Related
I was trying to use odin to get back to a stock rom (UVJFD). Phone was in download, odin was running. Odin suddenly said "not connected" and nothing was listed where com is usually displayed. I unplugged my phone and it immediately displayed a phone, exclamation, computer.
I tried the three button reboot, but it immediately went back to this screen. I've tried all of the options in the 'So you've bricked your phone' stickey, except the soldering method and I can't get it to do ANYTHING.
What do I do? I'm trying to get back to factory. At this point, I may need to send it in.
Just do what you would normally do to get back to download mode. I can't specifically remember the buttons but just jeep trying until it shows up on odin.
Actually I read somewhere that the phone "!" Cpu means that it will already work with odin so I guess try that. Im not certain that it will work immediately. If that doesn't work then do what I said first lol. Don't worry its not bricked this happened to me the day I got my phone hahaha
Sent from my SGH-T959 using XDA App
Phone....!.....PC is just like download mode. I was able to recover from it, when it happened to mine. Maybe the JFD you had was faulty?
But ODIN should recognize your phone.
Completely bricked?
shelbydz wrote: I tried the three button reboot, but it immediately went back to this screen
Click to expand...
Click to collapse
Does that imply that you saw some sort of life in the screen such as any light on the display? If that is the case it is probably worth trying the 301k Resistor method to get to the download screen.
On the other hand if your phone is exactly in the same shape as my phone is then I really feel for you. My screen never shows any life. It appears like the battery is dead and I've tried everything and I know the battery is fully charged.
So my next step is either finding someone with a jtag interface or send it off for repair.
Anyone have suggestions in that next step? Any weekend warriors with a jtag interface where we can send it? Any suggestions as to where to send it (t-mobile is not an option since I'm not using t-mobile)
It keeps rebooting to the icon screen (phone ! computer). I tried plugging it back in, but odin didn't see it.
I'll have to play around with it a bit more to see if I can get it to work.
thx
shelbydz said:
It keeps rebooting to the icon screen (phone ! computer). I tried plugging it back in, but odin didn't see it.
I'll have to play around with it a bit more to see if I can get it to work.
thx
Click to expand...
Click to collapse
Odin should recognize it, try using a different ODIN. Make sure ODIN is running first, with the proper files already loaded "PDA, MODEM, CSC" then plug in phone.
that seemed to work. (loading the files to odin, then connecting) Apparently I had a bad ROM image. It's booting up now.
Thanks for all of the help.
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
dr_rp1234 said:
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
Click to expand...
Click to collapse
OK first, the stock images are 2.1 eclair not 2.2 froyo. Are you sure you have the right files? Are you sure your phone is a t959(3g, no front camera)and not t959v(4g, has front camera). Second, it sounds like a hard brick, if all else fails go to www.mobiletechvideos.com and check out the unbrickable mod and JTAG repair.
If you get your phone in DL mode and you have the correct Odin images, check the repartition box as well as others and run it.
Good luck
sent from my magic box to yours
Remove battery and sim and microsd. Leave out and press and hold power for 30 seconds or so. Leave battery out for a few minutes.
Put battery in and if you are on GB bootloader hold volume up and plug in USB. Might get you to download mode.
I did that with a friends phone about a year ago and got lucky. Odin recognized it. I read that somewhere here on XDA. May be a shot in the dark... but when you get desperate any new ideas to try can be a relief right?
Good luck to you.
After I messed with bootloaders and then tried to get back to stock with Kies I had this problem.
iTz KeeFy said:
You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Click to expand...
Click to collapse
I called Samsung and told them that I was just trying to upgrade to 2.2 with their software and they replaced my PCB (printed circuit board) for no cost (including shipping). I have no idea if they tried to figure out if I had really used Kies (if they could even figure it out with the state my phone was in) or if they just replaced the PCB blindly. Worth a shot, I'd say!
Thanks for your concern.
Zeferden said:
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Click to expand...
Click to collapse
Thanks for your concern.
But it did not work for me.
thanks
iTz KeeFy said:
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Thanks for your concern
Its T mobile vibrant T959.
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
dr_rp1234 said:
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
Click to expand...
Click to collapse
Sorry to say this but your phone is hard bricked, as in nothing can save it but a JTAG or warranty service. You can try to call Samsung and say you hard bricked your phone cause of kies, it worked for another.
Sent from Mount Olympus via Hermes.
you can try this, it works for many user
http://forum.xda-developers.com/showthread.php?p=17858853#post17858853
HELP!
I need help with my Samsung galaxy SGH-T959 Vibrant I got bricked so I was fixing it with odin until my phone fell and it disconnected and red letters and numbers came out. when I try turning my phone on it doesn't until I press the buttons to go to download mode those red numbers come out and I can't do anything. Please Help
When you pulled the battery, after it hung up with Odin, you corrupted the primary Bootloader, because it wasn't completely written in......Last weak possible option is to try every rocker/battery/cable sequence ETC, to get Odin to handshake with the phone!!.....If there's still no sign of life after doing that....Your only option will be to have it JTAG,d in order to rewrite the primary bootloader file back in it.....it'll never power on unless the primary bootloader executes properly!!....you can corrupt the 2ndary BL and the phone will only be soft bricked, but a primary BL corruption is phone DEATH!!....Only place I know of that's reliable is: mobiletechvideos.com....send it to them, they'll rewrite the primary BL back in it and I think 2.1 or 2.2 for you and mail the phone back to you!!....Good luck let us know if you got it powered on with any combination, as that could save another Bricker from having to send it out!!
Randomness Guy........Start your own thread in the troubleshooting forum, AND QUIT TRYING TO HIJACK THIS THREAD!!
Today Evening i went out with my friends, and we took few photos on my mobile.. After that my friend gave my mobile by stating it got stucked. I looked into it, yes it got stucked.. Then i forced it to restart.. it could not start, stucked on bootscreen. so i simply removed the battery and put the mobile into my pocket. once after i reached my home, i started the mobile.. again it got stucked in bootscreen. Then i gone into recovery mode and flashed the same rom (neatrom v4.7) on it from my sd card. Then it got booted, after sometime again it restarted automatcally and stucked on bootscreen. This time i could not even get into recovery mode.. so i downloaded the official stock firmware to install via download mode. Then i tried to flash through odin. it did not got flashed or anything happened for nearly half an hour. so i removed the usb cable from the laptop, immediately phone screen got off.. when i tried to switch on or get into download mode.. my phone does not responds, it is dead. i tried many ways like removing battery and inserting charger while pressing on power button then inserting the battery at the same time. what did i wrong? help me plzzz friends.. what should i do now to get back my mobile?
You plugged out your phone from PC while downloading from Odin?!?!?You completely bricked your device now.Maybe it couldn't flash the kernel or the firmware...Now phone is of course dead.You need to buy a new motherboard.BTW,what firmware did you flash?Do you have I9100 or other variant?
When you flashed a stock ROM, did you flash a pit file as well?
If no, get a jig so you can get to Download mode.
Sent from the little guy
GamingDj said:
You plugged out your phone from PC while downloading from Odin?!?!?You completely bricked your device now.Maybe it couldn't flash the kernel or the firmware...Now phone is of course dead.You need to buy a new motherboard.BTW,what firmware did you flash?Do you have I9100 or other variant?
Click to expand...
Click to collapse
I tried to flash this firmware "Base Firmware: I9100XWLSS (4.1.2)" from http://forum.xda-developers.com/showthread.php?t=1544487
i have I9100
gastonw said:
When you flashed a stock ROM, did you flash a pit file as well?
If no, get a jig so you can get to Download mode.
Sent from the little guy
Click to expand...
Click to collapse
no bro i did not flash a pit file.. i just flashed the md5 file from the firmware zip on pda. the flashing did not occur, it was got stopped in cache.img step.. i have waited for long.. it was showing same status. that's y i removed the cable from it.
Kumarankav said:
no bro i did not flash a pit file.. i just flashed the md5 file from the firmware zip on pda. the flashing did not occur, it was got stopped in cache.img step.. i have waited for long.. it was showing same status. that's y i removed the cable from it.
Click to expand...
Click to collapse
Your initial problem of bootloop could have been easily solved, I don't know what the other people do but when I gave my custom rom installed phone to my brother for a couple of days his friends played with it walla.. Bootloop.. Fix as usual was easy, a cache and dalvik wipe fixed it otherwise a nuke script and a flash would have worked.
But pulling the cable out before flashing is completed or unless terminated by the app itself is a bad thing to do, really bad...
Sent from my GT-I9100 using xda app-developers app
Service centre. You're paying.
I took my mobile to samsung service center, they checked and told that i need to change the motherboard.. which costs Rs.8500..
Kumarankav said:
I took my mobile to samsung service center, they checked and told that i need to change the motherboard.. which costs Rs.8500..
Click to expand...
Click to collapse
Maybe you can buy another on eBay,then you'll just give it to them to replace.Or change it yourself.Both ways you'll save money
Just get a jig and try.
Sent from the little guy
My GT-I9300 international galaxy S3 decided yesterday to brick itself, all of a sudden its stuck at the boot screen (white samsung ... text).
Tried to reboot into recovery but no go, when i hold the buttons it just continues to reboot and reboot, only showing the white text.
Tried to reboot into download and that worked, i though fhew, i got a berak and not all is lost.
In download mode it says current binary Samsung official even though i rooted and changed rom...
Product name is blank, Custom bin download is no, status is custom.
Tried to recover with kies but it complains that it cannot install new firmware (after it downloads the firmware, extracts, and all instruction followed).
Tried with odin (several original roms with my region and the one from kies) but with no luck, odin complains "There is no PIT partition.".
Tried to repartition with GT-I9300_mx_20120329.pit but then it does SET pit and hangs on "Get PIT for Mapping".
Is there any chance to save my phone ? I'm getting really desperate here.
Product name blank = sds. Only samsung service Centre can repair
Sent from my GT-I9300 using Tapatalk 4 Beta
try this
phenixdoc said:
My GT-I9300 international galaxy S3 decided yesterday to brick itself, all of a sudden its stuck at the boot screen (white samsung ... text).
Tried to reboot into recovery but no go, when i hold the buttons it just continues to reboot and reboot, only showing the white text.
Tried to reboot into download and that worked, i though fhew, i got a berak and not all is lost.
In download mode it says current binary Samsung official even though i rooted and changed rom...
Product name is blank, Custom bin download is no, status is custom.
Tried to recover with kies but it complains that it cannot install new firmware (after it downloads the firmware, extracts, and all instruction followed).
Tried with odin (several original roms with my region and the one from kies) but with no luck, odin complains "There is no PIT partition.".
Tried to repartition with GT-I9300_mx_20120329.pit but then it does SET pit and hangs on "Get PIT for Mapping".
Is there any chance to save my phone ? I'm getting really desperate here.
Click to expand...
Click to collapse
Hm, it worked for me once , try connecting it to odin in downlode mode and try installing cmd form there, it should work and help you get your phone back. Since original rom is not working. If that wont work then i am not sure. i need to get a better understand of what you did to it,for the phone to go into brick mode.
a_akash said:
Hm, it worked for me once , try connecting it to odin in downlode mode and try installing cmd form there, it should work and help you get your phone back. Since original rom is not working. If that wont work then i am not sure. i need to get a better understand of what you did to it,for the phone to go into brick mode.
Click to expand...
Click to collapse
No offence, but it's pointless. He has no product name. He needs a replacement Motherboard. It's nothing to do with anything he did.
rootSU said:
Product name blank = sds. Only samsung service Centre can repair
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks, gave it away to a shop, they're gonna try to hardware flash it (JIT/JIP ? i wasn't really listening).