing... i must be missing something.., I was able to get it show fast boot.. but what do you do after? try flashing kdz using the tool? im still getting the not connected
Click to expand...
Click to collapse
Did you flash ICS u-boot & x-loader?
artit said:
Did you flash ICS u-boot & x-loader?
Click to expand...
Click to collapse
I flashed the jb one, do i need to flash ICS one and then flash a ics kdz?
Cobra11Murderer said:
I flashed the jb one, do i need to flash ICS one and then flash a ics kdz?
Click to expand...
Click to collapse
I mean in fastboot script by Lelus, there're option to flash ICS u-boot & x-loader. Did you flash it on your phone? Because on JB KDZ flash tool cannot detect our phone. It work fine if our phone have ICS u-boot / x-loader.
artit said:
I mean in fastboot script by Lelus, there're option to flash ICS u-boot & x-loader. Did you flash it on your phone? Because on JB KDZ flash tool cannot detect our phone. It work fine if our phone have ICS u-boot / x-loader.
Click to expand...
Click to collapse
gotcha, ok I flashed the JB u-boot & x-loader lol, no wonder.., ill try in a bit and flash the ICS u-boot & x-loader and see how that goes.. that's prob where I messed up lol
artit said:
I mean in fastboot script by Lelus, there're option to flash ICS u-boot & x-loader. Did you flash it on your phone? Because on JB KDZ flash tool cannot detect our phone. It work fine if our phone have ICS u-boot / x-loader.
Click to expand...
Click to collapse
thats what i did wrong lol, thankyou so much!, it works again!!
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80120c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
raptorddd said:
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Edit: nvm I read what nuke download mode is (when no recovery and can't boot). I will try it now and see if it helps...
brickedvice said:
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Click to expand...
Click to collapse
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
raptorddd said:
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
Click to expand...
Click to collapse
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
brickedvice said:
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
Click to expand...
Click to collapse
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
raptorddd said:
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
Click to expand...
Click to collapse
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
brickedvice said:
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
raptorddd said:
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
Click to expand...
Click to collapse
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
brickedvice said:
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
Click to expand...
Click to collapse
i do not know either.. shortening the mother board is to enter download mode..
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
This thread here : http://forum.xda-developers.com/showthread.php?t=2449670 might help you installing twrp via adb
tried to flash my H901 but failed.
I cannot recover it in any way.
When it turns on it loops on the LG logo and a message: boot verification fail!
On Hard Reset it keeps looping on the same screen
On LG Bridge there is a message: Cannot check internal storage on your phone
On LG Flash Tool with H90120e_00_0316.kdz: error connecting to server
On LG UP with TotbypassFRPlgh901.tot: Antirollback version is smaller than device version
On fastboot flashing stock boot.img: writing 'boot'... FAILED (remote: unknown command)
I don't know what else to do, please help!!!
rubecker said:
tried to flash my H901 but failed.
I cannot recover it in any way.
When it turns on it loops on the LG logo and a message: boot verification fail!
On Hard Reset it keeps looping on the same screen
On LG Bridge there is a message: Cannot check internal storage on your phone
On LG Flash Tool with H90120e_00_0316.kdz: error connecting to server
On LG UP with TotbypassFRPlgh901.tot: Antirollback version is smaller than device version
On fastboot flashing stock boot.img: writing 'boot'... FAILED (remote: unknown command)
I don't know what else to do, please help!!!
Click to expand...
Click to collapse
I recently did this today and I used the kdz method. Good luck
http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
sensimila said:
I recently did this today and I used the kdz method. Good luck
http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
Click to expand...
Click to collapse
I tried using LG Flash Tool with H90120e_00_0316.kdz... it gave the connecting to server error. I had read that this is normal, that I should wait... I waited twice, overnight, and nothing happened.
Did you have success? if so, which version of Flash Tool did you use, with which specific kdz file? and what is your phone version?
Thank you for your input, I will try again using the KDZ I have.
This happened to me and I was able to unbrick. You have to get into download mode by connecting your phone to your computer and just hold the volume up button before it loops again. Then I was able to re-flash the kmz in download mode with LGUP.
What happened is I forgot to fully unlock the bootloader again after flashing the kmz. You have to do the fastboot portion as well (fastboot oem unlock). Then you can flash the tot file and continue the root process.
rubecker said:
I tried using LG Flash Tool with H90120e_00_0316.kdz... it gave the connecting to server error. I had read that this is normal, that I should wait... I waited twice, overnight, and nothing happened.
Did you have success? if so, which version of Flash Tool did you use, with which specific kdz file? and what is your phone version?
Thank you for your input, I will try again using the KDZ I have.
Click to expand...
Click to collapse
Without going into further detail. iMO the lgflash tool doesn't work. Use the LGUP tool instead. And follow those instructions on the link I posted. Lgflash tool is garbage..lol
Sent from my LG-H901 using Tapatalk
sensimila said:
Without going into further detail. iMO the lgflash tool doesn't work. Use the LGUP tool instead. And follow those instructions on the link I posted. Lgflash tool is garbage..lol
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
rubecker said:
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
Click to expand...
Click to collapse
how can you get into downloader mode ? I get stuck on the boot screen, even when trying to access downloader mode. I don't have recovery installed as this happened while trying to install it.
rubecker said:
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
Click to expand...
Click to collapse
could some one help me please?
i have the same problem on the h901 one, i'm triying to get into download mode and it shows the firts screen of DL mode but does not sucess it continue to lg screen triying to boot up and stocks in a boot loop.
elmanolette said:
could some one help me please?
i have the same problem on the h901 one, i'm triying to get into download mode and it shows the firts screen of DL mode but does not sucess it continue to lg screen triying to boot up and stocks in a boot loop.
Click to expand...
Click to collapse
Your phone needs to be connected to PC for that to work. Check if you connected directly to onboard USB port and cable is OK. Also, check if you going in it right: full shutdown (preferebly with battery), hold vol-up and connect it to PC while doing it. It should show small frame with "Download mod" and some dots and go to actual download mode after it detectes connection to PC.
Hawk84r said:
Your phone needs to be connected to PC for that to work. Check if you connected directly to onboard USB port and cable is OK. Also, check if you going in it right: full shutdown (preferebly with battery), hold vol-up and connect it to PC while doing it. It should show small frame with "Download mod" and some dots and go to actual download mode after it detectes connection to PC.
Click to expand...
Click to collapse
I've doing exactly that steps, but i did not do this (Check if you connected directly to onboard USB port and cable is OK). The pc just found it in fastboot mode, i tryied to get it into download mode but not sucess, it attemp go in there but just shows the "small frame with "Download mod" and some dots" and reboots to lg screen and restart over and over
elmanolette said:
I've doing exactly that steps, but i did not do this (Check if you connected directly to onboard USB port and cable is OK). The pc just found it in fastboot mode, i tryied to get it into download mode but not sucess, it attemp go in there but just shows the "small frame with "Download mod" and some dots" and reboots to lg screen and restart over and over
Click to expand...
Click to collapse
Also, you can try holding vol-up again, after download mode screen appeared. What kind of bootloop you area having, by the way? Is it just LG logo or something is writen in red there?
Hawk84r said:
Also, you can try holding vol-up again, after download mode screen appeared. What kind of bootloop you area having, by the way? Is it just LG logo or something is writen in red there?
Click to expand...
Click to collapse
yes, i tryied holding vol-up again, after download mode screen appeared and when i let it continue to normal boot there is something in red color after the Lg logo appears (690 boot varification fail!)
(740 -cause: MISMATCH_SIG_LEN)
Is there a way for taking away?
elmanolette said:
yes, i tryied holding vol-up again, after download mode screen appeared and when i let it continue to normal boot there is something in red color after the Lg logo appears (690 boot varification fail!)
(740 -cause: MISMATCH_SIG_LEN)
Is there a way for taking away?
Click to expand...
Click to collapse
Well, i had exactly the same issue, after relocking bootloader (don't ask ) and download mode did it for me, had no trouble getting in. So - no much help from me at this point, i'm afraid =(
rubecker said:
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
Click to expand...
Click to collapse
how could went into download mode? mine does not let get in there, just shows a piece of frame with download mode and some dots continue forward to loops and shows that too: boot varication fail .... cause mismatch_sig_len
elmanolette said:
how could went into download mode? mine does not let get in there, just shows a piece of frame with download mode and some dots continue forward to loops and shows that too: boot varication fail .... cause mismatch_sig_len
Click to expand...
Click to collapse
Did you ever get a solution to this issue? I know its been ages but i am in exactly the same situation.
hiroprotagonist said:
Did you ever get a solution to this issue? I know its been ages but i am in exactly the same situation.
Click to expand...
Click to collapse
Did you figure this out? I have the same issue.
AlphaDawg74 said:
Did you figure this out? I have the same issue.
Click to expand...
Click to collapse
Sadly i never did
Sorry
fastboot -w erased OS LG ARISTO 2
now im stuck on Secure Start up on the phone
and it cannot be detected on ADB because there is no way to unlock it OEM
Please tell me it is possible to fix this error.
Error: "Unfortunately Settings has stopped"
I have the same problem and I have TWRP installed.
Hey Gr8GuyInSF
1) Download LG Bridge on your PC-computer
2) Make sure your LG Aristo 2 Phone is off and then connect the usb cable into your LG Aristo 2
3) Hold the volume up key
4) Connect the other end of the usb into the PC-computer
5) Your phone should be in download mode-- open LG Bridge
6) Click on Software Recovery Tab
7) Click on the blue underlined Update Error Recovery
THANK YOU
guestx00126 said:
Hey Gr8GuyInSF
1) Download LG Bridge on your PC-computer
2) Make sure your LG Aristo 2 Phone is off and then connect the usb cable into your LG Aristo 2
3) Hold the volume up key
4) Connect the other end of the usb into the PC-computer
5) Your phone should be in download mode-- open LG Bridge
6) Click on Software Recovery Tab
7) Click on the blue underlined Update Error Recovery
Click to expand...
Click to collapse
YOU ARE A LIFE SAVER
I thought it was VOL Down But it was up and you saved my life.
Do you know of a fix for the lg aristo 2 plus? I have the same problem but LG Bridge doesn't detect the device...
dangarbri said:
Do you know of a fix for the lg aristo 2 plus? I have the same problem but LG Bridge doesn't detect the device...
Click to expand...
Click to collapse
The Aristo 2 Plus doesn't have a kdz specific file. It was never made, but tell me more about your issue. I need to know if you can get into fastboot or the OS. Have you installed TWRP yet?
NonStickAtom785 said:
The Aristo 2 Plus doesn't have a kdz specific file. It was never made, but tell me more about your issue. I need to know if you can get into fastboot or the OS. Have you installed TWRP yet?
Click to expand...
Click to collapse
I have installed TWRP, I can get to TWRP, fastboot, download mode, but I cannot get to OS.
Update: Actually, your message made me try lg bridge and this time it worked! I guess they finally updated it with the Aristo 2 Plus. So it's working again!
dangarbri said:
I have installed TWRP, I can get to TWRP, fastboot, download mode, but I cannot get to OS.
Update: Actually, your message made me try lg bridge and this time it worked! I guess they finally updated it with the Aristo 2 Plus. So it's working again!
Click to expand...
Click to collapse
Okay great! Were you able to get TWRP again?
NonStickAtom785 said:
Okay great! Were you able to get TWRP again?
Click to expand...
Click to collapse
Yep, after LG Bridge fixed the boot issue I was able to go through all the other steps posted to install TWRP and Root. The phone is working normally again
dangarbri said:
Yep, after LG Bridge fixed the boot issue I was able to go through all the other steps posted to install TWRP and Root. The phone is working normally again
Click to expand...
Click to collapse
So now your ready for ROM's. I have a custom ROM available via the link on my signature. It's a stock light rooted DeOdexed debloated room.
guestx00126 said:
Hey Gr8GuyInSF
1) Download LG Bridge on your PC-computer
2) Make sure your LG Aristo 2 Phone is off and then connect the usb cable into your LG Aristo 2
3) Hold the volume up key
4) Connect the other end of the usb into the PC-computer
5) Your phone should be in download mode-- open LG Bridge
6) Click on Software Recovery Tab
7) Click on the blue underlined Update Error Recovery
Click to expand...
Click to collapse
Hello there, I have one aristo 2 which was on secure startup so I tried to factory reset it with the buttons but it only shows me the droid bot and an exclamation mark with the words no command, so I tried flashing it with lgup flash tool but when it gets to the end of the flashing process and shows me complete on the PC the phone will not reboot. Instead it goes into fastboot. I tried both the upgrade and refurbish flashing method but the result is always thesame. I used minimal adb to reboot still thesame thing. The phone just goes the fastboot and that's it. Does anyone have any idea about this pls.