Umi Rome help - Android Q&A, Help & Troubleshooting

I have a umi rome android 5.1 V3.05 speaker and loudspeaker problem,sound is very weak.
"BestLoudness" is activated but when rings is pretty quietly. When i reply another person i
hear pretty quietly,and when i play music its also pretty quietly. My wife have umi romeX
and its about 30% louder. In engineer mode i checked audio sound normal mode,headset
mode,loudspeaker mode & headset loudspeaker mode and compare the two phones and
all is the same but my is too quiet. Could you help me how to solve this problem?
Please help!

Related

Replacement speaker for X10? Mine is distorted

One day, after I took my X10 out of silent mode, the "boop" sound for volume adjustment wasn't clear. Tried music and it was quite obviously distorted. Sound through the headphones remained perfectly clear!
Music distortion is one thing, but this makes my ringer much quieter
If the headphones are clear, it seems like it can't be the internal amplifier.
Does anybody know where a replacement speaker can be found?
if i'm not mistaken, a speaker of that size cannot possibly give you the type of sound you would find on a desktop computer.
and if i'm not mistaken as well, speakers of all phones are really horrible, compared to using the headphones. so it's a normal thing.
i believe there are speaker accessories for the x10. look at SE's global website
To clarify:
The phone had clear sound for months.
One day, the sound was distorted.
It has remained distorted, even at low volumes.
The headphone sound is still clear.
Therefore, I suspect the speaker is damaged.
I don't want external speakers, I want to hear my ringtone when I get a call!!!
(bump)
Any sources for X10 parts???
why don't you send it to se that they repair it for you ?
here is a page with spare parts:
http://www.swissmania.ch/category_10721_15845_42000_48340/Ersatzteile.html
call me crazy, but blow (using your mouth!!) into the speaker holes. My old C905 had the same thing and it turned out to be dust/sand/junk that was stuck in the speaker hole - causing the speaker to distort!
worth a shot hey!

[Q] Earphone Jack Sound Problem

Just Going mad on my S2 i installed beats audio and then after that my phone became hot i turned it off and turned is on again
after that sound from earphones is playing around i tried different headset same problem
sound if low and in one earphone volume is very low
loudspeaker and everytin else working awesome
galaxy s2 service mode (5) AUDIO also not working
what i tried
flashed rom with full wipe
replaced headphone jack problem still exists
i wanna kno whats making the sound to distort and its very low help appreciated
did you found a fix for your problem ? cause i got the same problem ...

[Q] Bluetooth&Speaker Call Audio To Low - What to do?

Hello
Im having a problem with my s3 sound quality during a call, both with my bluetooth car kit and the phone speaker. On my bluetooth car kit, the sound is to low, even after i set it up to max on the phone and on the radio and the other person does hear me fine (it uses the mic from the car) but i can barely hear the other person.
The other issue is also during a call, if i put it to speaker ( which i did after i couldnt hear anything on bluetooth), the sound is still to low and i can barely understand what the other person is saying.
Its very annoying and its the first phone where this happens, even cheaper phones i had didn't had these issues. So i was wondering if anyone knows a solution for this? I thought of doing this sound mod- http://forum.xda-developers.com/showthread.php?t=1722136 - but im not sure if it works and im also afraid to set the volume to high and break the speaker. I also thought about the "acid audio mod", but i think thats just for music quality.
Thank you for your time

JBA Speaker mod

Is it just me or is the JBL speaker mod really quiet on the Z3 play?
My original Z play has bit the dust so I can't compare but I am sure it used to be fairly loud, now its barley louder than the Z3 speakers (better quality of course)
Does anyone else have the JBL speaker mod on their Z3 play?
I just purchased the Moto Speaker Mod with the Motorola Logo off Amazon... Will report its sound and volume quality when it delivered to me soon.
dr_strangetrick said:
Is it just me or is the JBL speaker mod really quiet on the Z3 play?
My original Z play has bit the dust so I can't compare but I am sure it used to be fairly loud, now its barley louder than the Z3 speakers (better quality of course)
Does anyone else have the JBL speaker mod on their Z3 play?
Click to expand...
Click to collapse
I just picked up the jbl sound booster 2 and had a similar problem. Was getting a lot of static coming out of one speaker and volume wasn't very loud. My fix was going into mod manager while mod was connected and reseting the mod. Works much better now with no static. Found this solution by reading numerous Moto forums
Ok, cheers ill give that a try
OK, tried restarting the mod
It kills the JBL then when I detach and re-attach the volume is the same
I have the original JBL speaker mod, not the JBL2
Does anyone else have speakers they can try or does anyone have suggestions please?
This happens to me sometimes but usually only when battery saver mode is on
As an update to anyone following, since Pie update everything back to normal
Now I have both new and old version
Old version is recommended if you have it rooted and installed Dolby.
Sound is much louder with old version (good for watching Netflix)

Any way to get the phone speaker to ring when bluetooth headphones are connected?

Hi!
Got this little nagging issue that is bothering me. At work I use a bluetooth Jabra65 headset. Problem is I don´t wear on my head all the time (talkin to coworkers, listening to audio through speakers etc) and have them around my neck. When doing this I keep missing calls since the ring signal is played through the headset (which I´m not wearing) and not through the phone speaker.
I really would like the ring signal to be played BOTH on the phone and through the bluetooth headset. Any way to set this up? I´ve tried all the audio and bluetooth settings I could find on the Mate 10p but no success. Thanks for any advice.
Lo and behold! Just half an hour after I posted above I got a call and got loud and clear signal on both phone and in headphones . Magic! ....or maybe the upgrade to android10 that landed last night?

Categories

Resources