my Bluetooth headset is connected and music is working fine..but bluetooth calling suddenly stopped working after few days. whenever i'm calling with my headset i and the other person can't hear anything. i checked settings and phone audio is turned on. please help.. thanks
Got same problem
Few days ago earphone stop working. On other phone work's fine.
On my KIW-L21 I can start and stop calling. While I'm calling can hear only noise.
I had the same problem. Huawei support was no help. But I finally wiped my cache partition and that fixed the problem. No need for a factory reset.
1) Turn off your phone, wait a few seconds
2) Hold volume up button and power button until your phone starts
3) select "wipe cache partition", wait for it to complete
4) select "reboot system now"
Aee tou facing the issue on stock or any custom rom?
I had this issue on the stock Marshmallow ROM. I would have to do a restart, then unpair and repair the Bluetooth headset in order to continue making calls with it. It would fail to the point I had to follow this procedure about once per day. Making sure I did a restart before starting my day made it occur much less often. If I didn't restart every 24 hours, the Bluetooth would stop working pretty quickly on the 2nd day.
I have since changed over to LineageOS 14.1 and am now running Nougat 7.1.2. Haven't had the issue return since.
On another note, my Bluetooth mouse also works now, which never worked before. Definitely a better Bluetooth experience. The Bluetooth on the stock ROM from Huawei is just a disaster, plain and simple.
Related
Running ICScrewed 2.0.1 and I've been running into a problem over the last few roms I've flashed where my Bluetooth doesn't auto connect.
I have a Jabra Cruzer 2 bluetooth speaker in my car that I've paired with my phone. Tasker is setup to start a menu system when the bluetooth connection is established....but it never happens. I have to go into the BT menu and press on the Jabra device to make it connect. By default it shows "Paired" so I press it and it changes to "Connected".
I know when I had UnNamed previously it was auto connecting everytime I would jump in my car and hit the connect button on the Jabra. It hasn't worked that way since I've gone away from UnNamed. I even tried going back to it and now it doesn't work.
I've checked the Jabra and there's nothing to the settings so I'm 99% sure it has nothing to do with the device.
Does anyone know of a place to tell it auto connect when detected?
Followup question,
I also can't get phone calls to go over the bluetooth device either. Is there special place to look to make sure calls go over bluetooth by default?
Thanks everyone for your responses.
You may have to re pair the device. Did you restore bt pairings when you changed ROMs? That can cause no end to problems, especially when they are different bases.
I have the same Jabra and it connects every time I press the talk/end button on the unit.
Sent from my SGH-I777 using XDA App
I may have somewhere along the line Titaniumed the BT pairing back. But my most recent flash of ICScrewed was preceded by wiping dalvick, clear cache partition, and wipe before installing full. So I'm not sure how anything would have come over unless there was a folder somewhere with bad data.
Is there a folder I should clear out and pair from scratch?
Hi
I've recently got one of the EU 1/8 Omate Truesmart watches. To start with it was fine, but after realizing I had missed some calls yesterday I realized that the watch made no sounds and the mic wasn't working either when I made some test phone calls. The vibrate does still work. I've changed the Modes in the Audio Profile but that doesn't seem to have made a difference.
Has anyone else had these problems?
I suspect the mic and speaker are in different parts of the watch, so I'm guessing its a software issue rather than something has shaken loose. I tried to work out how to reset the watch, but so far I haven't worked out how to do that (I haven't patched it yet, so it still has the original version of the firmware etc).
Thanks for any assistance
Somehow I managed to get the sound and mic working again . The last thing I was trying was to turn the watch off and on repeatedly, pressing or holding the two buttons down while it booted. One of the other posts suggested that I could get to a menu to reset the watch this way. Whilst I never saw a menu, on one occasion it did take longer to boot than normal (a few extra seconds) so I may have selected an option with out realising.
I've been reading here for months waiting for my TS to arrive and today it has!
I quickly found that all sound and mic was not working and my heart sank. But reading this question and the poster's own reply, and a hint from elsewhere, I turned off "fast boot" in the accessibility menu, shut down and restarted, and hey presto, sound input and output works fine. The "fast boot off" setting seems to be required in order to make the device really reboot.
Many, many thanks to all here who have been contributing to the knowledge base on this device. Hopefully I can now contribute, if only from the point of view of a non-expert man-in-the-street end user, from time to time.
Hello Everyone.
A recent problem, no new software, no updates, I've done a search, both here and on the internet, no solution I can find;
zte zmax, z970 metro pcs, 4.4.4 no root
Started a few days ago, when using bluetooth to make a call, the call goes through, bluetooth stays on, but the phone defaults to phone mic and speaker
I know bluetooth is still on as I can still end the call through bluetooth
To get the bluetooth re-engaged while on the call, I have to toggle in the phone applet, bluetooth icon to speaker on, and then back to bluetooth.
I think this started with a google update, but I did go back to the stock app and it didn't solve the problem
When I go into safe mode bluetooth works as it should.
I've uninstalled the only program that accesses bluetooth settings, (which was torque).
It just feels like this is a phone setting and not a glitch, I can hear the phone actually turn off the microphone. I've cleared the cache of all data, and I tried clearing the cache of bluetooth.
Hope someone can steer me in the right direction, thanks in advance
surprised how little support this forum now gives, I see other blue tooth problems without one post in response.
Anyway, I figured if my post was anything like most people with problems, I wouldn't get anyone offering ideas so I did a factory reset.
For anyone else, if you come up with a solution, go ahead and post for other peeps, this is a common problem around the internet but nobody has an answer yet
I rooted my phone a month or two ago using odin and TWRP recovery, and I also flashed a new rom (Resurrection Remix 6.0.1). I have since had constant issues with my bluetooth headphones, which are the only bluetooth device i use with this phone. I have searched online and looked at many forums but I couldn't find very much information to help me. My issue is that there are random times where the audio from my headphones gets very choppy and unintelligible, kind of like static. It only occurs for a few seconds though, then everything resumes perfectly fine. Another big issue I have is that when I wake the screen, the same audio choppyness will occur and it will usually stay like that on the lockscreen, and when I unlock my phone, it goes away after a bit. My phone will also randomly show the message "Bluetooth messenger has stopped working" sometimes, usually after my phone is unlocked after a while of not using it. I have turned off my phone's doze function, cleared the cache many times, and factory reset it to no avail. Hope you guys can help.
Hi, is any of you guys with the new October update and One UI 2.5 interface have an issue answering the phone calls?
I face the following:
Phone is ringing, I answer, I can hear the other person but I'm not heared. If I enable the speaker and then turn back to headset by disable it, the microphone is working and I can be heared.
The issue is manifesting only when the phone is locked and I receive an call, when the phone is unlocked and I'm calling somebody, everything is normal.
In the normal tests, the microphone is working normaly (for example voice recording).
Sent from my SM-G965F using Tapatalk
Hello, I have the same problem after October update. What i figure from now is that is manifesting only when i have the phone sounds on mute. It's working fine with sounds on or on "vibrations" .
And I'm "happy" that is not a problem with my phone, but only a software bug...
I have this problem too. Is there a solution?
I've made an reset to factory settings and problem was solved. I'll see in the future if reappears.
Sent from my SM-G965F using Tapatalk
I don't want to perform a factory reset, what about "Maintenance Boot Mode" ? Or "Safe mode boot" - there are some guides on the internet about Galaxy S9 Plus microphone won’t work during calls issue, or Wipe the cache partition?
But Maintenance Boot Mode it seems that is not working anymore - Press and hold the Power + Volume Down buttons for approximately 10 seconds - only reboot the phone...
robotila999 said:
I don't want to perform a factory reset, what about "Maintenance Boot Mode" ? Or "Safe mode boot" - there are some guides on the internet about Galaxy S9 Plus microphone won’t work during calls issue, or Wipe the cache partition?
But Maintenance Boot Mode it seems that is not working anymore - Press and hold the Power + Volume Down buttons for approximately 10 seconds - only reboot the phone...
Click to expand...
Click to collapse
Your better off, taken it to a service center....
Thank you, I will see. Service centers take days only to make a factory reset...