I have a s7-721u,after updating rom in sd mode device has bricked and it is in qdloader 9008 now.
Is there any solution or a qfill rom for it?
Need help,thanks
I have the exact same problem but it seems no one knows how to fix it
See here and try to retrace the steps with your device's firmware AND emmcswd archive that usually comes bundled with official firmwares.
Related
Hello! I bricked my SURNIA XT1523 after try port miui rom.
My phone don't boot anymore and fastboot not working too
I downloaded RSD Lite and my phone isn't recognize, in QFIL my phone is regnized as: "qualcomm hs usb qdloader 9008 COM3"
I have flash rom to RSDLite but i can't find the same firmware to flash with QFIL.
I see more toturials but all then teach to revive phone with FASTBOOT command but i have the driver installed and the fastboot not working. i don't know that informations you need but i have this problem without solution, help please!!! :crying:
M4rQu1Nh0S said:
Hello! I bricked my SURNIA XT1523 after try port miui rom.
My phone don't boot anymora and fastboot not working too
I downloaded RSD Lite and my phone isn't recognize, in QFIL my phone is regnized as: "qualcomm hs usb qdloader 9008 COM3"
I have flash rom to RSDLite but i can't find the same firmware to flash with QFIL.
I see more toturials but all then teach to revive phone with FASTBOOT command but i have the driver installed and the fastboot not working. i don't know that informations you need but i have this problem without solution, help please!!! :crying:
Click to expand...
Click to collapse
With Qualcomm HS USB QDLoader, you can definitely revive your phone but for that you'll need the stock firmware file. I have a Lenovo A6000 with same SD410 soc. On it, you have to get and flash the .ROW firmware, which can be found easily. But, I don't know where to get the firmware for the MOTO E. Ofcourse, there are these threads on MOTO E 2015 page. But, I don't know if the xml zip files are supported by the QFIL software which you'll need to flash the firmware image.
Please also CHECK THiS LINK. This might help.
It's late...
sasukay said:
With Qualcomm HS USB QDLoader, you can definitely revive your phone but for that you'll need the stock firmware file. I have a Lenovo A6000 with same SD410 soc. On it, you have to get and flash the .ROW firmware, which can be found easily. But, I don't know where to get the firmware for the MOTO E. Ofcourse, there are these threads on MOTO E 2015 page. But, I don't know if the xml zip files are supported by the QFIL software which you'll need to flash the firmware image.
Please also CHECK THiS LINK. This might help.
Click to expand...
Click to collapse
Thanks by try help but this too late. :crying:
I sent my phone to customer support to repair. The surnia is a recent model and is normal a low support at beggin
I can't wait the firmware release for another flash tool and i was been try a great number of tutoriais without result.
I just hope that the cost of repair is not too expensive.. but, thanks by help!
Hello everyone,
after putting my phone in download mode, I flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch ON.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
eagle93 said:
hello everyone,
after putting my phone in download mode, i flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch on.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
Click to expand...
Click to collapse
i have this same problem
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
hai friends please help me.. my v10 is F600L but my friend by mis falshed with h961N that one dual sim and my F600L is single sim after flash no network so I tried to falsh back to F600L but my phone dead now after 90% flash.
only vibrate when i press power button
pc also not detecting anything like qhsusb or nothing
no download mode nothing
please any expert here help me...
hope any guy know about it
thanks in advance
Lg v10 h960a
Hi, I have the same problem, could you fix it? Thank you
I'm fighting with my fiends phone for over 3 days now, same as yours 960A. What i did is, try to heat the CPU up, rly rly high, and then try to turn on/fastboot it. If its not working, put it into freezer, and try to boot it inside a freezer. After 2 days i managed to get to fastboot few times, flashed stock firmware and right now im stuck on bootloop, but that is fixable. Just play around with heat, this phone is bricked anyways so dont be scared to take of heat sink and just blow your hair dryer straight to CPU.
xsoft said:
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Pls share the lg v10 H9012j.img file pls.
I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.
I am using a Zuk Z1 which has lost its GPS functioning so i read around the forums and came to find out that the only way to fix it would be to flash the stock rom (Lenovo_ZUK_Z1_7DF). I was previously on Screwd Rom (Oreo) and thus i tried to get back to the stock rom. I was unable to succeed in my task using QFIL or QDLoader hence i chose the "Flash Stock Rom " in the "All in one Tool".
It put my phone on the other stock rom (CM12.1).
Now all i want to do is to use QDLoader/Qfil to install the stock rom (Lenovo_ZUK_Z1_7DF) So that i can recover my GPS functioning. The problem i m facing is that My phone quickly leaves the Qualcomm HS-USB Mode (which is required for flashing) in 5-7 seconds, thereby stopping my flashing.
Pls help me out with this problem pls.
P.S. I have got ADB Debugging "ON" and got the correct drivers set up for my PC.
Did you got any success? I'm in the same situation with my OnePlus7.
Hello guys.
I bricked my device trying to swap from CN ROM to GLOBAL ROM, my PC is now fully detecting my device as Qualcomm HS-USB QDLoader 9008, now I just need a compatible stock ROM file, but amongst the posts here I couldn't find any .elf or .mbn firmware, only .BIN or .OFP. Could anyone point me in the right direction to where I can download a compatible QSPT/ QFIL firmware for my device?
Thank you!
IISavanTII said:
Hello guys.
I bricked my device trying to swap from CN ROM to GLOBAL ROM, my PC is now fully detecting my device as Qualcomm HS-USB QDLoader 9008, now I just need a compatible stock ROM file, but amongst the posts here I couldn't find any .elf or .mbn firmware, only .BIN or .OFP. Could anyone point me in the right direction to where I can download a compatible QSPT/ QFIL firmware for my device?
Thank you!
Click to expand...
Click to collapse
I literally did the exact same thing 3 days ago. Did you ever get your phone fixed?
there's a post here for realme devices