Ok, I just caught my dog chewing on my tablet he cracked the screen pretty good, I can't find the screen specific to my model which is the Verizon SGP561, I can't seem to find that specific screen. What I'm wondering is how close the 521, 541, and 551 are to mine will they fit? Will all the cables line up? I haven't taken it apart yet because it's still functional and I don't want to take the risk of ruining it before I have the parts to make it good again. I'm sure I can change it as I have done several screen swaps before without any issues.
Related
Hey,
I have an ATT tilt 2, running an Energy rom. It worked great till 3 days ago, when I noticed a "light" spot on the screen (about 50mm in diameter) , like something had scratched some film away.
I disregarded it as just that, a scratch, but the next day the screen was completely unresponsive. If I press on the spot, it "fills" with a darker color, I am guessing this is the digitizer pressing into the LCD screen, the screen then becomes responsive for a few seconds (Just long enough for me to reset my alarms!), but not always.
I have ready through these forums and online, and it sounds like I damaged something, digitizer or LCD, but I am not sure which I need to replace.
Also, I have read that replacing just one or the other can be problematic as they need to be aligned just so and with no particles in between, but I cannot find any Digitizer+LCD assemblies online for Tilt2...
So I guess what I am looking for is:
Based on above, do I need just Digitizer or LCD or Both?
Can you point me in the direction of a good vendor? The ones I have found are either selling just tmobile or generic replacements (which if I understand are incompatible with the att version cause of camera placement?) or are very unclear which version they are selling and do not clarify it in emails...
Thanks XDA Forums, keep up the good work!
gryswynd said:
Hey,
I have an ATT tilt 2, running an Energy rom. It worked great till 3 days ago, when I noticed a "light" spot on the screen (about 50mm in diameter) , like something had scratched some film away.
I disregarded it as just that, a scratch, but the next day the screen was completely unresponsive. If I press on the spot, it "fills" with a darker color, I am guessing this is the digitizer pressing into the LCD screen, the screen then becomes responsive for a few seconds (Just long enough for me to reset my alarms!), but not always.
I have ready through these forums and online, and it sounds like I damaged something, digitizer or LCD, but I am not sure which I need to replace.
Also, I have read that replacing just one or the other can be problematic as they need to be aligned just so and with no particles in between, but I cannot find any Digitizer+LCD assemblies online for Tilt2...
So I guess what I am looking for is:
Based on above, do I need just Digitizer or LCD or Both?
Can you point me in the direction of a good vendor? The ones I have found are either selling just tmobile or generic replacements (which if I understand are incompatible with the att version cause of camera placement?) or are very unclear which version they are selling and do not clarify it in emails...
Thanks XDA Forums, keep up the good work!
Click to expand...
Click to collapse
Do You Have A Screen Protector On Your Phone?
@ Doo Doo
Nope, deluded myself into thinking I was careful enough to not need one... that mistake won't happen again ><
gryswynd said:
@ Doo Doo
Nope, deluded myself into thinking I was careful enough to not need one... that mistake won't happen again ><
Click to expand...
Click to collapse
If it's under warranty, do an exchange. That would be the easiest/cheapest option. HTC provides a 15 month warranty normally. Going through your carrier would be a better option, however, as they usually just swap out the headset. If you have no warranty, then just search eBay or Google for the digitizer and LCD. They normally come together. Based on your description of the problem, you'll need both anyhow. Some come with instructions, and some don't. YouTube has a few videos detailing the replacement, though.
I have had a very similar problem on two Tilt 2s now. Looks like the glue leaks out of the side of the plastic over the lcd. Both phones did this on the right side of the screen.
Just in case anyone turns this up in a search like I did and can't swap the phone thru their carrier....
Global Parts Direct sells the ATT versions of these, though the LCD was out of stock at the time of this posting. (I'm too much a newb to post a direct link.)
I just had the same thing happen to me and I was able to swap the phone out with AT&T.
Oddly enough, the bubble wasn't there when I called AT&T but showed up the next day. My screen was unresponsive, called, went through a ton of questions but I had gone through this before with a couple of Fuze phones.
One thing I noticed before this happened which appears to be symptomatic before the phone becomes unresponsive is a large rectangle appears on the phone's LCD. It doesn't obstruct the viewing or anything I have just noticed that it has been on all my phones that have had trouble with the LCD/digitizer.
Has anyone else noticed this?
This is my second G Tablet from Woot.
The first came with a bad pixel that I was intending to live with and try to correct. It went from one bad pixel to a whole line of green pixels across the screen and without rooting and flashing a different rom to get a program that actually would load on the G Tablet I gave up and RMA'd it. Pretty amazing service, shipped mine before the return arrived and no shipping either way.
Now my second G Tablet. Plugged it in and charged until the green light came on and booted it, anxious to get all of my apps reloaded. Immediately noticed that there is an outline about half an inch in from the screen edges all the way around the screen, it looks like a puddle on the screen and a lot like burn in on my Plasma TV. I honestly don't want to roll the dice again and get a new one, but I don't know if I should be concerned about the longevity of the product being less with this issue. Most apps you can't see it and it doesn't bother me, I just don't want to have it die on me a few months down the road and not have the option to return it.
I hope there isn't another thread about this specific screen issue, I couldn't find it and any advice would be great.
Try 'Pixel Fixer' from Market.
Also: LCD burn-in, image persistence fixed!
Are you sure thats not the dual layer screen protector that was shipped on earlier units ? perhaps woot got a punch of old stock.
Also might be some trapped humidity from transit (moving between indoor/outdoors) I would run it on highest brightness for a couple of days if that doesn't fix it I would exchange.
Not sure if it is the dual layer screen protector or not.
Being that it is a G-Tablet we don't have access to the true android market without rooting and running a different ROM, which I haven't decided against, but if I am going to be RMAing it i don't want to hack it and take a chance they refuse to replace it. It isn't bothersome, just more concerned about it effecting the longevity of the tab.
Thanks for the replies.
just download the apk of google.
if the tab is still covered by the manufacture warranty then make them fix it. if they cant fix it they will replace it for you then.
Hello, one of my Android phone (not present on xda) got its LCD damaged apparently. Strange cause i don't remember hearting it ever, and it's supposed to have last gorilla glass.. Anyways, there are like very tiny vertical invisible lines which makes text & everything looks pixelated.
This still let you use the phone, just can't read small text. But after ~20' with screen on (any use) one side + other parts of it while really get fuc*** up more & more. Turning screen off & then on just after will make issue go.. Until next ~20' use.
If i push a little hard on a specific place, then lines will comes and go, once again after on/off. Sometimes they'll stay for a while, listing "ghosting" (or maybe it's not that word?). Any ways to "repair" this without disassembly?
goja said:
Hello, one of my Android phone (not present on xda) got its LCD damaged apparently. Strange cause i don't remember hearting it ever, and it's supposed to have last gorilla glass.. Anyways, there are like very tiny vertical invisible lines which makes text & everything looks pixelated.
This still let you use the phone, just can't read small text. But after ~20' with screen on (any use) one side + other parts of it while really get fuc*** up more & more. Turning screen off & then on just after will make issue go.. Until next ~20' use.
If i push a little hard on a specific place, then lines will comes and go, once again after on/off. Sometimes they'll stay for a while, listing "ghosting" (or maybe it's not that word?). Any ways to "repair" this without disassembly?
Click to expand...
Click to collapse
Not likely without dis-assembly.
Nothing to be done about that without replacing the LCD. Gorilla glass has nothing to do with the LCD, for future reference. The Gorilla glass is only for the top glass.
I know that of course.. What i meant is : how could the LCD be damaged this way if 1/ i'm cautious 2/ it has gorilla glass.
Could this be a bad LCD that started dying only after days of being ON? I'm planning on getting same phone but i'm worried..
goja said:
I know that of course.. What i meant is : how could the LCD be damaged this way if 1/ i'm cautious 2/ it has gorilla glass.
Could this be a bad LCD that started dying only after days of being ON? I'm planning on getting same phone but i'm worried..
Click to expand...
Click to collapse
Just depends on the phone. Nowadays many of the phones are so focused on being slim with tiny bezels that it doesn't take much to break the LCD. I've known people that broke their phone just from being in the front pocket. Never dropped or hit anything, etc. I own a little repair shop and have seen it more than once and have read about others online with similar issues. And sometimes parts just go bad. Just like any other tech based thing.
I see.. Ayways, as said i can still use it, things will just get bad after a moment, i'll just turn off/on and all's gone.
Will it goes on like this forever? I mean, unless accident happens, it won't get worse? Better either i guess..?
About six months ago, I decided (foolishly) to try my S5's water resistance by taking it into the pool and taking some underwater pics and videos of my kids. They turned out great. My phone, however, was not happy. I didn't notice it until about 15 minutes after I took it out of the water. I turned it off, removed the battery, let it dry out for a few days, etc.
After that, it seemed to work again, with a few small problems. The first was that it started shutting down all my apps because it thought it was overheating. I installed an app that monitored the temp, and the numbers it was reporting were obviously wrong (way too high). The second problem is that it would no longer charge. It would either warn me that the battery was too hot, or too cold, to charge.
After some googling, it sounded like the problem might be the USB charging port daughterboard that was the problem. I took a look at the inside, and it did look like that was the only part that got wet. So I bought a new daughterboard and replaced it. I ended up destroying my screen in the process, and only just now was able to afford a new one, hence the six-month lag time.
So I finally have my phone back with a new daughterboard and new screen..... and I'm still seeing the temperature issues
Is there any way in the software to install a "hack" or anything to tell it to ignore those warnings, so that I can actually charge my battery and stop the OS from shutting down all my apps constantly? Could the problem be somewhere else besides the daughterboard? I'm really hoping that my phone isn't just dead, is all
If the back cover and/or usb cover were not securely in place when you took the device underwater, then something other than the usb port is most certainly the problem. That, or you had the phone under water for too long. The S5 is water-resistant, not water-proof. I think IP67 rating is less than 3 meters for less than 30 minutes exposure, or something. When you had it apart, did you look at the board? If you didn't, I think you can remove most of the board pieces from the back. Them them out, inspect them for oxidation, and give them a cleaning with a gentle toothbrush and rubbing alcohol. If you put it back together and you still get problems, there's nothing else you can do to fix it. It might be possible to make the hack you want, but I'm not aware of anyone having made one. Maybe you'd have to find someone who could do it for you, or learn yourself.
I also exposed my phone to water, but the microphone went out. That part is not shielded against water for obvious reasons. I guess Samsung expected the mic to handle more than just a little exposure. But mine failed. So I just warrantied it. None of my water stickers were set off. For you, I'd recommend just getting a new phone if you're with T-Mobile. $0 down on something newer. If you really love the S5, maybe just pay the insurance deductible.
I used to actually fix phones for a living, but I never do just glass on Galaxy phones bc IMO it's just not worth doing. So I would've replaced my own usb port/mic if it didn't require removing the glass.
I wouldn't recommend trying a free warranty even if your water sensors are white, because they'll probably be able to tell the screen was replaced... if they check. Will they? I dunno.
I'd sell you my new warranty but you've already invested a lot in to an aging phone, so I think it's better to cut your losses. I think I have around 300-400 left on it. It'll be unlocked and come with a case and glass screen protector, but it's still a lot on top of everything else.
LucentPhoenix said:
It sounded like the problem might be the USB charging port daughterboard that was the problem. I took a look at the inside, and it did look like that was the only part that got wet.
Click to expand...
Click to collapse
I know for a fact that in the S4 the daughterboard with the USB also has this battery temperature sensor in it because this was a repair I performed many times. Just change the board and the phone will charge and function correctly again.
I, however, have NO idea if it's the same on the S5. And apparently not, judging by what you experienced. I'm sorry you had to go through that and I know how much you had to spend on a screen. That sucks.
Good Luck!
Few days ago while at work my knock on spontaneously decided to stop working. Did some searching around, and during the process noticed my menu bar not coming down like it should, it was jittery on the way down. More searching, and stumbled across a BUNCH of internet talk about dead stripes across the upper portion of the screen in the digitizer. Sure enough, go into the notepad and drawing pen and there's a decent sized strip from side to side that's completely dead. Bummer. No reason at all either.
So, just got out of Verizon with my new G4. Going to take some adjusting because I absolutely adored the G2, but didn't want to take a chance on purchasing a new screen/digitizer or a refurb phone all together. Best phone I've ever had, and I'm going to miss it for sure.
Fastbird said:
Few days ago while at work my knock on spontaneously decided to stop working. Did some searching around, and during the process noticed my menu bar not coming down like it should, it was jittery on the way down. More searching, and stumbled across a BUNCH of internet talk about dead stripes across the upper portion of the screen in the digitizer. Sure enough, go into the notepad and drawing pen and there's a decent sized strip from side to side that's completely dead. Bummer. No reason at all either.
So, just got out of Verizon with my new G4. Going to take some adjusting because I absolutely adored the G2, but didn't want to take a chance on purchasing a new screen/digitizer or a refurb phone all together. Best phone I've ever had, and I'm going to miss it for sure.
Click to expand...
Click to collapse
Well that sucks for you Fastbird but life has many turns and I guess we can't do much for it all those turns, so Goodluck with your new G4 and don't forget to buy a case for it to keep it protected :good: Goodbye, maybe I'll see ya again later somewhere here on XDA.:highfive: