I was running CM 13 and I opened SuperSU. It asked me if I wanted to update the binary, I clicked on OK and it booted into recovery and installed and rebooted, it continued to reboot for about ten minutes and released that it had bricked. I tried booting into recovery , but my volume buttons were broken. Then I connected the device to my PC. In adb, I tried to run the reboot recovery command. But my device was not detected by my PC. I tried pulling out the volume button and pressing them with a sharp object and tried rebooting to recovery, no luck..
Need help..
Related
So I flashed a new ROM by the Spanish guys at Team Force (great looking ROM), via CWM, and so naturally I got the boot loop problem.
Normally solvable by turning off the phone, booting into recovery and then performing a factory reset, right?
Here's the problem - this appears to be one of the only android cellphones in existence where you CAN'T boot into recovery using the normal power + volume key combinations.
Essentially, I've bricked the phone without actually REALLY bricking it.
Did I miss anything, or does it sound like a quick end of line for this phone?
Edit: Well, if I connect my phone via USB and have ADB running in the background, holding the volume up key during the boot loop does bring up recovery mode.
It seems to me that the installation of said ROM simply doesn't fully complete before it tries to reboot itself, which could be why this is happening.
Hey there, I'm currently possesed a THL 2015, chiense phone, with firmare kitkat 4.4.4, Rooted.
Ok, today i was trying to change my Bootanimation (which i've changed several times already), but i've encountred a huge problem.
My phone has stucked on On/Off loops at the first time after i've changed the bootanimation...
Well i've tried to enter Recovery Mode.. but.. hmm.. how should i put it... My phone got stuck on it aswell..
My phone is looping in Recovery mode (i know that because there is the logo with the "No command thing"),
The device is turning off, then back on every 7~15 seconds after enerting automaticly into Recovery mode..
I've tried every single key pressing on the On/off key and Volume keys.. but in failure.. the Recovery mode won't goes out, and the device still loops.
Okay... now What i've tried also.
I've tried to connect my device into my computer trying to getting a shell trough ADB. but in failure, cause of the device loops in Recovery Mode, adb and the computer won't recongnizing my device.
Ok.. Flashing?
So i've tried to download SP_Flash_tool for flashing into stocked downloaded rom, but also in failure, non of the roms i've downloaded for my Device were recognized in the SP flash tool, (the scatter).
I've downloaded it from several sites in them were this site: needrom/com/download/thl-2015.
Tried every rom, still not recognizing.
Well i've failured in everything i've tried, so im here asking for help.
My main goal is getting a shell for my device, for me deleting the bootanimation i've tried to install.
ok.. i've talked too much..
Thank's for helping.
Hello, I'm new here. I have rooted my new fire 7in 5th gen tablet. I used the flashfire beta app to flash a rom which I found out that the rom had bugs, so I decided to install cm12.1 using the same app, but the app glitch when it started installing the rom meaning it didn't finish and kept installing. I decided to power it down and reboot it back up. It showed the cyanogemod logo booting with animation but nothing booted up. It kept booting like a bootloop. I restarted it multiple times and the same errors keep happening. I tried go into recovery mode by holding the volume up + power button at the same time when i was boot it up. it only went to amazon logo and not recovery. I also plugged in the device to the computer using my factory cable to see if I'm able to enter fastboot mode. It worked, but it wouldn't allow me to flash anything. The tablet greeted me a message saying flash not allow, but the commands were able communicate with fast-boot and cant get it into adb because the boot loop. I had actually enter fastboot mode using commands which worked. Sometimes when i type a different command it said failed remote. Some commands actually worked but I don't what other commands to use to fix it. It has been 10 months since this happened to me. I'm not willing to give up on it because their has to be alternative ways of bypassing these issues. Is their any way you guys can tell me how to fix this? Thank you.
Hey there,
so I wanted to update LineageOS to the latest nightly (1st August) coming from an April nightly. I did it OTA, entered TWRP, installed the update and got stuck in TWRP, which is apparently a known issue with TWRP 3.0.2.0. But I didn't know that, and tried to fix it by installing a backup of CM 13 WITHOUT wiping data, because I did not want to lose my data. Stupid, I know.
I then found a fix to leave TWRP and tried booting into CM 13 but now I'm stuck in a bootloop. It shows the CM logo, then prepares apps, shows the logo, prepares apps, logo, and so on...
I can't enter Download mode or Recovery mode using the keys and adb/fastboot commands don't work while the phone is turned off or booting.
Any ideas what I can do?
Some more info:
It only bootloops when plugged into my pc. When it's unplugged (or plugged in to just power) it stays at "preparing to start". Sometimes it even leaves that screen but then the System UI keeps crashing leaving me with nothing to do but hard reboot. I still can't Recovery or Download mode tho. And whenever I plug it into my PC, it reboots
So you can't get into downloadmode with holding [Vol Up (+)] and plugin the cable into your pc at the same time?
[Edit]: Sorry, [Vol Up] is the right key.
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Have you found any solution
I am looking for a solution facing similar problem
I am looking for a solution facing a similar problem. Any help will be appreciated. I am able to reach fastboot and sun boot as well as recovery command successfully with twrp iso. but twrp is not loading after reboot and also trying to press vol up and power buttons.
chandidas said:
Have you found any solution
Click to expand...
Click to collapse