Related
My RN3 having officialy unlocked bootloader.When i update incremental OTA (MIUI 8 Global Beta 6.8.11 to 6.8.24) through TWRP, device stucked at Mi Logo (boot loop).Then i Flash Fastboot rom of MIUI 8 Global Beta 6.8.24 through MiFlash Tool.Finally Device is working but while flashing it removes root access and bootloader again LOCKED again.
While proceeding with MiUnlock it show's following errors
Your device isn't supported by Mi Unlock.
And while applying again on mi unlock page it shows following error
Sorry your application has been rejected
itzsarath said:
My RN3 having officialy unlocked bootloader.When i update incremental OTA (MIUI 8 Global Beta 6.8.11 to 6.8.24) through TWRP, device stucked at Mi Logo (boot loop).Then i Flash Fastboot rom of MIUI 8 Global Beta 6.8.24 through MiFlash Tool.Finally Device is working but while flashing it removes root access and bootloader again LOCKED again.
While proceeding with MiUnlock it show's following errors
Your device isn't supported by Mi Unlock.
And while applying again on mi unlock page it shows following error
Sorry your application has been rejected
Click to expand...
Click to collapse
Try unlocking boot loader unofficially
[email protected] said:
Try unlocking boot loader unofficially
Click to expand...
Click to collapse
How?
Procedure Please
itzsarath said:
How?
Procedure Please
Click to expand...
Click to collapse
log out from existing mi account and create a new one. you can unlock via new one.
dont delete existing account
itzsarath said:
How?
Procedure Please
Click to expand...
Click to collapse
This could be helpful
Give a thumbs up if you found it useful
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
----------------------------------------------------------------------------
Now if you want to install any other ROM like cm13
Procedure for ROM installation
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
Official method is worst. Its not like Motorola who gives unlock code within a min.
Try unofficial above method
Do we still need to flash modified Boot.img for first time flashing TWRP ?
http://forum.xda-developers.com/red...official-twrp-3-0-2-0-recovery-redmi-t3352966
Thanks
[email protected] said:
This could be helpful
Give a thumbs up if you found it useful
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
----------------------------------------------------------------------------
Now if you want to install any other ROM like cm13
Procedure for ROM installation
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
Official method is worst. Its not like Motorola who gives unlock code within a min.
Try unofficial above method
Click to expand...
Click to collapse
tthanks a lot for the steps. btw which twrp does this zip includes ? safe or alka or any other ?
can i flash miui europe with this unlock method? do i have to take an additional step?
smustafasms said:
tthanks a lot for the steps. btw which twrp does this zip includes ? safe or alka or any other ?
Click to expand...
Click to collapse
Try safe twrp
[email protected] said:
Try safe twrp
Click to expand...
Click to collapse
if i do this proceedure and doesnt flash rom afterwards will my existing miui8 stable boot normally ? or its important to flash custom rom ?
thanks for ur help
smustafasms said:
if i do this proceedure and doesnt flash rom afterwards will my existing miui8 stable boot normally ? or its important to flash custom rom ?
thanks for ur help
Click to expand...
Click to collapse
Yes you need to flash a ROM. Whether it is official miui 8 or beta miui 8 or any custom ROM. Cm13 and RR v5.8.0 7.1-N is better.
Now if you need your ROM back with twrp and root access. Just install miui 8 official ROM through twrp and don't try to change the recovery its the safe twrp I provided with. And its important for unofficially unlocked bootloaders like you.
Since it is official miui 8 so it will block your bootloader but to prevent this just install universal boot image patcher after installing this ROM.
You can find it on net and after that reboot and install. Now to get root access download and install SuperSU zip from net via twrp and reboot.
[email protected] said:
Yes you need to flash a ROM. Whether it is official miui 8 or beta miui 8 or any custom ROM. Cm13 and RR v5.8.0 7.1-N is better.
Now if you need your ROM back with twrp and root access. Just install miui 8 official ROM through twrp and don't try to change the recovery its the safe twrp I provided with. And its important for unofficially unlocked bootloaders like you.
Since it is official miui 8 so it will block your bootloader but to prevent this just install universal boot image patcher after installing this ROM.
You can find it on net and after that reboot and install. Now to get root access download and install SuperSU zip from net via twrp and reboot.
Click to expand...
Click to collapse
in edl mode when i try to run flash flash twrp.bat file its get stuck on waiting for device
smustafasms said:
in edl mode when i try to run flash flash twrp.bat file its get stuck on waiting for device
Click to expand...
Click to collapse
Oh no. This problem still continues.
I think you have to flash global kenzo 7.0 ROM through mi flash program on PC and then proceed to edl and flashing twrp.
I will be posting the instructions. Today only.
But I have unlocked it without this method
+1 , I get waiting for device also - because cannot see adb devices Drivers are installed
and when i try flashing a developer rom through miphone tool , im always getting errors
Hi everyone
Just it seems im the only one having problems with this because i cant find any solution to this.
I have Note 5 Plus with unlocked bootloader and today i wanted to install twrp and root. I installed all the drivers tried to install twrp with adb but like always only boots to Mi-Recovery but no twrp. I tried to boot to twrp with adb command but just stucks at the booting screen.
I tried 3 different twrp.imgs but same thing every single time...
Im running 9.5.12.0 (OEICNFA) firmware if thats important
Thanks in advance for any help !
braacic17 said:
Hi everyone
Just it seems im the only one having problems with this because i cant find any solution to this.
I have Note 5 Plus with unlocked bootloader and today i wanted to install twrp and root. I installed all the drivers tried to install twrp with adb but like always only boots to Mi-Recovery but no twrp. I tried to boot to twrp with adb command but just stucks at the booting screen.
I tried 3 different twrp.imgs but same thing every single time...
Im running 9.5.12.0 (OEICNFA) firmware if thats important
Thanks in advance for any help !
Click to expand...
Click to collapse
Hello there ,
I guess 9.5.12 is older version , mine was (9.5.4)
I am using RWRP
first of all download fastboot rom (9.5.4) and flash it using mi-flash tool
(if u dont know how to flash miui rom then let me know...)
steps to install TWRP :
1) dwn rwrp
2) put device in fastboot mode and open cmd
3) check fastboot mode by using command :
fastboot devices
hit enter
it will show some ID etc stuff...
4) command :
fastboot flash recovery recovery_name.img
hit enter
5) it will show again 10-12 lines indicating a success in flashing recovery.
6) now while ur device is in fastboot mode ,
press and hold vol up + power button
phone will boot into recovery
7) (if u flash RWRP then)
some text will be displayed in chinese or etc...
dont check the checkbox
slide the slider and change lang
n then root ur phone using magisk or super-su.
video Link to root :
https://www.youtube.com/watch?v=qLO1SymBaNk
first of all download fastboot rom (9.5.4) and flash it using mi-flash tool
(if u dont know how to flash miui rom then let me know...)
Thanks for the fast reply.
Yeah i definitely need help with flashing the rom but i after that i think I'll handle the rest easy
braacic17 said:
first of all download fastboot rom (9.5.4) and flash it using mi-flash tool
(if u dont know how to flash miui rom then let me know...)
Thanks for the fast reply.
Yeah i definitely need help with flashing the rom but i after that i think I'll handle the rest easy
Click to expand...
Click to collapse
haha....no problem
1) download official rom for Rn5 (fastboot 9.5.4)
u can get that link from Google lol
2) dwn Mi-Flash and open it
3) select ur rom path (till outside folder name Images)
it will look like this ... "D:\rom\tissot_images_7.11.18_7.1"
4) boot RN5 in fastboot mode
5) connect to lappy/pc
6) click on refresh button (u will see ur fastboot ID in 'id' column of Mi-flash)
7) select an option from bottom right corner : flash all something like this
8) click on flash and ur device will boot automatically
rasik107 said:
haha....no problem
1) download official rom for Rn5 (fastboot 9.5.4)
u can get that link from Google lol
2) dwn Mi-Flash and open it
3) select ur rom path (till outside folder name Images)
it will look like this ... "D:\rom\tissot_images_7.11.18_7.1"
4) boot RN5 in fastboot mode
5) connect to lappy/pc
6) click on refresh button (u will see ur fastboot ID in 'id' column of Mi-flash)
7) select an option from bottom right corner : flash all something like this
8) click on flash and ur device will boot automatically
Click to expand...
Click to collapse
9.5.4 is available only for India. Should i install Indian version or Global? Because the latest global version is 9.5.3. i cant find 9.5.4
braacic17 said:
9.5.4 is available only for India. Should i install Indian version or Global? Because the latest global version is 9.5.3. i cant find 9.5.4
Click to expand...
Click to collapse
yup.. u can flash indian version... no issues...
go to this link
http://en.miui.com/a-234.html
search for this one n dwn fastboot file.. approx 2gb
★ Redmi Note 5 India Latest Global Stable Version Fastboot File Download
rasik107 said:
yup.. u can flash indian version... no issues...
go to this link
http://en.miui.com/a-234.html
search for this one n dwn fastboot file.. approx 2gb
★ Redmi Note 5 India Latest Global Stable Version Fastboot File Download
Click to expand...
Click to collapse
I downloaded everything but i just keep getting error at the start of flashing.
I think I'll just give up on this.
braacic17 said:
I downloaded everything but i just keep getting error at the start of flashing.
I think I'll just give up on this.
Click to expand...
Click to collapse
what is that error ?
@braacic17
and one thing
create folder on desktop
(folder name should not contain any spaces)
extract ur zip in this folder
and give path till ur outside folder in mi-flash
like
rom/vince_global_images_V9.5.4.0.NEGMIFA_20180405.0000.00_7.1_global_22912b7715
This might help you after realizing that you want to install custom ROM again after upgrading to android 11 MIUI but you cannot install android 10 or 11 based ROM and stuck with either boot loop or android rescue party.
WARNING: This might wipe every writable partition. Charge your phone at least 20% or more to prevent from destroying these partitions.
Instructions:
1. Download firmware from here
2. Download full ROM (either recovery or fastboot) from here
3. Save the firmware zip file it in either internal storage or sdcard. Reboot to TWRP afterwards
4. Tap install and find the zip file in your storage and install. Wait for a couple of seconds to get done.
To install full ROM
Recovery
1. After installing firmware from recovery mode, don't reboot. If you reboot the system it will fail to boot. Boot to fastboot if you fail this step and flash a recovery image. Proceed with next step.
2. Install full ROM flashable zip from sdcard or internal storage.
3. Format /data. Reboot.
Using fastboot
1. Boot from fastboot mode
2. Extract full ROM fastboot zip file.
3. Open miflash and locate the fastboot folder.
4. Choose flash_all. Click start.
5. The phone reboots itself. Boot to recovery mode and wipe data.
All done. The phone is now downgraded from android 11 back to android 10.
Note: I got 2 anti triggered when attempting to downgrade the phone using recovery and fastboot without installing firmware zip file first. RIP me I guess I voided my warranty anyways so doesnt matter as I already applied some insurance for my device.
TL;DR: Installed Recovery will get erased as I mentioned in WARNING. Please don't skip every step.
Edit: since it made confusion, I split steps for recovery and fastboot mode.
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
PYCON said:
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
Click to expand...
Click to collapse
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Steelrock said:
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Click to expand...
Click to collapse
Ok, ok, good to know. I'm just curious... I'll remain with A10 till when A11 will be good enough to be used as a daily driver
Hi. Does this method requires unlocked bootloader? Thanks
hi. this method not working for me !
*phone is unlocked !
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Alin45 said:
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Click to expand...
Click to collapse
reboot with bootloop and again. and just miui 12 a11 or rom with selinux permissive working for flash.
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
did you try to flash firmware file from twrp recovery first? also that error means that a checkpoint failed which you need to disable or remove in configuration settings.
tourofeio said:
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
Click to expand...
Click to collapse
did you tried recovery or fastboot flashing? and did you installed firmware first before installing full rom?
endva3 said:
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
Click to expand...
Click to collapse
i only tried recovery method and it works fine after days of trying. 12.0.6 android 11 is still buggy and miui needs to fix it a lot. most of apps are not well optimized for this flavor.
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Steelrock said:
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Click to expand...
Click to collapse
i did the same, but looking to partitions of system, product and vendor, i understand that flashing the files via recovery and fastboot they dont write in that partitions.
looks like the partitions are read only. thanks
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
tourofeio said:
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
Click to expand...
Click to collapse
Most probable, u forgot to do a Format data (yes) before reboot to system.
endva3 said:
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
Click to expand...
Click to collapse
Did you flash it from the built-in recovery or with MiFlash? (My 167 hour waiting period ends tomorrow)
Solved people. change the version of the Mi Flash.
there is no forums for redmi 10
San2005 said:
there is no forums for redmi 10
Click to expand...
Click to collapse
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
joke19 said:
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
Click to expand...
Click to collapse
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
San2005 said:
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
Click to expand...
Click to collapse
How did you get miui 13 mine is stuck on 12.5 and i have some bugs that might get solved with a update.
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot [name of the file twrp].img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
install magisk.zip if you want
Reboot system
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english :/
alan7283 said:
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot twrp13.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
Reboot system
If you prefer orange fox recovery, go in the twrp, flash boot-orangefox.img in the recovery and reboot !
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english
Click to expand...
Click to collapse
You got MIUI 13 ?
Yes
alan7283 said:
Yes
Click to expand...
Click to collapse
Howw ??? OTA ?
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
alan7283 said:
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
Click to expand...
Click to collapse
I would love too but won't I lose warranty?
dda7lite said:
I would love too but won't I lose warranty?
Click to expand...
Click to collapse
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
alan7283 said:
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
Click to expand...
Click to collapse
Your sure? because I can't lose my 3 year warranty
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
alan7283 said:
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
Click to expand...
Click to collapse
Yeah and I will probably not flash it today I might sent it to warranty first because it's giving me a really weird problem
What problem?
alan7283 said:
What problem?
Click to expand...
Click to collapse
When I plug in charger phone immediately becomes unresponsive, touch stops and won't turn on (only with fingerprint)
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
alan7283 said:
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
Click to expand...
Click to collapse
You can write the tutorial if you want and I'll save it
dda7lite said:
You can write the tutorial if you want and I'll save it
Click to expand...
Click to collapse
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
alan7283 said:
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
Click to expand...
Click to collapse
I have 2 questions does it work on Redmi 10 2022 and don't it get Bricked if I lock bootloader with other region ?
Hi, I'm trying to update my MIUI version to MIUI 13 however nothing is working, I am aware I've got a locked bootloader which is why I'm only trying to update via the Updated in Settings an odd thing is that my MIUI version is different from any version I've seen downloadable.
My version is RJBEUSF
EEA version is RJBEUXM
What to do?
Thanks
monarchgaming_ said:
Hi, I'm trying to update my MIUI version to MIUI 13 however nothing is working, I am aware I've got a locked bootloader which is why I'm only trying to update via the Updated in Settings an odd thing is that my MIUI version is different from any version I've seen downloadable.
My version is RJBEUSF
EEA version is RJBEUXM
What to do?
Thanks
Click to expand...
Click to collapse
if you can't update via settings
reset device and try again if fail
then bootloader should be unlocked to try the 2nd official way
unlock bootloader with "mi unlock" on any pc or laptop
then download your desired ROM and flash it with "mi flash"
you can also relock bootloader again while flashing with mi flash
mong786 said:
if you can't update via settings
reset device and try again if fail
then bootloader should be unlocked to try the 2nd official way
unlock bootloader with "mi unlock" on any pc or laptop
then download your desired ROM and flash it with "mi flash"
you can also relock bootloader again while flashing with mi flash
Click to expand...
Click to collapse
If I want to relock bootloader do I need my specific device's MIUI ROM? I'm trying to download it via the Settings but I think it's a "carrier" based MIUI rom and it's really limiting.
Only reason that I would want this is for resell value. Easier to sell a stock device than an open bootloader one.
Thanks btw for answering.
monarchgaming_ said:
If I want to relock bootloader do I need my specific device's MIUI ROM? I'm trying to download it via the Settings but I think it's a "carrier" based MIUI rom and it's really limiting.
Only reason that I would want this is for resell value. Easier to sell a stock device than an open bootloader one.
Thanks btw for answering.
Click to expand...
Click to collapse
you can only flash with pc or laptop following way
requirements
1.pc/laptop with adb drivers
2.unlocked bootloader device
yes you need fastboot rom flashing with "mi flash" to relock the bootloader
Official Roms for Mi10 (UMI) you can download from here and select fastboot while downloading not recovery rom
extract downloaded rom in c drive
download latest mi flash and extract this in c drive also
run mi flash select rom, attach your device in fastboot mode by pressing vol down + power down
and hit flash button, attaching screen shot also
hope this will help
i have same device, and this mi flash version worked good for me (MiFlash 2021.2.26.0)
i was getting problems with latest version
mong786 said:
you can only flash with pc or laptop following way
requirements
1.pc/laptop with adb drivers
2.unlocked bootloader device
yes you need fastboot rom flashing with "mi flash" to relock the bootloader
Official Roms for Mi10 (UMI) you can download from here and select fastboot while downloading not recovery rom
extract downloaded rom in c drive
download latest mi flash and extract this in c drive also
run mi flash select rom, attach your device in fastboot mode by pressing vol down + power down
and hit flash button, attaching screen shot also
hope this will help
i have same device, and this mi flash version worked good for me (MiFlash 2021.2.26.0)
i was getting problems with latest version
Click to expand...
Click to collapse
Thank you. Will try once it lets me unlock bootloader as currently I'm still 120hours away.