Hi!
I flashed TWRP with odin, booted into it, then restarted to system and I had bootloop. So i flashed no-verify-opt-encrypt with TWRP, restarted and I have error "Kernel is not Seandroid Enforcing" and I can't boot into system.
I tried to hard reset, flash stock recovery, flash stock rom with odin, but nothing helped.
PLEASE PLEASE PLEASE HELP!!
Hi bro. What kernel you flashed ?
And what version of TWRP ?
Because in TWRP 3.0.0 you have to go to "settings", "advanced", "terminal" and type "reboot" for reboot properly your device or you have bootloops.
Envoyé de mon SM-G925F en utilisant Tapatalk
khaltondz said:
Hi bro. What kernel you flashed ?
And what version of TWRP ?
Because in TWRP 3.0.0 you have to go to "settings", "advanced", "terminal" and type "reboot" for reboot properly your device or you have bootloops.
Envoyé de mon SM-G925F en utilisant Tapatalk
Click to expand...
Click to collapse
I didn't flash any kernel. I have the newest twrp 3. But now I don't have bootloop, but I have "Kernel is not Seandroid Enforcing".
You rooted your phone ? So you flash a kernel bro. "Kernel is not SEAndroid En forcing " is a normal message he didnt cause any damage on your phone dont worry about this bro.
Envoyé de mon SM-G925F en utilisant Tapatalk
But I can't boot to system
EDIT:
Here is log for flashing stock rom from Odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
EDIT:
I flashed XtreStoLite with TWRP, and it fixed EVERYTING! My phone is now working very good.
Related
Coming from LiquidSmooth 2.9
Ran triangleaway, then went into download mode, and flashed
KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5
Odin reported:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> sboot.bin
<ID:0/003> tz.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Phone rebooted and now I'm just getting the Samsung logo continuously..
Power on, swirly logo, SAMSUNG, swirly logo, SAMSUNG etc..
Help Please.
How do I get this back to stock ?
Thanks
Basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Probable fail to wipe phone .
Factory reset flash rom again
JJEgan said:
Basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Probable fail to wipe phone .
Factory reset flash rom again
Click to expand...
Click to collapse
Thanks
Obviously should have read this before I started.
Can you advise the best way forward now. ?
Do I try again using Odin and the same file ?
Thanks
Probably should mention I was following this guide:
[Tut] Unroot the Galaxy SIII (for stock updates/warranty)
I would try flashing recovery and then wiping the phone .
JJEgan said:
I would try flashing recovery and then wiping the phone .
Click to expand...
Click to collapse
I managed to get into recovery and that told me it applied BTU.
I've cleared the data/factory reset and cache.
Phone has rebooted and now it appears to have loaded
Thanks
Hello,
i try to install twrp on my s6 edge, but now it will not start anymore, the screen is following the samsung Logo black.
i try to install the original firmware from sammobile, but it stuck or give me an error.
what can i do? i try on 2 computer, 2 usb cable and and and... its the same all time
can you help me pls?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FAUT1AOCN_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
sure you using latest Odin..? and firmware matches..?
try from odin 1.85 to 3.10 all
What model of s6 edge you haw??Look on samifirmware for yours model.Use odin 3.10.6 i think
and use the right region code BTW branding code..for free Germany it's dbt as example..
I hate to say it, but I have the exact same issue...
I tried to install TWRP, now the screen just goes blank after the Samsung logo.
I have downloaded the latest O2 UK firmware, flashed as normal using odin 3.10.6, and I get a "fail" too
Please could someone suggest something?
Thanks
EDIT: Re-flashed root, and all good again!
Guys i was upgrading official firmware through ODIN, but it failed. Tried flashing TWRP Recovery as well and below error occured. Need help as my S6 Edge 925F is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PIT related error bothers me .......
@aneeqkhan I know this thread is a bit dated now, but nobody has replied to you question either? I am trying to recover my friends Galaxy S6 Edge SM-G925I, his bricked after a failed standard OTA update. Flashing stock firmware worked for about 1 week then the whole thing crashed and is un-bootable. Attempting to flash the exact same firmware again in hopes that I could boot into recovery (recovery by button combination DOES NOT WORK!) so was hoping to just boot and factory reset (I was thinking that maybe a data corruption was the cause we didn't wipe his phone because he didn't back it up)...upon putting the device into download mode and flashing the exact same firmware package that worked the week before I get the same error that you are getting? Not only that but none of the claimed fixes online for these devices has worked!?
Note: This is a 100% stock device never had anything flashed to it before I got it and still hasn't had anything custom flashed to it either
I am more interested now if you managed to recover your S6 and if so how did you do it?
hi guys i think i have really f**ked up my galaxy s6 edge.
i attempted to root and install twrp on it using odin and it passed fine but when it booted up it came up with the galaxy loading screen but with tiny red writing saying "recovery is not seandroid enforcing" the two led button flash a few times while on this screen then goes to a black screen!
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
these are the files i flashed if that is any help?
ive been sitting here for a few hours now panicking cause i have a bad feeling ive bricked it!
can anyone be kind enough to help me get this phone sorted?
kind regards,
Mike
ive just tried flashing the stock firmware and it failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCZ_G925FVFG1AOC4_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As long as you have TWRP installed with success, you should be fine. I was in the same mess for about 2 days. Finally flashed CARHD ROM , full wiped and still I have that red message, at least it boots that rom, and the rom is awesome.
ALso flash supersu, you need that before HD ROM I believe. That was my way out. Hope it helps..
Do you know if TWRP installed correctly? If it did this is an easy fix. :good: If it didn't, still a fix possible. You will need to odin flash TWRP, boot into TWRP, repair the filesystem, than flash stock back onto your phone.
Thanks buddy all sorted now
Device Name: Galaxy s6 edge
Android version:5.1.1.
security patch level 2015-11-01
Baseband version: g925fxxs3cok5
kernel version: [email protected] #1
Build number: LMY47X.G925FXXS3COK5
does that look about right guys?
mikecky said:
Device Name: Galaxy s6 edge
Android version:5.1.1.
security patch level 2015-11-01
Baseband version: g925fxxs3cok5
kernel version: [email protected] #1
Build number: LMY47X.G925FXXS3COK5
does that look about right guys?
Click to expand...
Click to collapse
Looks good.
Hello guys .. i bricked my s6 edge SM-925F.
All what i did was to run by odin a recovery .. after that all went wrong.. Can enter only in Download mode.. i put many recovery even stock on..many of them fail but i got 2 wich says Recovery is not seandroid enforcing.
If i try to install by odin stock room i got fail.. i downloaded like 3 official room from samobile.. same .. all fail dunno why..
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
P.S. : on download mode i got SV Rev. Check Fail Devicde : 3 Binary :1
Please anyone can help mee?
I have exactly the same issue as this, and I can't get into recovery. I have tried multiple stock versions all giving me the same error as you stated.
Try to flash only kernel and older TWRP, then try to restore your backup.
If you don't have backup, then you should know that the first "rule" of XDA is ALWAYS BACKUP, actually, it's mantra it's not a rule
Sent from my SM-G925F using Tapatalk
Search for G925FXXU3COI9 UK BTU version. I had same problem and that one worked for me
I had a n8010 with a custom ROM flashed into it and it was operating Android 4.1.2. In order to be able to receive the latest updates and revert to the original ROM (which I did not back up at the time) I tried flashing with Odin 3.12 after booting the tablet into download mode. However, the process failed and the Odin log is as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I tried a second pass and it also failed in the options tab only "Auto Reboot" and "F. Reset Time" were clicked and AP type was ticked for the ROM ending with "tar.md5". I think my tablet is in the state what is called soft brick, how can I recover it and install the default stock ROM?
The device also has an SD card and when I unplug it Odin is stuck at "SetupConnection" step; I think this is an important observation. The Odin mode screen has the following information:
ODIN MODE
PRODUCT MODE: GT-N8010
CURRENT BINARY: Samsung Official ---Yet it still refuses to update so I attempted all of this.
SYSTEM STATUS: Custom
AP SWREV: A2
EDIT: After removing and inserting the SD card Odin was able to perform an installation of the stock OS. I hope it is a clean install and still have no idea why these problems occurred.
Thanks in advance