hi every one i am newbie. i have indian version honor 7 bought from flipkart.com.. i flashed uk firmware b100 and i got dual sim enable on my indian version honor 7 but when i forced update to MM 6.0 ( UK version MM 6.0 firmware B320) by pressing volume up+down+power it succesfully upgarded to marshmallow but i got only one sim enabled..can any one help me out to get again second sim working on android 6
Thank You.
The UK version that is PLK-L01 is also having dual sim support, but you shouldn't have flashed UK version over Indian version without debranding it, as both will have different modem partition.
The solution is to have to go back to the PLK-UL00 builds.
Make sure u have purchased dual sim because indian version of honor 7 is single sim
Check does u have 2differnt imei no. Or one (*#06#)
DigiGoon said:
The UK version that is PLK-L01 is also having dual sim support, but you shouldn't have flashed UK version over Indian version without debranding it, as both will have different modem partition.
The solution is to have to go back to the PLK-UL00 builds.
Click to expand...
Click to collapse
Can you try correcting the patch in the below given thread ?
http://forum.xda-developers.com/hon...an-version-t3486133/post69268366#post69268366
vsriram92 said:
Can you try correcting the patch in the below given thread ?
http://forum.xda-developers.com/hon...an-version-t3486133/post69268366#post69268366
Click to expand...
Click to collapse
I don't own an Indian model.
Sent from my PLK-L01 using Tapatalk
bishnu1992 said:
hi every one i am newbie. i have indian version honor 7 bought from flipkart.com.. i flashed uk firmware b100 and i got dual sim enable on my indian version honor 7 but when i forced update to MM 6.0 ( UK version MM 6.0 firmware B320) by pressing volume up+down+power it succesfully upgarded to marshmallow but i got only one sim enabled..can any one help me out to get again second sim working on android 6
Thank You.
Click to expand...
Click to collapse
When the second sim was enabled, were you using both sims at the same time?
Might be a thing easily solved by a factory reset.
zinko_pt said:
Might be a thing easily solved by a factory reset.
Click to expand...
Click to collapse
I tried that.. Didn't work out.
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
muradulislam said:
When the second sim was enabled, were you using both sims at the same time?
Click to expand...
Click to collapse
I got both SIM towers on the notification bar. Incoming call was working for both the SIM's.
All SIM related apps were not working.
I think u will need basic calling app phone app messeging app settings app supporting dual sim ,extrcted from dual sim rom because without them options of 2nd sim are not enabled
swapnil.1834 said:
I think u will need basic calling app phone app messeging app settings app supporting dual sim ,extrcted from dual sim rom because without them options of 2nd sim are not enabled
Click to expand...
Click to collapse
Its already done it seems. But buggy.
Also unable to find the creator till now.
Related
HI Guys!
I couldn't have patience for anyone to post the FTF so i downloaded with xperiafirm and flashed it myself.
to be noted: boot time is slow first (10 -15 mins) after flash.
i post here a link for ftf for E2303 MM 6.0.1: 26.3.A.0.131
1. BALTIC GENERIC
http://s.go.ro/l6gsdfpu
2. CUSTOMIZED FRANCE.
http://s.go.ro/j5wy85kl
Thank you very much!
Hi! I have a stupid question - can I flash the new firmware when I do not have root nor unlocked bootloader? It's just stock. Will it work?
Installed it, thanks, no problems.
e2333
what about e2333...?
Darxor said:
Hi! I have a stupid question - can I flash the new firmware when I do not have root nor unlocked bootloader? It's just stock. Will it work?
Click to expand...
Click to collapse
Yes,you can. It doesn't really matter about root or unlocked BL.
Sent from my E2303 using Tapatalk
For my E2303, after it has settled a litle:
Performance is indeed very much improved.
I got 37000 in Antutu.
the phoneapp is redesigned and now i don't send rejection messages anymore from my pocket
the camera app has swipe through modes functionality which i find great.
also this trick for adoptable storage works
http://forum.xda-developers.com/m4-aqua/general/adoptive-storage-marshmallow-t3421828
velles2003 said:
For my E2303, after it has settled a litle:
Performance is indeed very much improved.
I got 37000 in Antutu.
[/url]
Click to expand...
Click to collapse
I have managed to score only 31k even after the complete reinstall, I have deleted the bloatware and without an inserted SD card.
Does the score really vary so much?
However I can find the phone really smoother than before. Let's hope that it will last.
2353 model
if my model number is e2353, can it works?
it has english? if not can i change the language?
shouqinz said:
if my model number is e2353, can it works?
Click to expand...
Click to collapse
No, these FTFs are for E2303 model only,don't flash them.
Manuelk97 said:
it has english? if not can i change the language?
Click to expand...
Click to collapse
it has English
velles2003 said:
it has English
Click to expand...
Click to collapse
ok thanks I installed and it works like a charm!
How to keep root
I have two very important questions. I want to flash badly however I want to know how to keep root and get back twrp. I have E2303 build .111 with locked bootloader and it is currently rooted and has twerp. I don't want to loose either are there any steps to keep those?
how?
How is it possible that some people have in the middle (button of house) and others circle? How it works? Will I be able to install any language? What about the people that have phone in subscription plans? Can I also install a marshmallow on my aqua m4 in Poland? Please some step by step instructions. Never I did anything like this before. Please help ....best as possible in the form of video.
Question , If I flash the FTF will my Sim card still be functional or would it change the permissions of the sim card acceptance, I am on the Canadian Fido network Fido is Rodgers Partner so both Fido Rodgers network works. I know its prob a easy Q but I honesty dont know.
---------- Post added 17th August 2016 at 12:00 AM ---------- Previous post was 16th August 2016 at 11:55 PM ----------
Hitman951 said:
No, these FTFs are for E2303 model only,don't flash them.
Click to expand...
Click to collapse
Question , If I flash the FTF will my Sim card still be functional or would it change the permissions of the sim card acceptance, I am on the Canadian Fido network Fido is Rodgers Partner so both Fido Rodgers network works. I know its prob a easy Q but I honesty dont know.
Bcoates84 said:
Question , If I flash the FTF will my Sim card still be functional or would it change the permissions of the sim card acceptance, I am on the Canadian Fido network Fido is Rodgers Partner so both Fido Rodgers network works. I know its prob a easy Q but I honesty dont know.
---------- Post added 17th August 2016 at 12:00 AM ---------- Previous post was 16th August 2016 at 11:55 PM ----------
Question , If I flash the FTF will my Sim card still be functional or would it change the permissions of the sim card acceptance, I am on the Canadian Fido network Fido is Rodgers Partner so both Fido Rodgers network works. I know its prob a easy Q but I honesty dont know.
Click to expand...
Click to collapse
It's going to be fine if your phone is unbranded (unlocked)
Sent from my E2303 using Tapatalk
Link is dead men
I got reliance JIo preview offer (unlimited 3 month calling and 4g surfing free) . On my A7(2016) i noticed that Volte sign is not there on the status bar and I was dependent on JioJoin app for VoLTE calling. But I managed to get the VoLTE working on my phone and no longer need JioJoin app to make calls. Stock dialer is working good.
The trick is :
1. Put the JIO SIM in SIM-1 tray of the phone.
2. Go to settings and factory reset the phone.
That's it. After reset, your phone will restart and it will start showing the VoLTE symbol on the status bar. Note that during this process keep your JIO SIM inserted.
Hope it may help someone.
deepak179 said:
I got reliance JIo preview offer (unlimited 3 month calling and 4g surfing free) . On my A7(2016) i noticed that Volte sign is not there on the status bar and I was dependent on JioJoin app for VoLTE calling. But I managed to get the VoLTE working on my phone and no longer need JioJoin app to make calls. Stock dialer is working good.
The trick is :
1. Put the JIO SIM in SIM-1 tray of the phone.
2. Go to settings and factory reset the phone.
That's it. After reset, your phone will restart and it will start showing the VoLTE symbol on the status bar. Note that during this process keep your JIO SIM inserted.
Hope it may help someone.
Click to expand...
Click to collapse
But i used my jio sim directly one the 1st slot....before that i was using airtel 4g on slot 1....i havent factory reset at all...everything is working fine for me....!!!
Sent from my SM-A710F using Tapatalk
riasat.sheikh said:
But i used my jio sim directly one the 1st slot....before that i was using airtel 4g on slot 1....i havent factory reset at all...everything is working fine for me....!!!
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
This may help those who were not getting the VOLTE sign on status bar. If everything was fine for you, that's great.
deepak179 said:
This may help those who were not getting the VOLTE sign on status bar. If everything was fine for you, that's great.
Click to expand...
Click to collapse
I am using SM-A710FD (UAE). This method is not working for me.
Now I am using with JioJoin App.
Does VoLTE support on UAE handset ?
Please help.
I am not sure about UAE handset but if the model is A710FD then it should support VoLTE. Do one thing, download and flash the latest indian MM firmware from SamMobile. Keep your JIO SIM in TRAY 1 slot during that process and you should be able to see VOLTE.
Ashiquemuneer said:
I am using SM-A710FD (UAE). This method is not working for me.
Now I am using with JioJoin App.
Does VoLTE support on UAE handset ?
Please help.
Click to expand...
Click to collapse
deepak179 said:
I am not sure about UAE handset but if the model is A710FD then it should support VoLTE. Do one thing, download and flash the latest Indian MM firmware from SamMobile. Keep your JIO SIM in TRAY 1 slot during that process and you should be able to see VOLTE.
Click to expand...
Click to collapse
Tried that too. No luck. My friend has Galaxy J2 (UAE).
I put my sim in J2 that too not working.
My another friend has Galaxy J2 (India).
Tried with this phone.
Surprise, it's working with VoLTE.
Any suggestions. ?
(*sorry for my English.)
Its worked fine. :laugh:
After the flash once again i wiped all my data via recovery mode. And its worked when its switch on.
Great
Hello people..good morning.
I bought Samsung Galaxy A7 2016 in August 2016. First thing I did was rooted the phone to gain full access. After reading this post gotta know that A7 has Volte in it. I did a factory reset of my phone after reading these post but still haven't got Volte. Can someone please help me.?
Sent from my SM-A710F using Tapatalk
---------- Post added at 03:04 AM ---------- Previous post was at 02:13 AM ----------
Awaiting reply at the earliest...will be greatful..thank you in advance ?
Sent from my SM-A710F using Tapatalk
Jio has thenselves blocked VOLTE hence it is not working. I have a5 2015 and jio was intially showing VOLTE but now all of a sudden it stopped showing
Sent from my SM-A500G using Tapatalk
Plz explain
Ashiquemuneer said:
Its worked fine. :laugh:
After the flash once again i wiped all my data via recovery mode. And its worked when its switch on.
Click to expand...
Click to collapse
Can you explain me the procedure and links. I am also using the uae based a72016 f710d
Oo
Sent from my SM-A710F using Tapatalk
Got volte
At last I got it. I flashed the Indian firmware first and did a factory reset. But still I didn't receive the volte. This happened a week back. But yesterday I received a software update for my phone. After updating the software 200mb I received the volte symbol.
vnnarendran said:
At last I got it. I flashed the Indian firmware first and did a factory reset. But still I didn't receive the volte. This happened a week back. But yesterday I received a software update for my phone. After updating the software 200mb I received the volte symbol.
Click to expand...
Click to collapse
Can you tell me your firmware version ?
Am using a700fd using indian firmware released on october , am not getting volte
This is the software
This is the software version
For enabling VoLTE visit my tread:http://forum.xda-developers.com/samsung-a-series/general/enable-volte-a7-a5-a3-2016-models-t3524091
Deleted
Sent from my SM-A510F using Tapatalk
Hello i have Phone model SM- A700FD..I Didn't get volte on my phone.i have bought it from UAE ..then i changed to indian firmware....then also i did'nt get volte on my mobile pls help me
thanx bro its a710f volte works volte 100%
deepak179 said:
I got reliance JIo preview offer (unlimited 3 month calling and 4g surfing free) . On my A7(2016) i noticed that Volte sign is not there on the status bar and I was dependent on JioJoin app for VoLTE calling. But I managed to get the VoLTE working on my phone and no longer need JioJoin app to make calls. Stock dialer is working good.
The trick is :
1. Put the JIO SIM in SIM-1 tray of the phone.
2. Go to settings and factory reset the phone.
That's it. After reset, your phone will restart and it will start showing the VoLTE symbol on the status bar. Note that during this process keep your JIO SIM inserted.
Hope it may help someone.
Click to expand...
Click to collapse
Did this work f0r you ? I am facing same problem with my Samsung Galaxy A7100 2016
I recently bought this phone from Saudi Arabia
Model number:KIW-L21
Build number:KIW-L21C185B310
EMUI version:EMUI 4.0
Android version 6.0.1
Custom version:CUSTC185D006
While in India i am unable to use Reliance Jio sim,other sim is working perfectly.
Don't know what's wrong with it.I also downgraded it to Lollipop but still not working.
Plz provide me the solution if any.
Arif Arya said:
I recently bought this phone from Saudi Arabia
Model number:KIW-L21
Build number:KIW-L21C185B310
EMUI version:EMUI 4.0
Android version 6.0.1
Custom version:CUSTC185D006
While in India i am unable to use Reliance Jio sim,other sim is working perfectly.
Don't know what's wrong with it.I also downgraded it to Lollipop but still not working.
Plz provide me the solution if any.
Click to expand...
Click to collapse
what do u mean by not able to use ? Aren't u getting signal ? Or not able to use voice over LTE ? Plz clearly explain ,What's the issue ?
Not getting signal,screen displaying Emergency call only.
Went to service centre they told me that it won't run in india as it is from saudi arabia.
clearly a baseband issue..
as the honor 5x is not carrier unlocked, which is carrier specific and regional specific, jio is only for indian models bro..
i dont know if it can be solved by any kinda patch, but it cannot be solved in stock..
Arif Arya said:
Not getting signal,screen displaying Emergency call only.
Went to service centre they told me that it won't run in india as it is from saudi arabia.
Click to expand...
Click to collapse
u have to try this method might work .
http://forum.xda-developers.com/showthread.php?t=1693491
or u need to change IME , trry a IME Generator and search Xda how to Change IME Because the IMEI will Be locked on Some Networks only .
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
and this for repairing the IMEI. ( not sure if it legal ! .
http://forum.gsmhosting.com/vbb/f719/sigma-v-2-18-00-repair-imei-huawei-qcom-models-2116152/
Unless you are in Jammu, Punjab, Uttar Pradesh, Bihar or Jharkhand, you can access JIO Network.
As your KIW-L21 supports one of the JIO bands - Band 3.
I use KIW-L23 in Tamilnadu. My mobile also have only Band 3 support. it works fine.
If you are residing in any of the above mentioned non supporting states, then you can try the method suggested by Romiui above.
installed xposed and changed IMEI using IMEI changer pro,but still not working
Arif Arya said:
installed xposed and changed IMEI using IMEI changer pro,but still not working
Click to expand...
Click to collapse
have you checked installing other jio sims?
may be that specific simcard problem??
Tried but the result is same
Arif Arya said:
Tried but the result is same
Click to expand...
Click to collapse
tried my method ? i posted for u a solution .! .
yup,changed the IMEI but didn't work.Actually i am using CM13,So shall i revert back to stock ROM and follow your guide or shall i stay in CM13 and try.
Confused Where to put the code "in terminal emulator"? by giving command
UN_Lock_code=01547865(or smwhere else)
Arif Arya said:
yup,changed the IMEI but didn't work.Actually i am using CM13,So shall i revert back to stock ROM and follow your guide or shall i stay in CM13 and try.
Confused Where to put the code "in terminal emulator"? by giving command
UN_Lock_code=01547865(or smwhere else)
Click to expand...
Click to collapse
it doesn't matter which rom u r using . make sure u make EFS backup its very very important .
after backup The EFS Throw TWRP send it to somewhere save in ur laptop
unlocking code is not needed since u have custom rom so u have already unlocked ur device .
just follow the steps to change IMEI Throw The Link i Sent . I never tested but i read feedbacks into same web site and get confirmed that the app working !.,.,
Hope U luck .
I already changed IMEI using xposed and IMEI changer but it didn't work .Moreover i changed device ID and android ID using device faker still not working.
Arif Arya said:
I already changed IMEI using xposed and IMEI changer but it didn't work .Moreover i changed device ID and android ID using device faker still not working.
Click to expand...
Click to collapse
ok all i know now that u lost ur IMEI With You're EFS . U need To Follow With us into this thread ,
http://forum.xda-developers.com/showpost.php?p=70016937&postcount=22
that need work !. i'll try to help !
I m using Sony Xperia X (F5122 - FW 34.2.A.247) and it does not supporting Volte feature, *#*#4636#*#* Dialer options are not helping as the flag turns off automatically after exiting the menu . Is there any way we can activate/enable Volte on Xperia X dual (any custom ROM) or by rooting ?
david_30new said:
I m using Sony Xperia X (F5122 - FW 34.2.A.247) and it does not supporting Volte feature, *#*#4636#*#* Dialer options are not helping as the flag turns off automatically after exiting the menu . Is there any way we can activate/enable Volte on Xperia X dual (any custom ROM) or by rooting ?
Click to expand...
Click to collapse
The above mention build having VoLTE support, you need VoLTE SIM to enable VoLTE option. Go to settings>More>Mobile Networks> Enable VoLTE
I have VoLTE sim inserted and I don't have VoLTE option in the mobile networks menu (only LTE option available)
So pls help on this issue
To use VoLTE your mobile provider must support this feature on Xperia X Dual, maybe even branded software is needed on your phone.
Here is the image
david_30new said:
I m using Sony Xperia X (F5122 - FW 34.2.A.247) and it does not supporting Volte feature, *#*#4636#*#* Dialer options are not helping as the flag turns off automatically after exiting the menu . Is there any way we can activate/enable Volte on Xperia X dual (any custom ROM) or by rooting ?
Click to expand...
Click to collapse
I too own the same model and confirm that volte is available in this phone
See screen shot below
Goto settings and then mobile networks and check. But as it was already mentioned above it depends on the carrier network
I too have same model and no. Volte option . Plz help in this issue
Hai,,, I also had same problem but I found a solution for it. Your firmware will be problem. I mean your generic version will be some other country. So download India generic nougat stock firmware (34.2.A.0.266) and flash it. Any doubt mail me [email protected] Thank you
vinayk said:
I too own the same model and confirm that volte is available in this phone
See screen shot below
Goto settings and then mobile networks and check. But as it was already mentioned above it depends on the carrier network
Click to expand...
Click to collapse
what generic firmware you are using ? and i have volte enabled sim in SIM 2 will that be an issue ?
nayvihd said:
Hai,,, I also had same problem but I found a solution for it. Your firmware will be problem. I mean your generic version will be some other country. So download India generic nougat stock firmware (34.2.A.0.266) and flash it. Any doubt mail me [email protected]. Thank you
Click to expand...
Click to collapse
I have 1302-3405 Malaysia generic firmware with latest version (34.2.A.2.69) do i have to downgrade my firmware to Indian generic 34.2.A.0.266 to have this feature enabled or can i flash the latest Indian generic firmware 34.2.A.2.69 ?
david_30new said:
I have 1302-3405 Malaysia generic firmware with latest version (34.2.A.2.69) do i have to downgrade my firmware to Indian generic 34.2.A.0.266 to have this feature enabled or can i flash the latest Indian generic firmware 34.2.A.2.69 ?
Click to expand...
Click to collapse
Am not sure about latest firmware. But 34.2.A.0.266 has enabled VoLte option and it's also dependent on network carrier too.
---------- Post added at 04:30 PM ---------- Previous post was at 04:28 PM ----------
david_30new said:
what generic firmware you are using ? and i have volte enabled sim in SIM 2 will that be an issue ?
Click to expand...
Click to collapse
Insert VoLte enabled sim in slot 1.
OK thank you dude will check with latest Indian generic firmware
david_30new said:
OK thank you dude will check with latest Indian generic firmware
Click to expand...
Click to collapse
Xperia X Dual_F5122_34.2.A.0.311_India_Generic 7.0
You are going to try this frimware right ??? Please let me know whether this firmware enable volte option or not.
Thanks in advance.
nayvihd said:
Xperia X Dual_F5122_34.2.A.0.311_India_Generic 7.0
You are going to try this frimware right ??? Please let me know whether this firmware enable volte option or not.
Thanks in advance.
Click to expand...
Click to collapse
Latest Indian generic firmware is 34.2.A.2.69. I tried with other countries firmware but couldn't see volte option. Can u update your Indian firmware to latest version 34.2.A.2.69 and let us know
Can anyone tell which countries latest firmware ( 34.2.A.2.69) has volte enabled
david_30new said:
Latest Indian generic firmware is 34.2.A.2.69. I tried with other countries firmware but couldn't see volte option. Can u update your Indian firmware to latest version 34.2.A.2.69 and let us know
Click to expand...
Click to collapse
Previously I had this frimware, and I don't find volte. This is not Indian generic frimware version. Latest indian generic firmware version is 34.2.A.0.311. So try flashing this latest indian frimware.
nayvihd said:
Previously I had this frimware, and I don't find volte. This is not Indian generic frimware version. Latest indian generic firmware version is 34.2.A.0.311. So try flashing this latest indian frimware.
Click to expand...
Click to collapse
Current customized version is 34.2.A.2.69
david_30new said:
Current customized version is 34.2.A.2.69
Click to expand...
Click to collapse
That version I had...no volte option ..
nayvihd said:
That version I had...no volte option ..
Click to expand...
Click to collapse
Then only India firmware 34.2.A.0.266 has volte option ? thats very bad... only option to get volte is to downgrade to 34.2.A.0.266 (from 34.2.A.2.69) is there any other work around for this ? or has to wait for 7.1.2 update?
david_30new said:
Then only India firmware 34.2.A.0.266 has volte option ? thats very bad... only option to get volte is to downgrade to 34.2.A.0.266 (from 34.2.A.2.69) is there any other work around for this ? or has to wait for 7.1.2 update?
Click to expand...
Click to collapse
I have 34.2.A.2.69 with VoLTE option, which SIM are you using?
PPGOVEKAR said:
I have 34.2.A.2.69 with VoLTE option, which SIM are you using?
Click to expand...
Click to collapse
Happy to hear that i am using Vodafone and Jio. can you tell me which country firmware you are using so that i can use that latest firmware (34.2.A.2.69) with VoLTE.
Hi. I can't wait for another 3 months to get Android 9 together with One UI. I hoped that I can get beta version, but unfortunately it's available in selected countries only.
I thought that I will be able to bypass that block with VPN, I did it once for Good Lock 2018 using this post from Reddit. But I didn't succeed with the Android P beta.
The thing is, you need to use Samsung Members app to participate in testing, but looks like it detects your country using CSC. I have no other idea because I pulled out a SIM card from the smartphone, activated VPN, disabled GPS. But I still couldn't trick it.
So my question is, do you have any other ideas how I can install beta version of Android P? Should I wait for the ROM here at the forum? Or maybe I can change CSC someone without root (yes, I checked the forum but there's still no clear answer if I can do it or not as of 14th of November, 2018)? Appreciate any ideas
Flash another frimware via odin.
Search sammobile with your model number.
Sent from my SM-G960F using Tapatalk
TechnoBOY* said:
Flash another frimware via odin.
Search sammobile with your model number.
Sent from my SM-G960F using Tapatalk
Click to expand...
Click to collapse
I found some firmwares for my model number. Do I understand correctly that I can install whatever country I want disregarding my CSC code? E.g. my CSC code is TTR for Austria, can I install BTU for UK?
th1rt3nth said:
I found some firmwares for my model number. Do I understand correctly that I can install whatever country I want disregarding my CSC code? E.g. my CSC code is TTR for Austria, can I install BTU for UK?
Click to expand...
Click to collapse
Just make sure that it has same chipset as your model
Ie some models have snapdragon others have Samsung's exynos
Sent from my SM-G960F using Tapatalk
TechnoBOY* said:
Just make sure that it has same chipset as your model
Ie some models have snapdragon others have Samsung's exynos
Sent from my SM-G960F using Tapatalk
Click to expand...
Click to collapse
Thank you, got it!
I think you should to have a simcard from one of the states of the beta to receive it
---------- Post added at 03:14 PM ---------- Previous post was at 03:05 PM ----------
Just one question. Which version i have to install to make my italian sgs9+ Ready to receive the beta? This is good? https://ibb.co/g5LqAL
vuoshino said:
I think you should to have a simcard from one of the states of the beta to receive it
---------- Post added at 03:14 PM ---------- Previous post was at 03:05 PM ----------
Just one question. Which version i have to install to make my italian sgs9+ Ready to receive the beta? This is good? https://ibb.co/g5LqAL
Click to expand...
Click to collapse
BTU should be fine, that's the one that I want to try as well. As for the SIM card, don't think that it's actually needed.
I flashed BTU firmware, but for some reasons, it didn't apply.. I still have the same CSC and my regional apps are still there. Does anyone have any idea why it could have happened?
UPD. Looks like I was able to install BTU. At first, I flashed AP, but I had to flash CSC as well. So I did it in 2 steps. After flashing CSC my smartphone reloaded into recovery menu. I made factory reset from there and that's it!
th1rt3nth said:
I flashed BTU firmware, but for some reasons, it didn't apply.. I still have the same CSC and my regional apps are still there. Does anyone have any idea why it could have happened?
UPD. Looks like I was able to install BTU. At first, I flashed AP, but I had to flash CSC as well. So I did it in 2 steps. After flashing CSC my smartphone reloaded into recovery menu. I made factory reset from there and that's it!
Click to expand...
Click to collapse
I suggest you to read the old beta threads from last year. As far as i remember you need a SIM-Card, for example Lyca, wich can be changed to different countries via SIM-Tool App. but lets see if the beta arrives today after all.
madphone said:
I suggest you to read the old beta threads from last year. As far as i remember you need a SIM-Card, for example Lyca, wich can be changed to different countries via SIM-Tool App. but lets see if the beta arrives today after all.
Click to expand...
Click to collapse
Not sure now.. When I was setting up the phone after clean install, everything looked like it was BTU. But I didn't find beta invitation in Samsung Members. After that I download an app to check my current CSC code and it appears to be XSP for Singapore.. I tried to flash it several times, flash AP only, flash CSC only, nothing has helped..
But it could work though, as I have Bixby voice now (it wasn't available before). I'll post here once I have any updates.
Nobody has an invitation in Samsung members at this point!
madphone said:
Nobody has an invitation in Samsung members at this point!
Click to expand...
Click to collapse
How about Samsung+, Have anyone register beta ?
i cant register beta cuz my sim doesnt match csc
i cant register beta cuz my sim doesnt match csc..........................damnit samsung!!!!!!!!!!!!!!!!Ive been waiting for a day and keeping refresh samsung member app,it finally came out but require a goddamn samsung account with original csc sim card, Ive been flash 2 firmware and boot it up without sim card,not working,so I guess it needs a account with match sim card,SAD
Innnovation955 said:
i cant register beta cuz my sim doesnt match csc..........................damnit samsung!!!!!!!!!!!!!!!!Ive been waiting for a day and keeping refresh samsung member app,it finally came out but require a goddamn samsung account with original csc sim card, Ive been flash 2 firmware and boot it up without sim card,not working,so I guess it needs a account with match sim card,SAD
Click to expand...
Click to collapse
Did you get the notification?
Segamalaga said:
Did you get the notification?
Click to expand...
Click to collapse
sure i got it,i just cant register, i already bought a korean sim card ,hopefully i can get it tommorow and beta wont close by then
I have german sim and there is no notification.. ? need to do something to get the beta ?
although I have a german S9 +, Android Pie beta still isn't available for me. So maybe you'll just have to wait a little bit and then retry with vpn?
[/COLOR]
th1rt3nth said:
Not sure now.. When I was setting up the phone after clean install, everything looked like it was BTU. But I didn't find beta invitation in Samsung Members. After that I download an app to check my current CSC code and it appears to be XSP for Singapore.. I tried to flash it several times, flash AP only, flash CSC only, nothing has helped..
But it could work though, as I have Bixby voice now (it wasn't available before). I'll post here once I have any updates.
Click to expand...
Click to collapse
Go to Settings->About Phone.
See what country it shows..
Sent from my SM-G960F using Tapatalk
VPN is of no usem
Sent from my SM-G960F using Tapatalk
Nothing happens after click the 'register' button.
Sad
Who has the same problem?
My device is G965U1 (ARJ2)