I have unrooted my note 3 lite by using Kingroot, after which my wireless updater app stopped working, I then unrooted my device by disabling root configuration in the kingroot app, after that I uninstalled kingroot, then the wireless updater started working, I checked for update and it showed an update of 14.1 MB I downloaded it but while installing it in the recovery mode it shows error, so please tell me what to do and how to update my device using OTA.
Related
Rooting your Huawei Honor Holly
Things that you need:
1) USB Cable
2) Drivers installed
3) USB Debugging enabled
4) IROOT Android PC Software
Download IROOT PC Software (Google can find you the link)
Connect your phone with USB debugging enabled and run IROOT software and follow the on screen instructions to get your phone rooted.
Once everything is complete download the latest version of SuperSU (Chainfire) from google play store and install as usual.
Finally uninstall all the chinese softwares that were installed through IROOT.
That's it your Huawei Honor Holly (HOL-U19) is rooted.
Method 2: Install the attached apk and have root.
I am in noway responsible for bricking your device, I am not a developer just found this method on google and it works and all credit goes to the original poster.
root failed
Bro..I have done that what u have said...but rather than root my phone it installed 3apps..and it shows root failed in PC app
a.jameelrahman said:
Bro..I have done that what u have said...but rather than root my phone it installed 3apps..and it shows root failed in PC app
Click to expand...
Click to collapse
Which method did you use apk or pc method
PC Method works fine
i tried both pc as well as apk method...
Kindly explain how to root through using PC method...I explain the process which resulted in failed...firstly I connect the mobile with debugging option enabled...then I open the IRoot,which I already installed the latest one in my PC....it shows hold u19 is connected..then I click the root button...after a while my mobile reboot and the PC app I.e.,Iroot shows root failed....even I use apk method it also shows root failed.usepc app.....
a.jameelrahman said:
Kindly explain how to root through using PC method...I explain the process which resulted in failed...firstly I connect the mobile with debugging option enabled...then I open the IRoot,which I already installed the latest one in my PC....it shows hold u19 is connected..then I click the root button...after a while my mobile reboot and the PC app I.e.,Iroot shows root failed....even I use apk method it also shows root failed.usepc app.....
Click to expand...
Click to collapse
Install Rootchecker from Google Play to check if the phone is rooted. Were there any chinese softwares installed through IRoot
i tried
Using root checker basic apk,I check....but it shows No root permission.....and while rooting using Iroot PC method 2Chinese software installed
Good
use this..
http://forum.xda-developers.com/chef-central/android/root-honor-holly-hol-u19-pc-t3110745
I've been using Galaxy S5 for a while now but today I tried installing Lollipop update but it failed. I've never rooted my phone but when I try installing Lollipop update it says "The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Samsung Kies on your PC, or visit our customer service center". Any way how to fix it and I checked root access from Root Checker it says "Sorry! Root access has not properly installed on this device." I don't know what to do I really want the Lollipop update.
So I scoured this website and Google search to find the answer to my dilemma but no luck. Here's what I have going on. I recently got this tablet for 99¢ from AT&T. It was unbearably slow so I decided to root it so I could get rid of some of the bloatware. Used Kingroot to aquire root. That went fine. Next I wanted to install SuperSU. That also went fine. Used root checker app and everything worked great. Root access with SuperSu. Then I needed to update the binaries so I did that and it was successful. Now I know I was supposed to uninstall the Kingroot and associated installs that came with it however, after the binaries were updated and before I had a chance to remove them, the tablet rebooted. When it started up, the LG screen came on as usual and the the AT&T ball screen came on. The ball rotated about 2 times and then froze. I rebooted a few more times and the same result. I don't know if this issue was caused by me not uninstalling the Kingroot stuff. I tried a factory reset but that doesn't help either. I can get it into download mode but I can never get the USB mtp driver to download so it won't recognize it on my Windows 7 desktop. Even if it would recognize it, I have no firmware to use with it. I tried using the LG flashtool, LG mobile support tool, LG bridge etc. I am not a noob as I have rooted many devices and am familiar with installing custom roms through recovery or using fastest and command prompt. If I could somehow find the stock firmware for this somewhere I might be able to get it up and running again. I just want to know what my options are and if there is anything that I can do. Any advice will be greatly appreciated. Thanks in advance.
I used Kingroot (desktop) to root my Kyocera-E4710 (DuraXE).
Restarted it and everything was fine, uninstalled it with file manager and it lost root (as expected), reinstalled the Kingroot apk and it got back root.
Did a factory reset and it lost root (as expected), reinstalled Kingroot and it got back root.
Then I replaced Kinguser with SuperSU (got the script from this site) restarted and it worked and everything was OK.
Then I did a backup of packageInstaller.apk and uninstalled it, then I tried installing/uninstalling other apps and it didn't go (as expected).
Then I did a full un-root with SuperSu and it didn't uninstall due to the lack of the packageInstaller - but it lost root (as expected).
Then I did a factory reset and it's stuck (it says Kyocera)!
This phone has no download mode - it just had the safe mode (power+down+menu) option but that doesn't boot either, can you please help???
Did you ever get this resolved? I'm trying to get the wifi hotspot to work with t-mobile, but at&t has software restricting the use.
I sent it in to them and they un-bricked it [or was it a new one?].
Then I rooted it again with Kingroot and then I replaced Kinguser with SuperSU and did what I needed.
Then I un-rooted it and it works fine.
However this time around I didn't bother with Package Manager - and I never tried to factory reset it again.
AKA-AK said:
I sent it in to them and they un-bricked it [or was it a new one?].
Then I rooted it again with Kingroot and then I replaced Kinguser with SuperSU and did what I needed.
Then I un-rooted it and it works fine.
However this time around I didn't bother with Package Manager - and I never tried to factory reset it again.
Click to expand...
Click to collapse
I just used Kingroot. Still can't get the hotspot to work. I'll give SuperSU a try. Did you get tethering to work?
Thanks!
EDIT - - I used the windows app for kingroot and can't get this dumb thing to install an apk. I'm hoping someone has some guesses on how to get around at&t's hold on using tethering. I'm not on their network and I can't understand why they feel the need to destroy hardware with software.
cizinec said:
I just used Kingroot. Still can't get the hotspot to work. I'll give SuperSU a try. Did you get tethering to work?
Thanks!
EDIT - - I used the windows app for kingroot and can't get this dumb thing to install an apk. I'm hoping someone has some guesses on how to get around at&t's hold on using tethering. I'm not on their network and I can't understand why they feel the need to destroy hardware with software.
Click to expand...
Click to collapse
Hey just a question for you guys, in trying to use the e4710 with t mobile myself but network keeps stopping it and disconnecting? Just wondering if you were expecting that too with it unlocked and using at mobile sim. Thanks for any info
anybody knows what is he talking about?
this a keypad phone...root? install apk?
i have the same problem - cant use wifi tethering on non-att network...
if i had android - then it is easy to solve, but how to do it on the keypad heandset?
how did you root this phone?
Hey OP, what were you trying to do with root? I've got a DuraXE coming in the mail and, like many others, am hoping to open up tethering for non-AT&T providers. I imagine it can't be as easy as disabling TetheringProvision.apk. There's not much data on this phone, though OP appears to have been successful; another thread had kingroot fail for someone. I believe the bootloader is locked.
If we can turn on USB debugging, I can try to remove TetheringProvision.apk and install CWM Tether if needed. If root is needed, my plan is to try to use Kingroot. Of course, I am assuming that you can turn on USB debugging mode to use Kingroot here. Maybe root won't be needed, though I somehow doubt that.
Kyocera has their kernels and drivers availible for download from their site. One thing that's interesting is that the DuraXE E4710 is listed under the drivers page as "DuraForce XE 4710" and shares the same drivers as the DuraForce Pro, their latest smartphone. I'm hoping that information about DuraForce Pro modding may have some application to the DuraXE. We'll see what happens.
Kyocera duraxe E4710 root and tether
Enable developer option
"click several times on "Build" id field under settings.
Enable unknown sources under security ettings
Use kingroot to connect.
You may need the Kyocera USB drivers available from vendor webpage support.
Version 3.5 of windows kingroot failed to root for me. (version available on XDA)
(And avira had a panic attack over installation of newer version kingroot windows pc app)
Gave up - since uncertain how to fix the locked in AT&T network tethering and hotspot issue even after rooting the phone...
Hello
I have a Motorola Moto g 2014 and its running marshmallow 6.0 .when I installed viper4android it asked me to install drivers and when I clicked ok it said driver installation failed : the busybox installation found on your device does not work or your phone is not rooted (I have busybox pro version and all drivers are installed and even my phone is rooted and bootloader unlocked). I tried many things like reinstalling the apk downloading zips but nothing worked ......need help to fix that issue because even I want to boost my phone speakers .Hopefully I will soon get help
Thank you
suyash bagad said:
Hello
I have a Motorola Moto g 2014 and its running marshmallow 6.0 .when I installed viper4android it asked me to install drivers and when I clicked ok it said driver installation failed : the busybox installation found on your device does not work or your phone is not rooted (I have busybox pro version and all drivers are installed and even my phone is rooted and bootloader unlocked). I tried many things like reinstalling the apk downloading zips but nothing worked ......need help to fix that issue because even I want to boost my phone speakers .Hopefully I will soon get help
Thank you
Click to expand...
Click to collapse
First of all honey, logs plz. We need to see specifically what went wrong (a description from a human just doesn't cut it). There are plenty of guides on the beautiful internet, but here's what I'd do:
>Download the app catlog from the play store.
>Get the error message
>Open catlog and look for a red "F" during the timepoint of when the error occurred.
>Long press and copy, then paste into something like pastebin.com
>Gimme link
>???
>Profit
Try clearing cache, both app and device cache. Also check for su binaries if they need update.
Good luck
It is displaying this
The thing is its showing error- "Driver installation failed, the busybox found on your device doesn't work. this usually means you installed the wrong or broken busybox, V4A needs stericson busybox to work. If you are sure about having installed the proper busybox, then please confirm your device has been properly rooted."