Related
Just got this phone. Not real fimiliar with aosp. If I'm on 10b firmware with bumped twrp can I flash any Rom no matter it's base is ie 11 or 12b
alphamale said:
Just got this phone. Not real fimiliar with aosp. If I'm on 10b firmware with bumped twrp can I flash any Rom no matter it's base is ie 11 or 12b
Click to expand...
Click to collapse
You can flash any Verizon Rom at this point. The Rom's won't include the updated modems, if you want to update those you can flash them separetely - http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
BOOTSTACK (KK and L) for G2 Mini
Supported variants: D618, D620, D620R
By @Xemidra
LG D618 KK BOOTSTACK
FIX UNKNOWN BASEBAND
Fix Sim Card Issue after flashing Custom ROM on stock Lollipop 5.0.2
I'm not a Dev just ported the LG L90 bootstack to our LG D618
If you flashed CM12 or any custom rom from LG stock 5.0.2 you will not have SIM SUPPORT
unless you :
1- Go back to KK : root, unlock bootloader and flash TWRP to Flash the custom rom
or
2- Flash the KK bootstack to have SIM Support
You will need ROOT, unlocked bootloader and custom recovery (TWRP recommended) to flash this.
Confirmed working on my D618 please repport if working or not
If you use it, it's at your own risk i will not take any resposability for damage to your device​
Unlocked Bootloader and TWRP included​
Credits and thanks to :
@Xemidra for LG L90 bootstack
@myllo.setya for TWRP 2.8.7.0
@Zaaap72 for unlocked bootloader
DOWNLOAD :
Version : 1.1
Updated TWRP 2.8.7.0
ONLY D618
Version : 1
TWRP 2.8.6.0
ONLY D618
Flash via recovery!
D620?
panagiotisden2 said:
D620?
Click to expand...
Click to collapse
Sorry i'm not a dev maybe dev will help you porting to D620 you just have to extract files from de v10 kdz and get TWRP and the patched aboot.bin for the d620 and replace files in the zip with the D620 files that's what i did with D618
numpea said:
Sorry i'm not a dev maybe dev will help you porting to D620 you just have to extract files from de v10 kdz and get TWRP and the patched aboot.bin for the d620 and replace files in the zip with the D620 files that's what i did with D618
Click to expand...
Click to collapse
Ok thank you
panagiotisden2 said:
Ok thank you
Click to expand...
Click to collapse
if you need help just pm me
numpea said:
if you need help just pm me
Click to expand...
Click to collapse
I will try to port it for D620 but now i have no time i will try it later, if i need your help i will pm you.
Thanks again
If you can provide me unlocked bootloaders for different variants of G2 Mini and fully working recovery (TWRP preferred) then I can create a various versions of bootstack (KitKat and Lollipop) for all variants for you for free.
That's of course if @numpea is OK with that. I don't won't to step in anyone's playground and steal their toys.
Of course i tried to help d618 variant but it will be great if you can help all the variants
Here you go kitkat unlocked bootloaders http://forum.xda-developers.com/g2-mini/development/bootloader-unlock-t2827748
Lollipop unlocked bootloaders http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
And working twrp http://forum.xda-developers.com/showpost.php?p=60401975&postcount=2
:good:
BOOSTACK support for D618, D620, D620R is available here:
http://forum.xda-developers.com/g2-...bootstack-kk-l-unknown-baseband-imei-t3142805
Flash in stock or in the cusrom( cm12, blisspop)
Tested by u, or untested... Tanks brother...
Sorry bad englis
oneichal said:
Flash in stock or in the cusrom( cm12, blisspop)
Tested by u, or untested... Tanks brother...
Sorry bad englis
Click to expand...
Click to collapse
if you are on stock 5.0.2
you need it when you flash a custom rom (cm12, blisspop) to make mobile network works
and you can flash it before or after flashing the custom rom
i just tested the KK bootstack for d618 and it worked great with me
please repport after you flash it !
numpea said:
if you are on stock 5.0.2
you need it when you flash a custom rom (cm12, blisspop) to make mobile network works
and you can flash it before or after flashing the custom rom
i just tested the KK bootstack for d618 and it worked great with me
please repport after you flash it !
Click to expand...
Click to collapse
Thanks brother
I will try, but not now am in blisspop rom
New Update :
- Included TWRP 2.8.7.0
Please report if tested
So here's where I am and how I got here... Just got an lg g3 that was running 12b and immediately wanted to put CM on it like I have with all my other samsung phones. Root / TWRP went on no problem, my problems began when I decided to update to CM 12.1. Found out my baseband was incompatible so I installed modem for 35b (no problem) then installed cm12.1 and gapps. After it booted up, it tells me I have no sim card installed. Usually this is modem driver related, but I can't find anyone who has had this problem.
Anyone have any advice?
There's other partitions needed than the modem for the 35B modem to work. Flash one of @xdabbeb 's bootstacks in his VS985 v2.0 ROM thread in Development.
Very important: flash the 24B bootstack before flashing any ROM other than @xdabbeb 's. After flashing the ROM you can try flashing the 35B bootstack. If that doesn't work, try the 24B bootstack.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Cm 12 an 13 run fine with 35b just flash 35b bootstack them the Rom works fine.
Sent from my VS985 4G using XDA Free mobile app
Thanks for the replies. I got it working with the 24b modem. I'll try flashing the bootstack so I can have 35b going.
Installing that bootstack got everything working except google maps hangs on load and eventually has to be forceclosed. Can't find that this is a known issue w/ cm13, so it must be something I messed up during my buggered install.
I'm on the same boat, installed CM12 with 12B and ran fine, updated to 12.1 and 24B, still got reception, but once I flashed CM13 with 35B sim card stopped working.
Verizon VS985
I went from cm12.1 to cm13 yesterday and had this same issue on the 35b bootstack. The ROM would not detect the sim card at all and cellular network options was greyed out. I tried reflashing a few times and same result everytime. I gave up on trying to get that to work and went to stock marshmallow which is okay but id love to get cm13 working. I am also running a straight talk sim card so I don't know if that would cause any issues on the 35b bootstack or not. I never had any issues on lollipop besides having to change my APN settings for data. Also on stock marshmallow in the setup wizard it detects that my sim card is not for Verizon wireless so I go change the network settings from global to LTE/GSM/UMTS and it picks it right up.
I have the same issue. Running resurrection remix 6.0.1 with 35b. Verizon sim works but tmobile sim does not.
roirraW "edor" ehT said:
There's other partitions needed than the modem for the 35B modem to work. Flash one of @xdabbeb 's bootstacks in his VS985 v2.0 ROM thread in Development.
Very important: flash the 24B bootstack before flashing any ROM other than @xdabbeb 's. After flashing the ROM you can try flashing the 35B bootstack. If that doesn't work, try the 24B bootstack.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Click to expand...
Click to collapse
pls how can i download 24b modem and flash it?
torniex said:
pls how can i download 24b modem and flash it?
Click to expand...
Click to collapse
For just the modem, @bweN diorD 's stickied thread in the General section. For the whole 24B Bootstack, @xdabbeb 's VS985 v2.0.0 ROM thread in the Development (non-original) section. The Bootstack would be easier since I know it's in a zip file - not sure if the modem is, so it'll be easier to flash in TWRP.
hi there!
I'm flashing CM13 on my VS985, I try flashing the 24B bootstack, 35b and doesn't work the network. Isn't trouble about APN and things like this. Simply my phone doesn't recognize my sim. Hardware is completly working, i'm using CM12 and work fine, CM13 have some bug?
roirraW "edor" ehT said:
There's other partitions needed than the modem for the 35B modem to work. Flash one of @xdabbeb 's bootstacks in his VS985 v2.0 ROM thread in Development.
Very important: flash the 24B bootstack before flashing any ROM other than @xdabbeb 's. After flashing the ROM you can try flashing the 35B bootstack. If that doesn't work, try the 24B bootstack.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Click to expand...
Click to collapse
darwyn001 said:
hi there!
I'm flashing CM13 on my VS985, I try flashing the 24B bootstack, 35b and doesn't work the network. Isn't trouble about APN and things like this. Simply my phone doesn't recognize my sim. Hardware is completly working, i'm using CM12 and work fine, CM13 have some bug?
Click to expand...
Click to collapse
You should probably check in the CM13 thread. I haven't tried CyanogenMod in over a year, I'm always not satisfied enough with it over debloated stock - too buggy for me. I think lots of people in the CM13 thread have mentioned problems with the network/mobile data and/or possible solutions.
ThunderClam said:
Thanks for the replies. I got it working with the 24b modem. I'll try flashing the bootstack so I can have 35b going.
Click to expand...
Click to collapse
please i'm having the same problem can you tell me exactly how u fixed it ?
---------- Post added at 04:59 PM ---------- Previous post was at 04:54 PM ----------
ThunderClam said:
Thanks for the replies. I got it working with the 24b modem. I'll try flashing the bootstack so I can have 35b going.
Click to expand...
Click to collapse
please i'm having the same problem can you tell me exactly how u fixed it ?
Fix It!
I can fix it, I just need flash the 24b bootstack, cm 12.1, run the system, after flash cm13 and do wipe data. This is the solution for me.
roirraW "edor" ehT said:
You should probably check in the CM13 thread. I haven't tried CyanogenMod in over a year, I'm always not satisfied enough with it over debloated stock - too buggy for me. I think lots of people in the CM13 thread have mentioned problems with the network/mobile data and/or possible solutions.
Click to expand...
Click to collapse
Hello everybody
I have a few questions regarding my phone and I hope you can help me solve them. I have the VS985 and I had it on 35b Lollipop 5.1.1 I was able to root it but then I realized there's no custom recovery for it yet, I was planning to try skydragon, so I downgraded using the TOT method to 10, so far so good, nonetheless, in order for me to try to install that ROM I read that I had to have the 35b boostack, so I installed the xdabbeb_vs98535b_bootstack.zip file, TWRP 2.8.7.0 says that installs successfully, I restart the phone but when I go to baseband says unknown and sure enough I can't install skydragon or cm13 because it says I don't have the 35b baseband.
I've tried the 24b, 23c and 12b modems, all get me baseband unknown and get no signal on Tmobile. The TOT I used was LG G3 VS985 10B_03 Stock TOT. I've been looking online and everybody says just flash the baseband on TWRP and voila! but not my case, I can flash it but doesn't work.
Any help is very much appreciated. Thank you.
Hello!
It is incorrect that you have to have the 35B bootstack to be on SkyDragon (same with JasmineROM). The only time it's a must is if you want to use Advanced Calling, or just plain want to use the latest modem. SkyDragon and JasmineROM contain several partitions from 24B. Flashing the ROM after the bootstack is what caused the issue, because critical partitions in the 35B bootstack were overwritten by their 24B counterparts that are in the ROM.
If you want the 35B bootstack, then you need to flash that after having flashed SkyDragon.
roirraW "edor" ehT said:
Hello!
It is incorrect that you have to have the 35B bootstack to be on SkyDragon (same with JasmineROM). The only time it's a must is if you want to use Advanced Calling, or just plain want to use the latest modem. SkyDragon and JasmineROM contain several partitions from 24B. Flashing the ROM after the bootstack is what caused the issue, because critical partitions in the 35B bootstack were overwritten by their 24B counterparts that are in the ROM.
If you want the 35B bootstack, then you need to flash that after having flashed SkyDragon.
Click to expand...
Click to collapse
Hello there!
So let me explain a bit more about my situation, I currently have 4.4.2 stock 10b I downgraded from 35b 5.1.1. I rooted the phone and installed TWRP but when I try to flash CM 12.1 or CM 13, I mentioned skydragon but my mistake is CM what I want to flash, I always get the error that the modem isn't the right one, I've tried with several modems and same error. What can I do install CM?
Thank you
Elendil_23 said:
Hello there!
So let me explain a bit more about my situation, I currently have 4.4.2 stock 10b I downgraded from 35b 5.1.1. I rooted the phone and installed TWRP but when I try to flash CM 12.1 or CM 13, I mentioned skydragon but my mistake is CM what I want to flash, I always get the error that the modem isn't the right one, I've tried with several modems and same error. What can I do install CM?
Thank you
Click to expand...
Click to collapse
Either flash the 23C or 24B modem before flashing CM12.1/13. The 24B bootstack contains the 24B modem so you can flash that before trying to flash CM.
Edit: I haven't tried CM12.1 in a long time, and I've never tried CM13 so this is based only on old information which was definitely true at one time, at least for CM12.1. Repeat, no personal experience with CM13. I only chimed in at the mention of SkyDragon.
roirraW "edor" ehT said:
Either flash the 23C or 24B modem before flashing CM12.1/13. The 24B bootstack contains the 24B modem so you can flash that before trying to flash CM.
Edit: I haven't tried CM12.1 in a long time, and I've never tried CM13 so this is based only on old information which was definitely true at one time, at least for CM12.1. Repeat, no personal experience with CM13. I only chimed in at the mention of SkyDragon.
Click to expand...
Click to collapse
Hey there!
Thank you for your help! Well this I what I've tried, I restored to 10b using TOT I installed all modems, 12b, 23c, 24b and 35b and all of them are giving me unknown baseband afterwards, I get no signal, so I figured I'll install CM on top, but guess what? it always gives me the error that the baseband isn't the right one. I'm not trying to restore to 10b by using the KDZ method and then I'll install the modem. I don't know what is going on.
Thank you for helping on this.
P.D. I'll try skydragon to see what happens, I didn't install it because I read gives no data on Tmobile.
Elendil_23 said:
Hey there!
Thank you for your help! Well this I what I've tried, I restored to 10b using TOT I installed all modems, 12b, 23c, 24b and 35b and all of them are giving me unknown baseband afterwards, I get no signal, so I figured I'll install CM on top, but guess what? it always gives me the error that the baseband isn't the right one. I'm not trying to restore to 10b by using the KDZ method and then I'll install the modem. I don't know what is going on.
Thank you for helping on this.
P.D. I'll try skydragon to see what happens, I didn't install it because I read gives no data on Tmobile.
Click to expand...
Click to collapse
Hello! I have an update
So this is what I did, I downloaded SkyDragon V6.0.2 and installed on the 10b vesion and it worked just fine, I didn't want to risk to try to flash CM anymore but so far everything is working! even data on roaming, I'm currently in Canada and the Telus network is flying, over 70mb on download, as a matter of fact, I never seen those speeds in the US, at least where I live.
I'm sure if I flash CM from TWRP it will work because I'm using the 35b baseband.
Thank you all for your help!
Merry Christmas and Happy 2016!
Elendil_23 said:
Hello! I have an update
So this is what I did, I downloaded SkyDragon V6.0.2 and installed on the 10b vesion and it worked just fine, I didn't want to risk to try to flash CM anymore but so far everything is working! even data on roaming, I'm currently in Canada and the Telus network is flying, over 70mb on download, as a matter of fact, I never seen those speeds in the US, at least where I live.
I'm sure if I flash CM from TWRP it will work because I'm using the 35b baseband.
Thank you all for your help!
Merry Christmas and Happy 2016!
Click to expand...
Click to collapse
Cool, glad you got what you need. You're welcome!
HAPPY NEW YEAR!
Hi everyone. I was read a lot off discussions about i9100 with CM12.1 but I still don't know how to do it without some problems.
My phone actually running CM13.1 latest nightly build with Team Win TWRP recovery v 2.8.XXX and maybe DorimanX kernel? I don't know how to find Kernel name and version... I would like to ask you how to go to Cm12.1 build with pico or nano GAPPS (And what build I should download). I need the most stable build for daily use. Next how to replace CM recovery with TWRP 3.0.2. . I am totally confused. I'll be glad for any help.
Oh. I have that problem too. CM 13.1 not stable!
Jaccob25 said:
Hi everyone. I was read a lot off discussions about i9100 with CM12.1 but I still don't know how to do it without some problems.
My phone actually running CM13.1 latest nightly build with Team Win TWRP recovery v 2.8.XXX and maybe DorimanX kernel? I don't know how to find Kernel name and version... I would like to ask you how to go to Cm12.1 build with pico or nano GAPPS (And what build I should download). I need the most stable build for daily use. Next how to replace CM recovery with TWRP 3.0.2. . I am totally confused. I'll be glad for any help.
Click to expand...
Click to collapse
Firstly look under settings -> about device and it will tell you the kernel version. If it says 3.0.101-CM------, you have the stock CM13 kernel. You said you have TWRP 2.8.x.x and not CM recovery?? This means you already have the isorec recovery enabled. All you need to do is flash the 3.0.2-1 .img from this recovery and you will have the newer one installed. And just do normal backup/wipes and install CM12.1 as you would any other rom. Just remember to use 5.1 gapps(arm;5.1;pico/nano)
Here is the last official CM12.1 I uploaded
Here is a more up to date unofficial CM12.1
noppy22 said:
Firstly look under settings -> about device and it will tell you the kernel version...
Click to expand...
Click to collapse
Yes I have stock cm13 kernel and TWRP flashed. Can I flash new TWRP via Odin?
Thank you very much!
Jaccob25 said:
Yes I have stock cm13 kernel and TWRP flashed. Can I flash new TWRP via Odin?
Thank you very much!
Click to expand...
Click to collapse
I don't think you can flash a .img file with odin. Honestly if you want to downgrade to 5.1.1 it would be easier to do it in one go.
Flash CM12.1, gapps, then TWRP 3.0.2-1.img all from TWRP 2.8
noppy22 said:
I don't think you can flash a .img file with odin. Honestly if you want to downgrade to 5.1.1 it would be easier to do it in one go.
Flash CM12.1, gapps, then TWRP 3.0.2-1.img all from TWRP 2.8
Click to expand...
Click to collapse
Ohh I thought that TWRP can't flash img file.
Thanks for advice. I try it today.
So I try that and almost everything works fine. Only GPS fixing seems like a little bit problematic. But I don't know my testing was short. I will see.
May I ask a supplementary question - I am in a similar position, I have an i9100 which I upgraded from stock 4.1.2 Jelly Bean to CM13 following (most of) djibe's guide here
So I now have CM13 ROM with kernel version 3.0.101, re-partitioned with Lanchons repit, and with recovery TWRP 3.1.0 installed and functioning.
I want to revert from CM13 to CM12.1. From above, I believe that I can simply backup, wipe, then flash the CM12.1 ROM (I'll be using the last nightly, cm-12.1-20160203-NIGHTLY-i9100.zip) - is that correct?
My question/confusion is, do I also need to flash an isorec-compatible kernel (ie kernel-Lanchon-TRIM-IsoRec-20160111-cm-12.1-i9100.zip)? The isorec thread (here) says that the "Official CyanogenMod 12.1 and 13 kernels are now IsoRec-compatible", so it seems to me unnecessary, but many threads/guides on XDA say to flash one of Lanchon's kernels.
Please could someone advise, and my apologies for what is probably an ignorant question.
teraghik said:
May I ask a supplementary question - I am in a similar position, I have an i9100 which I upgraded from stock 4.1.2 Jelly Bean to CM13 following (most of) djibe's guide here
So I now have CM13 ROM with kernel version 3.0.101, re-partitioned with Lanchons repit, and with recovery TWRP 3.1.0 installed and functioning.
I want to revert from CM13 to CM12.1. From above, I believe that I can simply backup, wipe, then flash the CM12.1 ROM (I'll be using the last nightly, cm-12.1-20160203-NIGHTLY-i9100.zip) - is that correct?
My question/confusion is, do I also need to flash an isorec-compatible kernel (ie kernel-Lanchon-TRIM-IsoRec-20160111-cm-12.1-i9100.zip)? The isorec thread (here) says that the "Official CyanogenMod 12.1 and 13 kernels are now IsoRec-compatible", so it seems to me unnecessary, but many threads/guides on XDA say to flash one of Lanchon's kernels.
Please could someone advise, and my apologies for what is probably an ignorant question.
Click to expand...
Click to collapse
You are correct. Isorec support was implemented before that last nightly iirc. No need to flash any kernels.
Note: Only use the official TWRP 3.1 from the TWRP website or the.gangster's one which is basically the same. They are compatible with the earlier android versions.
Hi Noppy,
Thanks very much for taking the time to reply and help - I am using "the gangsters" TWRP 3.1 from djibe's thread, appreciate the heads up. I can confirm that I flashed CM12.1, and it works fine!
Why don't you follow my tutorial to get the perfect smooth Android 7.1 for SGS2 ?
Here it is : https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601