RN3P Wont turn on - Xiaomi Redmi Note 3 Questions & Answers

Hello.
I had my smartphone on 30-40% of battery and i locked the screen. After a while i tried to unlock the device but seems like it was turned off so i tried to start the device again and it wont boot, cant boot recovery or anything i tried almost everything. If i charge the phone the led starts to blink red but after a while it stopped and there is no light right now, although it will flash red light if i try to turn the device on while its charging.
Please help!! I just bought the phone like 3 weeks ago

It could be a hardware fault, and so it's a warranty case.
But before: try an other charger. Let it plugged it at least half hour. Press and keep power button at least 30 seconds. If it doesn't start then it's a hardware fault. It happens...

Seems like its dead. Tried that, also i let the phone charging all night, still nothing. No more red light unless i press the power button for a while.

Try to connect to PC. Check what it shows in device manager.
Sent from my Redmi Note 3 using Tapatalk

sagar1212 said:
Try to connect to PC. Check what it shows in device manager.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Blinking red light but cant see anything related to the phone on device manager

Is it is shown as unknown device
Sent from my Redmi Note 3 using Tapatalk

sagar1212 said:
Is it is shown as unknown device
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Not showing anything, tried to reconnect and changing cable but nothing I guess its warranty material

After connecting have you pressed down power button
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 09:39 AM ---------- Previous post was at 09:30 AM ----------
If its in these case then your phones motherboard died
Sent from my Redmi Note 3 using Tapatalk

Ye, i tried that and seems like its dead. Funny that this happen just 1 day after i update to official build of Miui8.

Related

[Q] ِDead Xperia Z Ultra

Hello
I have a Xperia Z Ultra, one week ago I installed new firmware with flashtools; after flashing I tried to turn the phone on but It didn't turn on
I tried to connect to flashtools again but didn't work.
I connected the phone into the charger for long hours after hours now when I connect the phone into the charger or usb cable the led notification just start blinking
when I connect the phone with usb into computer. it shows connect and disconnect, for ever and fast
Is there any way to fix my phone without open the back of the phone?
Are you sure, you have enough battery power?
Sent from my C6833 using xda premium
It's not dead. Could you please tell us what you did? What did you flash? Are you rooted? Is your bootloader unlocked?
Sent from my C6806_GPe using Tapatalk
prewed said:
Are you sure, you have enough battery power?
Sent from my C6833 using xda premium
Click to expand...
Click to collapse
when I flashed it, the phone had about 35%
after that I connected into charger for about 12 hours
LordManhattan said:
It's not dead. Could you please tell us what you did? What did you flash? Are you rooted? Is your bootloader unlocked?
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
I just flash the C6802_14.2.A.0.290_Generic_ME.ftf two days after buying.
NO ROOT , NO unlock
I did nothing
What happens when you push and hold VOL UP at the same time as you connect your Ultra to your computer? Does a blue LED light up?
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
What happens when you push and hold VOL UP at the same time as you connect your Ultra to your computer? Does a blue LED light up?
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
no it doesn't
but when i connect it with usb I push and hold power and vol up, I can feel 3 vibration, if I hold them for long time after every 5 sec I can feel it again
EhsanXs said:
no it doesn't
but when i connect it with usb I push and hold power and vol up, I can feel 3 vibration, if I hold them for long time after every 5 sec I can feel it again
Click to expand...
Click to collapse
Okay, so your Ultra isn't actually off when you push those buttons and feel the three vibrations. It shuts completely down when you feel those vibrations. Do what I wrote in the previous post now. It has to be completely off for it to work. Again, look for the blue LED above the screen.
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
Okay, so your Ultra isn't actually off when you push those buttons and feel the three vibrations. It shuts completely down when you feel those vibrations. Do what I wrote in the previous post now. It has to be completely off for it to work. Again, look for the blue LED above the screen.
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
It doesn't work with fast boot or flash mode
it just vibrations not any more, it wont turn off
after pushing those bottons, the led notification starts blinking, I can't turn the phone off
Open up the flap on the right and push the red button.
Sent from my C6806_GPe using Tapatalk
---------- Post added at 07:51 PM ---------- Previous post was at 07:50 PM ----------
You'll need something pointy. Its the red button with the SIM tray
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
Open up the flap on the right and push the red button.
Sent from my C6806_GPe using Tapatalk
---------- Post added at 07:51 PM ---------- Previous post was at 07:50 PM ----------
You'll need something pointy. Its the red button with the SIM tray
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
It works like those buttons, right?
I used that but no change
EhsanXs said:
It works like those buttons, right?
I used that but no change
Click to expand...
Click to collapse
Yeah, it should power it off like the other key combo. Okay, so you're not connected to the computer when you power it off right? Because that won't work since the phone will try to charge the battery and boot up the charging screen, which it won't be able to do, and therefore begin with the red LED blinking.
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
Yeah, it should power it off like the other key combo. Okay, so you're not connected to the computer when you power it off right? Because that won't work since the phone will try to charge the battery and boot up the charging screen, which it won't be able to do, and therefore begin with the red LED blinking.
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
that's right
what should I do?
I charged it about 12 hours
EhsanXs said:
that's right
what should I do?
I charged it about 12 hours
Click to expand...
Click to collapse
One think you can try is connect the phone to the PC, hold the volume up/down key and press the red rest key at the same time, might just catch the flashmode/fastboot.
I have also read that some times you have to let the phone run flat, charge with a wall charger, then try the flashmode.
I think the problem might be the lack of charge when you flashed the .290 ftf. I have seen the battery drop by over 40% on a flash of .290 - it does some weird thing with the calibration I think.
blueether said:
One think you can try is connect the phone to the PC, hold the volume up/down key and press the red rest key at the same time, might just catch the flashmode/fastboot.
I have also read that some times you have to let the phone run flat, charge with a wall charger, then try the flashmode.
I think the problem might be the lack of charge when you flashed the .290 ftf. I have seen the battery drop by over 40% on a flash of .290 - it does some weird thing with the calibration I think.
Click to expand...
Click to collapse
I tried but it didn't work. just show connect to the computer _ (not flash mode or fastboot)_ and disconnect, it repeats since the phone has connecting with pc
connect - disconnect-connect - disconnect- ....
EhsanXs said:
I tried but it didn't work. just show connect to the computer _ (not flash mode or fastboot)_ and disconnect, it repeats since the phone has connecting with pc
connect - disconnect-connect - disconnect- ....
Click to expand...
Click to collapse
Try to run the battery down and see if that shuts it off. It might take a very long time since there's no screen on to consume the battery power. But do try to run the battery flat.

My Z2 just died. HELP.

So I've been using my phone as per normal, and it suddenly switches itself off and wont turn on.
If I plug it in to charge (the batter was at 40%) I just get a blinking RED LED.
Any help / ideas guys?!
Try to press volume up and power in the same time. If it vibrates 3 times it should start normally...
Sent from my D6503 using Tapatalk
Fenix said:
Try to press volume up and power in the same time. If it vibrates 3 times it should start normally...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Hi Fenix
Have tried that with and without a charging lead connected and no joy. The red LED just continues to blink.
Have also tried, again with and without charge, to press the red button next the sim card slot and no luck.
How about volume down and power?
Sent from my D6503 using Tapatalk
Fenix said:
How about volume down and power?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Same result.
Planning to leave the phone OFF charge all night and see if that helps, and then maybe do the opposite and keep it ON charge for a few hours maybe.
Any other advice?
Have you tried a system reset
(you can use sony PC companion to do this)
(repair device)
I have this same problem.
I have reset and re installed the rom via pc companion and same problem.
Basically the phone will not charge via the magnetic connector at all.
if you switch off the phone it will not stay off, it keeps turning its self back on again and boot looping: displaying the sony logo, then off, then sony logo again.
If you hold the power button down for 20 seconds whilst on a Sony logo, the phone boots to the experia logo and boots normally.
Problem is the phone will NOT switch off and half the time it wont come back on. Its basically a lottery on whether the phone will come back at all.
Update - managed to get the phone switched on after leaving it on charge all night. Had to hold the power button down for 30 secs to get to my home screen as otherwise it was just looping to the Sony logo.
However, now, the phone is not charging - it detects that a charger is connected but the battery level is not going up and the LED is constant orange.
What to do?
I would flash a.2.69 firmware if you don't have it already.
Sent from my D6503 using Tapatalk
Fenix said:
I would flash a.2.69 firmware if you don't have it already.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
I'm a newb with these things - is there link for how to flash?
Not sure if it makes a difference but this phone is from Vodafone and I believe they've locked the bootloader or something similar?
Also noticed that the phone 'thinks' its still charging even without a charger connected - and the orange LED is constant.
Looks like the battery is kabooshed?
I think u should give the phone in for warranty.
Sent From My Nexus 5 Stock 4.4.2
paras said:
I think u should give the phone in for warranty.
Sent From My Nexus 5 Stock 4.4.2
Click to expand...
Click to collapse
This!!!
Seriously, it's well within swap out time let alone repair. Get it swapped.
Sent from my D6503 using Tapatalk
corallus said:
This!!!
Seriously, it's well within swap out time let alone repair. Get it swapped.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
True there is no reason to mess with the phone coz i u might trigger sine warranties issues.
Sent From My Nexus 5 Stock 4.4.2
I've just been to the O2 store and they said bring it back with the receipt and they will swap it over for a new one.
When
dutchtrance said:
I've just been to the O2 store and they said bring it back with the receipt and they will swap it over for a new one.
When
Click to expand...
Click to collapse
That's great
Sent From My Nexus 5 Stock 4.4.2
Adding to the above.
Received my Z2 on O2 onFriday 2nd, Tried charging it this morning and red charging light was on then started flashing.
That was trying to charge via a usb cable to the magnetic contact.
Re tried using standard usb cable.
Will not start regardless of what I do, on button, on + volume up, on + volume down.
Trip to O2 after work tonight to take it back.
May be a problem with the magnetic charging system, somehow shorting something out, for me anyway.
Same here, Need to return it to T-Mobile.
Same issue,
Went Off, never to be able to turn the phone on again.
When connected to the Charger, the red light blinks faster.
When connected to USB red blinking led, blinks slower.
Does not go 'On' anymore.
Recovery from pc compannion does not work.
The Update tool send by the sony technical suppport also did not recognise the device.
Windows does not recognise it.
Volume Up + power does not work
Volume Down + Power does not work
Volume Up of Down (phone turned off) connecting with USB does not work.
Red button next to the sim card does not reset the phone.
It is a Brick now, hope sony is good and replaces it with a NEW one.
I need help .. i was normally use my sony z2 d6503 and it turn off itself and i cant open it even if i put it charge only red led no logo no charging logo .. all black ..

Screen of Death

Hi all,
Had the phone for a few weeks, no problems at all until today. Recieved a magnetic charging adaptor (the one that the micro USB plugs into) and that connects to the side of the phone.
Within seconds of this happening the screen turns off and since then i cant get it to turn back on. Ive tried the following:
1. Remove sim card and storage card
2. Power button pressed for more than 10 seconds
3. Power button and volume up same time for more than 10 seconds
4. Power button and volume down same time for more than 10 seconds
Im at a loss how to fix this. Battery was more than 80% when it happended so its not that but when on charge, i get a flashing red light (never seen before, different to the orange solid charging light).
Is it bricked etc.
I havent tried a hard reset (little red button) but dont want to lose my data so leaving that as a last resort
Ps Phone is stock, not flashed, rooted etc and no dodgy apps to corrupt the phone in any way
I would be willing to send to Sony but if they are just going to do a hard reset, id rather attempt that myself and save weeks in waiting for them to do this.
Any ideas greatly appreciated
Little red button is like a restart, you wont loose anything by pressing it
Sent from my D6503 using Tapatalk 2
feis said:
Little red button is like a restart, you wont loose anything by pressing it
Sent from my D6503 using Tapatalk 2
Click to expand...
Click to collapse
sorry should of mentioned ive tried this without success. Screen still wont turn on (i assume phone too as i cant hear any sounds) and still have the red flashing light.
What i meant before was that i havent pressed the red button for 3 seconds to simulate a hard reset (well i read that somewhere on net as to how to hard reset it)
Update: I cant even hard reset it, nothing happens so its definitely bricked
Hopefully only being 1.5 weeks old, ill get a replacement vs Optus/Sony trying to fix it.
I hope this helps but if you plug it in while pressing the vol+ button does the led turn blue? if it does then do that and fastboot reboot
Did you plug it in the right way round?
Sent from my D6503 using Tapatalk
corallus said:
Did you plug it in the right way round?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Sony are pretty good in Australia. You should have a 30 day handset guarantee and instant replacement. :good:
harrold11237 said:
I hope this helps but if you plug it in while pressing the vol+ button does the led turn blue? if it does then do that and fastboot reboot
Click to expand...
Click to collapse
Unfortunately its either no light or flashing red when plugged on charge. vol+ or any combination of vol-, vol whilst holding power etc all do nothing
I used to be able to bring my S3 back from death and that was rooted, custom kernel, ROM etc so disappointed this new stock Sony died in less than 2 weeks
corallus said:
Did you plug it in the right way round?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yep although without being plugged in the magnetic connector will adhere either way. The one i have has the symbol facing up but if you were in a hurry, fumbling around at night whilst putting it on charge etc, i wouldnt have thought it would fry the motherboard so that it bricks the phone.
Im paranoid about the magnetic charging option.
In future ill just stick with the microUSB lol
cheetah2k said:
Sony are pretty good in Australia. You should have a 30 day handset guarantee and instant replacement. :good:
Click to expand...
Click to collapse
Ordered it from Optus so they will send a reply paid packaging, i send back my phone and within 3 business days they'll send it back fixed (if easily done which i know its not) or a replacement.
Alternative, go into an Optus shop with their purchase order, papaerwork when purchased etc and if they believe its faulty, they'll issue a new one (id be shocked if they can turn it on).
They said after 30 days its a more difficult process.
I even had a tempered glass screen protector on it but cant be bothered trying to fight for that. I just want a new phone but annoyed i lost photos, videos and other files that was stored internally. I have no way to retreive, back it up now.
Im keeping everything backed up and on my SD card from now on. Dont trust the internal storage for situations just like this
I used similar adapter with z1 and if I connected wrong way it would cause phone to cut out and reset.
The little Red button, plug your phone in correct USB charge port and press and hold the red reset switch for 10 seconds.
Sent from my D6503 using Tapatalk
corallus said:
I used similar adapter with z1 and if I connected wrong way it would cause phone to cut out and reset.
The little Red button, plug your phone in correct USB charge port and press and hold the red reset switch for 10 seconds.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
I know its magnetic etc but really wouldnt have thought it would cause a reset or im my case a bricked phone (and in my case i had it turned around the right way).
I tried again and held the red button down for 10 seconds and on second attempt 20 seconds whilst on charge but unfortunately nothing.
Warranty it, and I wouldn't mention the magnetic charger if I were you.
Sent from my D6503 using Tapatalk
---------- Post added at 12:23 PM ---------- Previous post was at 12:22 PM ----------
It's only held in by magnets, the connections are still + & - either side.
Sent from my D6503 using Tapatalk
corallus said:
Warranty it, and I wouldn't mention the magnetic charger if I were you.
Sent from my D6503 using Tapatalk
---------- Post added at 12:23 PM ---------- Previous post was at 12:22 PM ----------
It's only held in by magnets, the connections are still + & - either side.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Agreed
Just a second, there's a wrong way and a right way of connecting these magnetic chargers?
That would be terrible and such an easy mistake to make!
At the very least there should be a glow in the dark "THIS WAY UP!" sticker on it, plus a red warning letter to accompany it!
I wouldn't think so but in this case it's irrelevant anyway as it was correct way up.
Sent from my D6503 using Tapatalk
naujoks said:
Just a second, there's a wrong way and a right way of connecting these magnetic chargers?
That would be terrible and such an easy mistake to make!
At the very least there should be a glow in the dark "THIS WAY UP!" sticker on it, plus a red warning letter to accompany it!
Click to expand...
Click to collapse
My thoughts exactly.no warning label, disclosure etc. It was daylight so was watching what I was doing as I just received it, first time using but I can imagine many fumbling around connecting it before sleeping, maybe in the car or just in a rush applying it.
It's like the micro usb cable, who looks when connecting it to the phone,I don't. If it doesn't fit,I just turn it around and connect it. Besides a magnetic dock which forces you to connect it a certain way I definitely won't use a magnetic adaptor ever again, far to easy to stuff up and in my case it stuffed up my phone even though it was connected properly so it's like Russian roulette lol
Sent from my GT-I9300
Tell you what I'll test this now. Gimme 2 mins. If I don't reply I fooked my phone.
Sent from my D6503 using Tapatalk
---------- Post added at 10:15 PM ---------- Previous post was at 10:09 PM ----------
It just doesn't charge if wrong way round. No reset, no shutdown, nuttin'.
Sent from my D6503 using Tapatalk
corallus said:
Tell you what I'll test this now. Gimme 2 mins. If I don't reply I fooked my phone.
Sent from my D6503 using Tapatalk
---------- Post added at 10:15 PM ---------- Previous post was at 10:09 PM ----------
It just doesn't charge if wrong way round. No reset, no shutdown, nuttin'.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
You're brave lol. In my situation though it was instant when the phone died when correcting the charger.
Either faulty charger or phone, hardware fault.
I'm still not going to try again when I get a new phone lol
Sent from my GT-I9300
Not brave, 2 dead pixels. Looking for the excuse to warranty it ?
Sent from my D6503 using Tapatalk

Phone wont turn on

Hello Guy,
I had kept My RN3 pro con charge last night and when I woke up, It was really hot and switched off. I tried to boot it up but no response. Tried to plug it in to the wall charger and notification LED started to blink. Tried to put it to fastboot mode but no success. Now when I am hooking it to PC no response. When I am hooking upto wall charger top left side is getting really hot on the back side.
What shall I do?
Thanks in advanced
sangalaviral said:
Hello Guy,
I had kept My RN3 pro con charge last night and when I woke up, It was really hot and switched off. I tried to boot it up but no response. Tried to plug it in to the wall charger and notification LED started to blink. Tried to put it to fastboot mode but no success. Now when I am hooking it to PC no response. When I am hooking upto wall charger top left side is getting really hot on the back side.
What shall I do?
Thanks in advanced
Click to expand...
Click to collapse
Try to go to fastboot, if it vibrates then display is dead.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 05:38 AM ---------- Previous post was at 05:37 AM ----------
And if it doesn't, better go to service centre, some circuit must have fired
Sent from my Redmi Note 3 using Tapatalk
As you see I have already mentioned about the fastboot. Went to service center and they say it is officially dead and mother board needs to be replaced.

I think I've bricked my phone - can anyone please help?

I have searched the forum but cannot find a solution that works for me....
I unlocked the bootloader, installed TWRP and the Resolution Remix ROM and that all worked fine. But I wanted to try a different ROM so I installed the Xiaomi.eu ROM and now my phone won't do anything at all. I don't think the EU ROM installed properly (although I did not get an error message when installing) and when I rebooted the phone it just went blank and now does not work at all.
No combination of buttons will turn the phone on or enter Fastboot or TWRP. I cannot do anything with the phone at all. Can someone please help?
Muppet101x said:
I have searched the forum but cannot find a solution that works for me....
I unlocked the bootloader, installed TWRP and the Resolution Remix ROM and that all worked fine. But I wanted to try a different ROM so I installed the Xiaomi.eu ROM and now my phone won't do anything at all. I don't think the EU ROM installed properly (although I did not get an error message when installing) and when I rebooted the phone it just went blank and now does not work at all.
No combination of buttons will turn the phone on or enter Fastboot or TWRP. I cannot do anything with the phone at all. Can someone please help?
Click to expand...
Click to collapse
Are you sure your phone is charged?
If it's charged, it at least would boot to the Mi Splash Screen. Put it to charge for some time.
Sent from my Redmi Note 4 using Thumbs
RKStyles said:
Are you sure your phone is charged?
If it's charged, it at least would boot to the Mi Splash Screen. Put it to charge for some time.
Sent from my Redmi Note 4 using Thumbs
Click to expand...
Click to collapse
It had 80% battery on it when I flashed the ROM so it must still have battery left.
Muppet101x said:
It had 80% battery on it when I flashed the ROM so it must still have battery left.
Click to expand...
Click to collapse
See, after flashing MIUI based ROM, or doing some changes to it, flashing LazyFlasher avoids the risks of Bootloop.
But it atleast should boot to the Mi logo screen.
Try holding the power key for 10+ seconds. It forces device to restart when it gets hanged. Try it.
Sent from my Redmi Note 4 using Thumbs
RKStyles said:
See, after flashing MIUI based ROM, or doing some changes to it, flashing LazyFlasher avoids the risks of Bootloop.
But it atleast should boot to the Mi logo screen.
Try holding the power key for 10+ seconds. It forces device to restart when it gets hanged. Try it.
Sent from my Redmi Note 4 using Thumbs
Click to expand...
Click to collapse
I've held down the power button for more than 10 seconds, even 2-3 minutes and nothing happens. I don't think it is in a bootloop, it is not doing anything at all - no Mi logo screen, no LED.
The only thing it does is flash a red LED light when it is connected to my laptop or the the main power but it definitely has charge on it.
Muppet101x said:
I've held down the power button for more than 10 seconds, even 2-3 minutes and nothing happens. I don't think it is in a bootloop, it is not doing anything at all - no Mi logo screen, no LED.
The only thing it does is flash a red LED light when it is connected to my laptop or the the main power but it definitely has charge on it.
Click to expand...
Click to collapse
See, if it's showing the red LED, just put it to charge with another charger. I had a RN3 stuck in the same situation, tried pressing the button for long and did everything I could get to know. But then left it to charge for half an hour with another charger and tried holding the power button once more and it did the job. Maybe it was my luck.
Sent from my Redmi Note 4 using Thumbs
RKStyles said:
See, if it's showing the red LED, just put it to charge with another charger. I had a RN3 stuck in the same situation, tried pressing the button for long and did everything I could get to know. But then left it to charge for half an hour with another charger and tried holding the power button once more and it did the job. Maybe it was my luck.
Sent from my Redmi Note 4 using Thumbs
Click to expand...
Click to collapse
OK, I am charging it now. I hope this is the problem but it doesn't make sense that it went from 80% to nothing in a few seconds.
RKStyles said:
See, if it's showing the red LED, just put it to charge with another charger. I had a RN3 stuck in the same situation, tried pressing the button for long and did everything I could get to know. But then left it to charge for half an hour with another charger and tried holding the power button once more and it did the job. Maybe it was my luck.
Sent from my Redmi Note 4 using Thumbs
Click to expand...
Click to collapse
I charged the phone for a while and the red light stopped flashing. The phone will still not turn on or go into fastboot or TWRP. When I hold the power button down for a while the red light starts flashing again.
Also, when I connect the phone to my laptop, Device Manager only recognizes the device as Qualcomm HS-USB QDLoader 9008 (COM4). It does not show up in any other way.
Muppet101x said:
I charged the phone for a while and the red light stopped flashing. The phone will still not turn on or go into fastboot or TWRP. When I hold the power button down for a while the red light starts flashing again.
Also, when I connect the phone to my laptop, Device Manager only recognizes the device as Qualcomm HS-USB QDLoader 9008 (COM4). It does not show up in any other way.
Click to expand...
Click to collapse
Refer to below link, second page. Might help you.
http://en.miui.com/forum.php?mod=viewthread&tid=324088&extra=page=1&page=2&mobile=2
Sent from my Redmi Note 4 using Thumbs
RKStyles said:
Refer to below link, second page. Might help you.
http://en.miui.com/forum.php?mod=viewthread&tid=324088&extra=page=1&page=2&mobile=2
Sent from my Redmi Note 4 using Thumbs
Click to expand...
Click to collapse
I've been reading that thread already. Which part of it are you referring to? The MiFlash tool does not see the phone when it is connected to laptop.
Muppet101x said:
I've been reading that thread already. Which part of it are you referring to? The MiFlash tool does not see the phone when it is connected to laptop.
Click to expand...
Click to collapse
Seriously, if I were facing this problem, I would have left my phone on charge and would have tried holding the power button again and again. Because it worked many times for me. A buggy RN3 made me suffer a lot this way. And it has worked.
But you may try the battery fix. Open the back case and do the required fix. I'll fetch you the related screenshot. Wait.
Sent from my Redmi Note 4 using Thumbs
I won't recommend doing this, but it is what it is.
Someone else might help you better. But this is all what I could get. Keep in mind this is for RN3. But except for the EDL method, all procedures are nearly same.
Bro the thing is... I had d same problem with my htc phone . And u did somthng wrong like i did . Just put ur ohone in charge for the whole day . And in an hour or so the phone ll restart itself . But one thing m pretty sure is ur phone is not charged
sanu26661 said:
Bro the thing is... I had d same problem with my htc phone . And u did somthng wrong like i did . Just put ur ohone in charge for the whole day . And in an hour or so the phone ll restart itself . But one thing m pretty sure is ur phone is not charged
Click to expand...
Click to collapse
OK, I'm gonna leave it charging. I know the phone had 80% battery left when this happened but I will try it.
Trying taking out the battery and get it charged from anywhere in ur local shops
---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------
Muppet101x said:
OK, I'm gonna leave it charging. I know the phone had 80% battery left when this happened but I will try it.
Click to expand...
Click to collapse
Yaa it must me 80% but wen ur device is bricked it keeps on ising the power . U might feel the heat
Muppet101x said:
OK, I'm gonna leave it charging. I know the phone had 80% battery left when this happened but I will try it.
Click to expand...
Click to collapse
Pls forget for once that your phone was charged, it's not charged right now or the battery connection is poor. I faced the red LED problem and charging and continous power button pressing was the only solution. And one more user is reporting the same. So, just forget for once that your phone is charged.
Sent from my Redmi Note 4 using Thumbs
Just to update. When I charge the phone the red light flashes for a couple of minutes and then stops. There is no yellow light to say that it is charging. This applies to both laptop and mains charging. I also took the back cover off and disconnected the battery and USB cable for a little while to make sure the phone was off before reconnecting.
I tried to connect to the phone with the MiFlash tool but it says it cannot read from the device. As I said before, when I connect the phone to my laptop Device Manager recognizes the device as Qualcomm HS-USB QDLoader 9008. Some threads seem to think this is a good thing but it hasn't helped me.
I am continuing to 'charge' the phone but does anyone have any advice if this doesn't help?
Muppet101x said:
Just to update. When I charge the phone the red light flashes for a couple of minutes and then stops. There is no yellow light to say that it is charging. This applies to both laptop and mains charging. I also took the back cover off and disconnected the battery and USB cable for a little while to make sure the phone was off before reconnecting.
I tried to connect to the phone with the MiFlash tool but it says it cannot read from the device. As I said before, when I connect the phone to my laptop Device Manager recognizes the device as Qualcomm HS-USB QDLoader 9008. Some threads seem to think this is a good thing but it hasn't helped me.
I am continuing to 'charge' the phone but does anyone have any advice if this doesn't help?
Click to expand...
Click to collapse
Did u try...press and hold volume down while holding connect usb cable with pc.
its also metod to boot into fastboot.
Dadovvv said:
Did u try...press and hold volume down while holding connect usb cable with pc.
its also metod to boot into fastboot.
Click to expand...
Click to collapse
I've tried all combinations of buttons but nothing works. The phone just won't turn on into any mode. If I can just turn it on I can flash it again and fix it I think.
The only response I'm getting is a blinking red light for a couple of minutes when connected to laptop or mains. Someone must know what this means?
Can anyone confirm that a blinking red light and the fact that the phone shows up as Qualcomm HS-USB QDLoader 9008 in Device Manager suggests that the phone is in EDL mode when connected to a laptop?

Categories

Resources