Fast help needed please - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hello,
so to start it off, I have a SM-925F Galaxy S6 Edge, and have a corrupt EFS.img on it, I do have the original aswell, but since the phone won't boot up and only gets to recovery or installation, how should I go about fixing it?
Thank you.

Boot into download mode and install the stock firmware via odin. There are several tutorials here on how to do so.
Sent from my SM-G925P using Tapatalk
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
If that doesn't work look up the last resort option where you use a partition table file to repartition and reinstall the firmware. That one is extremely risky.
Sent from my SM-G925P using Tapatalk

pickles523 said:
Boot into download mode and install the stock firmware via odin. There are several tutorials here on how to do so.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Thank you but that does not fix the problem. Have tried several times, still E:failed to mount /efs

Then sounds as if the partition table is your only resort. It completely wipes all partitions and recreates them allowing for the installation afterwards but has to be done with the firmware or else total brick
Sent from my SM-G925P using Tapatalk

pickles523 said:
Then sounds as if the partition table is your only resort. It completely wipes all partitions and recreates them allowing for the installation afterwards but has to be done with the firmware or else total brick
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
I am completely new to Androids and therefor have no clue what you're talking about and can't find any guides .

I can try and guide you tomorrow. For me it is 3:50AM and I need to rest. I can help in about 10 hours. Are you able to do that?
Sent from my SM-G925P using Tapatalk
---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ----------
Im going to head to sleep. Message me with a time that would be suitable for you. I am in a central time zone so please with it in my zone or the time and what zone you are in.
Sent from my SM-G925P using Tapatalk
---------- Post added at 08:55 AM ---------- Previous post was at 08:55 AM ----------
Also pm me
Sent from my SM-G925P using Tapatalk

Can I not flash my recovery.img with odin? What confuses me about this is that I need to get a .tar file, which I have no idea what is or how to get.

Anyone got any ideas except the re-partition? I don't know the PDA so hard to find an official firmware for it, with the pit files and everything

So I used smartswitch emergency recover and now the phone boots up to optimising or something apps, gets to like 11 and sometimes 13 out of 26 and keeps restarting

Holy ****, its working after smartswitch reset

But now I have an imei like 000000000000000000356 or something.

Related

Help with bootloop

Hi all.
Would really appreciate some help here. I'm trying to unroot/back to stock my S3 before selling it. I was running CM10.1 on it. Here is what I did:
- downloaded a zip from "Samsung updates". Unzipped it and it had a tar.md5 and another file called "SS_DL.dll"
- downloaded Odin 3.07
- started Odin, then plugged the phone while in Download mode. The ID:COM turned blue.
- loaded the tar.md5 in PDA and clicked start
-the image flashed and said successful at the end
now I'm stuck at boot loop. Was the flashing procedure correct?? Or was the image corrupted or something??
Sent from my Nexus 4 using xda app-developers app
YDardeer said:
Hi all.
Would really appreciate some help here. I'm trying to unroot/back to stock my S3 before selling it. I was running CM10.1 on it. Here is what I did:
- downloaded a zip from "Samsung updates". Unzipped it and it had a tar.md5 and another file called "SS_DL.dll"
- downloaded Odin 3.07
- started Odin, then plugged the phone while in Download mode. The ID:COM turned blue.
Thats wrong for starters
-
Flash the firmware following the instructions
jje .
Click to expand...
Click to collapse
Before flashing through Odin anything you got to make sure you have the right .tar files. That being said, you searched for the .tat file corresponding your device?
Edit: Another thing, when you plug your phone in download mode the right color is yellow. It doesnt matter what is says it has to be yellow before continuing.
Sent from my SPH-L710 using xda premium
---------- Post added at 01:22 PM ---------- Previous post was at 01:12 PM ----------
Follow this tutorial step by step!
http://galaxys3root.com/galaxy-s3-r...an-stock-firmware-for-galaxy-s3-i9300-unroot/
Sent from my SPH-L710 using xda premium
mar.ioo said:
Before flashing through Odin anything you got to make sure you have the right .tar files. That being said, you searched for the .tat file corresponding your device?
Edit: Another thing, when you plug your phone in download mode the right color is yellow. It doesnt matter what is says it has to be yellow before continuing.
Sent from my SPH-L710 using xda premium
---------- Post added at 01:22 PM ---------- Previous post was at 01:12 PM ----------
Follow this tutorial step by step!
http://galaxys3root.com/galaxy-s3-r...an-stock-firmware-for-galaxy-s3-i9300-unroot/
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
As mentioned in the video, booting into recovery and doing a full wipe after flashing the image did the trick. Thanks a lot man
Sent from my Nexus 4 using xda app-developers app
YDardeer said:
As mentioned in the video, booting into recovery and doing a full wipe after flashing the image did the trick. Thanks a lot man
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Glad to help bud!
Sent from my SPH-L710 using xda premium

locked SGS3

i have andyXrom
and i did put a password
and unfortunately i forgot it
and i don't want to install a new rom
how can i open it ??
btw no matter how many times i put the password wrong i get 30 seconds to put the password again
Only way would be factory reset or just try dirty flashing the rom
Sent from my SPH-L710 using xda premium
i have whatsapp massages
the only reason i don't want to factory reset :crying:
Hmm..Maybe this site could help you?
http://droidlessons.com/how-to-reset-your-android-lock-screen-password/
didn't have any luck with any sulotion
factory reset is your only option! your what's app msgs will be restored if you flash a stock rom I think!
sent from my GT-I9300 using iOS 7
Passwords are designed not to be circumvented.
If you work out where the whatsapp database is, you could connect phone in recovery mode and adb pull the database before ressetting the phone
Sent from my GT-I9300 using Tapatalk 2
any videos or tutorials on that ?
Probably.
First Google where whatsapp keeps its data...
Plenty of guides to use adb if you Google it
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 08:03 PM ---------- Previous post was at 07:45 PM ----------
Check out this toolkit. It can do the pull for you
http://forum.xda-developers.com/showthread.php?p=27239761
Sent from my GT-I9300 using Tapatalk 2

Baseband version unknown

My phone froze on me earlier and threw me into bootloops. Recovery didn't work, so I flashed it again. Then I did a factory reset and flashed my rom again and I have no service at all and the play store doesn't work.
How do I get my baseband back?
For some reason the phone can't find the internal storage. I don't know how to fix this.
Sent from my SCH-I605 using Tapatalk 4 Beta
benwalburn said:
My phone froze on me earlier and threw me into bootloops. Recovery didn't work, so I flashed it again. Then I did a factory reset and flashed my rom again and I have no service at all and the play store doesn't work.
How do I get my baseband back?
For some reason the phone can't find the internal storage. I don't know how to fix this.
Click to expand...
Click to collapse
If your phone can see the external card you could download a baseband from xda, copy it the card then flash the baseband from there.
Ridin' a Note 2 blast
universexda said:
If your phone can see the external card you could download a baseband from xda, copy it the card then flash the baseband from there.
Ridin' a Note 2 blast
Click to expand...
Click to collapse
I tried two different ones from here, but it still says baseband unknown.
On another note, fixing permissions fails completely. It seems I'm completely borked
Sent from my SCH-I605 using Tapatalk 4 Beta
It might be best to restore to stock and start over. DL alternate restore and flash that from Odin. If that doesn't work then root66.
Ridin' a Note 2 blast
Considering all the issues I'm having, root66 looks like the best way to go. Thank you.
Sent from my SCH-I605 using Tapatalk 4 Beta
benwalburn said:
Considering all the issues I'm having, root66 looks like the best way to go. Thank you.
Sent from my SCH-I605 using Tapatalk 4 Beta
Click to expand...
Click to collapse
If you use Root66 it doesn't completely wipe your phone like VRALJB or VRALL4 so you need to check the NAND Erase box in Odin before starting the flash.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
If you use Root66 it doesn't completely wipe your phone like VRALJB or VRALL4 so you need to check the NAND Erase box in Odin before starting the flash.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
I flashed root66 and it's stuck on the splash screen. Does it take a while to boot after that? I did factory reset and I had to format /data because TWRP thought I had encrypted data.
Update: flashed JellyBeans but it has no storage available (negative value on internal storage). Still no service. Flashing any of the modems that Scottsroms has does not update it. Maybe I can get it through odin. I heard that it takes a few minutes to flash a new modem, but it only takes a few seconds on my phone and does nothing
Successfully flashing a modem via TWRP only took a few seconds for me.
Ridin' a Note 2 blast
---------- Post added at 03:17 PM ---------- Previous post was at 03:07 PM ----------
If you haven't already you may want to reformat internal storage and or flash root66 with the pit file or after that with both of those and Nand erase selected in Odin.
Ridin' a Note 2 blast
universexda said:
Successfully flashing a modem via TWRP only took a few seconds for me.
Ridin' a Note 2 blast
---------- Post added at 03:17 PM ---------- Previous post was at 03:07 PM ----------
If you haven't already you may want to reformat internal storage and or flash root66 with the pit file or after that with both of those and Nand erase selected in Odin.
Ridin' a Note 2 blast
Click to expand...
Click to collapse
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
How do you Flash the Full Stock?
benwalburn said:
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
Click to expand...
Click to collapse
I am having the same baseband unknown problem. What do I do?
benwalburn said:
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
Click to expand...
Click to collapse
That's why I and other users recommended you select NAND erase in Odin when using Root66, it isn't that it doesn't update everything it just doesn't completely wipe everything.
Sent from my SCH-I605 using XDA Premium HD app
---------- Post added at 03:40 PM ---------- Previous post was at 03:40 PM ----------
darcy6901 said:
I am having the same baseband unknown problem. What do I do?
Click to expand...
Click to collapse
Flash roo66 in Odin with NAND Erase checked.
Sent from my SCH-I605 using XDA Premium HD app
NOTE II Baseband
benwalburn said:
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
Click to expand...
Click to collapse
It sounds like you were able to fix your problem. I think I am having the same problem as you. Could you please tell me in detail what you did? I have been rooting phones for almost 5 years now but this Note 2 is an entirely different beast.
darcy6901 said:
It sounds like you were able to fix your problem. I think I am having the same problem as you. Could you please tell me in detail what you did? I have been rooting phones for almost 5 years now but this Note 2 is an entirely different beast.
Click to expand...
Click to collapse
Ever fix it?

[Q] Need help with device after recovery flash

I got the Verizon HTC One Max today... Successfully got bootloader unlock, root, and S-OFF (thanks to rumrunner!).
Found CWM Touch/Non-Touch recovery as well as TWRP. Tried flashing both via fastboot and neither would actually load when telling device to boot into recovery. Tried installing TWRP via GooManager, no go. Tried installing CWM via ROM Manager, no go. Recovery not found for either is what I was pretty much running in to.
Decided to try flashing recovery for Verizon HTC One (via ROM Manager), it says it worked, but still would not boot into recovery. Ever since then, though, I cannot get service and device will be on for a minute or two and then reset.
Manually flashed TWRP and CWM and now it seems to boot into recovery (with either), but still no service and still resetting every minute or two.
Cannot find RUU for this device, nor can I find radio to flash or stock recovery.
Help me! I want my phablet back! lol
thehomebiscuit said:
I got the Verizon HTC One Max today... Successfully got bootloader unlock, root, and S-OFF (thanks to rumrunner!).
Found CWM Touch/Non-Touch recovery as well as TWRP. Tried flashing both via fastboot and neither would actually load when telling device to boot into recovery. Tried installing TWRP via GooManager, no go. Tried installing CWM via ROM Manager, no go. Recovery not found for either is what I was pretty much running in to.
Decided to try flashing recovery for Verizon HTC One (via ROM Manager), it says it worked, but still would not boot into recovery. Ever since then, though, I cannot get service and device will be on for a minute or two and then reset.
Manually flashed TWRP and CWM and now it seems to boot into recovery (with either), but still no service and still resetting every minute or two.
Cannot find RUU for this device, nor can I find radio to flash or stock recovery.
Help me! I want my phablet back! lol
Click to expand...
Click to collapse
Where did you "find" cwm and twrp? Different versions from other forums 'sometimes' contain other partitions with them.
Should only use:
http://forum.xda-developers.com/htc-one-max/orig-development
Recoveries are made from a device specific kernel. The One kernel is very similar to the Max but not exact. There is work being done to get usable pieces of a decrypted Verizon Max ruu. Not sure what you can do until available.
Jiggity Janx said:
Where did you "find" cwm and twrp? Different versions from other forums 'sometimes' contain other partitions with them.
Should only use:
http://forum.xda-developers.com/htc-one-max/orig-development
Click to expand...
Click to collapse
I "found" the recoveries from the following locations:
TWRP 2.6.3.0 and HERE
then
ClockworkMod Touch Recovery 6.0.4.5
I typically don't go anywhere but XDA Developers...
Jiggity Janx said:
Recoveries are made from a device specific kernel. The One kernel is very similar to the Max but not exact. There is work being done to get usable pieces of a decrypted Verizon Max ruu. Not sure what you can do until available.
Click to expand...
Click to collapse
Yeah, that's kinda what I've come to realize. I guess I'll just have to go without for a while. This is why I have backup phones! Lol
Sent from my SCH-I545 using xda app-developers app
I was wondering if you went elsewhere in xda initially since you ended up going to One forum and flashing that recovery. Could possibly ask someone to pull kernel from Verizon Max and create flashable zip.
---------- Post added at 04:33 PM ---------- Previous post was at 04:28 PM ----------
I try to help where I can but its a busy time and im not even a dev.
---------- Post added at 04:40 PM ---------- Previous post was at 04:33 PM ----------
thehomebiscuit said:
Yeah, that's kinda what I've come to realize. I guess I'll just have to go without for a while. This is why I have backup phones! Lol
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Dont go without. You have custom Max recovery installed now and we have the files for someone in here to create you some flashable zips of stock kernel and stock recovery to try. Decrypted ruu pieces are needed when you cant flash with custom recovery.
Just ask in General for someone to create flashable zips.
Jiggity Janx said:
I was wondering if you went elsewhere in xda initially since you ended up going to One forum and flashing that recovery. Could possibly ask someone to pull kernel from Verizon Max and create flashable zip.
---------- Post added at 04:33 PM ---------- Previous post was at 04:28 PM ----------
I try to help where I can but its a busy time and im not even a dev.
---------- Post added at 04:40 PM ---------- Previous post was at 04:33 PM ----------
Dont go without. You have custom Max recovery installed now and we have the files for someone in here to create you some flashable zips of stock kernel and stock recovery to try. Decrypted ruu pieces are needed when you cant flash with custom recovery.
Just ask in General for someone to create flashable zips.
Click to expand...
Click to collapse
Any recommendations as to which recovery to use (TWRP or CWM)?
thehomebiscuit said:
Any recommendations as to which recovery to use (TWRP or CWM)?
Click to expand...
Click to collapse
Read through both threads. Both are having some issues right now and are not perfect but should mostly work.
Jiggity Janx said:
I was wondering if you went elsewhere in xda initially since you ended up going to One forum and flashing that recovery. Could possibly ask someone to pull kernel from Verizon Max and create flashable zip.
---------- Post added at 04:33 PM ---------- Previous post was at 04:28 PM ----------
I try to help where I can but its a busy time and im not even a dev.
---------- Post added at 04:40 PM ---------- Previous post was at 04:33 PM ----------
Dont go without. You have custom Max recovery installed now and we have the files for someone in here to create you some flashable zips of stock kernel and stock recovery to try. Decrypted ruu pieces are needed when you cant flash with custom recovery.
Just ask in General for someone to create flashable zips.
Click to expand...
Click to collapse
Now I might be in even more trouble... Whenever I power on, I immediately go to TWRP recovery, even after fastboot flashing CWM recovery...
I posted stock recovery for you in your other thread. Thanks to the developer for the app flashify who worked me last night and today to get this app working for the one max .
Sent from my HTC6600LVW using Tapatalk 4
It would be great if you started a thread that explained how flashify works with the Max now. I tried it earlier on and it didnt work. With it we dont necessarily need flashable zips for stock files.
---------- Post added at 07:58 PM ---------- Previous post was at 07:35 PM ----------
thehomebiscuit said:
Now I might be in even more trouble... Whenever I power on, I immediately go to TWRP recovery, even after fastboot flashing CWM recovery...
Click to expand...
Click to collapse
Are you sure you are still soff? Cant go flashing those other files if not.
---------- Post added at 08:10 PM ---------- Previous post was at 07:58 PM ----------
Just in case you or anyone is wondering you cannot use flashify unless you can boot into android as it is an app.
Yes sir. Bootloader unlocked and S-OFF. Booting into Android is not an option, so I'm wondering how I go about flashing these files provided to me being in .bin format? Can I flash them using fastboot? Or can I rename .bin to .img?
Sent from my SCH-I545 using xda app-developers app
Just add the .IMG to the files. They are IMG files.
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 09:38 PM ---------- Previous post was at 09:23 PM ----------
And by the way guys.....there will be an updated flashify on the market shortly that will support both kernel and recovery backup creation while booted into android. It runs as a regular app and simply requires root. It will also flash custom kernels and recoveries as well.
Sent from my Nexus 7 using Tapatalk 4
dottat said:
Just add the .IMG to the files. They are IMG files.
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 09:38 PM ---------- Previous post was at 09:23 PM ----------
And by the way guys.....there will be an updated flashify on the market shortly that will support both kernel and recovery backup creation while booted into android. It runs as a regular app and simply requires root. It will also flash custom kernels and recoveries as well.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
There is onandroid for that now if anyone needs it.
Is the kernel the same thing as the radio? Please excuse my n00bness.
Sent from my SCH-I545 using xda app-developers app
No its not. Have you flashed those two yet ?
Sent from my Nexus 7 using Tapatalk 4
I haven't yet. Working at the moment. Will do as soon as I get home. What fastboot command do I use to flash the kernel?
Sent from my SCH-I545 using xda app-developers app
thehomebiscuit said:
I haven't yet. Working at the moment. Will do as soon as I get home. What fastboot command do I use to flash the kernel?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Fastboot flash boot (bootfilename)
Just replace the (bootfilename) part with the file name you are using
Example
Fastboot flash boot g6f789c8.img
Edit- also I checked and found that drop box must have added the .bin extension. The flashify app leaves them without extension because it assumes they are .IMG files. Therefore, they can simply be renamed to .IMG. Didn't notice that in the hurry to post.
Sent from my Nexus 7 using Tapatalk 4
dottat said:
Fastboot flash boot (bootfilename)
Just replace the (bootfilename) part with the file name you are using
Example
Fastboot flash boot g6f789c8.img
Edit- also I checked and found that drop box must have added the .bin extension. The flashify app leaves them without extension because it assumes they are .IMG files. Therefore, they can simply be renamed to .IMG. Didn't notice that in the hurry to post.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Awesome. I thank you for the help. I'll let you know if it's a success. Will be the first thing to do upon getting home, after grabbing a beer of course. Lol
Sent from my SCH-I545 using Tapatalk
What you need to do is fastboot the stock recovery, you shouldn't need the stock boot.img unless you tried to flash someone else's kernel for a different device... Anyways yeah you need to fastboot the stock recovery by rebooting in to bootloader and typing "fastboot flash recovery recovery.img" given the stock recovery is "recovery.img" which it should be.. Once stock recovery is installed boot in to the stock recovery any way you can possibly get to it and do a full factory data reset.. This will wipe the entire phone as well as reset the Verizon radio/baseband and theoretically you should be able to boot right back up and cell and data connection should resume as normal! Good luck and PM me if you need any further help and I'll give you my gmail/hangouts so you can hit me up directly right there..
thehomebiscuit said:
Awesome. I thank you for the help. I'll let you know if it's a success. Will be the first thing to do upon getting home, after grabbing a beer of course. Lol
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse

phone appears to be bricked

I am stuck in ODIN mode on my Note 3 and it says downloading... do not turn off target. I can boot with volume down and cancel but it just goers their again. Volume up goes to TWRP but i can’t get my phone to just turn on normally. I was not attempting anything. This is how my phone turned on...If I try to reboot in TWRP it notes their is no OS installed. Please help....
You wiped phone either install rom or restore your backup in twrp.... If none of that works then find mj4 Odin it and your good. .
Sent from my SM-N900P using Xparent BlueTapatalk 2
Yea, what epix said, load a rom into your SD card and boot back into twrp and flash it.
Sent from my SM-N900P using Tapatalk
I tried reflashing with ODIN and now I no longer have TWERP... These are the two screens I can get to. I have tried multiple files on ODIN but they all fail... Not sure what to do now.
sahara0207 said:
I tried reflashing with ODIN and now I no longer have TWERP... These are the two screens I can get to. I have tried multiple files on ODIN but they all fail... Not sure what to do now.
Click to expand...
Click to collapse
Then try exactly what what it says, recovery mode in Kies
Sent from my SM-N900P using xda app-developers app
49ml said:
Then try exactly what what it says, recovery mode in Kies
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
Sorry I could must have accidentally deleted my next paragraph. When I use Kies it does not recognize the phone. I have tried Kies and Kies 3.
Do you have any recovery at all? (Stock)
Sent from my SM-N900P using Tapatalk
sahara0207 said:
I tried reflashing with ODIN and now I no longer have TWERP... These are the two screens I can get to. I have tried multiple files on ODIN but they all fail... Not sure what to do now.
Click to expand...
Click to collapse
You need to re flash twrp in Odin to get your recovery back and there is a file out there that you can flash in twrp that should square you back to factory. I believe @micmars has helped with this issue before. Perhaps he remembers the thread in which he found it the first time? I will search and try to post you a link.
Sent from my SM-N900P using Tapatalk
mhutton said:
You need to re flash twrp in Odin to get your recovery back and there is a file out there that you can flash in twrp that should square you back to factory. I believe @micmars has helped with this issue before. Perhaps he remembers the thread in which he found it the first time? I will search and try to post you a link.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Yup. Go to TWRP, navigate to wipe, flick the padlock, factory reset, reboot.
If that doesn't work, let me know ASAP. I can try other means to get you back...
Sent from my SM-N900P using Xparent BlueTapatalk 2
---------- Post added at 01:44 AM ---------- Previous post was at 01:43 AM ----------
sahara0207 said:
I tried reflashing with ODIN and now I no longer have TWERP... These are the two screens I can get to. I have tried multiple files on ODIN but they all fail... Not sure what to do now.
Click to expand...
Click to collapse
That, my friend, is a horrible photo to see...please stand by.
You do not want this in Kies...
Sent from my SM-N900P using Xparent BlueTapatalk 2
---------- Post added at 01:55 AM ---------- Previous post was at 01:44 AM ----------
sahara0207 said:
I am stuck in ODIN mode on my Note 3 and it says downloading... do not turn off target. I can boot with volume down and cancel but it just goers their again. Volume up goes to TWRP but i can’t get my phone to just turn on normally. I was not attempting anything. This is how my phone turned on...If I try to reboot in TWRP it notes their is no OS installed. Please help....
Click to expand...
Click to collapse
Check your PM sir.
Sent you files and instructions for getting back...
Sent from my SM-N900P using Xparent BlueTapatalk 2
---------- Post added at 02:05 AM ---------- Previous post was at 01:55 AM ----------
sahara0207 said:
I am stuck in ODIN mode on my Note 3 and it says downloading... do not turn off target. I can boot with volume down and cancel but it just goers their again. Volume up goes to TWRP but i can’t get my phone to just turn on normally. I was not attempting anything. This is how my phone turned on...If I try to reboot in TWRP it notes their is no OS installed. Please help....
Click to expand...
Click to collapse
The calvary has spoken (not me, just a guy whom knows)..."They need to just odin MJ4, problem solved."
Sent from my SM-N900P using Xparent BlueTapatalk 2
Thanks! I will try as soon as i get to my office. My home laptop is a mcabook pro. My office desktop has ODIN on it. I really appreciate it.

Categories

Resources