Hello!
I have a bricked phone. When I got him, he was in a state "loaded to the screensaver and stop".
I decided to flash him using recovery (carliv touch recovery 2.2). Thanks to recovery I copied all the files from phone. But all my attempts of flashing were unsuccesful - I've got the errors while recovery did an unzipping.
That because I decided to use SP FlashTool. But I've forever got the same error 5069.
I notice, that I can format my phone and download the preloader. But it's all what I can.
What I tried (what i remember):
to load without and with battery;
to put a battery after beginning of flashing;
to flash with pushed power, volume control buttons - all together and alone
to use another system, cable and computer (2 cables and computers, windows and ubuntu);
to flash different versions (from off site);
to use different versions of sp flashtool
Also I found a video, where propose to do the backup of working phone (prestigio 3400) by MTK droid tool and try to flash this.
I would be very grateful if you help me. Thanks
Related
I recently bricked my RCA tablet while modifying the boot file in the device's system folder. It was stuck in a bootloop so I followed the directions in a forum to use SP Flash tool and flash it to reinstall the stock rom. While following those instructions to the T, it seems that my device will now no longer boot, won't charge, and is not recognized by my computer (all the symptoms of a hard-brick as I am told). I followed a brief fix explained by a self-help forum within hovatek to use the SP Flash tool to only flash the preloader file just to try and get the device to boot again, but not even that worked. I would like to know what else there is I can do to fix it or if there's no other option but to send it back to the factory. I am using a RCT6773W22 Tablet w/ V38-V1.8.0 An error I received while using SP Flash tool the first time right before my tablet became hard-bricked was Error 5007.
Hi i bought a umi z not long ago and today i wanted to install twrp thanks to this link
Then i wanted to root it thanks to super su.
So I install SPFlash tool on my computer and downloaded the recovery twrp on my phone. It worked great until I wanted to reboot into android. And than !!!! problem. I'm in bootloop. Nothing to do. The people who did it also said they were all satisfied. I need help pleease. After several unsuccessful tries I find myself without Custom Recovery and without system.
HELP ME:crying::crying::crying::crying:
You can flash stock ROM again with SP flashtool.
Shut down phone. DL stock Rom. Extract this and flash whit SP tool. Works. Great.
First switch off your phone, staying the power button more than 10 seconds (release as soon as the bootanimation deseappears).
Then on your PC launch SP flash tool and use the scatter file of the last version ( https://forum.xda-developers.com/umi-z/development/compilation-original-roms-t3549971 ), start download, connect phone to PC and all is ok ! But factory reset...
Hello there. I have an Elephone P9000 Lite, which required a re-flash. Fair enough. After I formatted everything then flashed the stock ROM... I tried booting it up, but the boot animation won't show up, instead, it's all just a black screen. It went on like that for 10 minutes, before I decided to stop trying. It got bricked. Now, I decided to try and flash CM13 (I found a ROM on this forum), but I can't flash it using SP Flash Tool (what I used to flash stock) because it's an .img file, so it doesn't have a scatter. I came to the conclusion that I can use:
a) Recovery, which I can't access due to the device being bricked
or
b) ADB, which requires USB debugging to be enabled, but I can't enable it due to my device being bricked.
Can anyone help me?
(I have quite some experience with flashing and stuff, but I have no idea how to flash .img using a PC without having to access the phone's OS)
Hey friends! :fingers-crossed:
I have lenovo a3500hv tablet. I tried to install a custom rom with twrp, but it failed. After the process of flashing I just checked the recovery menu and it was working. I turned off the device and after few hours, I tried a lot to turn it on, but I failed (There is no screen light, no vibrate or any sign). So, Searched a lot and I found that I should flash the original rom to survive my tablet. When I try to connect tablet to PC, my PC makes sound and I can see my device name in the Device Manager; Also, I have the MTK drivers installed. So, I load the scatter file and try to flash with SP Flash Tool and it's shows me the name of my tablet, but when I start to flash, SP Flash Tool does not start the flash process. I used a lot ways to connect my tablet like Volume Down + Power, Volume Up Power and ...
Please help me guys
Hello all good souls over here.
Could you please help me out with flashing back the original stock ROM to Mediatek MT6737M phone?
UMAX VisionBook P50 LTE, Mediatek MT6737M, 2GB RAM, 16GB internal memory.
What happened:
Before I was trying Oukitel P5 Pro ROM as well as Lineage OS and flashing with SP Flash Tool was working just perfectly.
But then I tried to flash Oukitel P5 Pro Andorid 7 stock ROM. (Oukitel P5 Pro and UMAX VisionBook P50 LTE are completely the same phones. Just different branding)
(And from now on I am not sure if I remember correctly)
When I loaded in scatter file, SP Flash Tool said something about something .... and recommended to do "Format all + Download" and I have done so.
Clicked on the Download button, flashing started instntly when I connected the phone while holding Volume - button.
Flashing stopped in maybe one second with the error which I do not remember as I closed the error window way too quickly. :-(
Later on I noticed that the preloader file is different in this Android 7 ROM then Android 6 ROM.
What is the current behavior:
When the phone is connected (with the battery inside) to the computer phone keeps connecting and disconnecting (appearing in Device manager as Mediatek USB Port) if I click Download button it starts doing "something" instantly which stops at Download DA 100% and after the while ERROR: S_FT_ENABLE_DRAM_FAIL (4032) pop up windows shows up.
The same error happens if I try to Format it and all other combinations in Download tab (Firmware upgrade, Format All + Download)
If I plug in the phone to the computer while pressing Volume - button phone will show up in the Device manager after about 20 seconds.
(Just to note - When the phone was working OK, I started flashing instantly when I plug the phone into the computer while pressing the Volume - button
So that kind of leads me that if nothing will show up in Device manager when I plug the phone to the computer while pressing Volume - button, then there might be the issue with the phone not switching into META mode? Not sure, just what I have read. But I cannot move any forward at this point.)
What I have tried:
- Correct stock ROM and Oukitel stock ROM (both Android 6 and both I was able to flash correctly and was able to boot them, until I tried Android 7 ROM)
- various SP Flash Tools 5.xxxx (and 3.xxxx too, but version 3 does not accept scatter file at all)
- USBDeview and removing all related USB devices from Windows and re-install them back again.
- Various VCOM drivers I have found on the Internet
- Flashing with SP Flash Tools on Linux (ends up with the exact same result - 4032)
- I tried shorting test point to ground on the phone main board. (The result was the same like when I plug the phone in while holding the Volume - button - Phone would not show up in Device manager for about 20 seconds)
- Tried flashing with the battery inside and outside the phone. (When the battery is outside flashing would not start, but the error about incorrect chip type will show up)
- Read many articles about this error all over the Internet
Do any of you think there is a change to bring the phone back to live? Or do you know what actually might happen to the phone? It does not seems to be completele bricked, but I cannot say in what state the phone is.
Thank you very much for your help and have a nice day.
Hi. I need this rom for this phone. I have umax p50 lte too . Please give me link if you can. Thx
@oukitel654
Look inside here:
Common SP Flash Tools error and Solutions - ROM-Provider
Common SP Flash Tools error and Solutions: Hello guys if you are facing a SP Flash tools error code issue then this page is for you where we share solutions for for almost all SP Flash tools error. Common SP Flash Tools error Code: Error 5054, 4032, 8038, 5069, 4001, 4008, 3149, 3168, 2004, 1013, …
romprovider.com